Sony Xperia C3, D2533, Xperia C3 Dual, S55t, S55u Go No Go Test
...
1290-5961 Rev 5
Sony Mobile Communications AB – Company Internal
Go/No Go Test
Xperia
TM
C3
D2533
Xperia
TM
C3 Dual
S55t, S55u, D2502
1290-5961 Rev 5
Sony Mobile Communications AB – Company Internal
2(11)
Test and Calibration Repair Instruction
CONTENTS
Go/No Go Testing ................................................................................. 3
1.1 Antenna Coupler D2502, D2533, S55t and S55u no LTE ................... 3
1.2 Antenna Coupler D2533 S55t and S55u no TD-SCDMA bands ......... 3
1.3 Attenuation Factors ............................................................................. 5
1.3.1 Loss Values – Antenna Coupler CMU-Z11, D2502 and D2533 ................. 5
1.3.2 Loss Values – Antenna Coupler CMU-Z11, S55t and S55u ...................... 6
1.3.3 Loss Values – Antenna Coupler CMW-Z11, S55t and S55u ..................... 7
1.3.4 Loss Values – Antenna Coupler CMW-Z11, D2533 ................................... 9
2 Revision History ........................................................................... 11
D2502 is only implemented in SERPII.
D2533 no LTE bands is implemented in SERPII.
S55t no TD-SCDMA, no LTE bands is implemented in SERPII.
S55t only TD-SCDMA bands is implemented in Sony Lector.
S55u no LTE bands is implemented in SERPII.
1290-5961 Rev 5
Sony Mobile Communications AB – Company Internal
3(11)
For more information on Antenna Coupler and Cable in shield box testing, refer to
1220-1336: Generic Repair Manual – electrical, section ‘Setup Go/NoGo Test’!
For part no’s on the equipment below, refer to the ‘Tools Catalogue/Matrix’!
1.1 Antenna Coupler D2502, D2533,
S55t and S55u no LTE
The following equipment has to be used:
Rohde & Schwartz RF Shield Package
- Rohde & Schwartz RF Shield Box CMU-Z11
- Rohde & Schwartz RF Coupler
- Grid Positioning Holder
RF Test Cable Flexible 1M
RF Adapter for RF Shield Box
Micro USIM Card, instrument specific
GSM-850/900/1800/1900
WCDMA-850/900/1900/2100
TD-SCDMA-BAND 34/39
Put the grid positioning holder with its reference point in
position F11 and place the phone as shown in the adjacent
picture.
A FEDB C G H I NMLJ K O P Q R
25
15
16
17
18
19
20
21
22
23
24
14
4
5
6
7
8
9
10
11
12
13
1
2
3
A FEDB C G H I NMLJ K O P Q R
25
15
16
17
18
19
20
21
22
23
24
14
4
5
6
7
8
9
10
11
12
13
1
2
3
1.2 Antenna Coupler D2533 S55t
and S55u no TD-SCDMA bands
The following equipment has to be used:
Rohde & Schwartz RF Shield Package
- Rohde & Schwartz RF Shield Box CMW-Z11
- Rohde & Schwartz RF Coupler
- Grid Positioning Holder
RF Test Cable Flexible 1M
RF Adapter for RF Shield Box
Micro USIM Card, instrument specific
GSM-850/900/1800/1900
WCDMA-850/900/1900/2100
LTE-BAND 1/3/7/8/38/39/40/41
Put the grid positioning holder with its reference point in
position K13 and place the phone as shown in the adjacent
picture.
Go/No Go Testing
This Go/No Go testing has to be carried out with an:
Antenna Coupler.
Test and Calibration Repair Instruction
1290-5961 Rev 5
Sony Mobile Communications AB – Company Internal
4(11)
Test and Calibration Repair Instruction
Go/NoGo Testing
Follow the directions stated in ‘Go/NoGo Test Script Parameters’ to be found in
1220-1336: Generic Repair Manual – electrical, together with the ‘Attenuation Factors’ below!
This phone is available in 4 versions, D2502, D2533, S55t and S55u including the following bands:
D2502:
GSM-850/900/1800/1900
WCDMA-850/900/1900/2100
D2533:
GSM-850/900/1800/1900
WCDMA-850/900/1900/2100
LTE Band 1/3/7/8/28 Not to be tested in SERP only in CMWRun
S55t:
GSM-850/900/1800/1900
WCDMA-850/900/1900/2100
LTE Band 1/3/7/38/39/40/41 Not to be tested in SERP only in CMWRun
TD-SCDMA-Band 34/39 Not to be tested in SERP only in Sony Lector
S55u:
GSM-850/900/1800/1900
WCDMA-850/900/1900/2100
LTE Band 1/3/7/41 Not to be tested in SERP only in CMWRun
Loading...