To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this CD/DVD player is harmful to eyes, do not
attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
This label is located on the bottom of the
chassis.
Note on the lithium battery
Do not expose the battery to excessive heat such as
direct sunlight, fire or the like.
Warning if your car’s ignition has no
ACC position
Be sure to set the Auto Off function
(page 39).
The unit will shut off completely and
automatically in the set time after the unit is
turned off, which prevents battery drain.
If you do not set the Auto Off function, press
and hold (SOURCE/OFF) until the display
disappears each time you turn the ignition off.
To cancel the demonstration (DEMO) display,
see page 40.
On safety
• Comply with the traffic laws in your country.
• For your safety, the monitor connected to the
VIDEO OUT turns off automatically when the
parking brake is not applied.
Preventing an accident
Pictures appear only after you park the car
and set the parking brake.
If the car starts moving during video
playback, pictures from the VIDEO OUT
automatically disappear after displaying the
following caution.
The pictures on the screen are turned off, but
audio source can be heard.
Video blocked for your
safety.
Do not operate the unit or watch the monitor
while driving.
Be sure to install this unit in the dashboard of
the car for safety. For installation and
connections, see the supplied installation/
connections manual.
5
Copyrights
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Manufactured under license
from Dolby Laboratories.
symbol are trademarks of Dolby Laboratories.
United States and/or other countries.
“DVD VIDEO,” “DVD-R,” “DVD-RW,”
“DVD+R,” and “DVD+RW” are trademarks.
“Dolby” and the double-D
Windows Media and the
Windows logo are trademarks
or registered trademarks of
Microsoft Corporation in the
®
DivX
, DivX Certified® and
associated logos are registered
trademarks of DivX, Inc.
THIS PRODUCT IS LICENSED UNDER THE
MPEG-4 VISUAL PATENT PORTFOLIO
LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR
DECODING MPEG-4 VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM
A VIDEO PROVIDER LICENSED BY MPEG
LA TO PROVIDE MPEG-4 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION INCLUDING
THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM
MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM
6
Playable discs and symbols used in this manual
This unit can play various video/audio discs.
The following chart helps you to check if a disc is supported by this unit, as well as what functions are
available for a given disc type.
Disc symbol in manualDisc format
DVD VIDEO
DVD-R*
1
/ DVD-R DL*1 / DVD-RW*
(Video mode/VR mode)
VIDEO
DVD+R*
1
/ DVD+R DL*1 / DVD+RW*
Video CD
(Ver. 1.0/1.1/2.0)
Audio CD
AUDIO
*1 Audio files can also be stored.
*2 Video/image files can also be stored.
Note
“DVD” may be used in this manual as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/
DVD +RWs.
CD-ROM*
2
/ CD-R*2 / CD-RW*
The following chart shows the supported compression formats and their file types.
Available functions differ depending on the format, regardless of disc type. The format symbols below
appear next to the description of functions available for that format.
Format symbol in manualFile type
MP3 audio file
WMA audio file
AAC audio file
JPEG image file
®
DivX
video file
MPEG-4
Tip
For details on compression formats, see page 44.
Note
Even compatible discs may not be playable on this unit, depending on their recorded condition.
MPEG-4 video file
1
1
2
7
Location and function of controls
Main unit
183 4567
2
SOURCE
MODE
q;
DSPL
OFF
SCRL
SEEK
SEEK
9qaqdqg
• Refer to the pages listed for details.
• Instructions in this manual generally describe
the controls on the card remote commander.
You can also use the controls on the main unit
if they have the same or similar names to those
on the card remote commander.
A SEEK +/– buttons page 14, 16, 18, 20
Disc*
1
:
Press to skip a chapter/track/scene/file.
Press and hold momentarily to reverse/fastforward disc.
Press and hold to reverse/fast-forward track.
Radio:
Press to tune in stations automatically.
Press and hold to find a station manually.
B (Browse) button page 29
To enter the Quick-BrowZer mode.*
C SOURCE/OFF button page 12, 13, 14,
15, 17
Press to turn on the power/change the source
(Radio/Disc/AUX).
Press for 1 second to turn off the power.
Press for more than 2 seconds to shut off
completely.
8
R
E
T
N
E
/
D
N
U
O
S
H
S
U
P
1PTY23456
ALBUMREPSHUF
AUX
qfqs
D Control dial/SOUND/ENTER button
page 12, 20
Rotate to adjust the volume/adjust a setting.
Press to open the sound menu/apply a
setting.
Press and hold to open the system setup
menu.
E Disc slot page 15, 17
F Display window
G Z (Eject) button page 15, 17
H AUX input jack page 42
To connect a portable audio device.
2
I (Front panel release) button
page 13
J MODE/ (Back) button page 14, 19,
29, 30, 43
MODE:
To select the radio band (FM/AM)/select an
auxiliary device connected to the AUX input
jack (front) or AUX IN terminal (rear).
(Back):
To return to the previous display/move to the
upper level/exit the system setup menu or
sound menu.
K DSPL (Display)/SCRL (Scroll) button
page 19, 22, 42
Press to change display items.
Press and hold to scroll the display item.
Press to skip an album or folder/move
the cursor.
Press and hold to skip albums or folders
continuously.
(6): u (Play/Pause) page 15, 16, 17,
18, 20
Radio:
Press to receive stored stations.
Press and hold to store stations.
O Receptor for the card remote
commander
*1 Operation differs depending on the disc (page 16,
18).
*2 When a CD/MP3/WMA/AAC/JPEG/DivX/MPEG-4
is played.
*3 This button has a tactile dot.
9
Card remote commander RM-X168
1
2
3
4
9
0
qa
qs
5
6
7
8
• Refer to the pages listed for details.
• Remove the insulation film before use
(page 12).
A OFF button page 15, 17
Press to turn off/stop the source.
Press and hold to shut off completely.
B SOUND button page 30, 31, 32
To open the sound menu.
C VISUAL SETUP button page 21, 24,
25, 26, 27, 28, 29, 31, 32, 34
To open the play mode/visual setup menu.
D SYSTEM SETUP button page 19, 24,
32, 33, 38, 42, 43
To open the system setup menu.
10
qd
qf
qg
qh
qj
E (BACK)/O button page 21, 22, 26,
27, 29, 30, 33, 34
To return to the previous display/move to the
upper level/exit the system setup menu or
sound menu/return to the menu on a VCD*
F Number buttons page 15, 16, 19, 21,
22, 26, 27, 28, 29
Disc:
To locate a title/chapter/track.
Radio:
Press to receive stored stations.
Press and hold to store stations.
G CLEAR button page 26, 29
To delete an entered number.
H DSPL (Display) button page 19, 22, 42
To change display items.
1
.
I ATT (Attenuate) button
To attenuate the sound (to cancel, press
again).
J u (Play/Pause) button page 15, 16,
17, 18, 20
K .m/M> buttons page 14, 16,
18, 20
2
Disc*
:
Press to skip a chapter/track/scene/file.
Press and hold momentarily to reverse/fastforward disc.
Press and hold to reverse/fast-forward track.
Radio:
Press to tune in stations automatically.
Press and hold to find a station manually.
L DVD playback setting buttons
(AUDIO): page 16, 23
To change the audio language/format.
(For VCD/CD/MP3/WMA/AAC/MPEG-4,
to change the audio channel.)
(SUBTITLE): page 16
To change the subtitle language.
(ANGLE): page 16
To change the viewing angle.
(TOP MENU): page 16
To open the top menu on a DVD.
(MENU): page 16
To open the menu on a disc.
*1 When playing with PBC function.
*2 Operation differs depending on the disc (page 16,
18).
*3 When a CD/MP3/WMA/AAC/JPEG/DivX/MPEG-4
is played.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE/OFF) on the main unit is pressed, or
a disc is inserted to activate the unit first.
M (BROWSE) button page 29
To enter the Quick-BrowZer mode.*
3
N </M/m/, (Cursor)/ENTER buttons
To move the cursor and apply a setting.
O SRC (Source) button page 14, 19, 43
To turn on; change the source (Radio/Disc/
AUX).
P MODE button page 14, 19, 43
To select the radio band (FM/AM)/select an
auxiliary device connected to the AUX input
jack (front) or AUX IN terminal (rear).
Q VOL (Volume) +/– buttons
11
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 13) and press the
RESET button (page 9) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Performing initial setup
1 Press the control dial in the initial
setup display.
2 Rotate the control dial to set the audio
output, then press it.
If a subwoofer is connected, select “SUB
OUT.”
If a power amplifier is connected, select
“REAR OUT.”
If neither subwoofer or power amplifier is
connected, you can select either “SUB OUT”
or “REAR OUT.”
SOURCE / OFF
Control dial
After resetting, the display for initial speaker
setup appears.
Be sure to set correctly following the procedure
below to enjoy the various sound functions of
this unit.
To skip the initial setup, press (SOURCE/OFF),
or insert a disc.
3 Rotate the control dial to select your
listening position, then press it.
Select “FRONT L” if your listening position
is front left, or select “FRONT R” if front
right.
The clock display appears when the setting is
complete.
Note
During the initial setup procedure, returning to the
previous display is not possible by pressing
restart the initial setup, reset the unit by pressing the
RESET button.
With the card remote commander
Press M/m instead of rotating the control dial, press
(ENTER) instead of pressing the control dial.
. To
Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 45.
12
Detaching the front panel
You can detach the front panel of this unit to
prevent theft.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1 Press and hold (SOURCE/OFF).
The unit is turned off.
2 Press , then pull it off towards you.
(SOURCE/OFF)
Notes
• Do not drop or put excessive pressure on the front
panel and display window.
• Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in a parked
car or on a dashboard/rear tray.
Attaching the front panel
Engage part A of the front panel with part B of
the unit, as illustrated, and push the left side into
position until it clicks.
A
B
Note
Do not put anything on the inner surface of the front
panel.
13
Basic Operations
Listening to the radio
SOURCE / OFF
SEEKMODE
1
Press (SOURCE/OFF) repeatedly until “TUNER” appears.
2
Press (MODE) repeatedly until the desired band (FM1, FM2, FM3,
.m/M>
SRC
MODE
AM1 or AM2) appears.
3
Perform tuning.
To tune automatically
Press (SEEK) +
Scanning stops when the unit receives a station. Repeat this procedure until the desired station
is received.
To tune manually
Press and hold (SEEK) +
repeatedly to fine adjust to the desired frequency.
Tip
For details on other radio functions, see “Advanced Operations — Radio” on page 19.
With the card remote commander
Use (SRC) instead of (SOURCE/OFF), and .m/M> instead of (SEEK) –/+.
/–.
/– to locate the approximate frequency, then press (SEEK) +/–
14
Playing video discs
Depending on the disc, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
/
SOURCE
1
OFFZ
b/B/V/vu
Turn on your monitor, then select the input source on your monitor
OFF
Number
buttons
corresponding to this unit.
2
Insert the disc (label side up).
Playback starts automatically.
If playback does not start automatically, press u.
3
If the DVD menu appears, press (1)(b)/(2)(B)/(3)(V)/(4)(v) to move
the cursor, then press (6) (u) to confirm.
With the card remote commander, press the </M/m/,/number buttons to move the cursor,
then press (ENTER) to confirm.
To stop playback
Press (SOURCE/OFF) for 1 second.
With the card remote commander, press (OFF).
u
</M/m/,
ENTER
To eject the disc
Press Z.
Note
Discs in DTS format are not supported. The sound is not output if the DTS format is selected.
About the DVD menu
A DVD is divided into several sections, which make up a picture or music feature. These sections are
called “titles.” When you play a DVD that contains several titles, you can select a desired title using the
DVD’s top menu. For DVDs that allow you to select items such as subtitle/sound language(s), select
these items using the DVD menu.
continue to next page t
15
Other playback operations
ALBUM
b/B/V/v
u
AUDIO
TOP MENU
Number
buttons
u.m/M>
.m/M>
SUBTITLE
ANGLE
MENU
</M/m/,
ENTER
ToPress
pause/resume play after pauseu
skip a chapter/track/scene/file.m/M>
reverse/fast-forward discand hold .m/M> momentarily; and then
repeatedly to switch the speed (× 2 t × 12 t × 120 t× 2…)
cancel reverse/fast-forwardu
show the DVD menu*
1
Remote:
(TOP MENU) or (MENU)
select items in the DVD menu*
1
Main unit:
(1)(b)/(2)(B)/(3)(V)/(4)(v) to move the cursor, then
press (6) (u) to confirm
Remote:
</M/m/,/number buttons to move the cursor, then press
(ENTER) to confirm
change audio language/format/channel
(page 23)*
1
turn off/change the subtitle language*
change the viewing angle*
1
Remote:
(AUDIO) repeatedly until the desired item appears
1
Remote:
(SUBTITLE) repeatedly until the desired item appears*
Remote:
2
(ANGLE) repeatedly until the desired angle number appears
skip an album (folder)*
3
Main unit:
(3) (ALBUM –)/(4) (ALBUM +)
skip albums (folders) continuously*
3
Main unit:
and hold (3) (ALBUM –)/(4) (ALBUM +)
*1 Unavailable depending on the disc.
*2 When the 4-digit input prompt appears, input the language code (page 51) for the desired language.
*3 When a DivX/MPEG-4 is played.
Note on DivX/MPEG-4 playback
If a disc contains multiple file types, only the selected file type (audio/video/image) can be played.
To play DivX/MPEG-4 video files of such a disc, press during playback, select “LIST UP VIDEO FILES,” then
select the desired file (page 29).
16
Playing audio discs
Depending on the disc, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
/
SOURCE
1
Insert the disc (label side up).
Playback starts automatically.
If playback does not start automatically, press u.
OFFZ
u
OFF
To stop playback
Press (SOURCE/OFF) for 1 second.
With the card remote commander, press (OFF).
To eject the disc
Press Z.
Note
Discs in DTS format are not supported. The sound is not output if the DTS format is selected.
continue to next page t
u
17
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.