Sony KDL-32EX723, KDL-40CX520, KDL-46EX720, KDL-40CX523, KDL-40EX720 Operating Instructions Manual

...

0 (0)

4-268-265-17(1)

LCD Digital Colour TV

Operating Instructions

Getting Started

Using Your BRAVIA TV

Network Setup

Additional Information

KDL-60EX720 / 55EX723 / 55EX720 / 46EX723 / 46EX720 / 46EX523 / 46EX520 / 46CX523 / 46CX520 KDL-40EX723 / 40EX720 / 40EX523 / 40EX520 / 40CX523 / 40CX520 / 32EX723 / 32EX720 / 32EX523 KDL-32EX520 / 32EX420 / 32CX523 / 32CX520 / 26EX423 / 26EX420 / 22EX423 / 22EX420

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

• The “x” that appears in the model name

corresponds to a numeric digit, related to design, colour or TV system.

• Instructions about “Installing Wall Mount

Bracket” are included within this TV’s instructions manual.

• The illustrations used in this manual are of

the KDL-40EX520 series unless otherwise state.

• The illustrations of the remote control

used in this manual are of the RM-GD019 unless otherwise stated.

• Before operating the TV, please read

“Safety Information” (page 33). Retain this manual for future reference.

Trademark information

is a registered trademark of the DVB

Project.

HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DLNA® and DLNA CERTIFIED® are trademarks and/or service marks of Digital Living Network Alliance.

DivX® is a video file compression technology, developed by DivX, Inc.

DivX®, DivX Certified®, and associated logos are trademarks of DivX, Inc. and are used under license.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

“BRAVIA” and are trademarks of Sony Corporation.

TrackID is a trademark or registered trademark of Sony Ericsson Mobile Communications AB.

Music and video recognition technology and related data are provided by Gracenote Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote. Gracenote Software, copyright © 2000present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.

Wi-Fi Protected Setup and WPA are marks of the Wi-Fi Alliance.

Notes for Australia and New Zealand model

This product is ENERGY RATING qualified in the “Home” mode. ENERGY RATING is a program designed to promote energy efficient products and practices.

• When the TV is initially set up, it is

designed to meet ENERGY RATING requirements while maintaining optimum picture quality.

• Changes to certain features, settings, and

functionalities of this TV (e.g. TV Guide, Picture/Sound, Eco-Setting) can slightly change the power consumption.

Depending upon such changed settings (e.g. “Shop” mode), the power consumption may vary which possibly could exceed the stated energy rating.

To reset the TV to ENERGY RATING qualified settings, select “Home” mode from the initial set-up procedure in “Factory Settings” under the “Set-up” menu.

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by

the manufacturer of the television.

• Only using furniture that can safely

support the television.

• Ensuring the television is not overhanging

the edge of the supporting furniture.

• Not placing the television on tall furniture

(for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

• Not standing the televisions on cloth or

other materials placed between the television and supporting furniture.

• Educating children about the dangers of

climbing on furniture to reach the television or its controls.

Notice for customers in the South Africa

The Euro/South Africa converter plug should be fitted as follows.

1 Insert the power

supply or CEE7 plug in to the converter plug.

2 Use an appropriate

screwdriver to attach the screw tightly without damaging the screw head.

3 TEST: Grip the

converter plug, and pull the VDE cord set/ transformer to ensure it is fully secure, if not then increase the torque setting and further tighten. Re-test.

The converter plug is now ready for use.

Notice for customers in India

Attach the supplied plug adaptor.

Location of the identification label

Labels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV.

Precautions

Viewing the TV

• Some people may experience discomfort

(such as eye strain, fatigue, or nausea) while watching 3D video images or playing 3D video games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing 3D video games. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images or playing 3D video games until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual of any other device or media used with this television and (ii) our website (http://www.sony-asia.com/support) for the latest information. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images or play 3D video games. Adults should supervise young children to ensure they follow the recommendations listed above.

• When using the simulated 3D function,

please note that the displayed image is modified from the original due to the conversion done by this television.

• View the TV in moderate light, as viewing

the TV in poor light or during long period of time, strains your eyes.

• When using headphones, adjust the

volume so as to avoid excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with

high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction.

• Do not push or scratch the front filter, or

place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged.

• If this TV set is used in a cold place, a

smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.

• Ghosting may occur when still pictures are

displayed continuously. It may disappear after a few moments.

• The screen and cabinet get warm when

this TV set is in use. This is not a malfunction.

• The LCD screen contains a small amount

of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury (except LED backlight LCD TV). Follow your local ordinances and regulations for disposal.

Handling and cleaning the screen surface/cabinet of the TV set

Be sure to unplug the AC power cord connected to the TV set from AC power outlet before cleaning.

To avoid material degradation or screen coating degradation, observe the following precautions.

• To remove dust from the screen surface/

cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.

• Never spray water or detergent directly on

the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set.

• Never use any type of abrasive pad,

alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.

• Periodic vacuuming of the ventilation

openings is recommended to ensure to proper ventilation.

• When adjusting the angle of the TV set,

move it slowly so as to prevent the TV set from moving or slipping off from its table stand.

Optional Equipment

Keep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur.

(Caution about handling the remote control) Notes

• Observe the correct polarity when

inserting batteries.

• Do not use different types of batteries

together or mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.

• Handle the remote with care. Do not drop

or step on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near

a heat source, a place subject to direct sunlight, or a damp room.

Disposal of the TV set

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union

and other European countries with separate collection systems)

This symbol is on the remote control.

Disposal of the TV set

Disposal of Old

Electrical &

Electronic

India only

This symbol indicates that this product shall not be treated as household waste and may not be dropped in garbage bins. Product owners are advised to deposit their product at the nearest collection point for the recycling of electrical and electronic equipment. Your co-operation shall facilitate proper disposal & help prevent potential negative consequences/hazards to the environment and human health, which could otherwise be caused by inappropriate waste disposal including improper handling, accidental breakage, damage and/ or improper recycling of e-waste. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local civic office, your household waste disposal service provider or the store where you made the purchase. You may contact our company’s toll free number in India for assistance.

Equipment

(Applicable in

Republic of India)

Table of Contents

Getting Started

Checking the accessories ........................................................................................................6

Inserting batteries into the remote............................................................................................6

1: Attaching the Table-Top Stand ............................................................................................7

2: Adjusting the viewing angle of the TV ..................................................................................8

3: Connecting an antenna/cable/VCR....................................................................................10

4: Connecting audio/video devices ........................................................................................11

5: Preventing the TV from toppling over.................................................................................11

6: Organizing the AC power cord/Bundling the cables...........................................................12

7: Performing the initial set-up ...............................................................................................13

Using Your BRAVIA TV

Watching the TV.....................................................................................................................14

Selecting various functions and settings (Home Menu) .........................................................16

Displaying Operating Instructions (i-Manual) .........................................................................18

Network Setup

Preparing a wired network .....................................................................................................20

Preparing a wireless LAN.......................................................................................................20

Setting up the Internet connection .........................................................................................21

If you cannot connect to the Internet......................................................................................22

Adjusting the server display settings......................................................................................22

Additional Information

Troubleshooting .....................................................................................................................24

Specifications.........................................................................................................................25

Installing the Accessories (Wall-Mount Bracket).................................................................... 27

Safety Information ..................................................................................................................33

After setting up your BRAVIA TV and learning basic operations with this manual, see the built-in manual (i-Manual) for further explanation of the features of your TV.

This TV has a built-in manual (i-Manual). To access the i-Manual, press i-MANUAL on the remote, and select an item. For details, see page 18 of this manual. Contents of the i-Manual may differ depending on the model/region/area.

Contents of the i-Manual

* Some models do not have this feature.

How to Use i-Manual

“BRAVIA” TV Features

3D Feature* Presence Sensor “BRAVIA” Internet Video Internet Widgets Wireless LAN Ready “BRAVIA” Sync with “Control for HDMI” Skype Ready* TrackID™/Music Search/Video Search

Watching TV

3D Feature* Digital Electronic Programme Guide* Programme Guide for Digital Text* Favourites Wide Mode Picture Mode Text Photos/Music/Videos Twin Picture (PIP) Twin Picture (P&P)

Settings/Home Menu

About the Home Menu Settings Display Sound System Settings

i-Manual Digital Set-up Analogue Set-up External Inputs Network Product Support

Using Other Equipment/Internet

VCR/DVD Player Audio System USB Device (e.g. Digital Camera) Picture Frame HDMI Equipment Internet/Wireless LAN Home Network Media Remote PC

Parts Description

Remote TV Controls and Indicators Terminals

Troubleshooting

Index

Bookmarks

Getting Started

Checking the accessories

Remote (1) Size AAA batteries (R03 type) (2) Table-Top Stand (1)* Fixing screws for Table-Top Stand (M4 × 12) (2) (for KDL-26/22EX42x) Fixing screws for Table-Top Stand (M5 × 16) (3) (for KDL-55/46/40/32EX72x,

KDL-46/40/32EX52x, KDL-46/40/32CX52x, KDL-32EX420)

Assembling screws for Table-Top Stand (M4 × 12) (2) (for KDL-26/22EX42x) Assembling screws for Table-Top Stand (M5 × 16) (2) (for KDL-32EX420 (Australia

and New Zealand model))

Assembling screws for Table-Top Stand (M6 × 14) (4) (for KDL-60/55/46EX72x,

KDL-46EX52x, KDL-46CX52x)

Assembling screws for Table-Top Stand (M6 × 14) (3) (for KDL-40/32EX72x,

KDL-40/32EX52x, KDL-40/32CX52x, KDL-32EX420 (except Australia and New Zealand model)) Hexagon wrench (1) (except KDL-32EX420 (Australia and New Zealand model), KDL-26/22EX42x)

Operating Instructions (this manual) and other documents

Inserting batteries into the remote

B KDL-55/46/40/32EX723 and

KDL-60/55/46/40/32EX720

1 Remove the protection sheet. 2 Push and slide the cover upward.

B KDL-46/40/32EX523, KDL-46/40/32EX520,

KDL-46/40/32CX523, KDL-46/40/32CX520, KDL-26/22EX423 and KDL-32/26/22EX420

*1Assemble the Table-Top Stand with the supplied

assembling screws. Refer to the supplied Table-Top Stand leaflet to assemble the stand.

1 Remove the protection sheet. 2 Push and lift the cover to open.

1: Attaching the Table-Top

Stand

Except KDL-60EX720

1 Refer to the supplied Table-Top Stand

leaflet for proper attachment for some TV models.

2 Place the TV set on the Table-Top Stand.

B KDL-55/46/40/32EX723,

KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520, KDL-46/40/32CX523, KDL-46/40/32CX520 and KDL-32EX420 (except Australia and New Zealand model)

Guide pins

B KDL-55/46/40/32EX723,

KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520, KDL-46/40/32CX523, KDL-46/40/32CX520 and KDL-32EX420 (except Australia and New Zealand model)

Getting Started

B KDL-32EX420 (Australia and New Zealand

model)

B KDL-32EX420 (Australia and New Zealand

model)

Guide pins

• Align the TV from the top, slide it in until the guide

pins cannot be seen.

B KDL-26/22EX423 and KDL-26/22EX420

3 Fix the TV to the Table-Top Stand

according to the arrow marks that guide the screw holes using the supplied screws.

B KDL-26/22EX423 and KDL-26/22EX420

• If using an electric screwdriver, set the torque at

approximately 1.5 N·m {15 kgf·cm}.

(Continued)

For KDL-60EX720

1 Align with the two dowels of the Table-

Top Stand, and gently place the TV, checking the f mark is facing the front.

Neck

2 Attach the TV and Table-Top Stand with

the supplied screw and hexagon wrench.

Detaching the Table-Top Stand from the TV

To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. For KDL-60EX720, be sure to remove the screws for detaching the head when the Table-Top Stand is not attached to the TV.

• Do not remove the Table-Top Stand for any reason

other than to install corresponding accessories on the TV.

• When removing the Table-Top Stand from the TV,

lay the display face down on a stable work surface that is larger than the TV.

• To prevent damaging the surface of the LCD

display, make sure to place a soft cloth on the work surface.

2: Adjusting the viewing

angle of the TV

This TV can be adjusted within the angles as illustrated.

Head

* 3 N·m {30 kgf·cm}

• Set the torque setting to approximately 3 N·m {30

kgf·cm}.

Angle adjustment (Swivel) (except KDL-60EX720/ KDL-26/22EX42x)

• When adjusting the angle, hold the stand with one

hand to avoid having the stand slip or TV tip over.

B Except KDL-32EX420 (Australia and New

Zealand model)

20°

B KDL-32EX420 (Australia and New Zealand

model)

15°

20°

15°

Angle adjustment (Tilt) (except KDL-60EX720/ KDL-46/40/32CX523/ KDL-46/40/32CX520)

• Be careful not to pinch your fingers between the TV

and stand when adjusting the angle.

B KDL-55/46/40/32EX723,

KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520 and KDL-32EX420 (except Australia and New Zealand model)

0° - 6°

B KDL-26/22EX423 and KDL-26/22EX420

B KDL-32EX420 (Australia and New Zealand

model)

0°

Getting Started

6°

0° - 6°

• Ensure that there are no objects in front of the TV.

IR Sensor

3D Sync Transmitter (KDL-55/46/40/32EX72x only)

Presence Sensor

• Do not expose the Presence Sensor to direct sunlight

or other strong light, as malfunction may occur.

3: Connecting an antenna/

cable/VCR

Connecting an antenna/cable

Connecting an antenna/cable and VCR

Antenna cable (not supplied)

AV cable (not supplied)

Antenna cable (not supplied)

Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI

Antenna cable (not supplied)

VCR

Set Top Box/recorder (e.g. DVD recorder)

4: Connecting audio/video

devices

Antenna cable (not supplied)

AV cable (not supplied)

5: Preventing the TV from

toppling over

Getting Started

1 Install a wood screw (4 mm in diameter,

not supplied) in the TV stand.

DVD Player

Antenna cable (not supplied)

2 Install a machine screw (M4, not

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord (not supplied).

The length of the M4 machine screw differs depending on the cord diameter. Please refer to below illustration.

Screw M4 Cord

5 - 6 mm

TV’s Table-Top Stand

+ 25 hidden pages