Sony CMA-87 Users guide

Progressive Scan B/W CCD Camera Module

XC-7500

XC-8500CE

Component /OEM

XC-7500

1/2" IT CCD
659(H) X 494(V),EIA

CMA-87

XC-8500CE

1/2" IT CCD

782(H) X 582(V), CCIR

CMA-87

OUTLINE

The XC-7500/XC-8500CE is a frame shutter camera that mounts a newly developed CCD. Square
grid cells most suitable for a machine vision are used for this CCD that enables all pixels to be read.
The resolution is equal in the vertical and horizontal directions. Therefore, it is not required to correct
the dimension on the image processing side. The XC-7500 conforms to an EIA system of 659(H) x
494(V), and the XC-8500CE conforms to a higher-resolution CCIR system of 782(H) x 582(V).
The XC-7500 and XC-8500CE enable a trigger frame shutter (E-DONPISHA) control function,
signal format conversion function, and high-rate scanning function when they are connected
with an optional memory adaptor (CMA-87). Moreover, the still pictures of various high-speed
movable objects can be read at a high resolution (in the horizontal and vertical directions).

FEATURES

XC-7500/XC-8500CE

1/2"Hyper HAD IT CCD

•

Square Pixels 9.9 x 9.9µm(XC-7500), 8.3 x 8.3µm(XC-8500CE)

•

Frame Shutter

•

Normal : 1/60~1/10,000sec, 1/50~1/10,000sec, Flickerless
E-DONPISHA :

Low-Speed : oo~approx.1/60sec, oo~approx.1/50sec
Normal-Speed : 1/1,000~1/11,000sec, 1/1,000~1/10,000sec
High-Speed : 1/10,000~1/100,000sec
External Control : oo~1/60~1/10,000sec, oo~1/50~1/10,000sec

Three Mode Outputs

•

Interlace(1/60sec, 1/50sec)-2I mode
Non interlace(1/60sec, 1/50sec)-2Nmode
Non interlace(1/30sec, 1/25sec)-1N mode

Restart Reset Function (Trigger Input)

•

CMA-87

E-DONPISHA(Frame Shutter)Control

•

Signal format conversion EIA/CCIR, VGA/SVGA

•

High-Rate scan-Up to 4

•

DIMENSIONS

XC-7500/8500CE

CMA-87

CCD OUTPUT WAVE TIMING CHART

•

XC-7500

•

•Optical size:1/2-inch format

•Total number of pixels:692(H)x504(V)

•Efective picture elements:659(H)x494(V)

•Number of video output pixels:648(H)x485(V)

•Unit cell size:9.9µm(H)x9.9µm(V)

MTF,SPECTRAL RESPONSE

MTF

Spectral Response

•

XC-8500CE

•

•Optical size:1/2-inch format

•Total number of pixels:823(Hx592(V)

•Efective picture elements:782(H)x582(V)

•Number of video output pixels:767(H)x575(V)

•Unit cell size:8.3µm(H)x8.3µm(V)

INTERNAL SWITCH FUNCTIONS

Location

•

Location No. Function Factory Setting

MB-612 0:1/60 1:1/125 2:1/250

SG-235 S2 INT H/V OUT / EXT H/V IN EXT H/V IN

PR-214 S2 Gain tracking MAN/AUTO MAN

S1 High-Rate ON/OFF OFF
S2 Normal Shutter

3:1/500 4:1/1000 5:1/2000 0
6:1/4000 7:1/10000 8:FL
9:FL

S1 VD 75 termination ON/OFF ON

S3 HD 75 termination ON/OFF ON
S4 R.Rmode VDpulse 1~4 1:OFF 2:OFF
S5 Trigger polarity +/- +
S6 E-DONPISHA
S7 E-DONPISHA®WE(0V/-1V) 1:OFF(-1v)

S1 VIDEO 1 r ON/OFF OFF

S3 VIDEO 2 r ON/OFF OFF

®

Shutter Speed

VIDEO(3V/1V) 2:OFF(1v)
RESET/NON RST 3:OFF(NON)
WE +/- 4:OFF(–)
HIGH SPEED 5:OFF
LOW SPEED 6:OFF

approx 1/1000sec

E-DONPISHA

Set the E-DONPISHA switch on SG-235 board

•

®

XC-7500

Shutter
speed
(sec)

1/1000
1/2000
1/3000
1/4000
1/6000
1/8000
1/10000
1/11000

SW6

2 3 4 5 6 7 8 9 0

1

ON
ON

ON
ON

ON
ON
ON
ON
ON
ON

ON

ONONON

ON

ON

ON

ON

ON

ON
ON

ON

ON

ON
ON

ON

XC-8500CE

Shutter
speed
(sec)

1/1000
1/2000
1/3000
1/4000
1/6000
1/8000
1/10000

SW6

1

2 3 4 5 6 7 8 9 0

ON

ON

ON ON

ON

ON

ON

ON

ON

ON

ON
ON

ON

ON

ON

ON

ON
ON
ON

ON

ON

ON

ON
ON

ON

E-DONPISHA

This function accumulates electric
charges with the external input trigger
pulse as reference, places them on a
continuous sync signal, and outputs a
video signal. The objects that move
at high speed are recognized using a
sensor, and the image can be precisely
shot in the fixed place. Normal speed
(shown in the figure on the left), low
speed, high speed, and external
control speed are available as the
shutter speed. The shutter operates
in the range of oo to 1/100,000 sec.

®

VARIOUS SHUTTER FUNCTIONS

NORMAL SHUTTER(N.s.)

Rotary Switch

MB-612 board

E-DONPISHA

SG-235 board

S6 : Setting Shutter Speed
S7 : Setting E-DONPISHA

®

®

oo

This shutter speed is used when a continuous
picture without blurring is required.

Position

0
1
2
3
4

Shutter

Speed(sec)

OFF
1/125
1/250
1/500

1/1000

Position

5
6
7
8
9

Shutter

Speed(sec)
1/2000
1/4000
1/10000
FL

(Flickerless)

FL

(Flickerless)

2TRG input

This shutter speed is used to obtain one frame
of still picture by inputting any trigger pulse.

Low-Speed(E-Ls)

•

(for long exposure)

Normal-Speed(E-Ns)

•

Extenal Control(E-Tg)

•

(wide range speed by trigger width control)

High-Speed(E-Hs)

•

(for capturing high speed object)

In case of XC-7500, the connection with CMA-87 and E-Tg mode are available after #500001.

*

1/50 or 1/60. 1/1,000 1/10,000 1/100,000

N.s.

E-Ls

E-Ns.

E-Hs

*

E-Tg

*

with CMA-87(Internal SW)

*

with CMA-87(TRG through)

Sec.

(Factory setting)

CMA-87

One-Shot Memory of E-DONPISHA

This function controls the E-DONPISHA frame shutter by inputting a
trigger pulse and memorizes the simultaneous timing signal output
from the VIDEO OUT 1 and 2 terminals of the camera.

Sports Mode

In the sports mode, a continuous picture at two times the normal speed
(1/100 sec.) can be read as a 50-field (CCIR/PAL) output by
combination with the XC-8500CE. Since 1/100 sec. are precisely
required in the sports world, this mode can be used for video recording.

®

High-Rate Scanning

The image in a CCD can be read
partially (in the vertical center
portion)at high speed.This function
is useful in the field where a shorter
trigger cycle than one field is required.
(1.5, 2, 3, and 4 times the normal
speed)

Example)

XC-8500CE: 220/64 lines at 2/4 times the normal speed
XC-7500: 180/48 lines at 2/4 times the normal speed

Signal Format Conversion

CMA-87 VIDEO OUT

Output

SVGA

VGA

EIA

CCIR

*7500

OK

OK

*OK

8500CE

*In case of XC-7500,the above function is available after #500001

OK
OK
OK

Scan Convert Out
646x485 / 60 Frame
767x575 / 50 Frame
646x485 / 30 Frame
767x575 / 25 Frame

CONDITIONS & TIMING FOR SHUTTER FUNCTION

Normal Mode

The connection for normal operation and
normal shutter.

Extarnal Trigger Shutter

Non Reset Mode(one shot image/standard sync) (S7:Factory setting)

•

The E-DONPISHA mode can capture one
shot image by external trigger.

Output Image

XC-7500/XC-8500CE

Output

Sync

Output mode
VIDEO OUT 1
VIDEO OUT 2

The sync signal at the VIDEO OUT 2 terminal is the same as that at the VIDEO
OUT 1 terminal.
In the 2I mode, O1, O2/E1,E2 signals can be continuously output by inputting
a non-interlaced external sync signal.

Shutter Range

Continuance image
Internal/External Internal
2I 1N

O1,E2
E1,O2

Output Image

XC-7500/XC-8500CE

Output

Sync

Output mode
VIDEO OUT 1
VIDEO OUT 2

In the 2N mode, the VIDEO OUT 1 and 2 terminals do not operate.
The sync signal at the VIDEO OUT 2 terminal is the same as that at the VIDEO
OUT 1 terminal.

One shot image
Internal/External

2I 1N
O(E)
E(O)

O = ODD field image
E = EVEN field image

O1+E1

/

Low-Speed

•

Normal-Speed

•

High-Speed

•

External Control

•

( ):XC-8500CE

O+E

/

2N

E1,E2

O1,O2

2N

/
/

Reset Mode(one shot image/non standard sync)

•

Write Enable Pulse (WEN)

In a camera, the write enable pulse is output 1V before a video output signal is
produced or it is output simultaneously with a video output signal. This pulse is
used for combination with peripheral equipment.

Low-Speed

•

Normal-Speed

Shutter Range

Output Image

Output

Sync

Output mode
VIDEO OUT 1
VIDEO OUT 2

In the 1N and 2N modes, the VIDEO OUT 1 and 2 terminals do not operate.
The sync signal at the VIDEO OUT 2 terminal is the same as that at the VIDEO
OUT 1 terminal.

2I 1N
O(E)
E(O)

•

High-Speed

•

External Control

•

( ):XC-8500CE

XC-7500/XC-8500CE

One shot image

Internal

/
/

2N

/
/

CONNECTIONS

C-mount lens

VCL-08YM

F1.4 8mm

VCL-12YM

*IR cut filter can be

screwed out.

Dummy glass for
adjusing FB(as an
option)

Camera Cable

CCXC-12P02S

12p- 12p(SHIELD)

Camera
Adaptor
DC-777

05S
10S
25S

Junction Box
JB-77

DC12V
VIDEO 1
VIDEO 2
H/V,VS

AC100V
VIDEO 1
H/V,VS

F1.8 12mm

VCL-16Y-M

30ø 0.5, 1.5, 10, 22mm

Extension Ring Kit

F1.4 16mm

VCL-25Y-M

F1.6 25mm

VCL-50Y-M

F2.8 50mm

REAR SWITCHES&CONNECTORS

Pin No.

EXTERNAL SYNC MODE INTERNAL

HD/VD VS

1
2
3
4
5
6

GND
+12V

VIDEO(G)

VIDEO OUT1

HD(G)
HD IN

VIDEO OUT MODE
2N 1/60S NON INTER
2I 1/60S INTERLACE
IN 1/30S NON INTER

SHUTTER MODE
ED E-DONPISHA
N NORMAL
R.R RESTART RESET

LO-77ERK

VCT-37 VCT-75I

Tripod Attachment

MACRO LENS

45mm MACRO LENS 50mm MACRO LENS
2/3" 1"

F3.2 45mm
XC-7500 use 60mm fairiy

SYNC MODE

GND
+12V

VIDEO(G)

VIDEO1

VIDEO(G)

VIDEO OUT1

HD OUT

12P MULTI

GND

+12V

HD(G)

F2.8 50mm

Pin No.

EXTERNAL SYNC MODE INTERNAL

HD/VD VS

7
8

9
10
11
12

VD IN

VIDEO(G)

VIDEO OUT2

GND
+12V

VD(G)

100m fairiy

Isolate

6p-6p

Trigger Cable
CCXC-6P05

VS IN

VIDEO(G)

VIDEO2

GND

+12V

VS(G)

SYNC MODE

VD OUT

VIDEO(G)

VIDEO OUT2

GND
+12V

CD(G)

DC-77RR

CMA-87

*VIDEO 2 is not available

AC100V
VIDEO 1
H/V,VS

*VIDEO 2 is not available

DC12V

VIDEO

(VIDEO 1+VIDEO 2)

H/V,VS

*Can be slotted in DC-77RR.
The XC-7500 can be used in serial numbers 500001 and
later. When the XC-7500 of serial numbers 100001 to
101100 is used, consult the sales person in charge.

12Pin Connector

Pin No.

6P MULTI

1
2
3
4
5
6

SIGNAL

CTL IN /FLD OUT

TRIGGER IN

GND

WE OUT

AI VIDEO OUT

+12V OUT

6Pin Connector

*

GAIN MODE
A AUTO GAIN
F FIX GAIN
M MANUAL GAIN

MANUAL GAIN
CONTROL VOLUME

CTL IN/FLD OUT

*CTL IN is very useful for monitoring the normal image during E­DONPISHA.Serial numbers 100201 and later are set to CTL IN
at the factory.Therefore, a video signal is usually output
when pin 1is connected to ground(GND) during E-DONPISHA
setting. In the XC-7500, serial numbers 100001 to 100200
are set to FLD OUT at the factory.To set serial numbers
100201 and later to FLD OUT, the XC-7500 must be changed
internally.

COMPARISON WITH SONY XC-711

XC-003/P
Pick up device
Sensing system

Lens mount
Horizontal
resolution
Vertical resolution
RGB sync system
Extrenal sync system
External trigger shutter

Shutter speed

Dimensions

* : 1. In some lenses, the color shading peculiar to a prism block may occur. Therefore, use an XC-003 lens (VCL-08WM/16WM/25WM)

or a lens with a exit pupil distance of more than 100 mm.

2. VBS and Y/C signals are used as a monochromatic video output signal during external synchronization.

3. VBS and Y/C signals are used as a monochromatic video output signal during external synchronization, but they can be color­monitored by changing the internal setting of the camera.

4. The internal sync restart reset mode and E-DONPISHA
signal or VS signal.

NTSC/PAL
RGB

1/3"Hyper HAD IT CCD
3CCD prism block(*:1)
C mount
570TV lines/570TV lines
756 pixels/739 pixels each
485 lines/575 lines
2Vp-p, 75
HD/VD, VS(*:2)
E-DONPISHA (*:4)
Internal sync Restart Reset(*:4)
Normal:1/100~1/10000sec.
E-DONPISHA

50(H) x 56(W) x 128(D)mm

®

:1/1000~1/12000sec.

PAL~1/10000sec.

®

reset mode cannot be externally synchronized using an HD/VD

XC-711/P
2/3"HAD IT CCD
1CCD RGB vertical
C mount
330TV lines/330TV lines
252 pixels/246 pixels each
485 lines/575 lines

0.3Vp-p/2Vp-p, 75
HD/VD, VS(*:3)

External sync Restart Reset
Normal:1/125~1/10000sec.

PAL:1/60~

50(H) x 56(W) x 149(D)mm

Long-Time Exposure

The long-time exposure up to 128 frames
can be carried out at low-speed shutter
mode at on-screen menu. The XC­003/003P automatically calculates
the integration time corresponding to
the frame numbers on the menu,and
outputs continued frame images.
The long-time exposure also can be
available with Restart Reset function.
For this function,2 trigger pulses are
required;one for starting the integration,
the other for ending it. Field or frame
output is available by Restart Reset
mode setting.

SPECIFICATIONS

Signal system
Pick up device
Picture elements
Video output elemens
Cell size
Lens mount
Flange back
Video out

Horizontal resolution
S/N ratio
Sensitivity
Min.sensitivity
Gain
Sync system
External sync
Shutter speed

External trigger input

WEN output
Power requirements
Dimensions
Weight
Regulations
Operating temperature
Storage temperature
Shock resistance

Vibration resistance
MTBF

XC-003
NTSC
1/3" Hyper HAD Interline Trasfer CCD(x3)
768(H) x 494(V)
756(H) x 485(V)

6.35(H) x 7.4(V)µm
C mount

17.526mm in air
RGB,Y/C(9pin D-Sub), VBS(12pin/BNC),
Sync(RGB):2Vp-p, 75
570TV lines,RGB:756pixels each
59dB
2000Lux(F5.6)
31Lux(F2.2, Gain+18dB, video out 100%level)
0~18dB(1dB STEP)
Internal/External(auto)
HD/VD,VS(Frequency deviation:±1%)
Normal shutter:1/100~1/10000sec.(8 steps)
Low speed shutter:2~129 frame(1 frame each)
E-DONPISHA:
1/1000~1/12000sec.(8 steps)
Restart Reset:1/100~1/10000
H:4~5Vp-p, L:0~0.7Vp-p, positive polarity, High reseption
pulse width:2µ~10msec.
5Vp-p, negative polarity(+/- changeable),High impedance termination
DC12V(11.0~16.0V)/5.6W
56(W) x 50(H) x 128(D)mm
440g
FCC, UL, CSA, CE

-5~+45°C

-20~+60°C
490m/sec.(50G), 6 directions

29.4m/sec.(3G), 11~200Hz,
19200Hrs(based on MIL-HDBK-217F)

XC-003P
PAL

752(H) x 582(V)
739(H) x 575(V)

6.5(H) x 6.25(V)µm

570TV lines,RGB:739pixels each
58dB

E-DONPISHA:
1/1000~1/10000sec.(7 steps)

sec.(8 steps)

DIMENSIONS

Sony Electronics Inc. (USA) HQ 1 Sony Drive Park Ridge, NJ 07656 (TEL:[phone]) (FAX:[phone])

•

Sony of Canada Ltd.(CANADA) 411 Gordon Baker Road, Willowdale, Ontario M2H 2S6 (TEL:[phone]) (FAX:[phone])

•

Sony Broadcast & Professional Europe HQ 15, rue Floreal 75831 Paris Cedex 17, France (TEL:[phone]) (FAX:[phone])

•

Germany Hugo-Eckener-Str. 20, 50829 Koln (TEL:[phone]) (FAX:[phone])
France 15, rue Floreal 75831 Paris Cedex 17 (TEL:[phone]) (FAX:[phone])
UK The Heights, Brooklands, Weybridge, Surrey KT13 0XW (TEL:[phone]) (FAX:[phone])
Nordic Per Albin Hanssons vag 20 S-214 32 Malmo Sweden (TEL:[phone]) (FAX:[phone])

Sony Corp. B&P Systems Co. ISP Dpt.(JAPAN) 4-16-1 Okata, Atsugi-shi, Kanagawa-ken, 243-0021 (TEL:[phone]) (FAX:[phone])

•

Italy Via Galileo Galilei 40 I-20092 Cinisello Balsamo, Milano (TEL:[phone]) (FAX:[phone])

http://www.sony.co.jp/ISP/

Design and specifications are subject to change without notice.

http://www.sony.com/professional

http://www.bpe.sony-europe.com

97A