Sony KE-65XH9005 Users guide [no, uk]
Dismantling information for use
by professional recyclers
ORIGINAL MANUAL ISSUE DATE:
Model
KE-55XH9005
KE-55XH9077
KE-55XH9096
KE-55XH9288
KE-55XH9296
KE-55XH9299
FW-55BZ40H
Conditions of Use:
(1) Please use this information only for the purpose of repair and recycling of Sony products. Using this information for any
purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the
prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-date
before using it.
：
KE-65XH9005
KE-65XH9077
KE-65XH9096
KE-65XH9288
KE-65XH9296
KE-65XH9299
FW-65BZ40H
2021.02
KE-75XH9005
KE-75XH9096
KE-75XH9288
KE-75XH9296
KE-75XH9299
FW-75BZ40H
KE-85XH9096
FW-85BZ40H
9-888-784-41
LCD TV
Sony Home Entertainment & Sound Products Inc.
© 2021.02
MODEL LISTS
MODEL REMOTE DESTINATION
KE-55XH9005
KE-55XH9077
KE-55XH9096
KE-55XH9288
KE-55XH9296
KE-55XH9299
FW-55BZ40H
KE-65XH9005 RMF-TX500E CEI, UKA
KE-65XH9077
KE-65XH9096
KE-65XH9288
KE-65XH9296
KE-65XH9299
RMF-TX500E
RMF-TX500E
RMF-TX500E
RMF-TX600E
RMF-TX500E
RMF-TX600E
RMT-TB400U
RMF-TX500E
RMF-TX500E
RMF-TX600E
RMF-TX500E
RMF-TX600E
CEI , UKA
CEI
CEI
CEI
UKA
CEI
CEI
CEI
CEI
CEI
UKA
CEI
MODEL REMOTE DESTINATION
KE-85XH9096
FW-85BZ40H
RMF-TX500E
RMT-TB400U
CEI, UKA
CEI
RMF-TX600ERMF-TX500E RMT-TB400U
FW-65BZ40H
KE-75XH9005
KE-75XH9096
KE-75XH9288
KE-75XH9296
KE-75XH9299
FW-75BZ40H RMT-TB400U CEI
RMT-TB400U
RMF-TX500E
RMF-TX500E
RMF-TX600E
RMF-TX500E
RMF-TX600E
CEI
CEI, UKA
CEI
CEI
UKA
CEI
1 LIST OF ITEMS TO BRING
1. Screwdriver (e.g. #2 Phillips Screwdriver)
2. Multimeter
3. ESD Wrist Straps
4. Metal Washer (Flat) or Coin (for remove Rear Cover)
5. Ruler (for remove Rear Cover)
2 OPTIONAL EQUIPMENT
TOOLS & EQUIPMENTS
1. Screwdriver (e.g. #0 Phillips Screwdriver)
2. Parts Tray for loose screws and small items
3. Flashlight
For Surface Mounted Parts/Connectors;
Hot-Air Type soldering Iron is needed.
Thickness: approx. 1.5mm
Diameter: 20~25mm
(wrap in tape (L=50mm))
Plastic or Metal Ruler
(In case of Metal ruler, wrap
in tape (L=50mm) for prevent
scratches)
3
DISSASSEMBLY AND REMOVAL CAUTION 55”
4
EXPLODED VIEW 55”
•Place the TV set facing downwards on a stable, level surface before disassemblyand assembly of parts.
•! and shaded parts are critical for safety. Replace only with part number specified.
• Parts contain confidential information. Strictly follow the instruction whenever the components are
repaired and/or replaced.
1-4 EXPLODED VIEW AND
PART LIST
13
12
4
14
6
(*) Parts are not stocked since they are seldom required for routine service.
Some delays should be anticipated when ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassembly. Unplug connectorsbefore disassembly
16
8
7
Stand
17
18
10
11
5
9
15
2
1
3
5
CN1202(BT)(1)
CN102(H)(1)
CN1003(LD)(1)
CN1000(LD)(1)
SP(1)
CON3(TCON)(1)
U2(TCON)(1)
HARNESS/CABLES 55”
3
6
4
7
8
5
1
2
REF. NO PART NO. DESCRIPTION REMARKS
1
2
3
4
5
6
7
8
1-006-505-11 FLEXIBLE FLAT CABLE 20P
1-006-508-11 FLEXIBLE FLAT CABLE 25P
1-007-098-11 CONNECTOR ASSY 15P
1-007-185-11 FLEXIBLE FLAT CABLE 30P
1-007-218-11 CONNECTOR ASSY 6P (SP)
1-007-220-11 CONNECTOR ASSY 28P
1-007-186-11 FLEXIBLE FLAT CABLE 41P
1-007-460-11 FLEXIBLE FLAT CABLE 51P
CN3801(B)-
CN1200(B)-
CN6601(PSU)-
CN1603(B)-
CN3501(B)-
CN1700(B)-CN6401(PSU)-
CN4201(B)-
CN4200(B)-U1(TCON)(1)
6
Loading...