Sony CDP-CE105 Owner’s Manual

Compact Disc

Player

Operating Instructions

I)IOITAJ. AUDIO

CDP-CE105

- Reorient or relocate the receiving

antenna.

- Increase the separation between the

To prevent fire or shock

hazard, do not expose the unit to rain or

moisture.

equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

To avoid electrical shock, do not open the cabinet.

Referservicing to

qualified personnel only.

_ _ _oou4u_EomwacE F_o_l_

//_ This symbol is intended to alert

the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

//_ This symbol is intended to alert

the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

INFORMATION

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

CAUTION

You are cautioned that any changes or modification not expressly approved in

this manual could void your authority to operate this equipment.

Owner's Record

The model and serial numbers are located on the rear of the unit.

Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. CDP-CE105 Serial No.

For the customers in Australia

The following caution label is located inside the unit.

Aw_ M _o u

ADVARSEL

VARO_. VARNING

ADVARSEL

This appliance is classified as a CLASS 1 LASER produe_

The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. _ '

_WJL'aa _ _ W

Precautions

On safety

• Caution -- The use of optical

instruments with this product will increase eye hazard.

• Should any solid object or liquid fall into the cabinet, unplug the player and

have it checked by qualified personnel before operating it any further.

Onpowersouces

• Before operating the player, check that the operating voltage of the player is

identical with your local power supply. The operating voltage is indicated on the nameplate at the rear

of the player.

• The player is not disconnected from the AC power source as long as it is

connected to the wall outlet, even if the player itself has been turned off.

• If you are not going to use the player for a long time, be sure to disconnect

the player from wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.

• AC power cord must be changed only

at the qualified service shop.

On placement

• Place the player in a location with

adequate ventilation to prevent heat

build-up in the player.

• Do not place the player on a soft

surface such as a rug that might block

the ventilation holes on the bottom.

• Do not place the player in a location

near heat sources, or in a place subject to direct sunlight, excessive dust or

mechanical shock.

On operation

• If the player is brought directly from a

cold to a warm location, or is placed in a very damp room, moisture may

condense on the lenses inside the player. Should this occur, the player

may not operate properly. In this case, remove the disc and leave the player

turned on for about an hour until the

•__moisture :evaporates.

I_f.leaning _

_t,I _ iG_an the cabinet, panel and controls

k|i oI ..........

- "wiLff a so_ €loth slightly moistened

L, -

a[_tld _t6tetgent solution. Do not

: of abrasive pad, scouring

as alcohol or

b ine d:ii.

If you have any questions or

problems concerning your player, please consult your nearest Sony

dealer.

Welcome! •

Thank you for purchasing the Sony Compact Disc Player. Beforeoperating" the unit, please read this manual thoroughly and retain itfor future

reference.

TABLE OF CONTENTS

Getting Started

Unpacking ........................................................................................................ 4

Hooking Up the System ................................................................................. 4

About This Manual

The instructions in this manual are for model CDP-CE105.

Convention

. • The following icon is used in this

manual:

"_';° Indicates hints and tips for

making the task easier•

Playing a CD ........................................................................................................6

Playing CDs

Using the Display ...........................................................................................8

Exchanging a Disc While Playing a Disc ..................................................... 8

Locating a Specific Disc ................................................................................. 8

Locating a Specific Track or a Point in a Track .......................................... 9

Playing Tracks Repeatedly (Repeat play) " 9

Playing in Random Order (Shuffle Play) .................................................... 9

Creating Your Own Program (Program Play) .......................................... 10

Additional Information

Notes on CDs ................................................................................................. 11

Troubleshooting ............................................................................................ 12

Specifications .............................................. _.................................................. 12

Index

Index ............................................................................................................... 13

Unpacking

Check that you received the following item:

• Audio cord (1)

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each component before making the connections.

CDplayer

• To Lineoutput an AC outlet (R)

Audio input Audio input

(L) (R) Amplifier

:Signal flow

What cordswill I need7 Audio cord(supplied)(1)

WhiteRed(L)_

(R)

I _ Lineoutput

(L)

_ White

To an ACoutlet

(L)

Red

(R)

Hookups

Wh(m connecting the audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid

hum and noise.

CDplayer Amplifier

Connecting theAC power cord

Connect the AC power cord to a wall outlet.

Transporting the player

Before transporting the player, follow the procedure

below to return the internal mechanisms back to their original position.

1 Remove all the discs from the disc tray. 2 Close the front cover and wait until "no dISC"

appears in the display.

3 Press POWER to turn off the player.

+ 11 hidden pages