Sony DSC-TX55 Users guide [zh, pt]

4-294-603-81(1)

DSC-TX55

Digital Still Camera / Instruction Manual GB

Cámara fotografía digital / Manual de instrucciones ES

Câmera fotográfica digital / Manual de instruções PT

CT

CS

KR

©2011 Sony Corporation Printed in Japan

DSC-TX55

English

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the
space provided below. Refer to these numbers whenever you call your Sony dealer
regarding this product.

Model No. DSC-TX55
Serial No. ______________________________
Model No. AC-UB10/UB10B
Serial No. ______________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or
moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the
proper configuration for the power outlet.

CAUTION

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical
burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as
hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery
terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a
car parked in the sun.

GB

• Do not incinerate or dispose of in fire.

2

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Connect the AC Adaptor to the nearest wall outlet (wall socket).
If some trouble occurs while using the AC Adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet (wall socket).

The power cord (mains lead), if supplied, is designed specifically for use with this camera
only, and should not be used with other electrical equipment.

For Customers in the U.S.A. and Canada

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used
rechargeable batteries to the collection and recycling location nearest
you.

For more information regarding recycling of rechargeable batteries,
call toll free
1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

GB

For Customers in the U.S.A.

UL is an internationally recognized safety organization.
The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center
1-800-222-SONY (7669).

The number below is for the FCC related matters only.

GB

3

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY
Model No.: DSC-TX55
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.

San Diego, CA 92127 U.S.A.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

GB

4

For Customers in Europe

[ Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or
guarantee matters please refer to the addresses given in separate service or guarantee
documents.

This product has been tested and found compliant with the limits set out in the EMC
Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound
of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),
restart the application or disconnect and connect the communication cable (USB, etc.)
again.

[ Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate
collection systems)

please contact your local Civic Office, your household waste disposal service or the shop
where you purchased the product.

This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product,

GB

GB

5

[ Disposal of waste batteries (applicable in the European Union

and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery
provided with this product shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a
chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are
added if the battery contains more than 0.0005% mercury or 0.004% lead.

potentially negative consequences for the environment and human health which could
otherwise be caused by inappropriate waste handling of the battery. The recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery will be treated properly, hand over
the product at end-of-life to the applicable collection point for the recycling of electrical
and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the
product safely.
Hand the battery over to the applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact
your local Civic Office, your household waste disposal service or the shop where you
purchased the product.

By ensuring these batteries are disposed of correctly, you will help prevent

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the
supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or
mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never use the plug without the fuse cover. If you
should lose the fuse cover, please contact your nearest Sony service station.

GB

6

Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM

For details on advanced operations, please read “Cyber-shot User Guide”
(HTML) on the CD-ROM (supplied) using a computer.

Insert the CD-ROM into the CD-ROM drive.

For Windows users:

1 Click [User Guide] t [Install].
2 Start “User Guide” from the shortcut on the desktop.

For Macintosh users:

1 Select the [User Guide] folder and copy [eng] folder stored in [User Guide]

folder to your computer.

2 After copying is complete, double-click “index.html” in [eng] folder.

Checking the supplied items

• Camera (1)

• Rechargeable battery pack NP-BN (1)

(This rechargeable battery pack cannot be used with Cyber-shot that are
supplied with the NP-BN1 battery pack.)

• Multi-use terminal USB cable (1)

• AC Adaptor AC-UB10/UB10B (1)

• Power cord (mains lead) (not supplied in the USA and Canada) (1)

• Paint pen (1)

• Wrist strap (1)

• Tripod adaptor (1)

•CD-ROM (1)

– Cyber-shot application software
– “Cyber-shot User Guide”

• Instruction Manual (this manual) (1)

GB

GB

7

Identifying parts

A Flash
B Microphone
C Lens cover
D Speaker
E Lens
F Self-timer lamp/Smile Shutter

lamp/AF illuminator

G Screen/Touch panel
H ON/OFF (Power) button
I Power/Charge lamp
J Shutter button
K W/T (zoom) lever
L Hook for wrist strap
M Thread groove
N Battery insertion slot
O Battery eject lever
P Multi connector (Type3b)
Q Battery/Memory card cover
R Memory card slot
S Access lamp
T HDMI connector

GB

8

Inserting the battery pack

Battery eject lever

Open the cover.

1

Insert the battery pack.

2

• While sliding the battery eject lever, insert the battery pack as
illustrated. Make sure that the battery eject lever locks after insertion.

• Closing the cover with the battery inserted incorrectly may damage the
camera.

Charging the battery pack

For customers in the USA, Canada

GB

Power cord (Mains
lead)

For customers in countries/regions
other than the USA and Canada

Power/Charge lamp
Lit: Charging
Off: Charging finished
Flashing:

Charging error
Charging paused due to
overheating

GB

9

Connect the camera to the AC Adaptor (supplied),

1

using the multi-use terminal USB cable (supplied).

Connect the AC Adaptor to the wall outlet (wall socket).

2

The Power/Charge lamp lights orange, and charging starts.

• Turn off the camera while charging the battery.

• You can charge the battery pack even when it is partially charged.

• When the Power/Charge lamp flashes and charging is not finished,
remove and re-insert the battery pack.

Notes

• If the Power/Charge lamp on the camera flashes when the AC Adaptor is
connected to the wall outlet (wall socket), this indicates that charging is
temporarily stopped because the temperature is outside the recommended range.
When the temperature gets back within the appropriate range, the charging
resumes. We recommend charging the battery pack in an ambient temperature of
between 10°C to 30°C (50ºF to 86ºF).

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If
malfunctions occur while using the AC Adaptor, disconnect the plug from the wall
outlet (wall socket) immediately to disconnect from the power source.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
socket).

• Be sure to use only genuine Sony brand battery packs, multi-use terminal USB
cable (supplied) and AC Adaptor (supplied).

• BC-TRN2 battery charger (sold separately) is able to quick-charge the NP-BN
rechargeable battery pack supplied with this model. BC-TRN battery charger (sold
separately) is not able to quick-charge the NP-BN rechargeable battery pack
supplied with this model.

x

Charging time

The charging time is approximately 140 min. using the AC Adaptor
(supplied).

Note

• The above charging time applies when charging a fully depleted battery pack at a
temperature of 25°C (77°F). Charging may take longer depending on conditions of
use and circumstances.

10

GB

x

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using
a multi-use terminal USB cable.

Note

• Note the following points when charging via a computer:

– If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period
of time.

– Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer
and the camera. The camera may cause a malfunction. Before turning on/off, or
restarting the computer or waking the computer from sleep mode, disconnect the
camera and the computer.

– No guarantees are made for charging using a custom-built computer or a

modified computer.

x

Battery life and number of images can be recorded
and played back

Battery life Number of images

Shooting (still images) Approx. 125 min. Approx. 250 images
Viewing (still images) Approx. 180 min. Approx. 3600 images
Shooting (movies) Approx. 60 min. —

GB

Notes

• The above number of images applies when the battery pack is fully charged. The

number of images may decrease depending on the conditions of use.

• The number of images that can be recorded is for shooting under the following

conditions:
– Using Sony microSD memory card (Class 4 or faster) (sold separately)
– The battery pack is used at an ambient temperature of 25°C (77°F).

GB

11

• The number for “Shooting (still images)” is based on the CIPA standard, and is for
shooting under the following conditions:
(CIPA: Camera & Imaging Products Association)
– [Panel Brightness] is set to [3].
– Shooting once every 30 seconds.
– The zoom is switched alternately between the W and T ends.
– The flash strobes once every two times.
– The power turns on and off once every ten times.

• The battery life for movies applies shooting under the following conditions:
– Movie quality: AVC HD HQ
– When continuous shooting ends because of set limits (page 22), touch

(Movie button) again and continue shooting. Shooting functions such as the

zoom do not operate.

x

Supplying power

The camera can be supplied with power from the wall outlet (wall socket) by
connecting to the AC Adaptor, using the multi-use terminal USB cable.
You can import images to a computer without worrying about draining the
battery pack by connecting the camera to a computer using the multi-use
terminal USB cable.
In addition, you can use the AC Adaptor AC-UD10 (sold separately) for
shooting to supply power when shooting.

Notes

• Power cannot be supplied when the battery pack is not inserted in the camera.

• When the camera is connected directly to a computer or to a power outlet using the
supplied AC Adaptor AC-UB10/UB10B, power supply is available only in
playback mode. If the camera is in shooting mode or while you are changing the
settings of the camera, power is not supplied even if you make a USB connection
using the multi-use terminal USB cable.

• If you connect the camera and a computer using the multi-use terminal USB cable
while the camera is in playback mode, the display on the camera will change from
the playback screen to the USB connection screen. Touch (Playback) to
switch to the playback screen.

12

GB

Inserting a memory card (sold separately)

Make sure that the correct

side is facing up.

Open the cover.

1

Insert the memory card (sold separately).

2

“Memory Stick Micro” (M2) media: Insert the memory card until it clicks
into place as shown (A).
microSD memory card: Insert the memory card until it clicks into place as
shown (B).

• If the memory card is not inserted straight and in the correct direction,
the camera cannot read the memory card and (Internal Memory) is
displayed.

• Only one memory card can be inserted.

Close the cover.

3

“Memory
Stick Micro”
media

microSD
memory card

GB

GB

13

x

Memory cards that can be used

Memory card For still images For movies

Memory Stick Micro a —

A

Memory Stick Micro (Mark2) aa
microSD memory card aa (Class 4 or faster)

B

microSDHC memory card aa (Class 4 or faster)

• In this manual, products in A are collectively referred to as “Memory Stick Micro”
media, and products in B are collectively referred to as microSD memory card.

x

To remove the memory card/battery pack

Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

Note

• Never remove the memory card/battery pack when the access lamp (page 8) is lit.
This may cause damage to data in the memory card/internal memory.

14

GB

Setting the clock

GB

ON/OFF (Power)

1

2
3

4

5
6

7

button

Lens cover

Lower the lens cover.

The camera is turned on. The power lamp lights up green only when the
camera starts up.
Date & Time setting is displayed when you turn on the camera for the first
time.

• You can also turn on the camera by pressing the ON/OFF (Power)
button.

• It may take time for the power to turn on and allow operation.

Select a desired language.

Select a desired geographic location by following the
on-screen instructions, then touch [Next].

Set [Daylight Savings] or [Summer Time], [Date & Time
Format] and [Date & Time], then touch [Next].

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

Touch [OK].

Select the desired display color, following the
instructions on the screen, then touch [OK].

When an [In-Camera Guide] introductory message is
appeared on the screen, touch [OK].

GB

15

Shooting still images/movies

Shutter button

Shooting still images

Press the shutter button halfway down to focus.

1

When the image is in focus, a beep sounds and the z indicator lights.

Press the shutter button fully down to shoot an image.

2

Shooting movies

Touch (Movie button) to start recording.

1

• Use the W/T (zoom) lever to change the zoom scale.

Touch (Movie button) to stop recording.

2

Notes

• The sound of the lever operating will be recorded when the zoom function
operates while shooting a movie.

• Continuous shooting is possible for approximately 29 minutes at one time at the
camera’s default settings and when the temperature is approximately 25°C (77°F).
When movie recording is finished, you can restart recording by touching

(Movie button) again. Recording may stop to protect the camera depending

on the ambient temperature.

16

GB

Viewing images

Touch (Playback).

1

• When images on a memory card recorded with other cameras are played
back on this camera, the registration screen for the data file appears.

x

Selecting next/previous image

Touch (Next)/ (Previous) on the screen.

• To play back movies, touch (Playback) in the center of the screen.

• To zoom in, touch the still image being played back.

x

Deleting an image

Touch (Delete) t [This Image].

x

Returning to shooting images

Touch on the screen.

• You can also return to shooting mode by pressing the shutter button halfway
down.

GB

GB

17

In-Camera Guide

This camera is equipped with built-in instruction guide. This allows you to
search the camera’s functions according to your needs.

Touch (In-Camera Guide).

1

• The mark will appear on the bottom left of the screen while viewing.

Select a search method from [In-Camera Guide].

2

Shoot/ playback guide: Search for various operation functions in
shooting/viewing mode.

Icon guide: Search the function and meaning of displayed icons.
Troubleshooting: Search common problems and their solution.
Objective guide: Search functions according to your needs.
Keyword: Search functions by keywords.
History: View the last 10 items displayed in [In-Camera Guide].

18

GB

Introduction of other functions

Other functions used when shooting or playing back can be operated touching
the MENU on the screen. This camera is equipped with a Function Guide that
allows you to easily select from the functions. While displaying the guide, you
can use various functions.

x

Menu Items

Shooting

Movie shooting
scene

Easy Mode Shoot still images using minimal functions.

Movie button Shoots movies from all shooting modes quickly.

Flash Sets the flash settings.

Self-Timer Sets the self-timer settings.

Defocus Effect

Still Image
Size(Dual Rec)

Still Image Size/
Panorama Image
Size/Movie Quality/
Movie Size

Cont. Shooting
Settings

Macro Shoots beautiful close-up images of small subjects.

HDR Painting
effect

Select movie recording mode.

Set the level of background defocus effect when
shooting in Background Defocus mode.

Sets the still image size shot while recording a movie.

Select the image size and the quality for still images,
panoramic images or movie files.

Sets the burst shooting settings.

When [HDR Painting] is selected in Picture Effect, sets
the effect level.

GB

GB

19

Area of emphasis

Color hue

Extracted Color

EV Adjust the exposure manually.

ISO Adjust the luminous sensitivity.

White Balance Adjust color tones of an image.

Focus Select the focus method.

Metering Mode

Scene Recognition Set to automatically detect shooting conditions.

Soft Skin Effect Set the Soft Skin Effect and the effect level.

Smile Shutter

Smile Detection
Sensitivity

Face Detection

Anti Blink

Movie SteadyShot Sets the strength of SteadyShot in movie mode.

In-Camera Guide Search the camera’s functions according to your needs.

When [Miniature] is selected in Picture Effect, sets the
part to focus on.

When [Toy camera] is selected in Picture Effect, sets the
color hue.

When [Partial Color] is selected in Picture Effect, selects
the color to extract.

Select the metering mode that sets which part of the
subject to measure to determine the exposure.

Set to automatically release the shutter when a smile is
detected.

Set the Smile Shutter function sensitivity for detecting
smiles.

Select to detect faces and adjust various settings
automatically.

Set to automatically shoot two images and select image
in which the eyes are not blinking.

Viewing

Easy Mode Increase the text size on the screen for ease of use.

Date Select Selects the desired image to view by date.

Calendar Selects the date to be played back on Calendar.

Image Index Displays multiple images at the same time.

Slideshow Select a method of continuous playback.

GB

Delete Delete an image.

20

Paint Paints on a still image and saves it as a new file.

Retouch Retouch an image using various effects.

3D Viewing Set to play back images shot in 3D mode on a 3D TV.

View Mode Select the display format for images.

Display Cont.
Shooting Group

Protect Protect the images.

Print (DPOF) Add a print order mark to a still image.

Rotate Rotate a still image to the left or right.

Volume Adjusts the volume.

Exposure data

Number of images
in index

In-Camera Guide Search the camera’s functions according to your needs.

x

Setting items

Select to display burst images in groups or display all
images during playback.

Sets whether or not to display the shooting data (Exif
data) of the currently displayed file on the screen.

Sets the number of images displayed in the index screen.

If you touch the MENU while shooting or during playback, (Settings) is
provided as a final selection. You can change the default settings on the

(Settings) screen.

Shooting Settings

Main Settings

Memory Card

*

Tool

Clock Settings

* If a memory card is not inserted, (Internal Memory Tool) will be displayed and

only [Format] can be selected.

Movie format/AF Illuminator/Grid Line/Clear Image
Zoom/Digital Zoom/Wind Noise Reduct./Scene Recog.
Guide/Red Eye Reduction/Blink Alert/Write Date

Beep/Panel Brightness/Language Setting/Display color/
Demo Mode/Initialize/CTRL FOR HDMI/USB Connect
Setting/USB Power Supply/LUN Setting/Download
Music/Empty Music/Power Save

Format/Create REC.Folder/Change REC.Folder/Delete
REC.Folder/Copy/File Number

Area Setting/Date & Time Setting

GB

GB

21

Number of still images and recordable time of movies

The number of still images and recordable time may vary depending on the
shooting conditions and the memory card.

x

Still images

(Units: Images)

Capacity

Size

16M 3 335
VGA 98 9600
16:9(12M) 3 355

x

Movies

Internal memory Memory card

Approx. 19 MB 2 GB

The table below shows the approximate maximum recording times. These are
the total times for all movie files. Continuous shooting is possible for
approximately 29 minutes. The maximum size of an MP4-format movie file is
up to approximately 2 GB.

(h (hour), m (minute))

Capacity

Size

AVC HD 24M (FX) — 10 m

AVC HD 9M (HQ) — 25 m

MP4 12M — 15 m
MP4 3M — 1 h 10 m

The number in ( ) is the minimum recordable time.

• The recordable time of movies varies because the camera is equipped with VBR
(Variable Bit Rate), which automatically adjusts image quality depending on the
shooting scene. When you record a fast-moving subject, the image is clearer but
the recordable time is shorter because more memory is required for recording.
The recordable time also varies depending on the shooting conditions, the subject
or the image quality/size settings.

GB

Internal memory Memory card

Approx. 19 MB 2 GB

(10 m)

(15 m)

22

Notes on using the camera

Functions built into this camera

• This manual describes the functions of 1080 60i-compatible and 1080 50i-

compatible devices.
To check whether your camera is a 1080 60i-compatible device or a 1080 50i­compatible device, check for the following marks on the bottom of the camera.
1080 60i-compatible device: 60i
1080 50i-compatible device: 50i

• Do not watch 3D images shot with this camera for extended periods of time on

3D-compliant monitors.

• When you view 3D images shot with this camera on a 3D-compliant monitors, you

may experience discomfort in the form of eye strain, fatigue, or nausea. To prevent
these symptoms, we recommend that you take regular breaks. However, you need
to determine for yourself the length and frequency of breaks you require, as they
vary according to the individual. If you experience any type of discomfort, stop
viewing the 3D images until you feel better, and consult a physician as necessary.
Also refer to the operating instructions supplied with the device or software you
have connected or are using with this camera. Note that a child’s eyesight is still at
the development stage (particularly children below the age of 6).
Consult a pediatrician or ophthalmologist before letting your child view 3D
images, and make sure he/she observes the above precautions when viewing such
images.

On use and care

Avoid rough handling, disassembling, modifying, physical shock, or impact such as
hammering, dropping, or stepping on the product. Be particularly careful of the lens.

Notes on recording/playback

• Before you start recording, make a trial recording to make sure that the camera is

working correctly.

• The camera is neither dust-proof, nor splash-proof, nor water-proof.

• Avoid exposing the camera to water. If water enters inside the camera, a

malfunction may occur. In some cases, the camera cannot be repaired.

• Do not aim the camera at the sun or other bright light. It may cause the

malfunction of the camera.

• If moisture condensation occurs, remove it before using the camera.

• Do not shake or strike the camera. It may cause a malfunction and you may not be

able to record images. Furthermore, the recording media may become unusable or
image data may be damaged.

GB

GB

23

Do not use/store the camera in the following places

• In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become
deformed and this may cause a malfunction.

• Under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a
malfunction.

• In a location subject to rocking vibration

• Near a location that generates strong radio waves, emits radiation or is strongly
magnetic place. Otherwise, the camera may not properly record or play back
images.

• In sandy or dusty places
Be careful not to let sand or dust get into the camera. This may cause the camera to
malfunction, and in some cases this malfunction cannot be repaired.

On carrying

Do not sit down in a chair or other place with the camera in the back pocket of your
trousers or skirt, as this may cause malfunction or damage the camera.

Carl Zeiss lens

The camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp
images with excellent contrast. The lens for the camera has been produced under a
quality assurance system certified by Carl Zeiss in accordance with the quality
standards of Carl Zeiss in Germany.

Note on the screen and lens

The screen is manufactured using extremely high-precision technology so over

99.99% of the pixels are operational for effective use. However, some tiny black

and/or bright dots (white, red, blue or green) may appear on the screen. These dots
are a normal result of the manufacturing process, and do not affect the recording.

On camera’s temperature

Your camera and battery may get hot due to continuous use, but it is not a
malfunction.

On the overheat protection

Depending on the camera and battery temperature, you may be unable to record
movies or the power may turn off automatically to protect the camera.
A message will be displayed on the screen before the power turns off or you can no
longer record movies. In this case, leave the power off and wait until the camera and
battery temperature goes down. If you turn on the power without letting the camera
and battery cool enough, the power may turn off again or you may be unable to
record movies.

24

GB

On charging the battery

If you charge a battery that has not been used for a long time, you may be unable to
charge it to the proper capacity.
This is due to the battery characteristics, and is not a malfunction. Charge the battery
again.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provisions of the
copyright laws.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content
due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe
the surface with a dry cloth. To prevent damage to the finish or casing:
– Do not expose the camera to chemical products such as thinner, benzine, alcohol,

disposable cloths, insect repellent, sunscreen or insecticide.

GB

GB

25

Specifications

Camera

[System]

Image device: 7.77 mm (1/2.3 type)

Exmor R CMOS sensor

Total pixel number of camera:

Approx. 16.8 Megapixels

Effective pixel number of camera:

Approx. 16.2 Megapixels

Lens: Carl Zeiss Vario-Tessar 5× zoom

lens
f = 4.7 mm – 23.5 mm (26 mm –
130 mm (35 mm film equivalent))
F3.5 (W) – F4.8 (T)
While shooting movies (16:9):
28 mm – 140 mm*
While shooting movies (4:3):
35 mm – 175 mm*
* When [Movie SteadyShot] is set

to [Standard]
SteadyShot: Optical
Exposure control: Automatic exposure,

Scene Selection (15 modes)

White balance: Auto, Daylight,

Cloudy, Fluorescent 1/2/3,
Incandescent, Flash, One Push

Signal format:

For 1080 50i: PAL color, CCIR
standards HDTV 1080/50i
specification
For 1080 60i: NTSC color, EIA
standards HDTV 1080/60i
specification

GB

26

File format:

Still images: JPEG (DCF Ver. 2.0,
Exif Ver. 2.3, MPF Baseline)
compliant, DPOF compatible
3D still images: MPO (MPF
Extended (Disparity Image))
compliant
Movies (AVCHD format):
AVCHD
Video: MPEG-4 AVC/H.264
Audio: Dolby Digital 2ch,
equipped with Dolby Digital Stereo
Creator

• Manufactured under license from

Dolby Laboratories.
Movies (MP4 format):
Video: MPEG-4 AVC/H.264
Audio: MPEG-4 AAC-LC 2ch

Recording media: Internal Memory

(Approx. 19 MB), “Memory Stick
Micro” media, microSD memory
cards

Flash: Flash range (ISO speed

(Recommended Exposure Index)
set to Auto):
Approx. 0.08 m to 3.7 m
(3 1/4 inches to 12 ft 1 3/4 inches)
(W)
Approx. 0.6 m to 2.6 m
(1 ft 11 5/8 inches to 8 ft
6 3/8 inches) (T)

[Input and Output connectors]

HDMI connector: HDMI micro jack
Multi connector: Type3b

(AV-out/USB/DC-in):
Video output
Audio output (Stereo)
USB communication

USB communication: Hi-Speed USB

(USB 2.0)

[Screen]

OLED:

Wide (16:9), 8.3 cm (3.3 type) TFT
drive

Total number of dots:

1 229 760 dots equivalent

[Power, general]

Power: Rechargeable battery pack

NP-BN, 3.6 V
AC Adaptor AC-UB10/UB10B,
5V

Power consumption (during shooting):

Approx. 1.0 W

Operating temperature: 0 °C to 40 °C

(32 °F to 104 °F)

Storage temperature: –20 °C to +60 °C

(–4 °F to +140 °F)

Dimensions (CIPA compliant):

92.9 mm × 54.4 mm × 13.2 mm
(3 3/4 inches × 2 1/4 inches ×
17/32 inches) (W/H/D)

Mass (CIPA compliant) (including NP-

BN battery pack, “Memory Stick
Micro” media):

Approx. 109 g (3.8 oz)
Microphone: Stereo
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III:

Compatible

AC Adaptor AC-UB10/UB10B

Power requirements: AC 100 V to

240 V, 50 Hz/60 Hz, 70 mA
Output voltage: DC 5 V, 0.5 A
Operating temperature: 0 °C to 40 °C

(32°F to 104°F)
Storage temperature: –20 °C to +60 °C

(–4 °F to +140 °F)
Dimensions:

Approx. 50 mm × 22 mm × 54 mm

(2 inches × 7/8 inches ×

2 1/4 inches) (W/H/D)
Mass:

For the USA and Canada:

Approx. 48 g (1.7 oz)

For countries or regions other than

the USA and Canada:

Approx. 43 g (1.5 oz)

Rechargeable battery pack
NP-BN

Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 0.9 A
Capacity:

typical: 2.3 Wh (630 mAh)

minimum: 2.2 Wh (600 mAh)

Design and specifications are subject to
change without notice.

GB

GB

27

Trademarks

• The following marks are trademarks
of Sony Corporation.

“Memory Stick Micro”

• Windows is registered trademark of
Microsoft Corporation in the United
States and/or other countries.

• Macintosh is registered trademark of
Apple Inc.

• microSDHC logo is a trademark of
SD-3C, LLC.

• “ ” and “PlayStation” are
registered trademarks of Sony
Computer Entertainment Inc.

• In addition, system and product
names used in this manual are, in
general, trademarks or registered
trademarks of their respective
developers or manufacturers.
However, the ™ or ® marks are not
used in all cases in this manual.

• Add further enjoyment with your
PlayStation 3 by downloading the
application for PlayStation 3 from
PlayStation Store (where available.)

• The application for PlayStation 3
requires PlayStation Network
account and application download.
Accessible in areas where the
PlayStation Store is available.

, “Cyber-shot,”

Additional information on this
product and answers to frequently
asked questions can be found at
our Customer Support Website.

28

GB

GB

GB

29

Español

Nombre del producto: Cámara Digital
Modelo: DSC-TX55

POR FAVOR LEA DETALLADAMENTE ESTE MANUAL DE INSTRUCCIONES
ANTES DE CONECTAR Y OPERAR ESTE EQUIPO.

RECUERDE QUE UN MAL USO DE SU APARATO PODRÍA ANULAR LA
GARANTÍA.

AVISO

Para reducir el riesgo de incendio o descarga eléctrica, no
exponga la unidad a la lluvia ni a la humedad.

INSTRUCCIONES DE SEGURIDAD IMPORTANTES

-GUARDE ESTAS INSTRUCCIONES

PELIGRO
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA
ELÉCTRICA, SIGA ATENTAMENTE ESTAS INSTRUCCIONES

Si la forma de la clavija no encaja en la toma de corriente, utilice un accesorio adaptador de
clavija de la configuración apropiada para la toma de corriente.

PRECAUCIÓN

[ Batería

Si la batería se manipula indebidamente, puede explotar y causar un incendio o provocarle
quemaduras químicas. Tenga en cuenta las siguientes precauciones.

• No desmonte el producto.

• No aplaste ni exponga la batería a impactos tales como golpes o caídas, ni la deje caer o
la pise.

• No provoque un cortocircuito en la batería ni permita que objetos metálicos entren en
contacto con sus terminales.

• No exponga la batería a temperaturas superiores a 60 °C como a la luz solar directa, o en
el interior de un automóvil estacionado al sol.

• No la incinere ni la arroje al fuego.

• No manipule baterías de iones de litio dañadas o con fugas.

• Asegúrese de cargar la batería con un cargador de baterías original de Sony o con un
dispositivo que pueda cargarla.

• Mantenga la batería fuera del alcance de niños pequeños.

ES

• Mantenga la batería seca.

2