Sony HT-CT790 Operating Instructions

Sound Bar

Operating Instructions

The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. http://www.sony.com/soundbarsupport

Le logiciel de ce système est susceptible d’être mis à jour. Pour en savoir plus sur les éventuelles mises à jour disponibles, visitez l’URL suivante. http://www.sony.com/soundbarsupport

El software de este sistema podria actualizarse en el futuro. Para obtener mas informacion sobre las actualizaciones disponibles, visite la URL siguiente. http://www.sony.com/soundbarsupport

Manuel d’instructions

Manual de instrucciones

4-586-049-14(1)

HT-CT790

Owner’s Record

The model and serial numbers are located on the bottom of the Bar Speaker. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. HT-CT790

Serial No.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.

To reduce the risk of fire, do not cover the ventilation ope ning of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.

As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.

Indoor use only.

For the Bar Speaker

The nameplate and date of manufacture are located on the bottom of the Bar Speaker.

For the customers in the U.S.A.

The Caution Marking is put on the Bottom Enclosure (For the Bar Speaker).

This symbol is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or othe r apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A.

Other versions may not comp ly with FCC technical regulations.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet

on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals in order to meet FCC emission limits.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Compliance with FCC requirement

15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure.

(1) This device may not cause

interference; and

(2) This device must accept any

interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

5.15 - 5.25 GHz band is restricted to indoor operations only.

High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 56505850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Frequency Tolerance: ±20 ppm or less

For the customers in Canada

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals.

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

Table of Contents

Supplied Accessories ..................... 7

Guide to Parts and Controls ..........8

About the Home Menu ................ 13

Connecting and Preparation

Basic connections and preparation

Connection for Viewing Copyright-

protected 4K Content ............ 16

Mounting the Unit on a Wall ....... 18

Connecting to a Wired

Network ................................. 19

Connecting to a Wireless

Network ..................................21

Startup Guide (separate



document)

Listening to the Sound

Listening to the TV ......................23

Listening to the Connected

Device ....................................23

Listening to Music on a USB

Device ....................................24

Selecting the Sound Effect

Setting the Sound Effect that is

Tailored to Sound Sources

(SOUND FIELD) .......................26

Enjoying Clear Sound with Low

Volume at Midnight

(NIGHT) ..................................27

Making Dialogues Clearer

(VOICE) ...................................27

Adjusting the Volume of the

Subwoofer .............................28

Adjusting the Delay Between the

Picture and Sound .................28

Listening to Music/Sound with the BLUETOOTH Function

Listening to Music from a Mobile

Device ....................................30

Listening to Sound of the

Connected TV or Device from

Headphones or Speakers ...... 33

Enjoying with the Network Function

Listening to Music on your PC via a

Home Network ......................36

Listening to Music on Music

Services ..................................37

Listening to Music on the Mobile

Device with SongPal .............38

Using Google Cast .......................39

Connecting the SongPal Link-

Compatible Device

(Wireless Multi Room/

Wireless Surround) ................39

Displaying the Screen of the Mobile

Device on a TV

(MIRRORING) .........................41

Using the Various Functions/ Settings

Performing the Wireless Connection

of the Subwoofer (LINK) ........43

Playing Compressed Audio Files

with Natural Sound

Quality ...................................44

Enjoying Multiplex Broadcast Sound

(AUDIO) ..................................44

Deactivating Buttons on

the Unit ..................................45

Changing the Brightness of the

Front Panel Display and

BLUETOOTH Indicator

(DIMMER) ..............................45

Saving Power in Standby

Mode ..................................... 46

Using the Control for HDMI

Function .................................47

Using the “BRAVIA” Sync

Function ................................ 49

Using the Setup Display ...............51

Options Menu List ....................... 58

Troubleshooting

Troubleshooting .......................... 59

Resetting the System ...................67

Additional Information

Specifications .............................. 68

Playable Types of Files ................ 70

Supported Input Audio

Formats ..................................71

Supported Input Video

Formats ..................................72

On BLUETOOTH

Communication .....................73

END USER LICENSE

AGREEMENT ...........................74

Precautions ..................................78

Index ............................................ 82

Supplied Accessories

•Bar Speaker (1)

• Wall mounting brackets (2), Screws (2)

• HDMI cable (4K 60p 18Gbps compatible) (1)

•Startup Guide (1)

•Subwoofer (1)

• Remote control (1)

• R03 (size AAA) batteries (2)

• Operating Instructions (1)

Guide to Parts and Controls

Details are omitted from the illustrations.

Unit (Bar Speaker)

Front

 Remote control sensor  Front panel display  BLUETOOTH indicator (blue)

– Flashes quickly in blue: During

pairing standby status

– Flashes in blue: BLUETOOTH

connection is being attempted

– Lights in blue: BLUETOOTH

connection has been established

 (power) button

Turns on the system or sets it to standby mode.

 INPUT button (page 13, 23)  PAIRING button (page 30)  VOL +/– buttons

 N-Mark (page 31)

When using the NFC function, touch your NFC-compatible device to the mark.

 (USB) port

Rear

 LAN(100) port  TV IN (OPTICAL) jack  ANALOG IN jack  HDMI IN 3 jack

Compatible with HDCP 2.2.

 HDMI IN 2 jack

Compatible with HDCP 2.2.

 HDMI IN 1 jack

Compatible with HDCP 2.2.

 HDMI OUT (TV (ARC)) jack

Compatible with HDCP 2.2.

Subwoofer

 Power indicator

– Lights in red: The subwoofer is in

standby mode

– Flashes in green: While

attempting link connection

– Lights in green: The subwoofer is

connected to the system with the link function

 (power) button

Turns on the subwoofer or sets it to standby mode.

 LINK button (page 43)  Ventilation holes

For safety, do not block the ventilation holes.

Remote Control

 INPUT +/– (page 13, 23)

 (power)

Turns on the system or sets it to standby mode.

 DISPLAY

Displays playback information on the TV screen.

 CLEAR AUDIO+ (page 26)

SOUND FIELD (page 26) VOICE (page 27) NIGHT (page 27)

 DIMMER (page 45)  Color buttons

Shortcut keys for selecting items on some menus.

 MIRRORING (page 41)

PAIRING (page 30)

 OPTIONS (page 28, 58)

BACK (page 13) /// (page 13)

(enter) (page 13)

HOME (page 13)

 (muting)

Turns off the sound temporarily.

 (volume) +/–

Adjusts the volume.

SW  (subwoofer volume) +/–

Adjusts the volume of the subwoofer.

 Playback operation buttons

/ (rewind/fast forward)

Searches backward or forward.

/ (previous/next)

Selects the previous/next chapter, track, or file.

 (play)

Starts or re-starts playback (resume play).

 (pause)

Pauses or re-starts playback.

 (stop)

Stops playback.

 RX/TX (receiver/transmitter)

(page 34)

 AUDIO (page 44)

About the Home Menu

[Setup]

Input list

[Wireless Surround]

HOME

BACK

///, (enter)

You can display the home menu on the TV screen by connecting the system and TV with the HDMI cable (supplied). From the home menu, you can set the various settings by selecting [Setup] or select the input or service that you want to watch from the input list.

Using the Home Menu

1 Press HOME.

The home menu appears on the TV screen.

2 Press /// to select [Setup], an item on the input list, or [Wireless

Surround], then press .

The selected input, setup display, or setting display for the wireless surround function appears on the TV screen. To return to the previous screen, press BACK.

Input list

Input name Explanation [TV] Outputs the TV sound. (page 23) [HDMI1] Outputs the sound of device that is connected to the HDMI IN 1

[HDMI2] Outputs the sound of device that is connected to the HDMI IN 2

[HDMI3] Outputs the sound of device that is connected to the HDMI IN 3

[Bluetooth Audio] Outputs the sound of device that is connected with the

[Analog] Outputs the sound of device that is connected to the ANALOG IN

[USB] Outputs music or plays back photo files stored on a connected

[Screen mirroring] Displays the screen of the mobile device on the TV screen.

[Home Network] Outputs music or plays back photo files on the device that is

[Music Services] Uses music services on the Internet. (page 37)

jack. (page 23)

BLUETOOTH function. (page 30)

jack.

USB device. (page 24)

(page 41)

connected via the network. (page 36)

[Setup]

See “Using the Setup Display” (page 51).

[Wireless Surround]

Displays the setting display for the wireless surround function that allows you to use the wireless speakers (not supplied) as the surround speakers of the system. Perform the setting by following the on-screen instructions.

Tip

You can also select the input by pressing INPUT +/– repeatedly.

About the Steps Description

In these Operating Instructions, the operations are described as steps that are operated on the home menu displayed on the TV screen by using the remote control while the system and TV are connected with the HDMI cable (supplied).

The operating steps that select items on the TV screen by using /// and are simplified in the following way.

Example: Select [Setup] from the home menu.

The operation that selects an item by pressing /// and is expressed as “select.”

Example: Select [Network Settings] - [Internet Settings] - [Wired Setup] on the home menu.

When repeating the operation that selects an item by pressing /// and , the selected items are linked with “-.”

Tips

• You can use the buttons on the unit if they have the same or similar names as those on the remote control.

• Characters in brackets [ ] appear on the TV screen. Characters in quotes “ ” appear in the front panel display.

Connecting and Preparation

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc™ player, cable box, or satellite box, etc.

HDCP2.2-

compatible

HDMI jack

 HDMI cable (supplied)  HDMI cable (not supplied)

Premium High Speed HDMI Cable with Ethernet that supports 18Gbps is recommended.

Connection for Viewing Copyright-protected 4K Content

Connecting a 4K TV and 4K Device

To view copyright-protected 4K content and listen to sound from the system, connect the TV and device to the system via an HDCP2.2-compatible HDMI jack. You can only view copyright-protected 4K content through the HDCP2.2compatible HDMI jack connection.

1 Check which HDMI input jack on

your TV is compatible with HDCP2.2.

Refer to the operating instructions of the TV.

2 Connect the HDCP2.2-compatible

HDMI input jack on the TV and HDMI OUT jack on the unit with the HDMI cable (supplied).

TV connection is completed.

Connecting and Preparation

3 Connect the HDCP2.2-compatible

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc player, cable box, or satellite box, etc.

HDCP2.2-

compatible

HDMI jack

 HDMI cable (supplied)  HDMI cable (not supplied)

Premium High Speed HDMI Cable with Ethernet that supports 18Gbps is recommended.

 Optical digital cable (not supplied)

HDMI output jack of the 4K device and HDMI IN jack of the unit with the HDMI cable (not supplied).

Refer to the operating instructions of the 4K device to check that the HDMI OUT jack of the 4K device is compatible with HDCP2.2. 4K device connection is completed.

4 Play copyright-protected 4K

content.

The image appears on the TV screen and the sound is output from the system.

Tip

You can connect the 4K device to any of HDMI IN 1, HDMI IN 2, or HDMI IN 3 jack because all jacks are compatible with HDCP2.2.

When the TV’s HDMI Jack is not Labeled with ARC

If your TV’s HDCP2.2-compatible HDMI IN jack is not compatible with ARC, the TV sound is not output from the system. In this case, connect the optical output jack of the TV and the TV IN (OPTICAL) jack on the unit with an optical digital cable (not supplied).

Mounting the Unit on a

Screw (supplied)

Wall mounting brackets (supplied)

Hole on the wall mounting bracket

4mm (3/16 in)

More than 30 mm (1 3/16 in)

4.6 mm (3/16 in)

10 mm (13/32 in)

Wall

You can mount the unit on a wall.

Notes

• Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely in the wall beam. Install the speakers horizontally, hung by screws in studs in a continuous flat section of the wall.

• Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation.

• Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural disaster, etc.

1 Fix the wall mounting brackets

(supplied) to the bracket fixing holes on the bottom of the unit with the screws (supplied) so that the surface of each wall mounting bracket is as shown in the illustration.

Fix the two wall mounting brackets to the left and right fixing holes on the bottom of the unit.

2 Prepare screws (not supplied) that

are suitable for the holes on the wall mounting bracket.

Connecting and Preparation

3 Fasten the screws in the wall.

(approx. 5/32 in)

730 mm (28 37/50 in)

3.5 mm to

4.5 mm

Internet

LAN cable (not supplied)

Server

Router

Modem

The screw should protrude as illustration.

Connecting to a Wired Network

4 Hang the holes of the mounting

bracket on the screws.

Align the holes at of the mounting bracket with the screws, then hang the unit on the two screws.

Prepare the network by connecting the system and PC to your home network with a LAN cable.

Connecting to a PC or Router with a LAN Cable

The following illustration is the example for connection of the system and PC to your home network.

Note

The server needs to be connected to the same network as that of the system.

Tip

We recommend that you use a shielded straight interface cable (not supplied).

Connecting by Obtaining the Network Information Automatically

1 Press HOME.

The home menu appears on the TV screen.

2 Select [Setup] from the home

menu.

The setup display appe ars on the TV screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Auto].

The system starts network settings and the network setting status appears. Press / to browse information, and then press .

5 Select [Save & Connect].

The system starts connecting to the network. For details, refer to the messages that appear on the TV screen.

Connecting by Using a

Fixed IP Address

5 Perform the setting by following

the on-screen instructions.

The system starts network settings and the network setting status appears. Press / to browse information, and then press .

6 Select [Save & Connect].

The system starts connecting to the network. For details, refer to the messages that appear on the TV screen.

1 Press HOME.

The home menu appears on the TV screen.

2 Select [Setup] from the home

menu.

The setup display appe ars on the TV screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Manual].

Connecting and Preparation

Connecting to a Wireless Network

Prepare the network by connecting the system and PC to your wireless LAN router.

Note

The server needs to be connected to the same network as that of the system.

Connecting with the WPS Button

When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)compatible, you can easily set the network settings with the WPS button.

1 Press HOME.

The home menu appears on the TV screen.

2 Select [Setup] from the home

menu.

The setup display appe ars on the TV screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless Setup] - [Wi-Fi Protected Setup™ (WPS)].

4 Select [Start]. 5 Press the WPS button on the

access point.

The system starts connecting to the network.

Connecting by Selecting the Network Name (SSID)

If your wireless LAN router (access point) is not compatible with Wi-Fi Protected Setup (WPS), check the following information in advance. – The network name (SSID)*

_____________________________________

– The security key (password)**

_____________________________________

* SSID (Service Set Identifier) is a name that

identifies a particular access point.

**This information should be available

from a label on your wireless LAN router/ access point, from the operating instructions, from the person who set up your wireless network, or from the information provided by your Internet service provider.

1 Press HOME.

The home menu appears on the TV screen.

2 Select [Setup] from the home

menu.

The setup display appea rs on the TV screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless Setup].

The list of the network name appears on the TV screen.

4 Select the desired network name

(SSID).

5 Enter the security key (or

passphrase) using the software keyboard, and then select [Enter].

The system starts connecting to the network.

Connecting by Using a Fixed IP Address

Select [New connection registration] [Manual registration] in step 4 of “Connecting by Selecting the Network Name (SSID)”and follow the on-screen instructions.

Connecting by Using a PIN Code

Select [New connection registration] in step 4 of “Connecting by Selecting the Network Name (SSID)” and select [(WPS) PIN Method].

Connecting by SongPal

SongPal app can connect the system to the same wireless network as that of the mobile device. For details, follow the instruction of the app or refer to the following URL. http://info.songpal.sony.net/help/

Listening to the Sound

Listening to the TV

1 Press HOME.

The home menu appears on the TV screen.

2 Select [TV] on the home menu. 3 Select the program using the TV’s

remote control.

The selected TV program appears on the TV screen and the TV sound is output from the system.

4 Adjust the volume.

• Adjust the volume by pressing 

+/– on the remote control.

• Adjust the subwoofer volume by

pressing SW  +/– on the remote control (page 28).

Tip

You can select [TV] by pressing INPUT +/– on the remote control.

Listening to the Connected Device

1 Press HOME.

The home menu appears on the TV screen.

2 Select the input that the desired

device is connected on the home menu.

The image of the selected device appears on the TV screen and the sound is output from the system. If you select [Analog], the home menu is displayed on the TV screen.

3 Adjust the volume.

• Adjust the volume by pressing 

+/– on the remote control.

• Adjust the subwoofer volume by

pressing SW  +/– on the remote control (page 28).

Tip

You can select the input by pressing INPUT +/– on the remote control.

Changing the Input Name Displayed on the Home Menu

You can change the input name of [HDMI1], [HDMI2], or [HDMI3] that is displayed on the home menu.

1 Press HOME.

The home menu appears on the TV screen.

2 Put the cursor on [HDMI1],

[HDMI2], or [HDMI3] on the home menu, then press OPTION.

The options menu appears on the TV screen.

3 Select [Input Label].

4 Select the input name.

You can select the input name from the following.

•[BD Player]

•[DVD Player]

•[Cable Box]

• [Satellite]

•[GAME]

•[PC]

5 Press to complete.

Tip

When you change the input name, the displayed icon is also changed automatically.

Listening to Music on a USB Device

You can play music/photo files stored on a connected USB device. For playable types of files, see “Playable Types of Files” (page 70).

1 Connect the USB device to the

(USB) port.

2 Press HOME.

The home menu appears on the TV screen.

3 Select [USB (Connected)] from

the home menu.

4 Select [Music] - folder on which

songs are stored - song.

The selected song is played and sound is output from the system.

5 Adjust the volume.

• Adjust the volume by pressing 

+/– on the remote control.

• Adjust the subwoofer volume by

pressing SW  +/– on the remote control (page 28).

Note

Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the system

Listening to the Sound

off before connecting or removing the USB device.

Tip

You can perform various operations from the options menu (page 58).

Viewing Photos on a USB Device

You can play photo files stored on a connected USB device. For playable types of files, see “Playable Types of Files” (page 70).

Photo] - folder on which

Select [ photos are stored - photo in step 4.

The selected photo appears on the TV screen.

Tip

You can perform various operations from the options menu (page 58).

Selecting the Sound Effect

SOUND FIELD

CLEAR AUDIO+

Setting the Sound Effect that is Tailored to Sound Sources (SOUND FIELD)

You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources.

1 Press SOUND FIELD.

The sound field menu appears on the TV screen.

2 Press the button repeatedly to

select the desired sound field.

Sound field Explanation [ClearAudio+]

[Movie]

[Music]

The appropriate sound setting is automatically selected for the sound source.

Sound effects are optimized for movies. This mode replicates the density and rich expanse of sound.

Sound effects are optimized for music.

Sound field Explanation [Sports]

[Game Studio]

[Standard]

Note

When using the wireless multi room or wireless surround function, the sound field function is not available.

Tips

• You can select [ClearAudio+] by pressing CLEAR AUDIO+ on the remote control.

• You can select the sound field from the options menu (page 58).

Commentary is clear, cheers are heard as surround sound, and sounds are realistic.

Sound effects are optimized for game play.

Sound effects are optimized for the individual source.

Selecting the Sound Effect

Enjoying Clear Sound

NIGHT

VOICE

with Low Volume at Midnight (NIGHT)

Sound is output at low volume with minimum loss of fidelity and clarity of dialogue.

1 Press NIGHT.

The night mode appears on the TV screen.

2 Press the button repeatedly to

select the night mode.

Mode Explanation [On] Activates the night

[Off] Deactivates the night

Tip

You can select [Night] from the options menu (page 58).

mode function.

Making Dialogues Clearer (VOICE)

1 Press VOICE.

The voice mode appears on the TV screen.

2 Press the button repeatedly to

select the voice mode.

Mode Explanation [Up Off] Standard [Up 1] Dialogue is easily

[Up 2] Dialogue range is

Tip

You can select [Voice] from the options menu (page 58).

heard by enhancing dialogue range.

enhanced, and dialogue sound may be e asy to h ear for the elderly.

Adjusting the Volume of

SW  +/–

OPTIONS

///,

the Subwoofer

The subwoofer is designed for playback of bass or low frequency sound.

Press SW (subwoofer volume)  +/– to adjust the volume of the subwoofer.

Note

When the input source does not contain much bass sound, such as in TV programs, the bass sound from the subwoofer may be difficult to hear.

Adjusting the Delay Between the Picture and Sound

When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the input.

When Watching the TV

1 Press OPTIONS.

“SYNC” appears in the front panel display.

2 Press  or

The adjusting time appears in the front panel display.

3 Adjust the delay using /, then

press .

You can adjust from 0 msec to 300 msec in 25 msec increments.

4 Press OPTIONS.

The options menu in the front panel display turns off.

Selecting the Sound Effect

When Watching Another Device

1 Press OPTIONS.

The options menu appears on the TV screen.

2 Select [A/V SYNC]. 3 Adjust the delay using /, then

press .

You can adjust from 0 msec to 300 msec in 25 msec increments.

Listening to Music/Sound with the

INPUT +/–

PAIRING

SW  +/–

HOME

 +/–

Playback operation buttons

RX/TX

BLUETOOTH Function

Listening to Music from a Mobile Device

You can listen to music stored on a mobile device such as a smartphone or tablet via a wireless connection by connecting the system and the mobile device with the BLUETOOTH function. When connecting to the mobile device with the BLUETOOTH function, you can operate by simply using the supplied remote control without turning the TV on.

Listening to Music by Pairing with a Mobile Device

1 Press PAIRING.

The system enters the pairing mode, “BT” appears in the front panel display, and the BLUETOOTH indicator flashes quickly.

2 Turn on the BLUETOOTH function,

and then select “HT-CT790” after searching for it on the mobile device.

If a Passkey is requested, enter “0000.”

3 Make sure that the BLUETOOTH

indicator on the unit lights in blue.

A connection between the system and mobile device has been established.

4 Start audio playback with the

music app on the connected mobile device.

Sound is output from the unit.

5 Adjust the volume.

• Adjust the volume by pressing 

+/– on the remote control.

• Adjust the subwoofer volume by

pressing SW  +/– on the remote control (page 28).

• You can play or pause the content by using the playback operation buttons on the remote control.

+ 229 hidden pages