Sony KLV-52Z450A, KLV-46Z450A, KLV-40Z450A Operating Instructions Manual
LCD Colour TV
Operating Instructions
KLV-52Z450A
KLV-46Z450A
KLV-40Z450A
© 2008 Sony Corporation 4-127-165-11(1)
Introduction Trademark information
Thank you for choosing this Sony product.
Before operating the TV, please read this manual
thoroughly and retain it for future reference.
The illustrations used in this manual are of the
KLV-46Z450A unless otherwise stated.
• HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
• “BRAVIA” and are trademarks of Sony
Corporation.
GB
2
Table of Contents
Start-up Guide 4
Checking the accessories ...........................4
Inserting batteries into the remote...............4
1: Attaching the stand .................................4
2: Connecting an antenna/cable/VCR .........5
3: Preventing the TV from toppling over......5
4: Bundling the cables .................................5
5: Performing the initial set-up ....................6
Selecting the language............................. 6
Auto-tuning the TV .................................... 6
Watching TV .............................................. 7
Adjusting the viewing angle of the TV .........7
Adjust the angle left and right (swivel) ..... 7
Detaching the Table-Top Stand from
the TV..........................................................7
Safety information .......................................8
Precautions .................................................9
Overview of the remote ..........................10
Using the Tools menu ............................. 13
Overview of the TV buttons and
indicators .................................................14
15
Using Optional Equipment
22
Using MENU Functions
Navigating through menus........................ 22
Using the Favourite List ............................ 23
Settings adjustment .................................. 24
Picture menu ...........................................26
Sound menu ............................................ 27
Screen menu ........................................... 28
Video Settings menu ...............................29
Set-up menu............................................ 30
PC Settings menu.................................... 33
Channel Set-up menu .............................34
36
Additional Information
Installing the Accessories (Wall-Mount
Bracket, TV Stand) ................................... 36
TV installation dimensions table..............37
Screw and Hook locations diagram/
table ........................................................38
Specifications ........................................... 39
Troubleshooting ........................................ 40
Connecting optional equipment.................15
Viewing pictures from the connected
equipment .................................................16
Viewing Twin Picture .................................18
Viewing PIP (Picture in Picture) ................18
Using BRAVIA Sync (Control for HDMI) ...19
To connect the equipment that is
compatible with control for HDMI ........... 19
To make the control for HDMI settings ... 19
Control for HDMI ..................................... 19
Operating Optional Equipment using the TV
Remote......................................................20
Buttons for using optional equipment..... 20
Programming the remote ........................ 20
GB
3
Start-up Guide
Checking the accessories
AC power cord
Stand (1) and screws (4) (For KLV-46Z450A/
KLV-40Z450A)
Remote RM-GA012 (1)
Size AA batteries (R6 type) (2)
Inserting batteries into the remote
Push and lift the cover to open.
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
1: Attaching the stand
B For KLV-46Z450A/KLV-40Z450A
1 Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2 Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
• This TV is very heavy, so two or more people
should place the TV onto the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5N·m (15kgf·cm).
GB
4
2: Connecting an
3: Preventing the TV
Start-up Guide
antenna/cable/VCR
Connecting an antenna/cable
Antenna cable
(not supplied)
8
Connecting an antenna/cable and VCR
8
Antenna cable
(not supplied)
S video
cable
(not
supplied)
from toppling over
8
8
1 Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2 Install a machine screw (M6 x 12, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine screw
with a strong cord.
4: Bundling the cables
Audio/Video
cable (not
supplied)
VCR
Antenna cable
(not supplied)
2
1
• Do not bundle the AC power cord together with
other cables.
3 4
GB
5
5: Performing the initial set-up
,
1
3
Press F/f to select the language displayed
on the menu screens, then press .
English
4 Press F/f to select the country/region,
then press .
5 Press F/f to select “Home”, then press .
3, 4, 5, 6, 9,
10, 11
8
Selecting the language
1 Connect the TV to your AC power outlet
(110-240 V AC, 50/60 Hz).
2 Press 1 on the top edge of the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the TV front panel is red), press TV
"/1 on the remote to turn on the TV.
When you turn on the TV for the first time, the
“Language” menu appears on the screen.
Select location.
Auto-tuning the TV
6 Press G/g to select “OK”, then press .
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No programmes found. Please connect antenna
(aerial) and select “Confirm” to start auto-tuning
again. If 100 channels are found, auto-tuning is
stopped.
GB
6
7 When the “Programme Sorting” menu
appears on the screen, follow the steps of
“Programme Sorting” (page 34).
If you do not want to change the order in which the
channels are stored on the TV, go to step 8.
8 Press MENU to exit.
The TV has now tuned in all the available
channels.
9 Select day and time.
10 Select “Yes” to link the operations of the
TV and the connected equipment that is
compatible with control for HDMI
automatically.
Adjusting the viewing angle of the TV
This TV can be adjusted within the angles shown
below.
Adjust the angle left and right (swivel)
Top view
Front
Detaching the TableTop Stand from the TV
Start-up Guide
Do you want to enable control for compatible
HDMI devices?
11 Press G/g to select the desired setting in
“Display this menu next time?” dialogue,
then press
z •If “Yes” is selected and the TV is turned off
by pressing 1 on the TV, or is disconnected
from the AC power outlet, the initial set-up
procedure restarts the next time the TV is
turned on.
to exit.
Watching TV
1 Press 1 on the top edge of the TV to turn
on the TV.
2 Press the number buttons or PROG +/– to
select a TV channel.
3 Press 2 +/– to adjust the volume.
Remove the screws guided by the arrow marks of
the TV.
Do not remove the Table-Top Stand for any reason
other than to wall-mount the TV.
• For bracket installation, refer to the instruction
guide provided by the Wall-Mount Bracket model
for your TV. Sufficient expertise is required in
installing this TV, especially to determine the
strength of the wall for withstanding the TV’s
weight. For product protection and safety
reasons, Sony strongly recommends that you
use the Wall-Mount Bracket model designed
for your TV and the wall-mounting of your TV
should be performed by Sony dealers or
licensed contractors.
GB
7
Safety information
Installation/Set-up
Install and use the TV set in accordance with the
instructions below in order to avoid any risk of fire,
electrical shock or damage and/or injuries.
Installation
• The TV set should be installed near an easily accessible
AC power outlet.
• Place the TV set on a stable, level surface to avoid it from
falling down and cause personal injury or damage to the
TV.
• Only qualified service personnel should carry out wall
installations.
• For safety reasons, it is strongly recommended that you
use Sony accessories, including:
– Wall-mount bracket SU-WL500
– Wall-mount bracket SU-WL50B
• Be sure to use the screws supplied with the Wall-mount
bracket when attaching the mounting hooks to the TV set.
The supplied screws are designed so that they are 8 mm to
12 mm in length when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws differ depending on
the Wall-mount bracket model.
Use of screws other than those supplied may result in
internal damage to the TV set or cause it to fall, etc.
8mm - 12mm
Installed on the wall
30 cm
10 cm 10 cm
10 cm
Leave at least this space around the set.
Installed with stand
30 cm
10 cm 10 cm 6 cm
Leave at least this space around the set.
• To ensure proper ventilation and prevent the collection of
dirt or dust:
– Do not lay the TV set flat, install upside down,
backwards, or sideways.
– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains,
or items such as newspapers, etc.
– Do not install the TV set as shown below.
Air circulation
Air circulation is blocked.
is blocked.
Screw (supplied with the Wall-mount
bracket)
Mounting Hook
Hook attachment on rear of TV set
Transporting
• Before transporting the TV set,
disconnect all cables.
• Two or more people are needed to
transport a large TV set.
• When transporting the TV set by
hand, hold it as shown on the right.
Do not put stress on the LCD panel.
• When lifting or moving the TV set,
hold it firmly from the bottom.
• When transporting the TV set, do
not subject it to jolts or excessive
vibration.
• When transporting the TV set for
repairs or when moving, pack it
using the original carton and
packing material.
Ventilation
• Never cover the ventilation holes or
insert anything in the cabinet.
• Leave space around the TV set as
shown below.
• It is strongly recommended that you
use a Sony wall-mount bracket in
order to provide adequate aircirculation.
Be sure to hold
the bottom of the
panel, and not the
transparent part,
speaker, or
speaker grille
area. Do not
compress the
panel’s speaker
grille area.
Wall
Wall
AC power cord
Handle the AC power cord and outlet as follows in
order to avoid any risk of fire, electrical shock or
damage and/or injuries:
– Use only Sony supplied AC power cords, not those of
other brands.
– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 110-240 V AC supply only.
– When wiring cables, be sure to unplug the AC power
cord for your safety and take care not to catch your feet
on the cables.
– Disconnect the AC power cord from the AC power
outlet before working on or moving the TV set.
– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the
plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Notes
• Do not use the supplied AC power cord on any other
equipment.
• Do not pinch, bend, or twist the AC power cord
excessively. The core conductors may be exposed or
broken.
GB
8
• Do not modify the AC power cord.
• Do not put anything heavy on the AC power cord.
• Do not pull on the AC power cord itself when
disconnecting the AC power cord.
• Do not connect too many appliances to the same AC
power outlet.
• Do not use a poor fitting AC power outlet.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those listed below,
or the TV set may malfunction and cause a fire,
electrical shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the seashore, on a ship or
other vessel, inside a vehicle, in medical institutions,
unstable locations, near water, rain, moisture or smoke.
Environment:
Places that are hot, humid, or excessively dusty; where
insects may enter; where it might be exposed to mechanical
vibration, near flammable objects (candles, etc). The TV set
shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the TV.
Situation:
Do not use when your hands are wet, with the cabinet
removed, or with attachments not recommended by the
manufacturer. Disconnect the TV set from AC power outlet
and antenna during lightning storms.
Broken pieces:
• Do not throw anything at the TV set. The screen glass may
break by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you
have unplugged the AC power cord. Otherwise electric
shock may result.
When not in use
• If you will not be using the TV set for several days, the TV
set should be disconnected from the AC power for
environmental and safety reasons.
• As the TV set is not disconnected from the AC power
when the TV set is just turned off, pull the plug from the
AC power outlet to disconnect the TV set completely.
• However, some TV sets may have features that require the
TV set to be left in standby to work correctly.
For children
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that
they are not mistakenly swallowed.
If the following problems occur...
Turn off the TV set and unplug the AC power cord
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it
checked by qualified service personnel.
Precautions
Viewing the TV
• View the TV in moderate light, as viewing the TV in poor
light or during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
• Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective,
black dots may appear or bright points of light (red, blue,
or green) may appear constantly on the LCD screen. This
is a structural property of the LCD screen and is not a
malfunction.
• Do not push or scratch the front filter, or place objects on
top of this TV set. The image may be uneven or the LCD
screen may be damaged.
• If this TV set is used in a cold place, a smear may occur in
the picture or the picture may become dark. This does not
indicate a failure. These phenomena disappear as the
temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in
use. This is not a malfunction.
• The LCD screen contains a small amount of liquid crystal.
Mercury is sometimes contained depending on the kind of
fluorescent tubes. Follow your local ordinances and
regulations for disposal.
Handling and cleaning the screen surface/cabinet of
the TV set
Be sure to unplug the AC power cord connected to the TV set
from AC power outlet before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently
with a soft cloth. If dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild detergent solution.
• Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using such materials or
maintaining prolonged contact with rubber or vinyl
materials may result in damage to the screen surface and
cabinet material.
• Periodic vacuuming of the ventilation openings is
recommended to ensure to proper ventilation.
• When adjusting the angle of the TV set, move it slowly so
as to prevent the TV set from moving or slipping off from
its table stand.
Optional Equipment
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
When:
– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit or having
something thrown at it.
– Any liquid or solid object falls through openings in the
cabinet.
GB
9
Overview of the remote
1 TV "/1 – TV standby
Press to turn the TV on or to switch to standby mode.
2 – Wide Mode
Changes the picture size. Press repeatedly to select the desired wide mode.
For TV, Video, HD/DVD, HDMI or DIGITAL MEDIA PORT (except PC
input)
Wide Zoom* Enlarges the centre portion of the picture. The left and
Normal Displays the 4:3 picture in its original size. Side bars are
Full Stretches the 4:3 picture horizontally, to fill the 16:9
Zoom* Displays cinemascopic (letter box format) broadcasts in
* Parts of the top and bottom of the picture may be cut off.
• You cannot select “Normal” for HD signal source pictures.
For PC Input
Full 1 Stretches the original picture to fill the screen vertically.
right edges of the picture are stretched to fill the 16:9
screen.
shown to fill the 16:9 screen.
screen.
the correct proportions.
z • The number 5, N, PROG + and
AUDIO buttons have tactile dots.
Use the tactile dots as references
when operating the TV.
GB
10
Full 2 Stretches the Full 1 picture horizontally to fill the 16:9
screen.
3 AUDIO – Dual Sound (page 28)
4 – Picture freeze
Freezes the TV picture. Press once to display a frozen image with the current
programme in a window. Press again to fill the screen with the frozen image.
Press third time to return to the current programme.
Current programme
(Location of the sub
window can be moved
by pressing
F/f/G/g.)
• This function is not available for Twin Picture and PC input source.
Frozen picture
5
6
7
8
9
q;
qa
qs
qd
qf
5 / – Info/Text reveal
• Displays information. Press once to display current channel number and
screen mode. Press again to display clock information. Press third time to
remove the display from the screen.
• In Text mode: Reveals hidden information (e.g. answers to a quiz).
6 / – Input select/Text hold
• Displays the connected equipment list and selects the input source
(page 16).
• In Text mode: Holds the current page.
7 F/f/G/g/ – Item select/OK
• Selects or adjusts items.
• Confirms selected items.
8 TOOLS (page 13)
9 MENU
Displays or cancels the menu.
0 Coloured buttons
In Text mode: Accesses the corresponding coloured Fastext menu quickly
and easily. The Fastext feature can be used only when the Fastext broadcast
is available.
qa Number buttons
• Selects channels. For channel numbers 10 and above, enter the second
digit quickly (page 34).
• In Text mode: Enters the three digit page number to select the page.
qs – Favourite list
Displays the Favourite list that you have specified (page 23).
qd PROG +/–/ /
• Selects the next (+) or previous (–) channel.
• In Text mode: Selects the next ( ) or previous ( ) page.
qf – Previous channel
Returns to the previous channel watched (for more than five seconds).
Continued
11
GB
qg
qh
qj
qk
ql
w;
wa
ws
wd
wf
wg
qh
qg – Light
Press to illuminate the buttons on the remote so that you can see them easily
even if the room is dark.
qh Buttons for using optional equipment
You can operate the equipment connected to the TV (page 20).
qj SYNC MENU
Displays the menu of connected HDMI CEC (Consumer Electronics
Control) equipment which is supported. While viewing other input screens
or TV programmes, “HDMI Device Selection” is displayed when the button
is pressed.
qk THEATRE
You can set Theatre Mode on or off. When Theatre Mode is set to on, the
optimum audio output (if the TV is connected with an audio system using an
HDMI cable) and picture quality for film videos are automatically set.
• Control for HDMI (BRAVIA Sync) is only available with the
connected Sony equipment that has the BRAVIA Sync logo or is
compatible with control for HDMI.
• If you turn the TV off, Theatre Mode is also turned off.
ql a – TV mode
Exit Text mode, or switches to a TV display when displaying external input.
w; – Twin Picture / PIP (page 18)
Displays two pictures simultaneously.
wa GUIDE /
This button has no function for this TV.
ws RETURN
Returns to the previous screen of any displayed menu.
wd / – Text
In Text mode: Displays Text broadcast.
Each time you press
Text t Text over the TV picture (mix mode) t No Text (exit the Text
service)
•Text language displays can be either English, Persian or French
~
depending on your broadcast signal.
/, the display changes cyclically as follows:
wf 2 +/– – Volume
Adjusts volume.
wg % – Mute
Press to mute the sound. Press again to restore the sound.
z • In standby mode, if you want to turn on the TV without sound, press
this button.
12
GB
Using the Tools menu
Press TOOLS enables you to access various viewing options and change/make adjustments according to the source
and screen mode. The options displayed vary depending on the input source.
Viewing TV programme Viewing connected equipment
Options Description
Picture Mode See page 26.
Sound Mode See page 27.
Surround See page 27.
Intelligent Picture See page 34.
MPEG Noise
Reduction
Speaker See page 31.
Motionflow See page 29.
Add to Favourites You can add the current
Sleep Timer See page 32.
Power Saving See page 32.
See page 26.
channel to the favourite list.
Options Description
Picture Mode (except PC
input mode)
Display Mode (in PC input
mode only)
Sound Mode See page 27.
Surround See page 27.
MPEG Noise Reduction
(except PC input mode)
Speaker See page 31.
Motionflow See page 29.
Twin Picture (except PC and
DMPORT input mode)
PIP (in PC input mode only) See page 18.
Single Picture (in Twin
Picture and PIP mode only)
Audio Swap (in PIP mode
only)
Auto Adjustment (in PC
input mode only)
Horizontal Shift (in PC
input mode only)
Sleep Timer (except PC
input mode)
Power Saving See page 32.
Device Control
[in HDMI input mode
(except HDMI PC input)
only]
Device Control (Menu)
(in DMPORT input mode
only)
Control Panel
(in DMPORT input mode
only)
See page 26.
See page 26.
See page 26.
See page 18.
See page 18.
See page 18.
See page 33.
See page 33.
See page 32.
Displays the menu screen
to operate the connected
HDMI-compatible
equipment.
If the connected DIGITAL
MEDIA PORTcompatible equipment has
the operation menu,
displays it directly.
Displays the control panel
to operate the connected
DIGITAL MEDIA PORTcompatible equipment.
13
GB
Overview of the TV buttons and indicators
890q
q
1 1 – Power
Turns the TV on or off.
• To disconnect the TV from the AC power
completely, pull the plug from the AC power
outlet.
2
Displays or cancels the menu.
3 – OK
In TV menu: Selects the menu or option, and
confirms the setting.
4 – Input select
Displays the connected equipment list and selects the
input source (page 16).
5 ///
In TV menu: Moves through the options right ( ),
left ( ), up ( ) or down ( ).
6 2 /
Increases (+) or decreases (-) the volume.
213 4 5
5 5
5
76
a
s
7 PROG /
Selects the next (+) or previous (-) channel.
8 / – Picture Off / Timer indicator
• Lights up in green when the picture is turned off
(page 32).
• Lights up in amber when the timer is set (page 32).
9 1 – Standby indicator
Lights up in red when the TV is in standby mode.
0 " – Power indicator
Lights up in green when the TV is turned on.
qa – Remote sensor
Receives IR signals from the remote.
Do not put anything over the sensor, as its function
may be affected.
qs Light sensor (page 32)
Do not put anything over the sensor, as its function
may be affected.
GB
14
Loading...