Sony KL-X9200U User Manual 2

Multiscan®X9200 Projection Display
True 50" viewable screen
Native XGA (1024 x 768) resolution, accepts SXGA
Compact and lightweight design is ideal for installation and
transportable applications
Multiple inputs front and rear for maximum versatility and Plug and
capability
All-in-one optical unit requires no calibration or special set up
Built-in 25W sound system with sub-woofer for multimedia presentations
Unique format rear projection technologies create an endless array of presentation and information display opportunities in a compact and truly Plug and Present
device.
LCD Rear Projection Display
KL-X9200U
KL-X9200U
S
pecifications
The Sony Multiscan X9200 display turns virtually any indoor environment into a pre­sentation theater. Ideally suited to a multitude of applications such as conference rooms, lobbies, education and public information systems. At a scant 106 lbs and just 24” deep, the KL-X9200U design makes it a versatile presentation alternative for room-to-room applications. With a brilliant 50” image and 25W built-in sound system to add the impact of multimedia to any presentation.
The KL-X9200U features Plug and Present
technology eliminating the need for any calibration and simplifying system setup and installation. It is also compatible with a variety of input signals commonly found in corporate environments (NTSC, PAL, SECAM, PC, Mac®). Abuilt-in scan converter displays up to SXGA (1280 X 1024) resolutions. An improved, longer lasting light engine (average 6000 hours)* contributes to its low cost of ownership.
*Light engine life may vary based on individual usage.
Sony Electronics Inc. Information Technologies Marketing Division 3300 Zanker Road, San Jose, California 95134 For more information: 1.800.352.SONY Web address: http://www.sony.com/KLdisplays
Computer Interface: The computer industry lacks standards, and therefore, there are a multitude of varying software packages and add-on hardware options. This display is not manufactured to any specific soft­ware, and Sony does not and cannot make any warranty or representation with respect to the performance of this product with any particular software packages and/or non-Sony add-on hardware option except those mentioned in this document. Sony hereby disclaims any representations or warranty that this product is compatible with any combination of non-Sony products you may choose to connect. While Sony representatives or Sony authorized dealers may be able to assist you and may make recommendations, they are NOT authorized to vary or waive this disclaimer. Purchasers must determine for themselves the suitability and compatibility of the hardware and software in each and every particular instance.
©1999 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, Multiscan, and Plug and Present are trademarks of Sony. Windows is registeredtrademark of Microsoft. Macintosh and Mac are trademarks of Apple Computer Inc. Features and specifications are subject to change without notice. Non-metric weights and measurements are approximate. M203 Printed in U.S.A. 3/1999
Signal Input/Outputs (continued)
Audio (RGB 1 In) (phono jacks)
2 channels, 500 mVrms Impedance: more than 47 kohms
Audio (RGB 2 In) (stereo minijack)
500 mVrms Impedance: more than 47 kohms
RGB Out (D-sub 15-pin, female)
Video
R,G,B: 0,7 Vp-p, positive, 75 ohms
SYNC
Sync on Green: 0.286 Vp-p HD: Composite sync: TTL, high impedance,
sync positive/negative Horizontal sync: TTL, high impedance, sync
positive/negative VD: Vertical sync: TTL, high impedance,
sync positive/negative
Audio (phono jacks)
2 channels, 500 mVrms Impedance: less than 1 kohm
Digital Image Controls
Audio (treble, bass, balance, effect) Auto shut off Brightness Color Color temperature Contrast Dot phase, pitch, timing H-White H / V size and centering Hue Language Sharpness
Power Requirements
100-120V, 220-240V AC; 50/60Hz
Power Management
Operation: 220 watts (maximum) Standby: 4 watts
Dimensions (WxHxD)
44 3/8" x 42 7/8" x 24 1/8"
Weight
106 lbs., 8 oz.
Operating Temperature
32°F-104°F
Regulation Compliance
Safety: UL 1950
CSA C22.2 No. 950
Emission/EMI: FCC class B
IC Class B
Plug and Play: DDC-1, DDC-2B
Supplied Accessories
AA (R6) batteries (2) AC power cord (1) Brackets and screws (2) Buckle (1) HD15-HD15 (male, without the No. 9 pin)
adapter (1) Hexagon head wrench (1) Macintosh
®
adapter (1)
Macintosh
®
utility disk (1) Remote control RM-902 (1) RGB signal cable (D-sub 15-pin to D-sub 15-pin) (1) Windows
®
95 monitor information disk (1)
Optional Accessories
XL-100U Replacement lamp unit
Limited Warranty
One year parts and labor (90 days for lamp)
Screen Size:
50" display (diagonal)
Viewable Image Size (for RGB input)
50" (diagonal)
Projection System
3 LCD panels, 1 lens projection system
LCD
Three 1.3” Poly-Si TFT LCD panel Approx. 2.36 millions pixels (786,432 x 3 panels)
Native Resolution
750 TV lines (video) 1024 x 768 (RGB)
Maximum Resolution
1280 x 1024
Projector Lens
Large diameter hybrid lens F2.4
Lamp
100W High Intensity Discharge (UHP)
Luminance (Peak)
350 nits (cd/m
2
)
Color Reproduction
16.7 million
Color System
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M
Horizontal Scan Range
15.75, 24.8 - 85kHz
Vertical Scan Range
50 - 85Hz
Speaker Performance
Left/Right: 5 watts x 2 Woofer: 15 watts
Signal Input/Outputs
Video 1, 2, and 3 In
S Video (4-pin mini-DIN)
Y: 1 Vp-p, 75 ohms unbalanced, sync negative C: 0.286 Vp-p, NTSC burst signal, 75 ohms
0.3 Vp-p, PALburst signal, 75 ohms
Video (phono jacks)
1 Vp-p, 75 ohms unbalanced, sync negative
Audio (phono jacks)
2 channels, 500 mVrms Impedance: more than 47 kohms
Component In
Video (phono jacks)
Y: 1 Vp-p, 75 ohms, sync negative PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.7 Vp-p, 75 ohms
Audio (phono jacks)
500 mVrms (100% modulation) Impedance: 47 kohms
Video Out
S Video (4-pin mini-DIN)
Y: 1 Vp-p, 75 ohms, unbalanced, sync negative C: 0.286 Vp-p, NTSC burst signal, 75 ohms
0.3 Vp-p, PALburst signal, 75 ohms
Video (phono jack)
1 Vp-p, 75 ohms unbalanced, sync negative
Audio (phono jacks)
2 channels, 500 mVrms
Impedance: less than 5 kohms
RGB 1, 2 In
Video (D-sub 15-pin, female)
R,G,B: 0.7 Vp-p, positive, 75 ohms
SYNC
Sync on Green: 0.286 Vp-p HD: Composite sync: TTL, high impedance,
sync positive/negative Horizontal sync: TTL, high impedance,
sync positive/negative VD: Vertical sync: TTL, high impedance,
sync positive/negative
LCD Rear Projection Display KL-X9200U
KL-X9200U Front Input/Controls
KL-X9200U Rear Input
Loading...