Sony KV-DR29, KV-DR34M69, KV-DR34, KV-DR29M69 User Manual
4-088-512-11 (2)
Trinitron Color TV
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
使用說明書
• 使用本電視機之前請先詳細閱讀此手冊﹐並妥善保存以備日後用作參考。
Panduan Pengendalian
• Sebelum mengendalikan unit, sila baca buku panduan ini dengan teliti
dan simpan untuk rujukan masa depan.
KV-DR34
GB
CT
MY
KV-DR29
© 2002 Sony Corporation
M69
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110 – 240 V AC.
• Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.
For children’s safety, do not leave children
alone with the TV. Do not allow children to
climb onto it.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals to
clean the TV. Do not attach anything (e.g., adhesive
tape, cellophane tape, glue) on the painted cabinet of
the TV. Do not scratch the picture tube.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV. Refer servicing and disposal of the
TV to qualified personnel.
2
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.
Do not place any objects on the TV.
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
3
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
20 mm
3.8 mm
screws clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
or
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
or
(1) Attach each end of a cord or chain to
the provided holders at the rear of
your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment
which can support the TV set weight.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
4
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“INITIAL SETUP”) ............................. 7
Overview of Controls
TV front and rear panels ..................... 8
Remote control ..................................... 9
Advanced Operations
Selecting the picture and sound
modes .................................................. 11
Viewing higher quality pictures
with DRC-MF ..................................... 12
Viewing the picture in wide mode .. 12
Watching Picture-in-Picture (PIP) ... 13
Selecting a TV program using PIP .. 14
Listening with surround sound ....... 14
Setting the timers ............................... 15
Enjoying stereo or bilingual
programs ............................................. 16
Viewing Teletext ................................. 17
Menu Adjustment
Introducing the menu system .......... 18
Changing the “PICTURE” setting ... 21
Changing the “SOUND” setting ..... 23
Changing the Picture-in-Picture
(“PIP”) setting .................................... 25
Changing the “SETUP” setting ........ 26
Changing the Channel Preset
(“CH PRESET”) setting ..................... 28
Additional Information
Connecting optional components ... 31
Troubleshooting ................................. 33
Specifications ...................... Back cover
GB
5
Installation
x Getting Started
1
Step 1
b
b
INITIAL SET
:
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components
(see page 31).
Step 3
Plug in the power cord, then press ! on the TV to
turn it on.
Step 4
UP
ENG ILSHLAN UGAGE
Set up the TV by following the instructions of the
“INITIAL SETUP”menu (see page 7).
6 Installation
x
MENU
PIC
MODE
DRC-MF
SOUND
PIP PROGR
PIP PROGR
ENTER
Setting up your TV
(“INITIAL SETUP”)
When you turn on your TV for the first time,
the “INITIAL SETUP” menu will appear.
This menu allows you to change the menu
language, adjust the picture position and
preset the TV channels automatically.
Press V or v to select the desired menu
1
language (e.g.,”ENGLISH”), then press
ENTER.
The selected menu language appears.
If the “PIC ROTATION” bar is
2
slanted, press V or v to adjust it,
then press ENTER.
If no adjustment is necessary,
then press ENTER.
or icon on the screen
The
flashes while adjusting.
V/v/ENTER
Rotate anti-
clockwise
MENU
INITIAL SET
INITIAL SET
PIC ROTATION
Refer to this bar when
adjusting.
UP
:
UP
ENG ILSHLAN UGAGE
Rotate
clockwise
Installation
Press V or v to select “YES”, then press
3
ENTER to preset the channels
automatically (see page 28).
INITIAL SET
AUTO PROGRAM
START
NOW?
The screen will indicate automatic presetting
is in progress.
To skip automatic channel presetting, select
“NO”, then press ENTER.
Press V or v to select “NO”, then press
4
ENTER. The “INITIAL SETUP” menu will
not appear again the next time you turn
on the TV by pressing !.
INITIAL SET
PR : 09
YS
TV AUTOS
LOWV
HF
INITIAL SET
DIS PAL
NEX T TIME?
To allow this menu to appear again, select
“YES”, then press ENTER.
Tip
• You can immediately go to the end of the ”INITIAL SETUP” menu by pressing MENU.
• You can also set up your TV using the menu system (see page 18).
Y
NO
:
S
Y T ENUM
HI
Y
NO
Installation
UP
ES
UP
UP
ES
7
Overview of Controls
x TV front and rear panels
TV rear panel
RLY
123
4
ENTER SELECT
AUTO
PROGR
PROGRMENU
L(MONO) R
qa
P
B/CB PR/CR
qs
qf
qd
TV front panel
0
9
L(MONO) R
4
8
7
AUTO
PROGR
56
ENTER SELECT
4
PROGRMENU
3
2
1
Button/Terminal Function Page
1 ! Turn off or turn on the TV. –
2 1 Standby indicator. –
2 Wake Up indicator. 15
2 Stereo/bilingual indicator. 16
3 Remote control sensor. –
4 PROGR +/– Select program number. –
5 2 +/– Adjust volume. –
6 t Select TV or video input. –
7 AUTO PROGR Preset channels automatically. –
Menu operations
5 SELECT V/v Select and adjust items 20
6 ENTER Confirm selected items 20
8 MENU Display or cancel the menu 20
9 t4 Video input terminal 4. 31
0 i Headphone jack. –
qa Component video input terminal. 32
qs 8 Antenna input terminal. 31
qd T Monitor output terminal. 31
qf t1, t2, t3 Video input terminal 1, 2, 3. 31
8 Overview of Controls
x Remote control
qf
qg
qh
qj
qk
ql
w;
wa
ws
wd
wf
DRC-MF
MODE
RESET
Button Function Page
1
1 ?/1 Turn off temporarily or –
3 a Display the TV input. –
MENU
WIDE
MODE
2
4 0 – 9, - Input numbers. –
3
5 JUMP Jump to previous program –
9 SURROUND Select surround mode. 14
4
0 WIDE MODE Select wide-mode (16:9). 12
qa PROGR +/– Select program number. –
5
qf
6
qg % Mute the sound. –
7
qh DVD
qj t
8
wa DRC-MF Select DRC-MF mode. 12
ws SOUND MODE Select sound mode. 11
9
wd PIC MODE Select picture mode. 11
0
wf 2 +/– Adjust volume. –
Timer operations
qa
qs Set TV to turn off 15
qd Set TV to turn on 15
DVD
231
564
897
JUMP
0
SOUND
PIP PROGR
ENTER
PIP PROGR
PIC
SOUND
SURROUND
MODE
PROGR
qs
PIP operations (yellow label)
qd
TV
6 Display a sub screen. 13
7 Swap main and sub 13
8 PIP PROGR +/ Display and change 13,14
PIP PROGR – programs in the sub screen.
qk Select a video input in the 13
ql SOUND Swap sound between main 13
w; ENTER Change sub screen to main 14
Stereo/bilingual operations
2 A/B Select stereo/bilingual 16
turn on the TV.
number.
Display on-screen information
Select component video input.
Select TV or video input. 31
automatically.
automatically.
screens.
sub screen.
and sub screen.
screen.
mode.
.–
Overview of Controls
32
continue
Overview of Controls
9
continued
es
ed
ef
eg
eh
ej
DRC-MF
MODE
RESET
Button Function Page
Menu operations
DVD
wg
wj MENU Display or cancel the menu. 20
wk ENTER Confirm selected items. 20
231
564
wh
897
JUMP
0
SOUND
MENU
PIP PROGR
ENTER
PIP PROGR
PIC
SOUND
SURROUND
MODE
PROGR
WIDE
MODE
wj
wk
eh V, v , B, b Select and adjust items. 20
Teletext operations (green label)
wg Enlarge the Teletext display. 17
wh 0 – 9 Input Teletext page number 17
wl PROGR +/– Display the next or previous 17
page.
e; Show TV screen while 17
waiting for Teletext page.
ea Display Teletext service 17
contents.
es
Reveal concealed information.
ed Display Teletext broadcast. 17
17
ef Stop Teletext display from 17
wl
scrolling.
eg (red, green, Access a FASTEXT menu. 17
yellow, blue)
ej RESET Set TV to factory setting. 33
e;
ea
TV
10 Overview of Controls
Advanced Operations
x Selecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “PERSONAL” option.
Selecting the picture mode
Press PIC MODE to select the desired picture
mode.
Select To
“DYNAMIC” view high contrast pictures.
“STANDARD” view normal pictures.
“HI-FINE” view higher density pictures
MENU
“PERSONAL” receive the last adjusted picture
WIDE
MODE
with mild contrast.
setting from the “ADJUST”
option in the “PICTURE” menu
(see page 22).
PIC MODE
DRC-MF
DVD
231
564
897
JUMP
0
SOUND
PIP PROGR
ENTER
PIP PROGR
PIC
SOUND
SURROUND
MODE
MODE
PROGR
SOUND
MODE
RESET
TV
Selecting the sound mode
Press SOUND MODE to select the desired sound
mode.
Select To
“ DYNAMIC” listen to dynamic and clear
sound that emphasizes both the
low and high tones.
“ DRAMA” listen to sound that emphasizes
voice and high tones.
“ SOFT” listen to soft sound.
“ PERSONAL” receive the last adjusted sound
setting from the “ADJUST”
option in the “SOUND” menu
(see page 24).
Advanced Operations
11
x Viewing higher quality pictures
with DRC-MF
The Digital Reality Creation-Multi Function (DRC-MF) feature allows you to
enjoy higher quality pictures on your TV. You can use the DRC-MF button to
select “DRC1250” or “DRC PROGRESSIVE”.
SOUND
MENU
PIP PROGR
ENTER
DRC-MF
DRC-MF
PIP PROGR
PIC
SOUND
SURROUND
MODE
MODE
PROGR
Note
• The DRC-MF mode is not selectable when the “GAME MODE” or Picture-in-Picture (“PIP”)
mode is turned on.
The DRC-MF logo ( ) and “DRC-MF” are trademarks of Sony
Corporation.
Select To
“DRC1250” view super real (higher density)
WIDE
MODE
“DRC PROGRESSIVE” reduce jitter of any small areas or
pictures.
scanning lines (e.g., letters or the
edge of objects) on the screen.
x Viewing the picture in wide mode
When receiving a wide-mode (16:9) signal, the picture will appear “squeezed”
(compressed) on your screen. Use the WIDE MODE button to view the picture
with the optimal effect.
ENTER
DRC-MF
PIP PROGR
PIC
SOUND
MODE
WIDE
MODE
MODE
12 Advanced Operations
SURROUND
PROGR
WIDE
MODE
Select To
“ON” view the picture in wide-mode
(16:9).
“OFF” cancel wide-mode (16:9).
Loading...