Sony HCD-DZ860W, HCD-DZ870KW, HCD-DZ870M, HCD-DZ870W Service Manual

HCD-DZ860W/DZ870KW/

DZ870M/DZ870W

SERVICE MANUAL

Ver. 1.1 2008.07

Photo : HCD-DZ870KW

• HCD-DZ860W/DZ870KW/DZ870M/DZ870W are the ampliﬁ er, DVD/CD and tuner section in DAV-DZ860W/DZ870KW/DZ870M/DZ870W.

This system incorporates with Dolby* Digital and Dolby Pro Logic (II) adaptive matrix surround decoder and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

** Manufactured under license from DTS, Inc.

“DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.

SPECIFICATIONS

AEP Model

UK Model

HCD-DZ860W

E Model

HCD-DZ870KW/DZ870W

Australian Model

HCD-DZ870W

Russian Model

HCD-DZ870M

Model Name Using Similar Mechanism HCD-DZ260/DZ270/HDZ278 Mechanism Type CDM85-DVBU102 Optical Pick-up Name

KHM-313CAA/C2RP

Ampliﬁ er Section (DZ860W/DZ870KW)

Stereo mode (rated) 108 W + 108 W (at 3 ohms,

1 kHz, 1% THD)

Surround mode (reference) RMS output power

FL/FR/C*: 143 watts (per channel at 3 ohms, 1 kHz, 10% THD) Subwoofer*: 285 watts (at

1.5 ohms, 80 Hz, 10% THD)

Ampliﬁ er Section (DZ870M)

Stereo mode (rated) 108 W + 108 W (at 3 ohms,

1 kHz, 1% THD)

Surround mode (reference) RMS output power

FL/FR/C/SL/SR*: 143 watts (per channel at 3 ohms, 1 kHz, 10% THD) Subwoofer*: 285 watts (at

1.5 ohms, 80 Hz, 10% THD)

Ampliﬁ er Section (DZ870W)

Latin American models: Stereo mode (rated) 108 W + 108 W (at 3 ohms,

1 kHz, 1% THD)

Surround mode (reference) RMS output power

FL/FR/C*: 142 watts (per channel at 3 ohms, 1 kHz, 10% THD) Subwoofer*: 284 watts (at

1.5 ohms, 80 Hz, 10% THD)

Other models: Stereo mode (rated) 108 W + 108 W (at 3 ohms,

1 kHz, 1% THD)

Surround mode (reference) RMS output power

FL/FR/C*: 143 watts (per channel at 3 ohms, 1 kHz, 10% THD) Subwoofer*: 285 watts (at

1.5 ohms, 80 Hz, 10% THD)

* Depending on the decoding mode settings and the

source, there may be no sound output.

Inputs (Analog) (DZ860W) TV (AUDIO IN) Sensitivity: 450/250 mV LINE(AUDIO IN) Sensitivity: 450/250 mV AUDIO IN Sensitivity: 250/125 mV Inputs (Analog) (DZ870KW/DZ870M) TV (AUDIO IN) Sensitivity: 450/250 mV SAT/CABLE (AUDIO IN) Sensitivity: 450/250 mV AUDIO IN/MIC1 Sensitivity: AUDIO IN

250/125 mV/MIC1 1 mV MIC2 Sensitivity: 1 mV Inputs (Analog) (DZ870W) TV (AUDIO IN) Sensitivity: 450/250 mV SAT/CABLE (AUDIO IN) Sensitivity: 450/250 mV AUDIO IN Sensitivity: 250/125 mV Inputs (Digital) (DZ860W/DZ870KW/DZ870M/ DZ870W) TV (COAXIAL IN/OPTICAL IN)

Impedance: 75 ohms/Outputs (Analog) (DZ860W/DZ870W) Phones Accepts low- and high impedance headphones.

Super Audio CD/DVD System

Laser Semiconductor laser

(Super Audio CD/DVD: λ = 650 nm) (CD: λ = 790 nm) Emission duration:

continuous Signal format system Mexican and Latin American models:

NTSC Other models: PAL/NTSC

USB Section

Supported bit rate MP3 (MPEG 1 Audio Layer-3):

32 kbps - 320 kbps WMA: 48 kbps - 192 kbps AAC: 48 kbps - 320 kbps Sampling frequencies MP3 (MPEG 1 Audio Layer-3):

32/44.1/48 kHz WMA: 44.1 kHz AAC: 44.1 kHz

(USB) port:

Maximum current: 500 mA

– Continued on next page –

DVD RECEIVER

9-889-099-02

2008G04-1

2008.07

Sony Corporation

Audio&Video Business Group Published by Sony Techno Create Corporation

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Ver. 1.1

Tuner Section

System PLL quartz-locked digital synthesizer FM tuner section Tuning range 87.5 MHz - 108.0 MHz (50 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Mexican, and Latin American models: 530 kHz - 1,710 kHz (with the interval set at 10 kHz) 531 kHz - 1,710 kHz (with the interval set at 9 kHz) European, Russian, and Middle Eastern models: 531 kHz - 1,602 kHz (with the interval set at 9 kHz) Australian and New Zealand models: 531 kHz - 1,710 kHz (with the interval set at 9 kHz) 530 kHz - 1,710 kHz (with the interval set at 10 kHz) Other models: 531 kHz - 1,602 kHz (with the interval set at 9 kHz) 530 kHz - 1,610 kHz (with the interval set at 10 kHz) Antenna (aerial) AM loop antenna (aerial) Intermediate frequency 450 kHz

Video Section (DZ860W)

Outputs VIDEO: 1 Vp-p 75 ohms R/G/B: 0.7 Vp-p 75 ohms HDMI OUT: Type A (19 pin)

Video Section (DZ870KW/DZ870M/DZ870W)

Outputs VIDEO: 1 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms PB/CB, PR/CR: 0.7 Vp-p 75 ohms HDMI OUT: Type A (19 pin)

General

Power requirements Mexican models: 120 V AC, 60 Hz Taiwan models: 120 V AC, 50/60 Hz Latin American models: 110 V - 240 V AC, 50/60 Hz Other models: 220 V - 240 V AC, 50/60 Hz Power consumption HCD-DZ870M: On: 160 W Standby: 0.3 W (at the Power Saving mode) HCD-DZ860W/DZ870KW/DZ870W: On: 130 W Standby: 0.3 W (at the Power Saving mode) Output voltage (DIGITAL MEDIA PORT) DC 5 V Output current (DIGITAL MEDIA PORT) 700 mA Dimensions (approx.) 430 mm × 66 mm × 385 mm (w/h/d) incl. projecting parts HCD-DZ860W/DZ870KW/DZ870W: 430 mm × 66 mm × 415 mm (w/h/d) with the wireless transceiver inserted Mass (approx.) 4.3 kg

Design and speciﬁ cations are subject to change without notice.

MODEL IDENTIFICATION – Back Panel –

Parts No.

Model Part No.

DZ860W: AEP, UK model DZ870KW: SP model DZ870M: RU model DZ870KW: TH model DZ870W: E3 model DZ870W: MX model DZ870W: AUS model DZ870W: KR model DZ870W: E32 model DZ870W: TW model DZ870W: E15 model DZ870W: EA model

3-273-763-1[] 3-273-763-2[] 3-273-763-3[] 3-273-763-5[] 3-273-764-0[] 3-273-764-1[] 3-273-764-2[] 3-273-764-4[] 3-273-764-5[] 3-273-764-6[] 3-273-764-9[] 3-875-160-7[]

• Abbreviation AUS : Australian model E3 : 240V AC area in E model E15 : Iran model E32 : 110-240V AC area in E model EA : Saudi Arabia model KR : Korean model MX : Mexican model RU : Russian model SP : Singapore model TH : Thai model TW : Taiwan model

Special Component Notice

The components identiﬁ ed by mark 9 contain conﬁ dential infor- mation. Strictly follow the instructions whenever the components are repaired and/or replaced.

SAFETY-RELATED COMPONET WARNING!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

This appliance is classiﬁ ed as a CLASS 1 LASER product. This marking is located on the rear or bottom exterior.

CAUTION

Use of controls or adjustments or performance of procedures other than those speciﬁ ed herein may result in hazardous radiation exposure.

Notes on chip component replacement

• Never reuse a disconnected chip component.

• Notice that the minus side of a tantalum capacitor may be damaged by heat.

Flexible Circuit Board Repairing

• Keep the temperature of soldering iron around 270 °C during repairing.

• Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering or unsoldering.

About This Operating Instructions

• The instructions inthis Operating Instructions describe the controls on the remote. You can also use thecontrolsonthe unit if they have the same or similar names as those on the remote.

• The Control Menu items may vary depending on the area.

• “DVD” may b e used as a general term for a DVD VIDEO, D VD+RW /DVD+R, and DVDRW/DVD-R.

• Measurementsare expressed in feet (ft) for North American models.

• The default setting is und erlined.

About the S-AIR function

The system is compatible with the S-AIR function, which allows transmission of sound between S-AIR products wirelessly. The following S-AIR products can be used with the system:

UNLEADED SOLDER

Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

• Unleaded solder melts at a temperature about 40 °C higher than ordinary solder.

Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time.

Soldering irons using a temperature regulator should be set to

about 350 °C. Caution: The printed pattern (copper foil) may peel away if the

heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to ﬂ ow)

than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

• Surroundamplifier(supplied):You can enjoy surround speaker sound wirelessly.

• S-AIR receiver (optional): You can enjoy system sound in another room.

The S-AIR receiver can be purchased as an option (the S- A I R product lineup d iffers dependingon the area).

Notes or instructions for the surround amplifier or S-AIR receiver in this operating instructions refer only to when the surround amplifier or S-AIR receiver is used. Fordetailson theS-AIRfunction,see “Using an S-AIR Product” (page 81).

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Playable Discs

nocIscitsiretcarahCogolcsiDepyT

OEDIVDVD•OEDIVDVD

• DVD-R/DVD-RW in DVD VIDEO format or video mode

• DVD+R/DVD+RW in DVD VIDEO format

VR (Video Recording) mode

• DVD-R/DVD-RW in VR (Video Recording) mode (except for DVD-R DL)

DCoiduArepuS•DCoiduArepuS

•SuperVCD

• CD-R/CD-RW/CD-ROM in video CD format or Super VCD format

DCoiduA•DC

• CD-R/CD-RW in audio CD format

,and

niMOR-DC/WR-DC/R-DC•–DCATAD

Level 1/

/WR-DVD/R-DVD/MOR-DVD•–DVDATAD

DATA

CDf

ormat,containing MP3

files

,JPEGimagefiles2),and DivX video files conforming to ISO 9660 Level2, or Joliet (extendedformat)

DVD+R/DVD+RW in DATA DVD format, containing MP3

files

,JPEGimagefiles2),and DivX video files conforming to UDF (Universal Disk Format)

3)4)

)scsid0.2dna1.1.reV(DCOEDIV•DCOEDIV

MP3 (MPEG1 A udio Layer 3) is a standard format defined by ISO/MPEG which com presses audio d ata. MP3 files

must be in MPEG1 Audio Layer 3 format.

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image

standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA).)

DivX®is a video file compression technology, devel ope d by DivX, Inc.

DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for

Standardization).

“DVD-RW,” “DVD+RW,” “DVD+R ,”“DVD VIDEO,” and the “CD” logos are trademarks.

Example of discs that the system cannot play

The system cannot play the following discs:

• CD-ROM/CD-R/CD-RW oth er than those recorded in th e formats listed on page 5

•CD-ROMrecordedinPHOTOCDformat

• Data part of CD-Extra

• CD Graphics disc

• DVD Audio

• DA TA DVD that does not contain MP3 files, JPEG image files, or DivX video files

•DVD-RAM

Also, the system cannot play the following discs:

• A DVD VIDE O with a different region code (page 7)

• A disc that has a non-standard shape (e.g., card, heart)

• A disc with paper or sticke rs on it

• A disc that has the adhesive of cellophane tape or a sticker still left on it

Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW

Insome cases, CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW cannotbe played on this system due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. For more information,refer to the operating instructions for the recording device. Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA DVDs created i n Packet Write f ormat cannot be played.

Music discs encoded with copyright protection technologies

This product is designed to p lay back d iscs that conform to the Compact Disc (CD) standard. Recently, var io us music disc s encoded with copyright protection technologies are m arketed by some record companies. Please be aware that among those discs, there a re some that do not con form to the CD standard and may not be p la yable by this product.

Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. H ow ever, since the audio material side does not conform to the Compact Disc (CD ) standard, playba ck on this prod uct i s not guaranteed .

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

About Multi Session CD

• This system can play a Multi Session CD when an MP3 file is contained in the first session. Any subsequent MP 3 files recorded i n later sessions can also be played back.

• This system can play a Multi Session CD when a JPEG image file is contained in the first session. Any subsequen t JPEG image fil es recorded in lat er sessions c an also be played back.

• If MP3 files and JPEG image files in music CD format or video CD format are recorded in the first session, only the first se ssion will be played back .

Region code

Your system has a region code printed on the rear of the unit and will only play a DVD labeled with the same region code.

A DVD VIDEO labeled will also play on this system. If you try to play any other DVD VIDEO, the message [Playback prohibited by area limitations.] will appearon the TV screen. Dependingon theDVD VIDEO,no region code indicationmay be given even though playing the DVD VIDEO is prohibited by area restrictions.

Note about playback operations of a DVD or VIDEO CD

ALL

Some playback operations on a DVD or V IDEO CD may be intentionally set by software producers. Since this system will play a DVD or VIDEO CD according to the disc contents the software producers designed, some pl ayback features may not be available. Be sure t o read the op er at in g i nstructions supplied with the DVD or VIDEO CD.

Copyrights

This product inc orporates copy right protection t echnology that is protected by U.S. patents a nd other intellectual property right s. Use of this c opyright prote ct i on technology mus t be authorized by Macrovision,and is intendedfor home and other limitedviewing usesonly unless otherwise authorized by Macrovisio n. Reverse engineering or dis assembly is p rohibited.

This system incorporates with Dolby* Digital and Dolby Pro Logic (II) adaptive matrix surround decoder and th e DTS** Digital Sur round System.

* Manufactured under license from Dol by Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

**Manufactured under license from DTS, Inc.

“DTS” a nd “DTS Digital Surround” a r e registe red trademarks of DTS, Inc.

This system incorporates High-Definition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and Hig h-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

“BRAVIA” and are trademarks of Sony Corporation. “S-AIR” and its logo are tradem arks of Sony Corporation.

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Self-diagnosis Function

(When letters/numbers appear in the display)

When the self-diagnosis function is activated to prevent the system frommalfunctioning, a 5character service number (e.g., C 13 50) with a combination of a letter and 4 digits appears on theTV screenor frontpaneldisplay. Inthiscase, checkthefollowingtable.

C:13:50

When displaying the version number on the TV screen

When you turn on the system, the version number [VER.X.XX] (X is a number) may appear on the TV screen. A lt hough this is no t a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate.

VER.X.XX

First 3 characters of the service number

C 13 The disc is dirty.

C 31 Thedisc is not insertedcorrectly.

EXX (XX is a

number)

Cause and/or corrective action

Clean the disc with a soft cloth

(page 97).

Restartthe system,then re-insert

the disc correctly.

To prevent a malfunction, the system has performed the selfdiagnosis function. Contact your nearest Sony

dealer or local authorized Sony service facility and give the 5character service number. Example: E 61 10

108

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

TABLE OF CONTENTS

1. SERVICING NOTES ............................................. 9

2. GENERAL .................................................................. 11

3. DISASSEMBLY

3-1. Case ................................................................................ 24

3-2. POWER Board (DZ860W/DZ870W) ............................. 24

3-3. Front Panel Section (DZ860W/DZ870W) ...................... 25

3-4. POWER Board (DZ870KW/DZ870M) .......................... 25

3-5. Front Panel Section (DZ870KW/DZ870M) ................... 26

3-6. Back Panel Section (DZ870M) ....................................... 26

3-7. Back Panel Section (Except DZ870M) ........................... 27

3-8. DVD Mechanism Deck ................................................... 27

3-9. MAIN Board ................................................................... 28

3-10. IO-SCART Board (DZ860W), IO-COMPONENT Board (Except DZ860W),

SCORE Board (DZ870KW/DZ870M) ........................... 28

3-11. Tray ................................................................................. 29

3-12. Belt .................................................................................. 29

3-13. MS-203 Board ................................................................. 30

3-14. Base Unit ......................................................................... 30

3-15. Optical Pick-up ............................................................... 31

4. TEST MODE ............................................................ 32

5. ELECTRICAL ADJUSTMENTS ........................ 37

6. DIAGRAMS

6-1. Block Diagram –RF Section– ......................................... 41

6-2. Block Diagram –VIDEO Section– ................................. 42

6-3. Block Diagram –AUDIO Section– ................................. 43

6-4. Block Diagram –DSP Section– ....................................... 44

6-5. Block Diagram –AMP Section– ..................................... 45

6-6. Block Diagram –POWER Section– ................................ 46

6-7. Printed Wiring Board –MAIN Board (Side A)– ............. 47

6-8. Printed Wiring Board –MAIN Board (Side B)– ............. 48

6-9. Schematic Diagram –MAIN Board (1/9)– ...................... 49

6-10. Schematic Diagram –MAIN Board (2/9)– ...................... 50

6-11. Schematic Diagram –MAIN Board (3/9)– ...................... 51

6-12. Schematic Diagram –MAIN Board (4/9),

MS-203 Board– ............................................................... 52

6-13. Schematic Diagram –MAIN Board (5/9)– ...................... 53

6-14. Schematic Diagram –MAIN Board (6/9)– ...................... 54

6-15. Schematic Diagram –MAIN Board (7/9)– ...................... 55

6-16. Schematic Diagram –MAIN Board (8/9)– ...................... 56

6-17. Schematic Diagram –MAIN Board (9/9)– ...................... 57

6-18. Printed Wiring Board –IO-SCART Board (DZ860W)– .. 58

6-19. Schematic Diagram –IO-SCART Board (DZ860W)– ..... 59

6-20. Printed Wiring Board –IO-COMPONENT Board

(DZ870KW/DZ870M/DZ870W)– .................................. 60

6-21. Schematic Diagram –IO-COMPONENT Board

(DZ870KW/DZ870M/DZ870W)– .................................. 61

6-22. Printed Wiring Boards –JACK, P-SW Board– ............... 62

6-23. Schematic Diagram –JACK, P-SW Board– .................... 63

6-24. Printed Wiring Boards

–FL, MS-203, SPEAKER Board– .................................. 64

6-25. Schematic Diagram –FL, SPEAKER Board– ................. 65

6-26. Printed Wiring Board –DSP Board (Side A)– ................. 66

6-27. Printed Wiring Board –DSP Board (Side B)– ................. 67

6-28. Schematic Diagram –DSP Board– .................................. 68

6-29. Printed Wiring Board –S-AIR-INC Board (Side A)

(DZ860W/DZ870KW/DZ870W)– ................................. 69

6-30. Printed Wiring Board –S-AIR-INC Board (Side B)

(DZ860W/DZ870KW/DZ870W)– ................................. 70

6-31. Schematic Diagram –S-AIR-INC Board

(DZ860W/DZ870KW/DZ870W)– ................................. 71

6-32. Printed Wiring Board –S-AIR-CON Board (DZ870M)– .. 72

6-33. Schematic Diagram –S-AIR-CON Board (DZ870M)– ..... 73

6-34. Printed Wiring Board –SERIPARA (DSR) Board– ........ 74

6-35. Schematic Diagram –SERIPARA (DSR) Board– ........... 75

6-36. Printed Wiring Board –SCORE Board

(DZ870KW/DZ870M)– .................................................. 76

6-37. Schematic Diagram –SCORE Board

(DZ870KW/DZ870M)– .................................................. 77

6-38. Printed Wiring Board –POWER Board– ........................ 78

6-39. Schematic Diagram –POWER Board– ........................... 79

7. EXPLODED VIEWS

7-1. Overall Section ............................................................... 97

7-2. Front Panel Section ......................................................... 98

7-3. Chassis Section ............................................................... 99

7-4. DVD Mechanism Deck Section (CDM85-DVBU102) .. 100

8. ELECTRICAL PARTS LIST .............................. 101

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

SECTION 1

SERVICING NOTES

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The ﬂ exible board is easily damaged and should be handled with care.

NOTES ON LASER DIODE EMISSION CHECK

The laser beam on this model is concentrated so as to be focused on the disc reﬂ ective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.

LASER DIODE AND FOCUS SEARCH

1. Open the case and turn POWER on with no disc inserted.

2. Conﬁ rm that the following operation is performed while observing the objecting lens from the clearance of DVD mechanism deck.

1) Conﬁ rm that laser beam is spread.

2) Up and down motion of the objective lens. (2 times)

DISC TRAY LOCK

The disc tray lock function for the antitheft of an demonstration disc in the store is equipped.

Setting Procedure :

1. Press the [

2. Press the [FUNCTION] button to set DVD function.

3. Insert a disc.

4. Press the [x] button and the [A] button simultaneously for ﬁ ve seconds.

5. The message “LOCKED” is displayed and the tray is locked.

Releasing Procedure :

1. Press the [x] button and the [A] button simultaneously for ﬁ ve seconds again.

2. The message “UNLOCKED” is displayed and the tray is unlocked.

Note: When “LOCKED” is displayed, the tray lock is not released by

turning power on/off with the [?/1] button.

On cleaning discs, disc/lens cleaners

• Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.

IMPORTANT NOTICE

Caution: This system is capable of holding a still video image or on-screen display image on your television screen indeﬁ nitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Projection televisions are especially susceptible to this.

] button to turn the set on.

?/1

How to open the disc table when power switch turns off

Insert a tapering driver into the aperture of the unit bottom, and slide it in the direction of the arrow.

Peel off the seal and so the lever is moved in the direction of the arrow with the thin rod.

seal

tray

Precaution when installing a new OP unit/ Precaution before unsoldering the static electricity prevention solder bridge

When installing a new OP unit, be sure to connect the ﬂ exible printed circuit board ﬁ rst of all before removing the static electricity prevention solder bridge by unsoldering. Remove the static electricity prevention solder bridge by unsoldering after the ﬂ exible printed circuit board has already been connected. (Do not remove nor unsolder the solder bridge as long as the OP unit is kept standalone.)

Attention when transported

Use this mode when returning the set to the customer after repair.

Procedure:

1. Press the [

2. Press the [FUNCTION] button to set the function “DVD”.

3. Remove all discs, and then press two buttons [H] and [ simultaneously.

4. After a message “MECHA LOCK” is displayed on the ﬂ uorescent indicator tube, pull out the AC plug.

5. To exit from this mode, press the [ on.

] button to turn the set on.

?/1

] button to turn the set

?/1

]

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Radiation Sheet

When peeling off the heat radiation sheet, try always to put it on be former position.

POWER board

radiation sheet

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

SECTION 2

GENERAL

This section is extracted from instruction manual.

Index to Parts and Control

(DZ860W)

For more information, ref er to the pa ges indicated in parentheses.

Front panel

" / (on/standby) (29, 95) # " (open/close) (38) $ Front p anel display (116) % Play operation buttons (38) & (remote sensor) (9 ) ' FUNCTION (32)

( VOLUME control (38) ) PHONES jack (38) * AUDIO IN/A.CAL MIC jack (22, 29, 88) + (USB)port(71) , Disc tray (38)

Rear panel

SPEAKER

FRONTR FRONT L

SPEAKER

CENTER SUBWOOFER

" SPEAKER jacks (20) # EZW-RT10 slot (25) $ COAXIAL 75Ω FM jack (24) % AM terminal (24) & EURO AV 5 OUTPUT (TO TV) jack ( 2 1)

DIGITAL IN

COAXIAL OPTICAL

TUOIMDHVT

ANTENNA

COAXIAL 75

EURO AV

OUTPUT(TO TV)

DMPORT

DC5V

0.7A MAX

EZW-RT10

AUDIO IN LR

LINE

' LINE (AUDIO IN R/L) jacks (22) ( DMPORT (DIGITAL MEDIA PO RT) jack

(22, 80)

) HDMI OUT jack (21) * TV (DIGITAL IN COAXIAL/OPTICAL)

jacks (21)

Additional Information

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Front panel display

About the indications in the front panel display

" Playing status # Flashes when the sleep timer is set.

(91)

$ Displays system’ s status such as

chapter, title, or track number, time information, radio frequency, playing status, decoding mode, etc.

% Lights up when a station is received.

(Radio only) (64)

& Stereo/Monaural effect (Radio only)

(65)

' Lights up when the S-AIR transceiveris

inserted in the unit and the system transmits the sound. (81)

( Lights up when the HD MI OUT jack is

correctly connected to HDCP (Highbandwidth Digital Content Protection) compliant device with HDMI or DVI (Digital Visual Interface) input. (21)

) Current surround format (Except for

JPEG image file)

* Lights up when an NTSC disc is

loaded.

+ Lights up during USB recording/

copying. (77)

, Lights up when Super Audio CD/CD is

loaded. (41)

116

Remote control

ANALOG FE (89) ANGLE  (39) AUDIO F (37, 40) CLEAR FT (44, 56,65) D.TUNING XT (65) DIGITAL XB (89) DIMMER FE (92) DISPLAY RI (66, 76, 92) DVD M ENU  (46) DVD TOP MENU XM (46) DYNAMIC BASS XB (91) ENTER*  (26, 29, 41, 44, 64,

87) FUNCTION +/–  (32, 38) MENU XL (89) MUTINGXH (38)

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Z–NM–A

NIGHT X (91) ONE-TOUCH PLAY FH (69) PICTURE NAVI RH (49, 73) PRESET +/–  (65) PROG +/–  (89) S-AIR MODE RK (81) SLEEP FG (91) SOUND MODE +/–  (36) SUBTITLE XT (40) SYSTEM MENU  (26, 32, 85,

91, 92) THEATRE RL (68) TOOLS  (89) TUNING +/– XK (64) TV RT (89) TV VOL +/– RB (89) VOLUME +/– RB (38)

SNOITPIRCSEDNOTTUBREDROLACITEBAHPLA

Number buttons  (42, 64, 89) Colored buttons FB (89) </ (on/s

tandby)  (26, 29, TV </ (on/standby) RM (89) $/9/Y/D/ RG (26, 29, 41, 44,

64, 87)

XE (38)

/  (38) N/. XK (38)

)(play)  (38) Y (stop) XG (38) 9 (pause) XI (38)

87)

0 RETURN RE (42, 89)

-/--  (89)

 FT (89)

U/  (89) D/$  (89)

REPLAY/ADVANCE

/ XK (38)

DISPLAY** XL (29, 41, 44,

/ RI (89)

XM (89)

38)

118

* The ENTER button has the

same function as the button. When you operate the TV, the ENTER button is used for selectinga channel,and the button is used for selecting menu items (page 89).

**This button is available for

the “DVD,” “USB,” or “DMPORT” function. Depending on the DIGITAL MED IA PORT adapter, this buttonmay not work.

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Index to Parts and Control

(DZ870KW)

For more information, ref er to the pa ges indicated in parentheses.

Front panel

" / (on/standby) (29, 97) # " (open/close) (38) $ Front panel display (118) % Play operation buttons (38) & (remote sensor) (8 ) ' FUNCTION (32)

( VOLUME control (38) ) MIC2 jack (89) * AUDIO IN/MIC1/A.CAL MIC jack (22, 29,

86)

+ (USB)port(70) , Disc tray (38)

Rear panel

SPEAKER

FRONTR FRONT L

SPEAKER

CENTER SUBWOOFER

" SPEAKER jacks (19) # EZW-RT10 slot (25) $ COAXIAL 75Ω FM jack (24) % AM terminal (24) & SAT/CABLE (AUDIO IN R/L) jacks (22) ' TV (AUDIO IN R/L) jacks (20)

DIGITAL IN

COAXIAL OPTICAL

EZW-RT10

DC5V

TUOIMDHVT

DMPORT

0.7A MAX

B/CBPR/CR

COMPONENTVIDEO OUT

VIDEO OUT TV

AUDIO IN

( VIDEO OUT jack (20) ) COMPONENT VIDEO OUT jacks (20) * DMPORT (DIGITAL MEDIA PO RT) jack

(22, 79)

+ HDMI OUT jack (20) , TV (DIGITAL IN COAXIAL/OPTICAL)

jacks (20)

ANTENNA

COAXIAL 75

AUDIO IN LR

SAT/CABLE

Additional Information

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Front panel display

About the indications in the front panel display

" Lights up when the karaoke mode is

on. (89)

# Flashes when the sleep timer is set.

(93)

$ Displays system’ s status such as

chapter, title, or track number, time information, radio frequency, playing status, decoding mode, etc.

% Lights up when a station is received.

(Radio only) (64)

& Stereo/Monaural effect (Radio only)

(65)

' Lights up when the S-AIR transceiveris

inserted in the unit and the system transmits the sound. (80)

( Lights up when the HD MI OUT jack is

correctly connected to HDCP (Highbandwidth Digital Content Protection) compliant device with HDMI or DVI (Digital Visual Interface) input. (20)

) Current surround format (Except for

JPEG image file)

* Lights up when the color system is set

toNTSC. (Asian, Australian, and Middle Eastern models only)

+ Lights up during USB recording/

copying. (76)

, Lights up when Super Audio CD/CD is

loaded. (41)

- Playing status

118

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Remote control

Z–NM–A

ANALOG FL (87) ANGLE  (39) AUDIO FH (37, 40) CLEAR FK (43, 56,65) D.TUNING XH (65) DIGITAL XG (87) DISPLAY RM (66, 75, 94) DVD MENU  (46) DVD TOP MENU FG (46) DYNAMIC BASS XG (93) ECHO RB (90) ENTER*  (26, 29, 41, 43, 64,

85) FUNCTION +/–  (32, 38) KARAOKE PON  (91) KEYCON #/ MENU FE (87) MIC VOL +/– RT (90) MUTINGF (38)

 XM (91)

NIGHT XE (93) ONE-TOUCH PLAY S (68) PICTURE NAVI RK (48, 72) PRESET +/–  (65) PROG +/–  (87) SCORE XL (92) SLEEP X (93) SOUND MODE +/– FM (36) SUBTITLE XH (40) SYSTEM MENU  (26, 33, 80,

93, 94) THEATRE XB (67) TOOLS  (87) TUNING +/– FT (64) TV RG (87) TV VOL +/– RE (87) VOLUME +/– RE (38)

SNOITPIRCSEDNOTTUBREDROLACITEBAHPLA

Number buttons RL (42, 64, 87) Colored buttons FI (87) </ (on/standby)  (26, 29, 38) TV </ (on/standby) XT (87) $/9/Y/D/

64, 85)

XI (38)

/  (38) N/. FT (38)

/ FT (38)

)(p Y (stop) XK (38) 9 (pause) FB (38)

85)

0 RETURN RH (42, 87)

-/--  (87) / RM (87)

 FK (87)

U/  (87) D/$  (87)

RI (26, 29, 41, 43,

REPLAY/ADVANCE

)  (38)

lay

DISPLAY** FE (29, 41, 43,

FG (87)

120

* The ENTER button has the

same function as the button. When you operate the TV, the ENTER button is used for selectinga channel,and the button is used for selectingmenu items (page 87).

**This button is available for

the “DVD,” “USB,” or “DMPORT” function. Depending on the DIGITAL MED IA PORT adapter, this buttonmay not work.

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Index to Parts and Control

(DZ870M)

For more information, ref er to the pa ges indicated in parentheses.

Front panel

" / (on/standby) (26, 96) # " (open/close) (35) $ Front panel display (116) % Play operation buttons (35) & (remote sensor) (9 ) ' FUNCTION (29)

( VOLUME control (35) ) MIC2 jack (88) * AUDIO IN/MIC1/A.CAL MIC jack (22, 26,

85)

+ (USB) port (68) , Disc tray (35)

Rear panel

SPEAKER

FRONTR FRONTL SUR R SUR L

SPEAKER

CENTER SUBWOOFER

" SPEAKER jacks (19) # EZW-T100 slot (22) $ COAXIAL 75Ω FM jack (24) % AM terminal (24) & SAT/CABLE (AUDIO IN R/L) jacks (22) ' TV ( AUDIO IN R/L) jack s (20) ( VIDEO OUT jack (20)

DIGITAL IN

COAXIAL OPTICAL

HDMI OUT

Screws*

EZW-T100

DC5V

DMPORT

0.7A MAX

B/CBPR/CR

COMPONENTVIDEO OUT

VIDEO OUT TV

AUDIO IN

) COMPONENT VIDEO OUT jacks (20) * DMPORT (DIGITAL MEDIA PO RT) jack

(22, 77)

+ HDMI OUT jack (20) , TV (DIGITAL IN COAXIAL/OPTICAL)

jacks (20)

* CAUTION

Please do not remove the screws before installing the EZW-T100.

AUDIO IN LR

SAT/CABLE

ANTENNA

COAXIAL 75

Additional Information

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Front panel display

About the indications in the front panel display

" Lights up when the karaoke mode is

on. (88)

# Flashes when the sleep timer is set.

(92)

$ Displays system’ s status such as

chapter, title, or track number, time information, radio frequency, playing status,decodingmode,etc.

% Lights up when a station is received.

(Radio only) (61)

& Stereo/Monaural effect (Radio only)

(62)

' Lights up when the S-AIR transmitter

(not supplied) is inserted in the unit and the system transmits the sound. (78)

( Lights up when the HD MI OUT jack is

correctly connected to HDCP (Highbandwidth Digital Content Protection) compliant device with HDMI or DVI (Digital Visual Interface) input. (20)

) Current surround format (Except for

JPEG image file)

* Lights up when an NTSC disc is

loaded.

+ Lights up during USB recording/

copying. (74)

, Lights up when Super Audio CD/CD is

loaded. (38)

- Playing status

116

Remote control

ANALOG FL (86) ANGLE  (36) AUDIO FH (34, 37) CLEAR FK (40, 53, 62) D.TUNING XH (62) DIGITAL XG (86) DISPLAY RM (63, 73, 93) DVD MENU  (43) DVD TOP MENU FG (43) DYNAMIC BASS XG (92) ECHO RB (89) ENTER*  (25, 26, 38, 40, 61,

84) FUNCTION +/–  (29, 35) KARAOKE PON  (90) KEYCON #/ MENU FE (86) MIC VOL +/– RT (89) MUTING F (35)

 XM (90)

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Z–NM–A

NIGHT XE (92) ONE-TOUCH PLAY S (66) PICTURE NAVI RK (46, 70) PRESET +/–  (62) PROG +/–  (86) SCORE XL (91) SLEEP X (92) SOUND MODE +/– FM (33) SUBTITLE XH (36) SYSTEM MENU  (25, 30, 78,

92, 93) THEATRE XB (65) TOOLS  (86) TUNING +/– FT (61) TV RG (86) TV VOL +/– RE (86) VOLUME +/ – RE (35)

SNOITPIRCSEDNOTTUBREDROLACITEBAHPLA

Number buttons RL (39, 61, 86) Colored buttons FI (86) </ (on/standby) (25, 26, 35) TV </ (on/standby) XT (86) $/9/Y/D/ RI (25, 26, 38, 40,

61, 84)

XI (35)

/  (35) N/. FT (35

)(p Y (stop) XK (35) 9 (pause) FB (35)

84)

0 RETURNRH (39, 86)

-/--  (86)

 FK (86)

U/  (86) D/$  (86)

REPLAY/ADVANCE

)

/ FT (35)

lay)  (35)

DISPLAY** FE (26, 38, 40,

/ RM (86)

FG (86)

Additional Information

* The ENTER button has the

same function as the button. When you operate the TV, the ENTER button is used for selectinga channel, and the button is used for selectingmenu items (page 86).

**This button is available for

the “DVD,” “USB,” or “DMPORT” function. Depending on the DIGITAL MEDIA PORT adapter, this buttonmay not work.

117

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Index to Parts and Control

(DZ870W)

For more infor mation, refer t o the pages indicated in parentheses.

Front panel

" / (on/standby) (30, 95 ) # " (open/close) (39) $ Front panel display (117) % Play operation buttons (39) & (remote sensor) (9) ' FUNCTION (33)

( VOLUME control (39) ) PHONES jack (39) * AUDIO IN/ A.CAL MIC jack (23, 30, 88) + (USB) port ( 71) , Disc tray (39)

Additional Information

Rear panel

SPEAKER

FRONTR FRONT L

SPEAKER

CENTER SUBWOOFER

" SPEAKER jacks (20) # EZW-RT10 slot (26) $ COAXIAL 75Ω FM jack (25) % AM terminal (25) & SAT/CABLE (AUDIO IN R/L) jacks (23) ' TV (AUDI O IN R/L) jacks (21)

DIGITAL IN

COAXIAL OPTICAL

EZW-RT10

DC5V

TUOIMDHVT

DMPORT

0.7A MAX

B/CBPR/CR

COMPONENTVIDEO OUT

VIDEO OUT TV

AUDIO IN

( VIDEO OUT jack (21) ) COMPONENT VIDEO OUT jacks (21) * DMPORT (DI G ITAL MEDIA PORT) jack

(23, 80)

+ HDMI OUT jack (21) , TV (DIGITAL IN COAXIAL/OPTICAL)

jacks (21)

ANTENNA

COAXIAL 75

AUDIO IN LR

SAT/CABLE

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Front panel display

About the indications in the front panel display

" Playing status # Flashes when the sleep timer is set.

(91)

$ Displays system’s status such as

chapter, title, or track number, time information, radio frequency, playing status, decoding mode, etc.

% Lights up when a station is received.

(Radio only) (65)

& Stereo/Monaural effect (Radio only)

(66)

' Lights up whenthe S-AIR transceiver is

inserted in the unit and the system transmits the sound. (81)

( Lights up when the HDM I OUT jack is

correctly connected to HDCP (Highbandwidth Digital Content Protection) compliant device with HDM I or DVI (Digital Visual Interface) input. (21)

) Current surround format (Except for

JPEG image file)

* Lights up when the color system is set

toNTSC. (Asian, Australian, and Middle Eastern models only)

+ Lights up dur in g USB recor d in g /

copying. (77)

, Lights up when Super Audio CD/CD is

loaded. (42)

Additional Information

117

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Remote control

Z–NM–A

ANALOG FE (89) ANGLE  (40) AUDIO F (38, 41) CLEAR FT (45, 57, 66) D.TUNING XT (66) DIGITAL XB (89) DIMMER FE (92) DISPLAY RI (67, 76, 92) DVD MENU  (47) DVD TOP MENU XM (47) DYNAMIC BASS XB (91) ENTER*  (27, 30, 42, 45, 65,

87) FUNCTION +/–  (33, 39) MENU XL (89) MUTING XH (39)

NIGHT X (91) ONE-TOUCH PLAY FH (69) PICTURE NAVI RH (50, 73) PRESET +/–  (66) PROG +/–  (89) S-AIR MODE RK (81) SLEEP FG (91) SOUND MODE +/–  (37) SUBTITLE XT (41) SYSTEM MENU  (27, 34, 85,

91, 92) THEATRE RL (68) TOOLS  (89) TUNING +/– XK (65) TV RT (89) TV VOL +/– RB (89) VOLUME +/– RB (39)

SNOITPIRCSEDNOTTUBREDROLACITEBAHPLA

Number buttons  (43, 65, 89) Colored buttons FB (89) </ (

on/standby)  (27, 30, TV </ (on/standby) RM (89) $/9/Y/D/ RG (27, 30, 42, 45,

65, 87)

XE (39)

/  (39) N/. XK (39)

)(play)  (39) Y (stop) XG (39) 9 (pause) XI (39)

87)

0 RETURNRE (43, 89)

-/--  (89)

 FT (89)

U/  (89) D/$  (89)

REPLAY/ADVANCE

/ XK (39)

DISPLAY** XL (30, 42, 45,

/ RI (89)

XM (89)

39)

Additional Information

* The ENTER button has the

same function as the button. When you operate the TV, the ENTER button is used for selectinga channel, and the button is used for selectingmenu items (page 89).

**This button is available for

the “DVD,” “USB,” or “DMPORT” function. Depending on the DIGITAL MEDIA PORT adapter, this buttonmay not work.

119

DISASSEMBLY

• This set can be disassembled in the order shown below.

SET

3-1. CASE (Page 24)

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

SECTION 3

3-2. POWER BOARD

(DZ860W/DZ870W)

(Page 24)

3-3. FRONT PANEL SECTION (DZ860W/DZ870W) (Page 25)

3-8. DVD MECHANISM DECK (Page 27)

3-11. TRAY (Page 29)

3-4. POWER BOARD

(DZ870KW/DZ870M)

(Page 25)

3-5. FRONT PANEL SECTION (DZ870KW/DZ870M) (Page 26)

3-6. BACK PANEL SECTION (DZ870M) (Page 26)

3-9. MAIN BOARD (Page 28)

3-10. IO-SCART BOARD (DZ860W), IO-COMPONENT BOARD (EXCEPT DZ860W), SCORE BOARD (DZ870KW/DZ870M) (Page 28)

3-7. BACK PANEL SECTION (EXCEPT DZ870M) (Page 27)

3-12. BELT (Page 29)

3-13. MS-203 BOARD (Page 30)

3-14. BASE UNIT (Page 30)

3-15. OPTICAL PICK-UP (Page 31)

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

Note: Follow the disassembly procedure in the numerical order given.

3-1. CASE

 case

 five screws

(BV/RING)

 two screws (case 3 TP2)

 two screws (case 3 TP2)

3-2. POWER BOARD (DZ860W/DZ870W)

 seven screws (+PWH 3 × 8)

 POWER board

 CN906 (13P)

 CN908 (2P)

 CN904 (4P)

 CN901 (2P)

 two screws

(+PWH 3 × 8)

 shield plate

 cover (USB)

 two claws

3-3. FRONT PANEL SECTION (DZ860W/DZ870W)

 CN411 (5P)

 wire (flat type)(19 core)

(CN502)

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

 CN2101 (5P)

 two screws

(+BV3 (3-CR))

RB claw

 loading panel

RT front panel section

RB claw

 five screws

(+BV3 (3-CR))

 CN3001 (4P)

 label





tray

3-4. POWER BOARD (DZ870KW/DZ870M)

 nine screws (+PWH 3 × 8)

 CN906 (13P)

 CN908 (2P)

 CN904 (4P)

 CN901 (2P)

 POWER board

 cover (USB)

 two claws

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

3-5. FRONT PANEL SECTION (DZ870KW/DZ870M)

 claw

 loading panel

 wire (flat type)(19 core)

(CN502)

 two screws (+BV3 (3-CR))

RB front panel section

 CN411 (5P)

 claw

 five screws

(+BV3 (3-CR))

 CN2101 (5P)

 label



3-6. BACK PANEL SECTION (DZ870M)

RB back panel section

 wire (flat type) (11 core)

(CN414)

 CN110 (4P)

 three screws

(+BVTP 3 × 8)



 screw

(+BVTP 3 × 8)

tray

 screw (+B 3 × 6)

 two screws (+BVTP 3 × 8)

 three screws (+BVTP 3 × 8)

 screw (+BVTP 3 × 8)

 CN3000 (2P)

 wire (flat type) (17 core)

(CN651)

3-7. BACK PANEL SECTION (EXCEPT DZ870M)

RB back panel section

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

 wire (flat type) (11 core) (CN414) (DZ860W) wire (flat type) (9 core) (CN419) (DZ870KW/DZ870W)

 CN804 (4P)

 three screws

(+BVTP 3 × 8)

 screw (+BVTP 3 × 8)

 wire (flat type) (17 core) (CN651)

 screw (+B 3 × 6)

 two screws (+BVTP 3 × 8)

 three screws (+BVTP 3 × 8)

 screw (+BVTP 3 × 8)

 CN3000 (2P)

3-8. DVD MECHANISM DECK

 screw (+BV3 (3-CR))

 two screws (+BV3 (3-CR))

 DVD mechanism deck

 screw

(+BV3 (3-CR))

 cover (CDM-DSR)

 screw

(+BV3 (3-CR))

 screw

(+BV3 (3-CR))

 wire (flat type)(5 core) (CN1202)

 CN1201 (6P)

 wire (flat type)(24 core)

(CN1101)

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

3-9. MAIN BOARD

 wire (flat type) (7 core) (CN701)

 wire (flat type) (13 core) (CN604)

(DZ870M) wire (flat type) (11 core) (CN605) (DZ860W/DZ870KW) wire (flat type) (9 core) (CN606) (DZ870W)

 wire (flat type) (7 core) (CN601)

 SERIPARA board

RK six screws

(+BV3 (3-CR))

 screw (+BV3 (3-CR))

RB screw (+BV3 (3-CR))

 CN700 (3P)

lug

(DZ870KW/DZ870M) wire (flat type) (5 core) (CN702) (DZ860W/DZ870W)

 wire (flat type) (17 core) (CN4302) (DZ870KW/DZ870M/DZ870W) wire (flat type) (19 core) (CN4301) (DZ860W)

RG screw

(+BVTP 3 × 12)

RE two screws (+BV3 (3-CR))

RH heat sink section

 two screws

(+BV3 (3-CR))

 SPEAKER board

 CN114 (8P) (DZ870M)

CN115 (4P) (DZ860W/DZ870KW/ DZ870W)

RT DSP board

RI two radiation sheet

RL MAIN board

3-10. IO-SCART BOARD (DZ860W), IO-COMPONENT BOARD (EXCEPT DZ860W), SCORE BOARD (DZ870KW/DZ870W)

 SCORE board (DZ870KW/DZ870M)

 two screws

(+BV3 (3-CR))

 IO-SCART board (DZ860W) IO-COMPONENT board (DZ870KW/DZ870M/DZ870W)

3-11. TRAY

 Move the chuck cam in the direction of the arrow.



HCD-DZ860W/DZ870KW/DZ870M/DZ870W

bottom side

 two claws

3-12. BELT



chuck cam





 tray

belt

 two claws

HCD-DZ860W/DZ870KW/DZ870M/DZ870W

3-13. MS-203 BOARD



MS-203 board



DC motor

 three claws

 screw

(M 1.7 × 2.5)

3-14. BASE UNIT



chuck cam

 two claws

 two claws

 base unit

+ 96 hidden pages