Sony PCS-XG100, PCS-XG77 System Integration Manual

HD VIDEO COMMUNICATION SYSTEM

PCS-XG100/XG77

System Integration Manual
1st Edition (PCS-XG100/XG77:Ver1.0)

©2013 Sony Corporation

PCS-XG100/XG77 System Integration Manual

Date

Contents

2013/9/25

1st Release

Release History

Contents

Section 1. Installation ........................................................................................................... 3

1.1. Supplied Accessories ........................................................................................... 3

1.2. Layout of Connectors ........................................................................................... 3

1.3. Camera Units ....................................................................................................... 4

1.3.1. 1st

1.3.2. 2

Camera Selection .................................................................................... 4

nd

Camera Selection .................................................................................... 5

1.3.3. Camera Cable ............................................................................................... 6

1.3.4. HDMI IN Conn ector (PCS-XG100S only) ..................................................... 7

1.3.5. Supported Input Signals................................................................................ 8

1.4. Using Microphones............................................................................................... 9

1.5. Audio Specifications an d Set t in gs ...................................................................... 12

1.5.1. Connector Input/Output Si gnals .................................................................. 12

1.5.2. Note on Using External Microphone ........................................................... 13

1.5.3. Audio Level Adjustment .............................................................................. 13

1.5.4. Audio Output Delay Detting (Setup→Audio 2) ........................................... 14

1.5.5. Audio input delay setting (Setup→Audio 2) ................................................ 14

1.5.6. Reversed MIC Inputs Fun ction (Setup→Audio 2) ...................................... 14

1.5.7. Echo Canceller ............................................................................................ 16

1.6. Connecting Monitor ............................................................................................ 18

1.7. Two Ser ial Ports ................................................................................................. 20

2

PCS-XG100/XG77 System Integration Manual

Section 1. Installation

For details on connection examples via a LAN or others, refer to the operating Instructions.

1.1. Supplied Accessories

PCS-XG100S PCS-XG77S
Camera Cable (3m) 1 pc 1 pc
PCSA-A1 Microphone (Cable length 8m) 2 pcs 1 pc
AC Adapter 1 pc 1 pc
HDMI cable (3m) 1 pc 1 pc
RF Remote Comman der 1 pc 1 pc
Size AA (R6) Batteries for Remote Commander 2 pcs 2 pcs
Manuals, Other papers 1 set 1 set

1.2. Layout of Connectors

For details on specifications for CAMERA IN, DVI-I1 IN, DVI-I2 IN, HDMI IN, HDMI 1/2 OUT
signals, refer to the operating i nst r uct ions.
For details on specifications for LAN 1, LAN2, ISDN UNIT connectors, refer to t he oper at ing
instructions.

3

PCS-XG100/XG77 System Integration Manual

Refer to Sections 1.3.3

Refer to Sections 1.3.4

(1) (2) (3) (4) (5) (6) (7) (8)

Rear Panel (Photo: PCS-XG100S)

(9) (10) (11) (12) (13) (14) (15) (16)

No Connector Remarks No Connector Remarks

(1) CAMERA IN

and 1.3.5

(2) HDMI IN *Note

and 1.3.5
(3) DVI-I 1 IN Refer to Section 1.3.5 (11) DVI-I OUT
(4) DVI-I 2(PC) IN Refer to Section 1.3.5 (12) LAN 1 *Note
(5) MIC(A1) IN Refer to Section 1.5.1 (13) LAN 2 *Note
(6) AUDIO 1 IN

AUDIO 2 IN
(7) AUDIO OUT (15) AUX CONTROL Refer to Section 1.7
(8) REC OUT (16) MAINTENANCE
*Note: HDMI IN, HDMI-2 OUT, and LAN2 connectors are not available on the PCS-XG77S.

HDMI-1 OUT and LAN1 are called HDMI OUT and LAN respectively for the PCS-XG77S.

(9) HDMI-1 OUT *Note Refer to Section 1.6

(10) HDMI-2 OUT *Note

(14) ISDN UNIT

1.3. Camera Units

Camera unit is not supplied with the codec.
For details on operations and setting s, refer to the operatin g instruct ions for the camera unit.

1.3.1. First

PCSA-CXG100

Video signal 1080 30p/720 30p *1 1080 60p/720 60p 720 60p
Horizontal field of view 55.4 degrees 70 degrees 70 degrees
Optical zoom (digital) 20x (12x) 10x (4x) 10x (4x)
Interface DVI-I DVI-I DVI-I
Others Exmor, Ceiling mountable *2
*1 Even when 720 60p was selected by the EVI-H100V/PCSA-CXG100, the PCS-XG100S recognizes

the connected camera and automatically encode s signa ls t o 720 30p.

*2 Turning on the IMAGE FLIP switch on the camera rear panel flips the image upside down.

Camera Selection

EVI-HD7V EVI-HD3V

/EVI-H100V

4

PCS-XG100/XG77 System Integration Manual

connector, only the video signal
can be input by using a

1.3.2. 2nd Camera Selection

Support Camera Interface Remarks

EVI-HD7V DVI-I
EVI-HD3V DVI-I
EVI-H100V DVI-I
EVI-HD1 YPbPr/RGB To connect the camera to DVI-I
BRC-H900 YPbPr/RGB
BRC-H700 YPbPr/RGB
BRC-Z700 YPbPr/RGB
BRC-Z330 YPbPr/RGB
HDMI Output Camera
(Handycam)

HDMI To connect the camera to DVI-I

connector, DVI-to-YPbPr cable
etc., is separately required

DVI-HDMI adaptor etc.

5

PCS-XG100/XG77 System Integration Manual

1.3.3. Camera Cable

3-meter long camera cable is supplied with the unit. If you wish to extend the camera cable,
do at your own responsibility.
Before starting actual operation, be sure to verify operation.

Symbol Description

A: CAMERA IN, B: MINI DIN (VISCA IN), C: DC IN, D: DVI-I IN

Cable Wiring

6

PCS-XG100/XG77 System Integration Manual

1.3.4. HDMI IN Connector (PCS-XG100S only)

An HDMI output camera like Handyca m can be co nnected to HDMI IN.
If using it as the second camera, make appropriate setting under “Camera” setup menu →
“Second Camera Input”.

Notes

・Playback of a Blu-ray disc cop y-guarded cannot be input to the HDMI IN connector as it

does NOT support H DCP.

・Supported HDMI version is 1.4b.
・Without HDMI IN, connect as shown in the figure below.

In case of not using HDMI IN
* Do the same way when
PCS-XG77S is used.

Audio Input

To send HDMI audio to a remote party, set “AUX” as “Audio Input”.
In order not to send HDMI audio t o a r em ot e par t y, set “MIC” as “Audio Input”.
The above settings are enabled regardless of “Link to Audio Input” setting.

Note

・Other AUX audio input will be ignored if set.

7