Sony KLV-32CX320, KLV-32NX520, KLV-32BX320, KLV-40BX420, KLV-26CX320 Operating Instructions Manual

...

0 (0)

4-270-477-15(1)

LCD Colour TV

Operating Instructions

Start-up Guide

Operating the TV

Using Optional Equipment

Using Menu Functions

Additional Information

KLV-40NX520 / 40CX420 / 40BX420 / 32NX520 / 32CX420 / 32CX320 / 32BX320 / 26CX320 KLV-26BX320 / 22CX320 / 22BX320 / 32BX311

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

The illustrations used in this manual are of the KLV-32BX320 unless otherwise stated.

Notice for customers in India

Attach the supplied plug adaptor.

Notice for customers in South Africa

The Euro/South Africa converter plug should be fitted as follows.

1 Insert the power supply or

CEE7 plug in to the converter plug.

2 Use an appropriate

screwdriver to attach the screw tightly without damaging the screw head.

3 TEST: Grip the converter

plug, and pull the VDE cord set/transformer to ensure it is fully secure, if not then increase the torque setting and further tighten. Re-test. The converter plug is now ready for use.

Trademark information

• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

•DivX

• “BRAVIA” and are trademarks of Sony

, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

Corporation.

device must be registered in order

Location of the identification label

Labels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV.

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television.

• Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.

Table of Contents

Start-up Guide

Checking the accessories ..................................6

1: Attaching the stand.........................................6

2: Connecting an antenna/cable/VCR ................7

3: Preventing the TV from toppling over .............7

4: Performing the initial set-up............................8

Watching TV.......................................................8

Adjusting the viewing angle of the TV

(NX520 models only)..........................................9

Detaching the stand from the TV........................9

Safety information ............................................10

Precautions ......................................................11

Operating the TV

Overview of the remote ....................................12

Overview of the TV buttons and indicators....... 14

Using Optional Equipment

Connecting optional equipment ........................ 15

Viewing pictures from the connected

equipment.........................................................16

Viewing Twin Picture ........................................17

Viewing PIP (Picture in Picture)........................17

Using Menu Functions

Navigating through menus ............................... 18

Using the Favourites ........................................18

Playing back photo/music/video via USB......... 19

Listening to the FM Radio ................................ 22

Using BRAVIA Sync with Control for HDMI .....23

Settings adjustment.......................................... 24

Picture .............................................................24

Sound..............................................................25

Screen.............................................................27

Channel Set-up ...............................................29

Parental Lock ..................................................30

Set-up..............................................................31

Eco ..................................................................33

Additional Information

Installing the accessories

(Wall-Mount Bracket) .......................................34

TV installation dimensions table......................35

Screw and hook locations diagram/table .......36

Troubleshooting ...............................................37

Specifications...................................................39

Before operating the TV, please read “Safety information” (page 10). Retain this manual for future reference.

Start-up Guide

Checking the accessories

Stand (1) and screws (7) (for KLV-40/32NX520 (8)) Remote RM-GA020 (1) Size AA batteries (R6 type) (2)

To insert batteries into the remote

Push to open

B KLV-22CX320/KLV-22BX320

1: Attaching the stand

• Refer to the supplied stand leaflet for proper attachment for some TV models.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• If the TV is brought directly from a cold to a warm location, or is placed in a very damp room, or is placed in a room in which heating has just been turned on, moisture may condense on the surface or inside the TV. Should this occur, turn off the TV and leave the TV off until the moisture evaporates, and then the TV can be used. If you notice moisture condensation between the glass panel and the LCD, turn on the TV and the condensation will evaporate after the TV has warmed up.

B KLV-40/32NX520/KLV-40/32CX420/KLV-

40BX420/KLV-32/26CX320/KLV-32/ 26BX320/KLV-32BX311

• Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied

screws.

• This TV is very heavy, so two or more people should

place the TV onto the stand.

• If using an electric screwdriver, set the tightening

torque at approximately 1.5 N·m (15 kgf·cm).

• Ensure the AC power cord is away from screw holes

during stand installation to avoid damage to the AC power cord.

2: Connecting an antenna/

3: Preventing the TV from

cable/VCR

• Connecting cables are not supplied.

Connecting an antenna/cable

Antenna cable

Connecting an antenna/cable and VCR

toppling over

Start-up Guide

1 Install a wood screw (4 mm in diameter, not

supplied) in the TV stand.

2 Install a machine screw (M4 × 16, not

supplied) into the screw hole of the TV.

AV cable

VCR

Antenna cable

3 Tie the wood screw and the machine screw

with a strong cord (not supplied).

z • An optional Sony support belt kit is used to secure the

TV. Contact your nearest Sony service centre to purchase a kit. Have your TV model name ready for reference.

4: Performing the initial set-up

* The shapes of AC power plug and AC power outlet

differ depending on the region.

**When the TV is in standby mode (the 1 (standby)

indicator on the TV front panel is red), press "/1 on the remote to turn on the TV.

Follow the instructions on the screen.

Watching TV

1 Press 1 on the TV to turn on the TV. 2 Press the number buttons or PROG +/– to

select a TV channel.

3 Press 2 +/– to adjust the volume.

“Location”: Select “Home” for the best

TV settings to use the TV in the home.

“Programme Sorting”: If you want to change the order of channels, follow the steps in “Programme Sorting” (page 29). Press HOME to exit.

• You can also tune channels manually (page 29).

• Language options vary depending on model.

Adjusting the viewing angle of the TV (NX520 models only)

This TV can be adjusted within the angles shown below.

6°0°

Detaching the stand from the TV

• Do not remove the stand for any reason other than to wall-mount the TV.

B KLV-40/32NX520/KLV-40/32CX420/KLV-

40BX420/KLV-32/26CX320/KLV-32/ 26BX320/KLV-32BX311

B KLV-22CX320/KLV-22BX320

Start-up Guide

Remove screw as shown.

• To return to 0°, reverse the above procedure.

Install screw into the top screw hole of the Table-Top Stand.

Slide in.Lift up and tilt.

Safety information

Installation/Set-up

Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible AC power outlet.

• Place the TV set on a stable, level surface to avoid it from falling down and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall installations.

• For safety reasons, it is strongly recommended that you use Sony accessories, including: – KLV-40NX520/40CX420/40BX420/

32NX520/32CX420/32CX320/ 32BX320/32BX311: Wall-mount bracket SU-WL50B

– KLV-26CX320/26BX320/22CX320/

22BX320: Wall-mount bracket SU-WL100

• Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.

Min. ~ 26 TV: 6.5 ~ 10mm 32 TV ~ Max.: 8 ~ 12mm

Screw (supplied with the Wall-mount bracket)

Mounting Hook Hook attachment on rear of

TV set

Transporting

• Before transporting the TV set, disconnect all cables.

• Two or more people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as shown below. Do not put stress on the LCD panel.

KLV-40/32NX520/

KLV-26/22CX320/ KLV-26/22BX320

• W hen lifting or moving the TV set, hold it firmly from the bottom.

• When transporting the TV set, do not subject it to jolts or excessive vibration.

• When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.

KLV-40/32CX420/ KLV-40BX420/ KLV-32CX320/ KLV-32BX320/ KLV-32BX311

Ventilation

• Never cover the ventilation holes or insert anything in the cabinet.

• Leave space around the TV set as shown below.

• It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation.

Installed on the wall

30 cm

10 cm 10 cm

Leave at least this space around the set.

10 cm

Installed with stand

30 cm

10 cm

Leave at least this space around the set.

• To ensure proper ventilation and prevent the collection of dirt or dust: – Do not lay the TV set flat, install

upside down, backwards, or sideways.

– Do not p lace the TV set on a shelf, rug,

bed or in a closet.

– Do not cover the TV set with a cloth,

such as curtains, or items such as newspapers, etc.

– Do not install the TV set as shown

below.

10 cm

6 cm

Air circulation is blocked.

Wall

AC power cord

Handle the AC power cord and outlet as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: – The shape of AC power plug, which is

supplied with the TV set, varies depending on the regions. Be sure to connect the appropriate supplied AC power cord with the plug that fits into the AC power outlet.

– Use only Sony supplied AC power cords,

not those of other brands. – Insert the plug fully into the AC power outlet. – Operate the TV set on a 110-240 V AC

supply only. – When wiring cables, be sure to unp lug the

AC power cord for your safety and take

care not to catch your feet on the cables. – Disconnect the AC power cord from the

AC power outlet before working on or

moving the TV set. – Keep the AC power cord away from heat

sources. – Unplug the AC power plug and clean it

regularly. If the plug is covered with dust

and it picks up moisture, its insulation may

deteriorate, which could result in a fire.

Notes

• Do not use the supplied AC power cord on

any other equipment.

• Do not pinch, bend, or twist the AC power

cord excessively. The core conductors

may be exposed or broken.

• Do not modify the AC power cord.

• Do not put anything heavy on the AC

power cord.

• Do not pull on the AC power cord itself

when disconnecting the AC power cord.

• Do not connect too many appliances to

the same AC power outlet.

• Do not use a poor fitting AC power outlet.

Prohibited Usage

Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.

Location:

• Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.

• If the TV is placed in the changing room of a public bath or hot spring, the TV may be damaged by airborne sulfur, etc.

Environment:

• Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.

• Do not place the TV in a humid or dusty space, or in a room with oily smoke or steam (near cooking tables or humidifiers). Fire, electric shock, or warping may result.

Situation:

• Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from AC power outlet and antenna during lightning storms.

• Do not install the TV so that it sticks out into an open space. Injury or damage from a person or object bumping into the TV may result.

Broken pieces:

• Do not throw anything at the TV set. The screen glass may break by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you have unplugged the AC power cord. Otherwise electric shock may result.

• Do not subject the LCD screen to any strong impact or shock. The screen glass may crack or shatter and cause injury.

When not in use

• If you will not be using the TV set for several days, the TV set should be disconnected from the AC power for environmental and safety reasons.

• As the TV set is not disconnected from the AC power when the TV set is just turned off, pull the plug from the AC power outlet to disconnect the TV set completely.

• However, some TV sets may have features that require the TV set to be left in standby to work correctly.

For children

• Do not allow children to climb on the TV set.

• Keep small accessories out of the reach of children, so that they are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the AC

power cord immediately if any of the following problems occur. Ask your dealer or Sony service centre to have it checked by qualified service personnel.

When:

– AC power cord is damaged. – Poor fitting of AC power outlet. – TV set is damaged by being dropped, hit

or having something thrown at it.

– Any liquid or solid object falls through

openings in the cabinet.

About LCD Monitor Temperature

When the LCD Monitor is used for an extended period, the panel surrounds become warm. You may feel hot when touching there by the hand.

Precautions

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black d ots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction.

• Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in use. This is not a malfunction.

• The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury. Follow your local ordinances and regulations for disposal.

Handling and cleaning the screen surface/cabinet of the TV set

Be sure to unplug the AC power cord connected to the TV set from AC power outlet before cleaning. To avoid material degradation or screen coating degradation, observe the following precautions.

• To remove dust from the screen surface/ cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.

• Do not spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts, and may cause a malfunction.

• Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.

• Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.

• When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand.

Optional Equipment

Keep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur.

(Caution about handling the remote control)

Notes

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old and new batteries.

• Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.

• Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

Operating the TV

Overview of the remote

1 / – Input select / Text hold

• Displays the connected equipment list and selects the input source (page 16).

• In Text mode: Holds the current page.

2 SYNC MENU

Press to display the BRAVIA Sync Menu and then select connected HDMI equipment from “HDMI Device Selection”. The following options can be selected from BRAVIA Sync Menu: “Device Control”: Use the “Device Control” menu to operate equipment that is compatible with Control for HDMI. Select options from “Home (Menu)”, “Options” and “Content List” to operate the equipment. “Speakers”: Selects “TV Speakers” or “Audio System” to output the TV’s sound from the TV speakers or connected audio equipment. “TV Control”: Use the “TV Control” menu to operate the TV from the “HOME (Menu)” or “Options” menu. “Return to TV”: Selects this option to return to TV programme.

3 N/X/x/m/M/./>

You can operate the BRAVIA Sync-compatible equipment that is connected to the TV. Some other buttons on the remote control may also operate BRAVIA Sync equipment.

4 a – TV mode

Exit Text mode, or switches to a TV display when displaying external input.

5 – Twin Picture / PIP (page 17) 6 SCENE – Scene Select mode

Press to display the “Scene Select” menu. When you select the desired scene option, the optimum sound and picture quality for selected scene are automatically set. The options you can select may vary. Unavailable options are greyed out. “Auto”: Delivers optimum picture and sound quality which is automatically set according to input source. There may not be any effect depending on the connected equipments.

“General”: Current user settings. “Photo”: Delivers picture that reproduces the texture and colour of a printed

photo. “Music”: Delivers dynamic and clear sound effects like at a concert.

z • The number 5, N,

PROG + and AUDIO

buttons have tactile dots. Use the tactile dots as references when operating the TV.

“Cinema”: Delivers theatre-like picture and dynamic sound. “Game”: Delivers the best picture and sound quality for fullest game playing

enjoyment. “Graphics”: Delivers clearer detailed pictures to reduce fatigue for prolonged viewing. “Sports”: Delivers realistic picture with surround sound like in a stadium.

7 RETURN

• Returns to the previous screen of any displayed menu.

• When playing a photo/music/video file: Press to stop the playback (the display returns to the file or thumbnail view).

8 HOME

Displays or cancels the menu.

9 Number buttons

• Selects channels. For channel numbers 10 and above, enter the next digit quickly (page 29).

• In Text mode: Enters the three digit page number to select the page.

q; / – Text

In Text mode: Displays Text broadcast. Each time you press /, the display changes cyclically as follows: Text t Text over the TV picture (mix mode) t No Text (exit the Text service)

qa 2 +/– – Volume

Adjusts volume.

qs % – Mute

Press to mute the sound. Press again to restore the sound.

qd "/1 – TV standby

Press to turn the TV on or to switch to standby mode.

qf AUDIO – Dual Sound (page 26)

+ 28 hidden pages