Sony DCR-DVD100,DCR-DVD100E,RMT-820 Service Manual

DCR-DVD100/DVD100E

RMT-820

US Model

Canadian Model

DCR-DVD100

AEP Model

UK Model

East European Model

Hong Kong Model

Australian Model

DCR-DVD100E

E Model

DCR-DVD100/DVD100E

SERVICE MANUAL

Digital Video Camera Recorder

LEVEL 2

• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987627341.pdf).

• Since a service is provided only for the MD-097 BLOCK ASSY (A-7111-651-A) and
not for the single MD-097 board, complete.

• Reference No. search on printed wiring boards is available.

Link

SERVICE NOTE

DISASSEMBLY

BLOCK DIAGRAMS

FRAME SCHEMATIC DIAGRAMS

SCHEMATIC DIAGRAMS

PRINTED WIRING BOARDSSPECIFICATIONS

REPAIR PARTS LIST

SERVICE NOTE

DISASSEMBLY

BLOCK DIAGRAMS

FRAME SCHEMATIC DIAGRAMS

SCHEMATIC DIAGRAMS

PRINTED WIRING BOARDS

REPAIR PARTS LIST

SPECIFICATIONS

Link

Revision History

Revision History

Ver 1.1 2003. 12

On the MD-097, SS-174T and VC-307 board

This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the MD-097, SS-174T and VC-307 board.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the

MD-097,

SS-174T and VC-307

board are not shown.

The following pages are not shown.

Disassembly...................................... Pages 2-24 to 2-26

Schematic diagram ........................... Pages 4-27 to 4-76

Printed wiring board.......................... Pages 4-95 to 4-102

Waveforms ..........................................

Pages 4-105 to 4-106

Mounted parts location .........................

Pages 4-109 to 4-111

Exploded views....................................Pages 5-11 to 5-12

Electrical parts list................................Pages 5-16 to 5-30

How to use

Acrobat Reader

How to use

Acrobat Reader

Photo: DCR-DVD100

— 2 —

DCR-DVD100/DVD100E

SPECIFICATIONS

COVER

COVER

Video camera
recorder

System

Video recording format

DVD-Video
DVD-VR (DVD-RW only)

Audio recording system

2ch Dolby* Digital

Video signal

NTSC color, EIA standards
DCR-DVD100E :
PAL colour, CCIR standards

Usable discs

8 cm DVD-R and DVD-RW

Video compression format

MPEG2/JPEG (Still images)
Recording/playback time
HQ: Approx. 20 minutes
SP: Approx. 30 minutes
LP: Approx. 60 minutes

Viewfinder

Electric viewfinder (color)

Image device

4.5 mm (1/4 type) CCD (Charge
Coupled Device)

DCR-DVD100 :
Gross: Approx. 680 000 pixels

Lens

Carl Zeiss
Combined power zoom lens
Filter diameter:
30 mm (1 3/16 in.)
10× (Optical), 120× (Digital)
F = 1.7 – 2.2

Focal length

3.3 – 33 mm (5/32 – 1 5/16 in.)
When converted to a 35 mm still
camera
42 – 420 mm (1 11/16 – 16 5/8 in.)

Color temperature

Auto, HOLD (Hold), nIndoor
(3 200 K),

Outdoor (5 800 K)

Minimum illumination

5 lx (lux) (F 1.7)
0 lx (lux) (in the NightShot mode)*

* Objects unable to be seen due to

the dark can be shot with
infrared lighting.

Input/Output connectors

S video input/output

4-pin mini DIN
Luminance signal: 1 Vp-p, 75 Ω
(ohms), unbalanced

Audio/Video input/output

AV MINI JACK, 1 Vp-p, 75 Ω
(ohms), unbalanced, sync negative

327 mV, (at output impedance of
more than 47 kΩ (kilohms))
Output impedance of less than 2.2
kΩ (kilohms)/Stereo minijack (ø

3.5 mm)
Input impedance of more than
47 kΩ (kilohms)

USB jack

mini-B

Control jack

Stereo mini-minijack (ø 2.5 mm)

MIC jack

Stereo minijack (ø 3.5 mm)

LCD screen

Picture

6.2 cm (2.5 type)

Total number of pixels

123 200 (560 × 220)

General

Power requirements

7.2 V (battery pack)

8.4 V (AC adaptor)

Average power consumption
(when using the battery pack)

During camera recording using
LCD

6.5 W
Viewfinder

5.5 W

Operating temperature

0°C to 40°C (32°F to 104°F)

Storage temperature

–20°C to + 60°C
(–4°F to + 140°F)

Dimensions (Approx.)

66 × 94 × 142 mm
(2 5/8 × 3 3/4 × 5 5/8 in.)
(w/h/d)

Mass (approx.)

640 g (1 lb 6 oz)
main unit only
730 g (1 lb 9 oz)
including the battery pack,
disc and lens cap

Supplied accessories

See page 5-32.

* Manufactured under license

from Dolby Laboratories.
“Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.

AC adaptor
AC-L15A

Power requirements

100 – 240 V AC, 50/60 Hz

Current consumption

0.35 – 0.18 A

Power consumption

18 W

Output voltage

DC OUT: 8.4 V, 1.5 A in the
operating mode

Operating temperature

0°C to 40°C (32°F to 104°F)

Storage temperature

–20°C to + 60°C (–4°F to + 140°F)

Dimensions (approx.)

56 × 31 × 100 mm
(2 1/4 × 1 1/4 × 4 in.) (w/h/d)
excluding projecting parts

Mass (approx.)

190 g (6.7 oz)
excluding power cord

Rechargeable
battery pack
NP-FM50

Maximum output voltage

DC 8.4 V

Output voltage

DC 7.2 V

Capacity

8.5 Wh (1 180 mAh)

Dimensions (approx.)

38.2 × 20.5 × 55.6 mm
(1 9/16 × 13/16 × 2 1/4 in.)
(w/h/d)

Mass (approx.)

76 g (2.7 oz)

Operating temperature

0°C to 40°C (32°F to 104°F)

Type

Lithium ion

Design and specifications are
subject to change without notice.

Chrominance signal:
DCR-DVD100: 0.286 Vp-p
DCR-DVD100E: 0.3 Vp-p
75 Ω(ohms), unbalanced

Number of Pixels

DCR-DVD100E :
Gross: Approx. 800 000 pixels
Effective :

Approx. 340 000 pixels

DCR-DVD100 :

DCR-DVD100E :
Approx. 400 000 pixels

DCR-DVD100 :

— 3 —

DCR-DCVD100/DVD100E

1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.

2. Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.

4. Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.

5. Check the B+ voltage to see it is at the values specified.

6. Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C
during repairing.

• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering
or unsoldering.

Unleaded solder

Boards requiring use of unleaded solder are printed with the lead­free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

• Unleaded solder melts at a temperature about 40°C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!

• Strong viscosity
Unleaded solder is more viscous (sticky , less prone to flo w) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.

• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

CAUTION :

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

WARNING!!

WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.

CAUTION:

The use of optical instrument with this product will increase eye
hazard.

CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.

— 4 —

DCR-DVD100/DVD100E

TABLE OF CONTENTS

1. SERVICE NOTE

1-1. SERVICE NOTE ·····························································1-1

1. POWER SUPPLY DURING REPAIRS ··························1-1

2. TO TAKE OUT A CASSETTE WHEN NOT EJECT
(FORCE EJECT) ·····························································1-1

3. NOTES ON HANDLING THE OPTICAL PICK-UP ····1-1

4. PRECAUTION FOR CHECKING EMISSION
OF LASER DIODE·························································1-1

1-2. SELF-DIAGNOSIS FUNCTION····································1-2

1. SELF-DIAGNOSIS FUNCTION····································1-2

2. SELF-DIAGNOSIS DISPLAY ······································· 1-2

3. SELF-DIAGNOSIS CODE TABLE································1-2

2. DISASSEMBLY

2-1. F PANEL SECTION ·······················································2-2
2-2. MA-420 BOARD ····························································2-2
2-3. CABINET (R) SECTION ···············································2-3
2-4. SIDE CABINET (25) ASSEMBLY ································2-4
2-5. P CABINET (C)(25M) ASSEMBLY ······························2-5
2-6. LCD UNIT ······································································2-6
2-7. PD-188 BOARD······························································2-6
2-8. LIQUID CRYSTAL INDICATOR MODULE················2-7
2-9. LCD HINGE ASSEMBLY·············································· 2-7
2-10. CK-127 BOARD ·····························································2-8
2-11. FB-220 BOARD ······························································2-8
2-12. LOUD SPEAKER (1.6 cm)·············································2-9
2-13. TRIPOD (LARGE)··························································2-9
2-14. CONTROL SWTICH BLOCK (KP-CX5500),

CABINET (R) (25) ASSEMBLY··································2-10

2-15. BATTERY PANEL SECTION ······································2-10
2-16. EVF SECTION······························································2-11
2-17. LB-084 BOARD (REMOVING OF THE EVF)-1········2-12
2-18. LB-084 BOARD (REMOVING OF THE EVF)-2········2-13
2-19. LB-084 BOARD (REMOVING OF THE EVF)-3········2-14
2-20. LENS SECTION ···························································2-15
2-21. LENS DEVICE (LSV-650E)·········································2-16
2-22. VC-307 BOARD ···························································2-17
2-23. MD-097 BLOCK ASSEMBLY ·····································2-19
2-24. CONTROL SWITCH BLOCK (PS-CX5500) ·············· 2-20
2-25. FP-609 FLEXIBLE BOARD ········································2-21
2-26. CIRCUITE BOARDS LOCATION ······························2-22
2-27. FLEXIBLE BOARDS LOCATION ······························2-23

Disassembling procedure of MD-097 block assembly
are not shown. Pages from 2-24 to 2-26 are not shown.

HELP (List of caution points is shown here.)

3. BLOCK DIAGRAMS

3-1. OVERALL BLOCK DIAGRAM (1/4) ··························· 3-1
3-2. OVERALL BLOCK DIAGRAM (2/4) ··························· 3-3
3-3. OVERALL BLOCK DIAGRAM (3/4) ··························· 3-5
3-4. OVERALL BLOCK DIAGRAM (4/4) ··························· 3-7
3-5. POWER BLOCK DIAGRAM (1/3) ································ 3-9
3-6. POWER BLOCK DIAGRAM (2/3) ······························3-11
3-7. POWER BLOCK DIAGRAM (3/3) ······························3-13

4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS

4-1. FRAME SCHEMATIC DIAGRAM (1/3)······················· 4-1

FRAME SCHEMATIC DIAGRAM (2/3)······················· 4-3
FRAME SCHEMATIC DIAGRAM (3/3)······················· 4-5

4-2. SCHEMATIC DIAGRAMS

• CD-428 (CCD IMAGER)
SCHEMATIC DIAGRAM ····························4-11

• FP-609 FLEXIBLE
SCHEMATIC DIAGRAM ····························4-12

• PD-188 (1/2)(LCD DRIVE)
SCHEMATIC DIAGRAM ····························4-13

• PD-188 (2/2)(BACKLIGHT DRIVE)
SCHEMATIC DIAGRAM ····························4-15

• LB-084 (EVF CONNECTOR, EVF BACK LIGHT)
SCHEMATIC DIAGRAM ····························4-17

• FP-608 (USB, LANC) FLEXIBLE
SCHEMATIC DIAGRAM ····························4-18

• MA-420 (PITCH/YAW SENSOR, REMOTE SENSOR,

MIC)

SCHEMATIC DIAGRAM ····························4-19

• CK-127 (CONNECTOR, FUNCTION SWITCH)
SCHEMATIC DIAGRAM ····························4-21

• FB-220 (FUNCTION SWITCH)
SCHEMATIC DIAGRAM ····························4-23

• FP-610 (EXT MIC) FLEXIBLE
SCHEMATIC DIAGRAM ····························4-23

• CONTROL SWITCH BLOCK

(KP-CX5500, PS-CX5500)

SCHEMATIC DIAGRAM ····························4-25

Shematic diagram of the MD-097, SS-174T and VC­307 board are not shown.
Pages from 4-27 to 4-78 are not shown.

• FP-611 (AUDIO/VIDEO JACK) FLEXIBLE
SCHEMATIC DIAGRAM ····························4-79

4-3. PRINTED WIRING BOARDS

• CD-428 (CCD IMAGER)
PRINTED WIRING BOARD ·······················4-83

• PD-188 (LCD DRIVE, BACKLIGHT DRIVE)
PRINTED WIRING BOARD ·······················4-85

• LB-084 (EVF CONNECTOR, EVF BACK LIGHT)
PRINTED WIRING BOARD ·······················4-87

• FB-220 (FUNCTION SWITCH)
PRINTED WIRING BOARD ·······················4-87

• MA-420 (PITCH/YAW SENSOR, REMOTE SENSOR,

MIC)

PRINTED WIRING BOARD ·······················4-89

• CK-127 (CONNECTOR, FUNCTION SWITCH)
PRINTED WIRING BOARD ·······················4-91

• FP-612 (PANEL REVERSE) FLEXIBLE
PRINTED WIRING BOARD ·······················4-91

• FP-608 (USB, LANC) FLEXIBLE
PRINTED WIRING BOARD ·······················4-93

• FP-609 (PLUNGER, EJECT) FLEXIBLE
PRINTED WIRING BOARD ·······················4-93

• FP-610 (EXT MIC) FLEXIBLE
PRINTED WIRING BOARD ·······················4-93

• FP-611 (AUDIO/VIDEO JACK) FLEXIBLE
PRINTED WIRING BOARD ·······················4-93

Printed wiring board of the MD-097, SS-174T and
VC-307 board are not shown.
Pages from 4-95 to 4-104 are not shown.

4-4. WAVEFORMS ···························································· 4-105

Waveforms of the VC-307 board is
not shown.
Pages from 4-106 to 4-107 are not shown.

4-5. MOUNTED PARTS LOCATION ······························· 4-107

Mounted parts location of the MD-097, SS-174T and
VC-307 are not shown.
Pages from 4-110 to 4-114 are not shown.

— 5 —

DCR-DVD100/DVD100E

5. REPAIR PARTS LIST

5-1. EXPLODED VIEWS ······················································5-3
5-1-1.OVERALL SECTION·····················································5-3
5-1-2.F PANEL AND BATTERY PANEL SECTION ··············5-4
5-1-3.LENS SECTION ·····························································5-5
5-1-4.EVF SECTION································································5-6
5-1-5.MD SECTION·································································5-7
5-1-6.CABINET (L) SECTION················································5-8
5-1-7.CABINET (R) SECTION ···············································5-9
5-1-8.LCD SECTION ·····························································5-10

Exploded view and parts list of MD-097 BLOCK are
not shown. Page 5-11 and 5-12 are not shown.

5-2. ELECTRICAL PARTS LIST ········································5-12

Electrical parts list of the MD-097, SS-174T and VC­307 board are not shown.
Pages from 5-17 to 5-31 are not shown.

1-1

DCR-DVD100/DVD100E

SECTION 1

SERVICE NOTE

COVER

COVER

1-1. SERVICE NOTE

1. POWER SUPPLY DURING REPAIRS

In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the po wer is shut of f so
that the unit cannot operate.
This following two methods are available to prevent this. Take note of which to use during repairs.

Method 1.

Use the AC power adaptor (AC-L15, AC-VQ800 etc.).

Method 2.

Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the “ADJ” side.

2. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1 Refer to page 2-2 to remove the front panel assembly.
2 Refer to page 2-3 to remove the cabinet (R) assembly.
3 Refer to page 2-10 to remove the battery panel section.
4 Refer to page 2-11 to remove the EVF block.
5 Remove the VC-307 board.
6 Refer to page 2-15 to remove the lens block and the accessory shoe.
7 While pushing the portion A in the direction of the arrow, push the OPEN switch in the direction of the arrow and open the disc cover.

3. NOTES ON HANDLING THE OPTICAL PICK-UP

The laser diode may suffer electrostatic breakdown because of the
potential difference generated by the charged electrostatic load, etc.
on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.

4. PRECAUTION FOR CHECKING EMISSION OF
LASER DIODE

Laser light of the equipment is focused by the object lens in the
optical pick-up so that the light focuses on the reflection surface of
the disc. Therefore, be sure to keep your eyes more then 30 cm
apart from the object lens when you check the emission of laser
diode.

MD-097 board

Plunger

Open switch

A

1-2E

DCR-DVD100/DVD100E

1-2. SELF-DIAGNOSIS FUNCTION

1. SELF-DIAGNOSIS FUNCTION

When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder, or LCD
screen what to do. This function consists of two display; self­diagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.

2. SELF-DIAGNOSIS DISPLAY

When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen consists of an alphabet and 4-digit number ,
which blinks at 3.2Hz. This 5-character display indicates the
“repaired by:”, “block” in which the problem occurred, and “detailed
code” of the problem.

Note: The “self-diagnosis display” data will be kept even if the lithium battery (CK-127 board BT5201 of the cabinet (R) assembly) is removed.

1 1

3 1C

Repaired by:

Self-diagnosis Code Table.

Indicates the appropriate
step to be taken.
E.g.

31 ....Reload the disc.

32 ....Turn on power again.

Block

Detailed Code

Blinks at 3.2Hz

C : Corrected by customer
H : Corrected by dealer
E : Corrected by service

engineer

Viewfinder or LCD screen

C : 3 1 : 1 1

3. SELF-DIAGNOSIS CODE TABLE

C
C
C
E

E

E

E

E

E

Block

Function

04
13
21
20

61

61

62

93

94

Detailed

Code

00
00
00
00

00

10

00

00

01

Symptom/State

Non-standard battery is used.
Faulty disc is used.
Condensation.
EEPROM data are rewritten.

Difficult to adjust focus
(Cannot initialize focus.)

Zoom operations fault
(Cannot initialize zoom lens.)

Handshake correction function does not
work well. (With pitch angular velocity
sensor output stopped.)

USB bridge IC fault
Fault of writing to or erasing the flash

memory

Self-diagnosis Code

Repaired by:

Correction

Use the InfoLITHIUM battery.
Use a compatible disc with the camcorder.
Remove the disc, and insert it again after one hour.
Make EEPROM data correct value. (Note)
Inspect the lens block focus reset sensor (Pin 7 of CN1201 of VC-

307 board) when focusing is performed when the control dial is rotated
in the focus manual mode and inspect the focus motor drive circuit
(IC1203 of VC-307 board) when the focusing is not performed.

Inspect the lens block zoom reset sensor (Pin qh of CN1501 of
VC-307 board) when zooming is performed when the zoom switch
is pressed and inspect the zoom motor drive circuit (IC1203 of
VC-307 board) when the zooming is not performed.

Inspect angular velocity sensors (SE5501, 5502 of MA-420
board) peripheral circuits.

Inspect the USB bridge IC (MD-097 board IC4202) and EEPROM
(MD-097 board IC4201)

Inspect the flash memory (VC-307 board IC3401) (Note)

Note: Refer to “8. Record of Self-diagnosis check” of “6-3. SERVICE

MODE”, ADJ (987627351.pdf).

2-1

SECTION 2

DISASSEMBLY

DCR-DVD100/DVD100E

COVER

COVER

HELP

HELP

The following flow chart shows the disassembly procedure.

VC-307

MD-097

P

D

-1

8

8

VC-307

SERVICE POSITION TO CHECK
THE DVD DRIVE SECTION

1 2-1. F PANEL SECTION .....................................

2 2-3. CABINET (R) SECTION ..............................

3 2-15. BATTERY PANEL SECTION........................

4 2-16. EVF SECTION..............................................

5 2-20. LENS SECTION...........................................

6 2-22. VC-307 BOARD............................................

7 SERVICE POSITION TO CHECK

THE DVD DRIVE SECTION..................................

(page 2-2)

(page 2-3)

(page 2-10)

(page 2-11)

(page 2-15)

(page 2-17)

(page 2-18)

PROCEDURE OF REMOVING THE VC-307 BOARD.
(SERVICE POSITION TO CHECK THE DVD DRIVE SECTION)

DISASSEMBLY

DISASSEMBLY

DISASSEMBLY

DISASSEMBLY DISASSEMBLY

DISASSEMBLY

DISASSEMBLY

PD-188 board
service position

2-2

DCR-DVD100/DVD100E

NOTE: Follow the disassembly procedure in the numerical order given.

2-1. F PANEL SECTION

3

Open the jack cover (F)

2

Screw (M1.7 × 4),

lock ace, p2 (black)

7

F panel section

4

Screw (M1.7 × 4),

lock ace, p2 (black)

5

Screw (M1.7 × 4),

lock ace, p2 (black)

6

FP-605 flexible board

(22P)

1

Screw (M1.7 × 4),

lock ace, p2 (black)

The FP-605 flexible board may be damaged
if you remove the F panel section forcibly.
Be very careful not to damage the flexible
board.

Caution

2-2. MA-420 BOARD

MA-420

2

Three tapping screws

(M1.7

×

3.5)

1

Microphone unit

(4P)

3

MA-420 board

2-3

DCR-DVD100/DVD100E

2-3. CABINET (R) SECTION

VC-307

1

Open the jack cover (U)

8

FP-602 flexible board

(39P)

q;

FP-602 flexible board

(39P)

5

Three screws (M1.7 × 4),

lock ace, p2 (black)

6

Two screws (M1.7 × 4),

lock ace, p2 (black)

2

Two screws (M1.7 × 4),

lock ace, p2 (black)

3

Screw (M1.7 × 4),

lock ace, p2 (black

)

9

Cabinet (R) section

The FP-602 flexible board may be damaged
if you remove the cabinet (R) section forcibly.
Be very careful not to damage the flexible
board.

Caution

4

Two screws (M1.7 × 4),

lock ace, p2 (black)

7

CPC lid (bottom)

2-4

DCR-DVD100/DVD100E

2-4. SIDE CABINET (25) ASSEMBLY

CK-127

CK-127

3

Set the LCD panel,

as shown in the figure.

5

Side cabinet (25) assembl

y

1

Three tapping

screws (M1.7

×

5)

4

2

Screw (M1.7 × 4),

lock ace, p2 (black)

2-5

DCR-DVD100/DVD100E

2-5. P CABINET (C)(25M) ASSEMBLY

PD-188

PD-188

VC-307

1

Screw (M1.7 × 4),

lock ace, p2 (silver)

2

Screw (M1.7 × 4),

lock ace, p2 (silver)

4

P cabinet (C) (25) assembly

3

Five claws

[PD-188 BOARD SERVICE POSITION]

Adjustment remote
commander (RM-95)

CPC-8 jig
(J-6082-388-A)

LANC jack

AC power
adaptor

AC I

N

DC-IN connector

VC-307 board

PD-188 board

2-6

DCR-DVD100/DVD100E

2-6. LCD UNIT

CK-127

CK-127

3

FP-612 flexible

board (6P)

4

PV-018 harness

(20P)

2

Tape (HS)

Tape (HS)

1

Close the LCD panel.

5

Two screws

(M1.7

×

4),

grip

7

LCD unit

6

Caution

Attach the Tape (HS)
as shown in the illustration.

2-7. PD-188 BOARD

PD-188

1

Two screws
(M1.7 × 4),
lock ace, p2 (silver)

2

Two screws
(M1.7 × 4),
lock ace, p2 (silver)

3

Five claws

q;

Two claws

4

P cabinet (C) (25M) assembly

6

Liquid crystal

indicator module

5

Back light
Cold cathode
fluorescent tube

7

PV-018 harness

(20P)

8

Hinge assembly

qa

PD-188 board

9

Screw
(M1.7 × 2.5)
lock ace, p2

2-7

DCR-DVD100/DVD100E

2-8. LIQUID CRYSTAL INDICATOR MODULE

1

P frame assembly (25)

2

P lock button

4

Claw

3

P lock spring

7

P cabinet (M) (25)

6

Liquid crystal

indicator module

5

Back light
Cold cathode
fluorescent tube

2-9. LCD HINGE ASSEMBLY

2

Screw

(M1.7

×

2.5)

lock ace, p2

1

3

Claw

5

Claw

4

Hinge cover (U) (25

)

6

Hinge cover (O) (25)

7

FP-612 flexible board

8

PV-018

harness

9

LCD Hinge

assembly

2-8

DCR-DVD100/DVD100E

2-10.CK-127 BOARD

CK-127

2

Loud speaker (1.6 cm) (2P)

4

Five tapping

screws (M1.7

×

3.5)

5

CK-127 board

3

Control switch block

(KP-CX5500) (6P)

1

FP-607 flexible board (6P)

2-11.FB-220 BOARD

FB-220

4

Three tapping

screws (M1.7

×

3.5)

6

2

FP-607 flexible

board (6P)

FP-607 flexible board

1

Tape (0716)

9

FP-610 flexible

board (6P)

7

FB muffle sheet

3

Screw

(M1.7

×

2.5)

lock ace, p2

5

Open the jack cover (U)

q;

Screw

(M1.7

×

2.5

)

lock ace, p2

8

Screw

(M1.7

×

2.5)

lock ace, p2

qa

FB retainer sheet metal

qs

FB-220 board

Tape (0716)

Caution

Attach the Tape (0716)
as shown in the illustration.

2-9

DCR-DVD100/DVD100E

2-12.LOUD SPEAKER (1.6 cm)

Caution

Attach the Tape (0716) as shown
in the illustration.

1

Tape (0716)

Tape (0716)

4

Loud speaker (0.6 cm)

Loud speaker (0.6 cm)

3

Speaker retainer (25)

2

Screw

(M1.7

×

2.5)

2-13.TRIPOD (LARGE)

1

Three screws

(M1.7

×

4),

grip

3

Bottom frame

4

Tripod (large)

2

Two tapping screws

(M1.7

×

3.5)

2-10

DCR-DVD100/DVD100E

2-14.CONTROL SWTICH BLOCK (KP-CX5500), CABINET (R) (25) ASSEMBLY

1

Two tapping

screws (M1.7

×

5)

2

Control switch block (KP-CX5500)

3

Cabinet (R) (25) assembly

2-15.BATTERY PANEL SECTION

VC-307

4

Screw (M1.7 × 4),

lock ace, p2 (black)

3

Screw

(M1.7 × 2.5),
lock ace, p2

6

Battery panel section

1

Battery terminal board

(6P)

5

Claw

2

Raise the Finder.

2-11

DCR-DVD100/DVD100E

2-16.EVF SECTION

VC-307

1

FP-603 flexible board

(20P)

5

EVF section

4

Screw (M1.7 × 4),

lock ace, p2 (black)

3

Screw (M1.7 × 4),

lock ace, p2 (black)

2

Raise the EVF

2-12

DCR-DVD100/DVD100E

2-17.LB-084 BOARD (REMOVING OF THE EVF)-1

7

Eye cup (55)

assembly

6

Screw

(M1.7

×

2.5),

lock ace, p2

FP-603 flexible
board

3

Screw

(M1.7 × 4),
lock ace, p2
(black)

5

Screw

(M1.7 × 2.5),
lock ace, p2

4

VF hinge assembly,

VF tilt cabinet

When installing the VF blind, fold the FP-603 flexible
board as shown in the illustration.

Caution

1

Two claws

2

VF blind

2-13

DCR-DVD100/DVD100E

2-18.LB-084 BOARD (REMOVING OF THE EVF)-2

2

2

A

A

B

C

3

5

4

2

Align the dotted portion of the VF slide assembly

with the dotted line of the VF slide cabinet (lower).

1

Tapping screw

(M1.7 × 3.5)

4

Tapping screw

(M1.7 × 3.5)

1

VF slide assembly

VF slide cabinet (upper) assembly

VF slide cabinet (upper) assembly

To raise the VF slide cabinet (upper)
assembly, insert a flat head
(-) screwdriver into the position shown
by the arrow.

VF slide cabinet (upper) assembly

When re-assembling, slide the
Visibility knob (40) to the fully
right-end beforehand.

3

Slide the VF slide cabinet assembly up to
the position in the direction of the arrow
where the two claws are locked.

RE-ASSEMBLING THE VF SLIDE CABINET

VF slide cabinet (lower)

VF slide cabinet (lower)

When re-assembling is completed,
the VF slide cabinet (upper) assembly
and the VF slide cabinet (lower) are
assembled as shown.

VF slide cabinet (lower)

VF slide cabinet (lower)

Two claws

VF slide cabinet (lower)

Visibility knob (40)

Visibility knob (40)

2

Open the lock of the VF slide cabinet (lower) in the direction of the arrow A,

3

while slanting the VF slide cabinet (upper) assembly in the direction

of the arrow

B

,

4

remove the Visibility knob (40) from the VF slide cabinet (lower), and

5

remove the VF slide cabinet (upper) assembly by sliding it in the direction

of the arrow

C

.

2-14

DCR-DVD100/DVD100E

2-19.LB-084 BOARD (REMOVING OF THE EVF)-3

qg

LCX032AN-5

qs

Lamp guide (40)

qa

Cushion LB (40)

8

FP-603

flexible board

7

Sheet (VF)

qk

LB-084 board

Projected part

q;

Two craws

qj

LCX032AN-5 (16P)

9

Two craws

qd

Illuminator (40)

qf

Prism sheet (40)

Cut-outs

3

Slide the VF slide cabinet assembly and others once
to the deep end, then slant them in the direction of
the arrow A to release the claw portion of the VF slide
assembly and finally pull them out in the direction of the
arrow B and remove them.

qh

LCD cabinet assembly

A

B

1

Two screws

(M1.7 × 2.5),
lock ace, p2

2

Pull out the VF slide assembly fully

in the direction of the arrow.

5

Screw

(M1.7 × 2.5),
lock ace, p2

6

Remove the LCD cabinet assembly and others from the two dowels and

cut-outs of the VF slide assembly.

4

Screw

(M1.7 × 2.5),
lock ace, p2

Two dowels

VF slide assembly

VF slide Cabinet (upper) assembly

VF slide assembly, etc.

FP-603 flexible
board

Caution

Sheet (VF)

When attach the Sheet (VF),
fold the FP-603 flexible board
as shown in the illustration.

Caution

Be careful not to drop
the Prism sheet (40) and
the Illuminator (40).

Caution

Be careful not to drop
the Cushion LB (40).

2-15

DCR-DVD100/DVD100E

2-20.LENS SECTION

VC-307

VC-307

2

Flexible board

(from the lens device)
(24P)

3

FP-606 flexible board

(27P)

4

FP-604

flexible board
(10P)

5

Harness (CV-068)

(2P)

6

CD heat transe holde

r

9

Lens section

8

Two screws (M1.7 × 4),

lock ace, p2 (black)

1

Screw (M1.7 × 4),

lock ace, p2 (black)

7

Two tapping screws

(M1.7

×

3.5)

q;

Water packing

Tapping screw (M1.7 × 3.5)

Screw (M1.7

×

4), lock ace, p2 (black)

2-16

DCR-DVD100/DVD100E

2-21.LENS DEVICE (LSV-650E)

7

FP-606 flexible board

(24P)

6

Harness (CV-068) (XXP)

9

Optical filter block

q;

Seal rubber (W)

qs

CCD block assembly

3

Outer connector (hot shoe),

Lens frame (650), etc

qg

Lens device (LSV-650E)

4

CD heat sink (650)

2

Screw

(M1.7

×

2.5),

lock ace, p2

5

Two tapping screws

(M1.7

×

5)

qd

CD-428 board

1

Two tapping screws

(M1.7

×

3.5)

8

CD radiation sheet

qa

Remove the soldering

CD radiation
sheet

Caution

qf

Lens (650) sheet

2-17

DCR-DVD100/DVD100E

2-22.VC-307 BOARD

VC-307

VC-307

MD-097

5

Control switch block

(PS-CX5500) (14P)

6

Three screws

(M1.7

×

2.5),

lock ace, p2

9

VC-307 board

8

Flexible retaine

r

cushion

Flexible retainer
cushion

3

Two screws

(M1.7

×

2.5),

lock ace, p2

4

FP-611 flexible board,

JK frame

2

FP-611 flexible board (8P)

1

FP-605 flexible board (22P)

7

Board to board connector

(100P)

q;

Heat sink,
sheet radiation (A),
sheet radiation (B)

Caution

Attach the flexible retainer
cushion as shown in the
illustration.

2-18

DCR-DVD100/DVD100E

[SERVICE POSITION TO CHECK THE DVD DRIVE SECTION]
Connection to Check the VTR Section

To check the DVD drive section, set the DVD drive to forced PLAY mode.
Operate the DVD drive using the adjustment remote commander (with the HOLD switch set in the OFF position).

Setting the forced PLAY mode

1) Select page: 0, address: 01, and set data: 01.

2) Select page: 0, address: 10, and set data: 00.

3) Select page: D, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.

Exiting the forced PLAY mode

1) Select page: 0, address: 01, and set data: 01.

2) Select page: 0, address: 10, and set data: 00.

3) Select page: D, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.

4) Select page: 0, address: 01, and set data: 00.

CN4901

CN4001

CN1008

CN1009

CN4902

VC-307

MD-097

VC-307 board

LANC jack

AUDIO/
VIDEO jack

Monitor TV

DC-IN jack

Extension cable (100P)
(J-6082-352-A)

AC power
adaptor

AC IN

CPC-8 jig
(J-6082-388-A)

Adjustment remote
commander (RM-95)

Battery panel section

1 2-1. F PANEL SECTION .....................................

2 2-3. CABINET (R) SECTION ..............................

3 2-15. BATTERY PANEL SECTION........................

4 2-16. EVF SECTION..............................................

5 2-20. LENS SECTION...........................................

6 2-22. VC-307 BOARD............................................

(page 2-2)

(page 2-3)

(page 2-10)

(page 2-11)

(page 2-15)

(page 2-17)

PROCEDURE OF REMOVING THE VC-307 BOARD.
(SERVICE POSITION) TO CHECK THE DVD DRIVE SECTION)

2-19

DCR-DVD100/DVD100E

2-23.MD-097 BLOCK ASSEMBLY

MD-097

MD-097

MD-097

4

Tape (0716)

2

Zoom blind

8

Three tapping screws

(M1.7 × 5)

7

Screw

(M1.7 × 2.5),
lock ace, p2

3

NS knob (650),

NS base (650)

5

FP-608

flexible board
(10P)

6

FP-609 flexible board

(8P)

9

MD-097 block assembly

Caution

Caution

Precautions during handling

Refer to level 3

Attach the Tape (0716)
as shown in the
illustration.

Disassembling procedure of
MD-097 block assembly.

Tape (0716)

FP-608 flexible board

1

Screw (M1.7 × 4),

lock ace, p2 (black)

Be sure to place the DVD drive with
its optical pickup facing upward.
Hold the frame.
Do not touch the optical pickup surface.

Optical pickup

Use the adjustable wrist strap (J-2501-162-A) as the preventive
measure for static electricity when the removing and installing
the drum assemb

ly because the drum assembly of this

mechanism beck is easily affected by the static electricity.

(J-2501-162-A)

Caution

2-20

DCR-DVD100/DVD100E

2-24.CONTROL SWITCH BLOCK (PS-CX5500)

ON
OFF

POWER

1

Tapping screw

(M1.7

×

3.5)

4

Three tapping screws

(M1.7

×

5)

3

Tape (0716)

5

Control switch block

(PS-CX5500)

Cabinet (L)

Control switch block
(PS-CX5500)

Align the hole of the receptacle with the projection of the
projected part, and install the Control switch block (PS-CX5500).

Receptacle hole

Mode dial

Projected part

Power switch

Mode dial

2

FP-608 flexible board

Caution

When installing the Control switch block (PS-CX5500),
set the power switch of cabinet (L) section to its
OFF position.

Caution

Caution

Attach the Tape (0716) as shown
in the illustration.

Tape (0716)

Control switch block
(PS-CX5500)

2-21

DCR-DVD100/DVD100E

2-25.FP-609 FLEXIBLE BOARD

2

Screw (M1.7 × 4),

lock ace, p2 (silver)

3

PWB retainer sheet meta

l

When pusing the portion A in the direction of the arrow,
push the open switch in the direction of the arrow and open
the disc cover.

5

Tapping screw

(M1.7

×

3.5)

7

FP-609 flexible board

Plunger

Plunger

Disc cover

Open switch

Open switch

A

1

4

Tapping screw

(M1.7

×

3.5)

6

Solenoid cover

2-22

DCR-DVD100/DVD100E

2-26.CIRCUITE BOARDS LOCATION

CD-428
CK-127

FB-220
LB-084
MA-420

MD-097

PD-188
SS-174T

VC-307

NAME FUNCTION

LB-084

FB-220

CK-127

CD-428

MD-097

MA-420

VC-307

PD-188

SS-174T

CCD IMAGER
CONNECTOR, FUNCTION SWITCH
FUNCTION SWITCH
EVF CONNECTOR, EVF BACK LIGHT
PITCH/YAW SENSOR, REMOTE SENSOR, MIC

RF, SKEW SENSOR, DVD DSP, MECHA DRIVE, UCON, FLASH, LATCH, USB I/F,
CONNECTOR, DC/DC CONVERTER

LCD DRIVE, BACK LIGHT DRIVE
TSB SHOCK SENSOR

DC/DC CONVERTER, A/D CONVERTER, TIMING GENERATOR, EVR, CAMERA PROCESS,
LENS DRIVE, DVD SYSTEM CONTROL, 128M SDRAM, 16M FCRAM, DVD CODEC,
64M SDRAM, VIDEO IN/OUT, VIDEO A/D CONVERTER, EVF DRIVE, CAMERA CONTROL,
HI CONTROL, HI/DIGITAL STILL CONTROL, 32M FLASH MEMORY, AUDIO I/O, MIC AMP,
PITCH/YAW SENSOR AMP, CONNECTOR, DD CONNECTOR

2-23E

DCR-DVD100/DVD100E

CONTROL SWITCH BLOCK
(KP-CX5500)

CONTROL SWITCH BLOC

K

(PS-CX5500)

FP-605

FP-607

FP-604

FP-602

FP-612

FP-611

FP-610

FP-606

FP-603

FP-228

FP-629

FP-608

FP-609

2-27.FLEXIBLE BOARDS LOCATION

Disassembling procedure of MD-097
block assembly are not shown. Pages
from 2-24 to 2-26 are not shown.