Sony BVM-1310, BVM-1410P, BVM-1410PM Service Manual

In recognizing a wide diversity of viewing requirements within today's Broadcast and production
environments, Sony has systematically developed a broad and flexible range of color monitors.
Each are tailored with specific performance capabilities and have features to address optimally
specific applications. The BVM-131011410P/1410PM High Performance Color Monitor is designed to

make precise evaluations of video signals. With the adoption of the Super Fine Pitch, One-gun
3-beam Aperture Grille CAT and advanced circuit technolog~ the BVM-131011410P11410PM realizes

700 TV lines of center resolution and the stabilization of color temperature. By using optional plug-in
type decoder boards, a maximum of 3 out of the 4 TV standard systems (NTSC, PAL, SECAM, PAL -M)
can be used in any required combination. And no~ with the optional computerized Auto Setup Kit,
monitor setup, which requires so much time and skill to accomplish, can be performed easily and
accurately within a mere 40 seconds. The BVM-Series monitors are the top of broadcast quality
monitors for critical video evaluation.

Features

.Auto Setup capability (optional BKM-1450, for NTSC,

PAL, SECAM, RGB, Component)

.By using optional decoder boards (plug-in type), a

maximum of 3 TV standard systems can be selected in

the drawer.

.Stabilized color temperature is obtained by employing

a newly developed beam control circuit.

.A unique picture setup switch facilities as an

adjustment for accurate incoming video level
alignment.

.Up to 6dB of aperture correction at 4.5MHz and

6.5MHz selectable.

.Pulse Cross function is provided to check the

horizontal and vertical syncs simultaneously.

.Built-in cross hatch and white signal generator (100

IRE) for easy monitor alignment.

.Component (Y, R.Y; B-Y) and RGB input facilities are

available.

.Optional component (Y, R-Y, B-Y) and RGB output

facilities are available with the BKM-1440.

.Split screen (vertical only) for precise picture

confirmation.
.VITC display facility (optional BKM-1460)
.Safe area display facility (with the optional BKM-1470)
.With the optional BKM-1480, black level signal

generator is available for easy and precise adjustment
of black level setting of monitor.

.Blue only mode with B/W display to evaluate noise

component precisely.

.Two lockable pull-out drawers give access to

convergence, color balance, level adjustment and
other controls.

.Optional Comb Filter for NTSC (BKM-1411 or BKM-1412,

BKM-1412 is supplied with the BVM-1310)
.Optional Comb Filter for PAL (with BKM-1422)
.Optional Digital 4:2:2 Input Adaptor Kit BKM-2085 and

D-2 Serial Input Adaptor Kit BKM-2090 available.
.Auto/Manual Degaussing.
.Provides US and EBU standard phosphors to meet

customer requiremef\ts.

.The AFC switch provides 3 modes

(FAST /NORMAL/SLOW).

.Over Drive Protection circuit protects against picture

tube damage.

.Super Fine Pitch CRT assures a center resolution of

700 TV lines at 40 fL.
.19-inch rack mountable with the optional BKM-1400
.Raster size stability within 1% from 0 to 40 fL.
.Precise convergence; convergence errors are less

than 0.3mm at center and 0.6mm at edge of area.

Front Panel