Sony PS-LX350H Reference Guide

3-864-750-12(1)

Ster eo Turntable System

Operating Instructions

PS-LX350H

WARNING

Precautions

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

For the customers in the U.S.A.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

On safety

• Before operating the unit, check that the operating voltage of your unit is identical with that of your local power supply.

• Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

• Unplug the unit from the wall outlet if it is not to be used for an extended period of time. To disconnect the cord, pull it out by the plug. Never pull the cord itself.

• The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, ever if the unit itself has been turned off.

• The nameplate indicating operating voltage, power consumption, etc. is located on the rear exterior.

On placement

• Place the unit on a level surface.

• Avoid placing the unit near electrical appliances (such as a television, hair dryer, or fluorescent lamp) which may cause hum or noise.

• Place the unit where it will not be subject to any vibration, such as from speakers, slamming of doors, etc.

• Keep the unit away from direct sunlight, extremes of temperature, and excessive dust and moisture.

Owner’s Record

The model number and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. PS-LX350H Serial No.

Keep the carton and packing materials. They provide an ideal container to transport the unit.

If you have any question or problem concerning your unit that is not covered in this manual, please consult your nearest Sony dealer.

CAUTION

On repacking

You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment.

Welcome!

Thank you for purchasing the Sony Stereo Turntable System. Before operating the unit, please read this manual thoroughly and retain it for future reference.

Convention

The following icon is used in this manual:

Indicates hints and tips for making the task easier.

TABLE OF CONTENTS

Getting Started

Unpacking 3 Assembling the Turntable 4 Hooking up the Turntable 5 Adjusting the Turntable 6

Operations

Playing a Record 7

Additional Information

Maintenance 8 Troubleshooting 9 Specifications 9 Parts and Controls 10

Unpacking

Check that you received the following items with your turntable:

• Platter (with drive belt) (1)

• Rubber mat (1)

• Dust cover (with hinges) (1)

• Counter weight (1)

• Cartridge and headshell (1)

• 45 r/min adaptor (1)

• Audio connecting cord (1)

Getting Started

Assembling the Turntable

6 Insert the headshell into the front of the tone arm.

Turn the locking collar in the direction of the arrow until the headshell is secure.

7 2

1 If your turntable is equipped with a voltage

selector, be sure to set the selector to your line voltage.

110V·120V

220V·240V

2 Carefully, place the platter on the spindle. 3 Using the ribbon, loop the drive belt around the

motor pully. After looping the belt, do not forget to remove the ribbon.

7 Insert the hinges on the dust cover into the hinge

pockets on the rear of the cabinet.

4 Place the rubber mat on the platter. 5 Slide the counter weight onto the shaft at the rear

of the tone arm and turn 3 or 4 times in the direction of the arrow.

+ 8 hidden pages