Sony DSC-RX100M3G User Manual [ru]

4-539-039-32(1)

Digital Still Camera / Instruction Manual GB

Цифровой фотоаппарат / Инструкция по эксплуатации

Цифровий фотоапарат / Посібник з експлуатації UA

DSC-RX100M3

English

Learning more about the camera (“Help Guide”)

“Help Guide” is an on-line manual. You can read the “Help Guide” on your computer or smartphone. Refer to it for in-depth instructions on the many functions of the camera.

URL:

http://rd1.sony.net/help/dsc/1410/h_zz/

Viewing the Guide

This camera is equipped with a built-in instruction guide.

Fn (Function)

C/ (Delete)

In-Camera Guide

The camera displays explanations for MENU/Fn (Function) items and the setting values.

1 Press the MENU button or the Fn (Function) button. 2 Select the desired item, then press the C/ (Delete) button.

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.

Model No. WW808161 (DSC-RX100M3)

Serial No. _____________________________

Model No. AC-UB10C/AC-UB10D

Serial No. _____________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the apparatus.

The power cord (mains lead), if supplied, is designed specifically for use with this camera only, and should not be used with other electrical equipment.

For Customers in the U.S.A. and Canada

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operatio n is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 B/NMB-3 B

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

For Customers in the U.S.A.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: WW808161 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

San Diego, CA 92127 U.S.A.

For Customers in Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

For Customers in Europe

[ Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany

Hereby, Sony Corporation, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Disposal of waste batteries and electrical and electronic

equipment (applicable in the European Union and other European countries with separate collection systems)

This symbol on the product, the battery or on the packaging i ndicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or

0.004% lead. By ensuring these products and batteries are disposed of

the environment and human health which could otherwise be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and th e electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

correctly, you will help prevent potentially negative consequences for

For Customers in Singapore

For customers who purchased their camera from a store in Japan that caters to tourists

[ Note

Some certification marks for standards supported by the camera can be confirmed on the screen of the camera. Select MENU t (Setup) 6 t [Certification Logo]. If display is not possible due to problems such as camera failure, contact your Sony dealer or local authorized Sony service facility.

Checking the supplied items

The number in parentheses indicates the number of pieces.

• Camera (1)

• Rechargeable Battery Pack NP-BX1 (1)

• Micro USB Cable (1)

• AC Adaptor AC-UB10C/UB10D (1)

• Power Cord (mains lead) (not supplied in the USA and Canada) (1)

• Wrist Strap (1)

• Strap adapter (2)

(Strap adapters are used to attach the shoulder strap (sold separately), as illustrated.)

• Instruction Manual (this manual) (1)

• Wi-Fi Connection/One-touch (NFC) Guide (1) This guide explains the functions that require a Wi-Fi connection.

For further details on Wi-Fi functions/One-touch (NFC) functions, refer to the “Wi-Fi Connection/One-touch (NFC) Guide” (supplied) or the “Help Guide” (page 2).

Identifying parts

D Mode dial

(Intelligent Auto)/

(Superior Auto)/

(Program Auto)/

(Aperture Priority)/

(Shutter Priority)/

(Manual Exposure)/

(Memory recall)/

(Movie)/ (Sweep Panorama)/ (Scene Selection)

E For shooting: W/T (zoom) lever

For viewing: (Index) lever/ Playback zoom lever

F Self-timer lamp/AF illuminator G Flash

• Do not cover the flash with your

finger.

• When using the flash, slide the

(Flash pop-up) switch. If not using the flash, press it down manually.

• When not using the flash, press it

back into the camera body.

H Diopter-adjustment lever

A ON/OFF (Power) switch B Power/Charge lamp C Shutter button

I Viewfinder

• When using the viewfinder, slide down the Viewfinder pop-up switch, then pull the eyepiece out from the viewfinder until it clicks.

• When you look into the viewfinder, the viewfinder mode is activated, and when you take your face away from the viewfinder, the viewing mode returns to the monitor mode.

J Microphone K Viewfinder pop-up switch L Hook for strap M (N Mark)

• Touch the mark when you connect the camera to a smartphone equipped with the NFC function.

• NFC (Near Field Communication) is an international standard of the short-range wireless communication technology.

N Control ring O Lens P Eye sensor Q (Flash pop-up) switch

R Monitor

• You can adjust the monitor to an easily viewable angle and shoot from any position.

S Light sensor T For shooting: Fn (Function)

button For viewing: (Send to Smartphone) button

U MOVIE (Movie) button V Multi/Micro USB Terminal

• Supports Micro USB compatible device.

W HDMI micro jack X MENU button Y Wi-Fi sensor (built-in) Z Control wheel

wj (Playback) button wk C/ (Custom/Delete) button wl Battery insertion slot e; Battery eject lever ea Tripod socket hole

• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

es Access lamp ed Memory card slot ef Battery/Memory card cover eg Speaker

Inserting the battery pack

Battery eject lever

Open the cover.

Insert the battery pack.

• While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion.

• Closing the cover with the battery inserted incorrectly may damage the camera.

Charging the battery pack

For customers in the USA and Canada

Power cord (Mains lead)

For customers in countries/regions other than the USA and Canada

Connect the camera to the AC Adaptor (supplied),

using the micro USB cable (supplied).

Connect the AC Adaptor to the wall outlet (wall socket).

The power/charge lamp lights orange, and charging starts.

• Turn off the camera while charging the battery.

• You can charge the battery pack even when it is partially charged.

• When the power/charge lamp flashes and charging is not finished, remove and re-insert the battery pack.

Power/Charge lamp Lit: Charging Off: Charging finished Flashing:

Charging error or charging paused temporarily because the camera is not within the proper temperature range

Notes

• If the power/charge lamp on the camera flashes when the AC Adaptor is connected to the wall outlet (wall socket), this indicates that charging is temporarily stopped because the temperature is outside the recommended range. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).

• The battery pack may not be effectively charged if the terminal section of the battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton swab to clean the terminal section of the battery.

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the power source.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied) and AC Adaptor (supplied).

• The AC Adaptor AC-UD11 (sold separately) may not be available in some countries/regions.

Charging time (Full charge)

The charging time is approximately 230 min. using the AC Adaptor (supplied).

Notes

• The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using a micro USB cable. Connect the camera to the computer with the camera turned off.

To a USB jack

• If you connect the camera to a computer when power is turned on, the camera will be powered by the computer, which allows you to import images to a computer without worrying about the battery running out.

Notes

• Note the following points when charging via a computer: – If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period of time.

– Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer and the camera. That may cause the camera to malfunction. Before turning on/ off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer.

– No guarantees are made for charging using a custom-built computer or a

modified computer.

Battery life and number of images that can be recorded and played back

Battery life Number of images

Shooting (still images)

Typical movie shooting

Continuous movie shooting

Viewing (still images) Approx. 215 min. Approx. 4300 images

Notes

• The above number of images applies when the battery pack is fully charged. The

number of images may decrease depending on the conditions of use.

• The number of images that can be recorded is for shooting under the following

conditions: – Using Sony Memory Stick PRO Duo™ (Mark2) media (sold separately) – The battery pack is used at an ambient temperature of 25°C (77°F). – [Display Quality] is set to [Standard]

• The number for “Shooting (still images)” is based on the CIPA standard, and is for

shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – DISP is set to [Display All Info.]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times.

• The numbers of minutes for movie shooting are based on the CIPA standard, and

are for shooting under the following conditions: – [ Record Setting]: 60i 17M(FH)/50i 17M(FH) – Typical movie shooting: Battery life based on repeatedly starting/stopping

shooting, zooming, turning on/off, etc.

– Continuous movie shooting: Battery life based on non-stop shooting until the

limit (29 minutes) has been reached, and then continued by pressing the MOVIE button again. Other functions, such as zooming, are not operated.

Screen Approx. 160 min. Approx. 320 images

Viewfinder Approx. 115 min. Approx. 230 images

Screen Approx. 50 min. —

Viewfinder Approx. 50 min. —

Screen Approx. 85 min. —

Viewfinder Approx. 90 min. —

Supplying power

You can use the AC Adaptor AC-UD10 (sold separately) or AC-UD11 (sold separately) for shooting and playback to supply power when shooting or playing back images.

Notes

• You cannot shoot or play back images while the supplied AC Adaptor is connected to the camera.

Inserting a memory card (sold separately)

Ensure the notched corner faces correctly.

Open the cover.

Insert the memory card (sold separately).

• With the notched corner facing as illustrated, insert the memory card until it clicks into place.

Close the cover.

Memory cards that can be used

Memory card For still images For movies

Memory Stick XC-HG Duo™

Memory Stick PRO Duo (Mark2 only)

Memory Stick PRO-HG Duo™

B Memory Stick Micro™ (M2) (Mark2 only)

SD memory card (Class 4 or faster)

SDHC memory card (Class 4 or faster)

SDXC memory card (Class 4 or faster)

microSD memory card (Class 4 or faster)

microSDHC memory card (Class 4 or faster)

microSDXC memory card (Class 4 or faster)

• In this manual, the products in the table are collectively referred to as follows:

A: Memory Stick PRO Duo media B: Memory Stick Micro media C: SD card D: microSD memory card

• When recording XAVC S format movies, use the following memory cards: – SDXC memory card (64 GB or more and Class 10 or faster) – SDXC memory card (64 GB or more and UHS-I-compatible) – Memory Stick XC-HG Duo media

• This camera supports UHS-I-compatible SD cards.

Notes

• When using Memory Stick Micro media or microSD memory cards with this camera, make sure to use with the appropriate adaptor.

To remove the memory card/battery pack

Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

Notes

• Never remove the memory card/battery pack when the access lamp (page 10) is lit. This may cause damage to data in the memory card.

Setting the clock

Power/Charge lamp (green)

ON/OFF (Power)

Control wheel

Select items: b/B Set the numeric value of date and

v/V//

time:

Set:

Press the ON/OFF (Power) button.

Date & Time setting is displayed when you turn on the camera for the first time.

• It may take time for the power to turn on and allow operation.

Check that [Enter] is selected on the screen, then press

z on the control wheel.

Select a desired geographic location by following the

on-screen instructions, then press z.

Set [Daylight Savings], [Date/Time] and [Date Format],

then press z.

• When setting [Date/Time], midnight is 12:00 AM, and noon is 12:00 PM.

Check that [Enter] is selected, then press z.

Shooting still images/movies

Shutter button

W/T (zoom) lever

Mode dial

: Intelligent Auto

: Movie

MOVIE

Shooting still images

Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z or indicator lights.

Press the shutter button fully down to shoot an image.

Shooting movies

Press the MOVIE (Movie) button to start recording.

• Use the W/T (zoom) lever to change the zoom scale.

Press the MOVIE button again to stop recording.

Notes

• When using the zoom function while shooting a movie, the sound of the camera operating will be recorded. The sound of the MOVIE button operating may also be recorded when movie recording is finished.

• Continuous movie shooting is possible for approximately 29 minutes at one time with the camera’s default settings and when the ambient temperature is approximately 25°C (77°F). When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop to protect the camera depending on the ambient temperature.

W: zoom out T: zoom in

Viewing images

W: zoom out T: zoom in

Control wheel

(Playback)

C/ (Delete)

Press the (Playback) button.

Selecting next/previous image

Select an image by pressing B (next)/b (previous) on the control wheel or by turning the control wheel. Press z in the center of the control wheel to view movies.

Deleting an image

1 Press the C/ (Delete) button. 2 Select [Delete] with v on the control wheel, then press z.

Returning to shooting images

Press the shutter button halfway down.

Select images: B (next)/b (previous) or

turn the control wheel

Set: z

Introduction of other functions

Control ring

Fn (Function)

Control wheel

DISP (Display Contents): Allows you to change the screen display.

(Drive Mode): Allows you to switch between shooting methods, such

as single shooting, continuous shooting or bracket shooting.

/ (Exposure Comp./Photo Creativity): Allows you to adjust image brightness./Allows you to operate the camera intuitively and shoot creative images easily.

(Flash Mode): Allows you to select a flash mode for still images.

Fn (Function) button

Allows you to register 12 functions and recall those functions when shooting.

1 Press the Fn (Function) button. 2 Select the desired function by pressing v/V/b/B on the control wheel. 3 Select the setting value by turning the control wheel or the control ring.

Control ring

Your favorite functions can be assigned to the control ring. When shooting, established settings can be changed just by turning the control ring.

Control wheel

Menu Items

(Camera Settings)

Image Size Selects the size of still images.

Aspect Ratio Selects the aspect ratio for still images.

Quality Sets the image quality for still images.

Panorama: Size Selects the size of panoramic images.

Panorama: Direction Sets the shooting direction for panoramic images.

File Format Selects the movie file format.

Record Setting Selects the size of the recorded movie frame.

Dual Video REC

Drive Mode Sets the drive mode, such as for continuous shooting.

Flash Mode Sets the flash settings.

Flash Comp. Adjusts the intensity of flash output.

Red Eye Reduction Reduces the red-eye phenomenon when using flash.

Focus Mode Selects the focus method.

Focus Area Selects the area of focus.

AF Illuminator

Exposure Comp. Comp ensates for the brightness of the entire image.

ISO Adjusts the luminous sensitivity.

ND Filter

Metering Mode Selects the method for measuring brightness.

White Balance Adjusts color tones of an image.

DRO/Auto HDR

Creative Style

Sets whether to simultaneously record an XAVC S movie and MP4 movie or an AVCHD movie and MP4 movie.

Sets the AF illuminator, which provides light for a dark scene to aid focusing.

Sets the function that reduces the amount of light. You can set to a slower shutter speed, reduce the aperture value, etc.

Compensates automatically for brightness and contrast.

Selects the desired image processing. You can also adjust contrast, saturation and sharpness.

Picture Effect

Focus Magnifier

Long Exposure

High ISO NR

Center Lock-on AF

Smile/Face Detect.

Selects the desired effect filter to achieve a more impressive and artistic expression.

Enlarges the image before shooting so that you can check the focus.

Sets noise reduction processing for shots with a shutter speed of 1/3 second or longer.

Sets noise reduction processing for high-sensitivity shooting.

Sets the function to track a subject and continue focusing when pressing the center button in the shooting screen.

Selects to detect faces and adjust various settings automatically. Sets to automatically release the shutter when a smile is detected.

Soft Skin Effect Sets the Soft Skin Effect and the effect level.

Analyzes the scene when capturing faces, close-ups,

Auto Obj.

Framing

Scene Selection

Movie

SteadyShot

or subjects tracked by Lock-on AF function, and automatically trims and saves another copy of the image with a more impressive composition.

Selects pre-set settings to match various scene conditions.

Selects the exposure mode to suit your subject or effect.

Sets SteadyShot for shooting still images. Reduces blur from camera shake when shooting while holding the camera.

SteadyShot Sets SteadyShot for shooting movies.

Color Space Changes the range of reproducible colors.

Auto Slow Shut.

Audio Recording Sets whether to record audio when shooting a movie.

Micref Level Selects the microphone level during movie recording.

Wind Noise Reduct. Reduces wind noise during movie recording.

Sets the function that automatically adjusts the shutter speed following the brightness of the environment in movie mode.

Memory recall

Memory Registers the desired modes or camera settings.

Selects a setting registered in advance when the mode dial is set to MR (Memory recall).

(Custom Settings)

Zebra Displays stripes to adjust brightness.

MF Assist Displays an enlarged image when focusing manually.

Focus Magnif. Time

Grid Line

Auto Review

DISP Button

Peaking Level

Peaking Color Sets the color used for the peaking function.

Exposure Set. Guide

Live View Display

Pre-AF

Zoom Setting

FINDER/MONITOR

AEL w/ shutter

Self-portrait/ -timer

Sets the length of time the image will be shown in an enlarged form.

Sets a grid line display to enable alignment to a structural outline.

Sets auto review to display the captured image after shooting.

Sets the type of information to be displayed on the monitor or in the viewfinder by pressing DISP on the control wheel.

Enhances the outline of in-focus ranges with a specific color when focusing manually.

Sets the guide displayed when exposure settings are changed in the shooting screen.

Sets whether or not to reflect settings such as exposure compensation in screen display.

Sets whether or not to perform auto focus before the shutter button is half pressed.

Sets whether to use the Clear Image Zoom and Digital Zoom when zooming.

Sets the method for switching between the viewfinder and screen.

Sets whether to perform AEL when the shutter button is half pressed. This is useful when you want to adjust the focus and exposure separately.

Sets whether to use a 3-second delay self-timer when the screen is tilted upward about 180 degrees.

Bracket order

Face Registration

Write Date

Function Menu Set.

Custom Key Settings

Zoom Func. on Ring

MOVIE Button Sets whether to always activate the MOVIE button.

Wheel Lock

Sets order of shooting for exposure bracket and white balance bracket.

Registers or changes the person to be given priority in the focus.

Sets whether to record a shooting date on the still image.

Customizes the functions displayed when the Fn (Function) button is pressed.

Assigns a desired function to the button and the control ring.

Sets the zooming function of the control ring. When you select [Step], you can move the zoom position to a fixed step of the focal length.

Sets whether to disable the control wheel temporarily by using the Fn button when shooting. You can disable/enable the control wheel by pressing and holding down the Fn button.

(Wireless)

Send to Smartphone Transfers images to display on a smartphone.

Send to Computer

View on TV You can view images on a network-enabled TV.

One-touch(NFC)

Airplane Mode

WPS Push

Access Point Set. You can register your access point manually.

Edit Device Name

Disp MAC Address Displays the MAC address of the camera.

Backs up images by transferring them to a computer connected to a network.

Assigns an application to One-touch (NFC). You can call up the application when shooting by touching an NFC-enabled smartphone to the camera.

You can set this device to not perform wireless communications.

You can register the access point to the camera easily by pushing the WPS button.

You can change the device name under Wi-Fi Direct, etc.

SSID/PW Reset

Reset Network Set. Resets all network settings.

Resets the SSID and password of smartphone connection.

(Application)

Application List

Introduction Displays instructions on using the application.

Displays the application list. You can select the application you want to use.

(Playback)

Delete Deletes an image.

View Mode

Image Index Displays multiple images at the same time.

Display Rotation Sets the playback direction of the recording image.

Slide Show Shows a slide show.

Rotate Rotates the image.

Sets the way in which images are grouped for playback.

Enlarge Image Enlarges the playback images.

4K Still Image PB

Protect Protects the images.

Motion Interval ADJ

Specify Printing Adds a print order mark to a still image.

Beauty Effect

Outputs still images in 4K resolution to an HDMIconnected TV that supports 4K.

Adjusts the interval for showing the tracking of subjects in [Motion Shot Video], where the tracking of the subject’s motion will be shown when playing back movies.

Retouches a person’s face on a still image and saves the retouched image as a new image.

(Setup)

Monitor Brightness Sets the screen brightness.

Viewfinder Bright. Sets the brightness of the electronic viewfinder.

Finder Color Temp. Sets the color temperature of the viewfinder.

Volume Settings Sets the volume for movie playback.

Audio signals Sets the operating sound of the camera.

Upload Settings

Tile Menu

Mode Dial Guide

Delete confirm.

Display Quality Sets the display quality.

Pwr Save Start Time

PAL/NTSC Selector (only for 1080 50i compatible models)

Demo Mode Sets demonstration playback of a movie to on or off.

HDMI Settings Sets the HDMI settings.

USB Connection Sets the USB connection method.

USB LUN Setting

USB Power Supply

Language Selects the language.

Date/Time Setup Sets date and time, and daylight savings.

Area Setting Sets the location of use.

Format Formats the memory card.

File Number

Select REC Folder Changes the selected folder for storing images.

Sets the upload function of the camera when using an Eye-Fi card.

Sets whether to display the tile menu every time you press the MENU button.

Turns the mode dial guide (the explanation of each shooting mode) on or off.

Sets whether Delete or Cancel is preselected in the Delete confirmation screen.

Sets the length of time until the camera turns off automatically.

By changing the TV format of the device, shooting in a different movie format is possible.

Enhances compatibility by limiting the functions of the USB connection. Set to [Multi] in normal conditions and to [Single] only when the connection between the camera and a computer or AV component cannot be established.

Sets whether to supply power using a USB connection.

Sets the method used to assign file numbers to still images and movies.

New Folder

Folder Name Sets the folder format for still images.

Recover Image DB

Display Media Info.

Version Displays the camera software version.

Setting Reset Restores settings to their defaults.

Creates a new folder for storing still images and movies (MP4).

Recovers the image database file and enables recording and playback.

Displays the remaining recording time of movies and the recordable number of still images on the memory card.

Features of PlayMemories Home™

The software PlayMemories Home allows you to import still images and movies to your computer and use them. PlayMemories Home is required for importing XAVC S movies and AVCHD movies to your computer.

Playing back importe d images

Importing images from your camera

For Windows, the following functions are also available:

Viewing images on a calendar

Notes

• An Internet connection is required to install PlayMemories Home.

• An Internet connection is required to use PlayMemories Online or other network

services. PlayMemories Online or other network services may not be available in some countries or regions.

• Use the following URL for Mac applications:

http://www.sony.co.jp/imsoft/Mac/

• If the software PMB (Picture Motion Browser), supplied with models released

before 2011, has already been installed on your computer, PlayMemories Home will overwrite it during the installation. Use PlayMemories Home, the successor software of PMB.

Creating movie discs

Uploading images to network services

Sharing images on PlayMemories Online™

System requirements

You can find the system requirements for the software at the following URL: www.sony.net/pcenv/

Installing PlayMemories Home on a computer

Using the Internet browser on your computer, go to the

following URL, and then install PlayMemories Home.

www.sony.net/pm/

• For details on PlayMemories Home, refer to the following PlayMemories Home support page (English only): http://www.sony.co.jp/pmh-se/

• When installation is complete, PlayMemories Home starts.

Connect the camera to your computer using the micro

USB cable (supplied).

• New functions may be installed in PlayMemories Home. Connect the camera to your computer even if PlayMemories Home is already installed on your computer.

Notes

• Do not disconnect the micro USB cable (supplied) from the camera while the operating screen or the accessing screen is displayed. Doing so may damage the data.

• To disconnect the camera from the computer, click on the tasktray, then click [Eject PMHOME].

+ 98 hidden pages