Sony DPT-RP1 Users guide

Connecting to a computer via

Bluetooth® (Mac)

To connect the Digital Paper (DPT-RP1) to your computer via Bluetooth, follow the steps
below to pair the Digital Paper and computer, and then connect via Bluetooth..

Pairing is required for the first time for Bluetooth connection.
For pairing, follow “Pairing the computer and the Digital Paper” below.

If the Bluetooth pairing is completed between the Digital Paper and the computer, click here.

Pairing the computer and the Digital Paper

The following steps for pairing are required when using the Bluetooth connection for the
first time.

* For step 1 through 3, operate on the Digital Paper.

1 Press the home button on the Digital Paper to display the home menu.

2 Tap [Settings] > [Bluetooth] box to add a check mark.

3 Tap [Settings] > [Bluetooth Settings] > [Bluetooth Pairing].

[Bluetooth Pairing..] is displayed when Digital Paper is ready for pairing.

[DPT-RP1_XXXXXXX] is displayed as the Bluetooth device name.

1

* For step 4 through 5, use the computer.

4 From Dock, click [System Preference] > [Bluetooth].

5 Select the Digital Paper device name, [DPT-RP1_XXXXXXX], in [Devices], and

then click [Pair].

From [DPT-RP1_XXXXXXX], [Pairing] is changed to [Connected], and then [Not
Connected] is displayed.

Hint

If [Show Bluetooth in menu bar] is added with a check in the dialog of step 5 above, it
is possible to connect or disconnect the Digital Paper from the menu bar the next time.

2