Sony D-FJ200 User Manual

TV/WB/FM/AM Portable CD Player

Operating Instructions

D-FJ200

“WALKMAN” is a registered trademark of Sony Corporation to represent Headphone Stereo products.

CD player (front)

1 ./>•TUNE –/+•PRESET –/+

2 3 4 RADIO ON/BAND•MEMORY 5 u*

i (headphones) jack

OPEN

6 HOLD (rear)

*The button has a tactile dot.

CD player (inside)

Remote control

5 u*1 .

6 HOLD

qs VOL +*/–

*The button has a tactile dot.

1 > 2 3 0 qa

x RADIO ON/ BAND•OFF

qd Hook

Note

Use only the supplied remote control. You cannot operate this CD player with the remote control supplied with other CD players.

Headphones or earphones

is a trademark of Sony Corporation.

Open the battery compartment lid.

Display on CD player

Band

Track number/ PRESET number

PRESET

Play mode

AC power adaptor

DC IN 4.5V

3-262-448-11 (1)

7 DISPLAY/MENU 8 P MODE/ 9 SOUND

Strap hole

q; qa x•RADIO OFF Display

DC IN 4.5 V (external power input) jack

qs VOL +*/–

Insert the # end first (for both batteries).

G-PROTECTION

Playing time/ Frequency

AVLS

Bookmark

LOCAL

to an AC outlet

Sound mode

PGM

Remaining battery power

D E

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

CAUTION

The use of optical instruments with this product will increase eye hazard.

Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority.

CAUTION

• INVISIBLE LASER RADIATION WHEN OPEN

• DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENT

• CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN

• DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).

For customers who purchased this product in the USA

Owner’s Record

The model number and the serial number are located at the rear of the CD player. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. D-FJ200 Serial No. ____________________________

Product registration

Please register this product on line at www.sony.com/ productregistration. <http://www.sony.com/productregistration>

Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you.

If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name: SONY Model No.: D-FJ200 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road,

Telephone No.: 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. –

Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

For the area code of the model you purchased, check the upper left side of the bar code on the package.

Oradell, NJ 07649 USA

Label side up

To insert the batteries 1 Open the battery compartment lid inside your CD

2 Insert two batteries by matching the 3 to the diagram

Battery life* (approx. hours)

(When the CD player is used on a flat and stable place.) Playing time varies depending on how the CD player is used.

Two Sony alkaline 48 42 70 batteries LR6 (SG) (produced in Japan)

* Measured value by the standard of JEITA (Japan

To check the remaining power of the batteries

You can check it in the display. Replace the batteries when “

t t Lo batt* *Beep sounds.

• The indicator sections of roughly shows the

• Depending on operating conditions, the indicator

Notes on using the dry batteries

• Be sure to remove the AC power adaptor.

• When the batteries are depleted, replace both batteries

Playing a CD

To insert a CD 1 Press OPEN to open the lid (A).

2 Fit the CD to the pivot, then close the lid (D).

• This CD player can play CD-Rs/CD-RWs recorded in the

• This product is designed to play back discs that conform to

To operate the CD player

Button/Switch Function/Operation

1 ./> For CD player: Press . or > (AMS* TUNE –/+ current/next track. PRESET –/+ Press . or > repeatedly to

2 RADIO ON Press to turn on the radio. 3 BAND Press to change the band. 4 MEMORY Press and hold to enter the preset

5 u • Press to start play. Press again to

(play/pause) pause play.

6 HOLD Use to lock the controls on your

7 DISPLAY/ • Press once to display “track

MENU number and remaining time of the

Power Sources

To use the AC power adaptor (C) 1 Connect the AC power adaptor (not supplied) to an

AC outlet.

To use the batteries (B)

Use only the following batteries for your CD player:

Dry batteries

• LR6 (size AA) alkaline batteries

player.

in the battery compartment and close the lid until it clicks into place.

G-PROTECTION RADIO ON OFF ON

Electronics and Information Technology Industries Association).

” flashes.

t t t

Notes

remaining battery power. One section does not always indicate one-fourth of the battery power.

sections of

with new ones.

may increase or decrease.

Notes

Compact Disc Digital Audio (Audio CD) format, but playback capability may vary depending on the quality of the disc and the condition of the recording device.

the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

/search) once to find the beginning of the

find the beginning of the previous/ succeeding tracks. Press and hold . or > to go backward/forward quickly. For radio: Press to tune in the station you want. Also press to select the preset station you want.

mode. Also press to store the station in memory.

To play from the first track, press for 2 seconds or more while the CD player is stopped.

• Also press to enter the selection.

CD player or remote control to prevent accidental button presses. HOLD on the CD player works only for the player, while HOLD on the remote control works only for the remote control.

current track.” Press twice to display “the number of tracks left and the time remaining on the CD.” Press three times to display “track number and elapsed playing time (normal display).”

• Also press to enter the menu and to enter the selection.

Button/Switch Function/Operation

8 P MODE/ For CD player: During play, press (play mode/repeat) repeatedly until the play mode you

9 SOUND*

q; x (stop) Press to stop playing. qa RADIO OFF Press to turn off the radio. qs VOL+/– Press to adjust the volume. qd Hook Use to hang the remote control on a

*1AMS = Automatic Music Sensor *2If you disconnect the power sources, all settings return to the

defaults.

*3If the sound is distorted when using the SOUND function,

turn down the volume.

*4AVLS = Automatic Volume Limiter System

want appears on the display. No indication: Normal play “1”: Single track play “SHUF”: Shuffle play “

”: Bookmark track play “PGM”: PGM (program) play To repeat the play mode you selected, press and hold until “ appears. For radio: Press to switch the tuning mode and the preset mode.

• Use to emphasize the bass-

boosted sound. Press repeatedly to select BASS

. BASS enhances

more than BASS

• Also use to keep down the

maximum volume to protect your hearing. Press and hold until

“AVLS*

” appears in the display. The AVLS function is turned on. To turn off the AVLS function, press and hold again until “AVLS” disappears.

knapsack, etc.

or BASS

To remove the CD

Remove the CD while pressing the pivot (E).

Playing your favorite tracks by adding Bookmarks

(Bookmark track play)

You can add Bookmarks to up to 99 tracks for each CD. You can use this function for up to 5 CDs.

To add Bookmarks 1 During playback of the track where you want to add a

Bookmark, press and hold u until “ (Bookmark)” flashes in the display. When the Bookmark has been added successfully, flashing of “

2 Repeat step 1 to add Bookmarks to the tracks you

want.

” becomes slow.

To listen to the tracks with Bookmarks

1 Press P MODE/ repeatedly until “ ” flashes. 2 Press u.

“

” lights up in the display and the playback of the

tracks with Bookmarks starts.

To remove the Bookmarks

During playback of the track with a Bookmark, press and hold u until “

” disappears from the display.

To check the tracks with Bookmarks

During playback of the tracks with Bookmarks, “ ” keeps flashing slowly in the display.

Notes

• During playback of the tracks with Bookmarks, tracks are played in order of track number, and not in the order you added the Bookmarks.

• If you try to add Bookmarks to the tracks on the 6th CD, the Bookmarks of the CD you played back first will be erased.

• If you remove all power sources, all Bookmarks stored in memory will be erased.

Playing tracks in your favorite order (PGM play)

You can program the CD player to play up to 64 tracks in your favorite order.

1 During playback, press P MODE/ repeatedly until

“PGM” appears.

2 Press . or > to select a track. 3 To enter the selected track, press and hold u until

the playing order increases by one. “00” appears and the playing order increases

by one.

4 Repeat steps 2 and 3 to select the tracks in your

favorite order.

5 Press u to start PGM play.

To check the program

During programming:

Press and hold u repeatedly before step 5.

During the PGM play:

Press P MODE/ press and hold u repeatedly. Each time you press u, the track number appears.

Notes

•When you finish entering the 64th track in step 3, the first selected track appears in the display.

• If you select more than 64 tracks, the first selected tracks are erased.

repeatedly until “PGM” flashes, then

”

Listening to the radio

1 Press RADIO ON to turn on the radio. 2 Press BAND until the band you want appears.

Each time you press the button, the display changes as follows:

t FM t AM t TV t WB

3 Press TUNE + or – (. or > on the remote

control) to tune in the station you want and adjust the volume.

Tuning mode and Preset mode

To switch the tuning mode and the preset mode, use P MODE/ When the preset number appears in the display, the CD player is in the preset mode and you can use PRESET + or – to select the preset number. To enter the tuning mode, press P MODE/ preset number disappear from the display. Use TUNE + or – (. or > on the remote control) to tune in the station.

to make the

To turn off the radio

Press x•RADIO OFF. (Press and hold x•RADIO ON/ BAND•RADIO OFF on the remote control.)

To tune in the station quickly

Press and hold TUNE + or – in step 3 until the frequency digits begin to change in the display. The CD player automatically scans the radio frequencies and stops when it finds a clear station.

To improve broadcast reception

For TV/WB/FM, extend the headphones cord.

Headphones or earphones

For AM, reorient the CD player itself.

Note

Keep the headphones connected to the i jack of the CD player. The headphones cord works as the FM/TV/WB antenna.

If it is hard to hear the FM broadcast

Press and hold PLAY MODE/ until “LOCAL” appears in the display. Under the normal conditions, press and hold PLAY MODE/ display.

until “LOCAL” disappears from the

When listening to the radio on batteries

If you connect the external power source plug to the DC IN 4.5 V jack of your CD player, the CD player will turn off. Turn it on by pressing RADIO ON to continue listening to it.

Presetting radio stations

You can preset up to 51 stations: 30 for FM, 10 for AM, 7 for TV, and 4 for WB.

1 Press RADIO ON to turn on the radio. 2 Press BAND to select the band. 3 Press TUNE + or – (. or > on the remote

control) to tune in the station you want.

4 Hold down MEMORY until “PRESET” flashes in the

display. From this step on, start the next operation within 30

seconds after you finished the previous operation. If 30 seconds pass with nothing done, “PRESET” stops flashing which shows that the CD player has exited the PRESET MEMORY standby mode. If this happens, start from step 4 again.

5 Press PRESET + or – repeatedly to select the preset

number you want to store the station on while “PRESET” flashes.

6 Press MEMORY.

When the station is preset successfully, the beep sounds and “PRESET” stops flashing in the display. The new station replaces the old one.

To preset another station, press PLAY MODE/ and repeat steps 2 to 6.

To exit the PRESET MEMORY standby mode

When the radio is turned on, you can exit the PRESET MEMORY standby mode using one of the following procedures. Preset stations, however, will remain stored in the CD player’s memory.

• Hold down MEMORY until “PRESET” stops flashing.

• Do not press any button for 30 seconds. “PRESET” stops flashing.

• Press x•RADIO OFF. (Press and hold x•RADIO ON/ BAND•RADIO OFF on the remote control.) The radio turns off.

To cancel all preset stations

1 Disconnect the power source (alkaline batteries, AC

power adaptor).

2 While you press and hold down MEMORY, insert

alkaline batteries or connect the AC power adaptor again. The indications in the display keep flashing until all preset stations are cleared, then stop flashing and disappear from the display.

Playing preset radio stations

1 Press BAND to select the band. 2 Switch your CD player to the preset mode*, then

press PRESET + or – to tune in a stored station. *For details, refer to “Tuning mode and Preset mode.”

Other functions

You can make the following settings using the menu.

The timer function

You can set the CD player to stop playback automatically within a range of 5 to 95 minutes at 5 minute intervals. When the CD player is playing and the timer function is activated, the track number flashes on the display.

The G-PROTECTION function

This function has been developed to provide excellent protection against sound skipping during many active uses.*

Turning off the beep sound

You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player.

Changing the tuning interval

When using the CD player abroad, change the AM tuning interval, if necessary.*

9 kHz area: Asia and Europe 10 kHz area: the U.S.A., Canada and South America

*1 When listening to the radio, this function does not work. *2 Sound may skip:

– if the CD player receives stronger continuous shock than

expected, – if a dirty or scratched CD is played or – when using poor-quality CD-Rs/CD-RWs or if there is a

problem with the recording device or application

software.

*3 The interval will not change until you turn off the radio

once and then turn it on again.

*4 After changing the tuning interval, you need to preset radio

stations again.

3, *4

How to set 1 While play is stopped, press DISPLAY/MENU until

“t-SEt” appears. From this step on, start the next operation within 15

seconds after you finish the previous operation. If the indications on the display disappear, start from step 1 again.

2 Press . or > to select the Menu 1 item, then

press DISPLAY/MENU or u. Menu 2 item starts flashing.

3 Press . or > to select the Menu 2 item, then

press DISPLAY/MENU or u to enter the selection. When the item has been entered properly, the item

stops flashing.

To return to the previous screen, press x. To cancel the setting operation, press and hold x.

List of menus

Setting Menu 1 , Menu 2

Timer* t-SEt – –

G-PROTECTION SEt on

Turning off the bEEP b on beep sound b off

Changing the tuning StEP AM 9kHz interval AM 10kHz

* You can set this item during both play and stop. When

listening to the radio, this function does not work.

The time set is estimated.

05 : : 95

off

Note

If you disconnect the power sources, all settings return to the defaults.

Precautions

On safety

• Should any solid objects or liquid fall into the CD player, unplug it and have it checked by qualified personnel before operating it any further.

• Do not put any foreign objects in the DC IN 4.5 V (external power input) jack.

On power sources

• When you are not using the CD player for a long time, disconnect all power sources from the CD player.

On AC power adaptor

• Use only the AC power adaptor supplied. If your CD player is not supplied with it, use the AC-E45HG AC power adaptor. Do not use any other AC power adaptor. It may cause a malfunction.

Polarity of the plug

• Do not touch the AC power adaptor with wet hands.

• Connect the AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in the AC power adaptor, disconnect it from the AC outlet immediately.

On dry batteries

• Do not throw the batteries into fire.

• Do not carry the batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery are accidentally contacted by a metallic object.

• Do not mix new batteries with old ones.

• Do not use different types of batteries together.

• When the batteries are not to be used for a long time, remove them.

• If battery leakage occurs, wipe off any deposit in the battery compartment, and install new batteries. In case the deposit adheres to you, wash it off thoroughly.

On the CD player

• Keep the lens on the CD player clean and do not touch it. If you do so, the lens may be damaged and the CD player will not operate properly.

• Do not put any heavy object on top of the CD player. The CD player and the CD may be damaged.

• Do not leave the CD player in a location near heat

sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed.

• If the CD player causes interference to the radio or television reception, turn off the CD player or move it away from the radio or television.

• Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this CD player. Attempting to do so may damage the CD player. Do not use such discs.

Power requirements

• Two LR6 (size AA) batteries: 1.5 V DC × 2

• AC power adaptor (DC IN 4.5 V jack): 220 V, 50 Hz (Model for China) 120 V, 60 Hz (Model for Mexico)

Dimensions (w/h/d) (without projecting parts and controls)

Approx. 135,8 × 24.3 × 135.8 mm (5 3⁄

× 31⁄32 × 5 3⁄8 in.)

Mass (excluding accessories)

Approx. 191 g (6.8 oz)

Operating temperature

5°C - 35°C (41°F - 95°F)

Design and specifications are subject to change without notice.

Supplied Accessory

Headphones/earphones with remote control (1)

For the area code of the model you purchased, check the upper left side of the bar code on the package.

On headphones/earphones

Road safety

Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.

Preventing hearing damage

Avoid using headphones/earphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.

Consideration for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you.

This warranty is valid only in the United States.

Maintenance

To clean the casing

Use a soft cloth slightly moistened in water or a mild detergent solution. Do not use alcohol, benzine or thinner.

To clean the plugs

If the plugs become dirty, there is no audio or noise is heard. Clean them with a dry soft cloth periodically.

Troubleshooting

Should any problem persist after you have made these checks, consult your nearest Sony dealer.

“Hold” appears in the display when you press a button, and the CD does not play.

c The buttons are locked. Slide HOLD back.

The volume does not increase even if you press VOL + repeatedly.

c Press and hold SOUND until “AVLS” disappears from

the display.

The battery compartment lid is dettached by an accidental drop, excessive force, etc.

c Attach it as illustrated below.

Specifications

System

Compact disc digital audio system

Laser diode properties

Material: GaAlAs Wavelength: l = 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.)

Frequency range (10k/9k)

10 kHz step:

TV: 2 - 13 ch WB (weather band): 1 - 7 ch FM: 87.5 - 108.0 MHz AM: 530 - 1 710 kHz

9 kHz step:

TV: 2 - 13 ch WB (weather band): 1 - 7 ch FM: 87.5 - 108.0 MHz AM: 531 - 1 710 kHz