
ACCESSORIES
BI-DIRECTIONAL RADIO SYSTEM SOMloq2
Track extension set
Length 1096 mm, incl. ceiling bracket,
long isolator chain (including magnet)
#10460V000
Track extensionsDoor bracketsBrackets
Door bracket set
incl. screws and bolts one piece bracket
#1650V000
2x 2x
Low headroom fitting
Ceiling mounting unit set
for track MS 1,25 mm;
incl. fixing material
#1646V000
Door bracket set
incl. screws and bolts complete bracket
#S10201-00001
Door bracket
Ceiling suspension insert
for angle profile use (width 18 mm)
for fastening on the ceiling
#S10178-00001
Door bracket set
incl. screws and bolts
type H
#S10228-00001
Guarantees reliable remote control
with good range and direct feedback
for increased safety and convenience.
Our new products, equipped with the
bi-directional SOMloq2 radio system,
transmits radio signals in both directions
when the corresponding transmitter
is used, e.g. Pearl Vibe feedback
vibration.
The system also offers:
• Feedback of whether the sent
command is being processed
by the receiver
• The option of querying door
positions/reception status
• Improved range and higher
reliability due to the hop function,
since the signal is actively
forwarded by SOMloq2 receivers
• Maximum protection from hackers
with 128 bit AES encryption with
Rollingcode
• Auto-repeat function for comfortable
opening while approaching the
object
• Downward compatible with the
Somloq Rollingcode radio system,
making it possible to control existing
operators and radio receivers
TECHNICAL DATA
Operator S 9060 pro
Max. travel path 7,500 mm 7,500 mm 7,500 mm
Max. door width/door height
Sectional, swing, canopy doors
Side-opening sectional, side-opening,
side-hinged doors
4,500 mm/2,500 mm
2,500 mm/2,500 mm
+
S 9080 pro
6,000 mm/2,500 mm
2,500 mm/3,000 mm
+
S 9110 pro
8,000 mm/2,500 mm
2,500 mm/3,500 mm
+
pro
+
incl. pluggable adapter “back”
#7044V000
direct mounting track to ceiling
incl. screws and bolts complete bracket
#7045V000
SERVICE-MODULE TRANSMITTER
SOMlink #7040V000
With intelligent control technology SOMlink
(for dealers), there are additional options for easily
adjusting features and parameters with a web app
using your smartphone or tablet.
Pearl Vibe # 4019V000
• 4-command transmitter
• Bi-directional radio system, frequency: 868.95 MHz
• Efficient vibration motor for long battery life
• Reliable radio control system with good range
(
approx. 60 – 150 m)*
• Sensible vibrating feedback
• 128 bit AES rolling code encryption
• Collision-resistant
Matching accessories:
Holder for installing the hand-held transmitter in a car or on the wall
can be delivered – just stick it on and screw it in.
#4643V000
Holding clip for installing the hand-held transmitter on the
sun visor in a vehicle.
#S10092-00001
* environment-dependent
Travel length 2,750 mm 2,750 mm 2,750 mm
Max. door weight 120 kg 160 kg 200 kg
Max. traction and pressure force 600 N 800 N 1,100 N
Max. running speed 240 mm/s 210 mm/s 180 mm/s
Power consumption (standby) < 1 W < 1 W < 1 W
Switch-on duration after S3 in % 40% 40% 40%
Connection for warning light Yes (DC 24 V/25 W) Yes (DC 24 V/25 W) Yes (DC 24 V/25 W)
Number of radio memory positions 40 40 40
Set S 9060 pro+ # S10154-00001
Set S 9080 pro+ # S10155-00001
Set S 9110 pro
3-piece track including carriage,
control unit housing, fixing material
+
# S10156-00001
SOMMER ANTRIEBS- UND FUNKTECHNIK GMBH
HANS-BÖCKLER-STR. 21–27 | D-73230 KIRCHHEIM/TECK
PHONE +49 70 21 80 01-0 | FAX +49 70 21 80 01-100
INFO@SOMMER.EU | WWW.SOMMER.EU
(bracket, attachment to header and
ceiling mounting unit),
push arm and door bracket,
pre-programmed Pearl Vibe
4-command transmitter
SOMMERGMBH SOMMER_GMBH
(# 4019V000)
DE-EN #S10298-00002–08/16 Literal errors, errors and technical changes excepted.
Intelligent
operator with
separate
control unit
housing
The innovation for garage doors
Installing control unit housing flexibly on the ceiling or wall

THE NEXT GENERATION OF OUR
GARAGE DOOR OPERATORS
QUALITY
• p r o+ is the innovative successor of the successful
base+ garage door operator from SOMMER:
Now even more flexible and convenient due to
the separate control unit housing
• Universal operator for sectional doors, overhead
doors, swing doors, canopy doors*, side-hinged
doors*, side-opening sectional doors and sliding
doors
• Integrated LED technology: durable, energy-saving
and efficient lighting
• Saves power: <1 watt standby
• Made in Germany
SAFETY
• Motor with high automatic locking and active
counter-pressure at all points in the event of an
attempted break-in
• Connection option for battery pack for emergency
operation in the event of a power failure
• Locking magnet for motor (break-in protection),
locks in any position, even during ventilation/
partial opening function (available as an option)
Lock # 1651V000
• Thanks to the integrated emergency release,
the carriage can be engaged and disengaged
in any position
• Bi-directional, secure SOMloq2 radio system
VERSATILITY
• Countless accessories for extension,
e.g. Memo hand-held transmitter memory,
Senso humidity sensor, Lock locking magnet
Lumi pro+ additional LED lighting, and much
more...
• 2 integrated control buttons in the control unit
housing for activating the door and the lighting
or partial opening function
• Additional connection options without spiral
cable directly on carriage (safety contact for the
slip door or safety edge OSE or 8k2)
• Universal power supply to the track (can either
be from the front or the rear)
• Removable carriage without track disassembly
• Short cable runs with wall mounting for external
accessories (photo eye/warning light/
external buttons...)
ADDITIONAL EQUIPMENT
All accessories are easy to install via Plug and Play.
Sockets are colour-coded and labelled.
INTELLIGENCE
• Automatic learning process: self-learning
force curve with continual adjustment,
e.g. summer/winter mode
• Optimal speed profiles for quick opening and
secure closing
• Operation compliant with standards
• Automatic calibration of door operation through
direct entry of measured operating forces
• Pre-selectable door types via DIP switch
• Active braking for moving doors
• Countless setting and querying options via
SOMlink service module
• Gear-saving soft start/stop
• Automatic end position detection in Door CLOSE
when programming, the closing pressure can also
be individually adapted to the structural conditions
EXTRA FLEXIBLE THANKS TO SEPARATE
CONTROL UNIT HOUSING
FLEXIBILITY
• Separate control unit housing for installing on the
wall or ceiling, depending on your requirements.
The existing power socket in the garage is optimally
suited for the power supply
• When installing the separate control unit housing
on the wall, the interior push-button is a convenient
distance from the exit door
• The control unit housing, which can be installed
separately, makes an additional power socket and
elaborate electric work unnecessary
1
* Special fitting required
Track
• The track unit (standard equipment)
opens sectional doors up to a height
of 2,500 mm, swing doors up to a
height of 2,750 mm
• By extending the track, even taller
doors can be opened
(extension set # 10460V000)
Carriage
• Certified restriction of closing forces acc.
to EN 12445 by electronic
motor monitoring (Ift Rosenheim-certified)
Ceiling suspension unit
• Flexible and versatile
Chain
• High-quality fixed chain
(galvanic nickel-plated)
• Wear- and maintenance-free, pre-tensioned
via springs with high tensile strength
A
C
B
A
Lock # 1651V000
Locking magnet which mechanically
blocks the motor in any position up to
an attack force of 300 kg (certified),
thereby improving the existing breakin protection. (mechanical locking
mechanism of the operator)
B
Senso #10371
For recording air humidity and
temperature in the garage.
The carriage automatically opens
and closes the door a bit if necessary,
ensuring perfect air circulation. This
reduces the risk of mould formation.
C
Memo # 10373
Used to expand the memory to
450 transmitter commands.
If service is required, the saved
transmitters can be easily moved
to a new carriage.
Relay # 7042V000
Additional relay for additional
switching of a garage or courtyard light.
Lumi pro
Additional LED lighting for the wall
control. It is switched in parallel with
the lighting in the carriages and can
be easily switched on and off using
the light function by means of a handheld sensor.
+
# S10205-00001
Buzzer # 7043V000
Two functions in one product:
The alarm buzzer recognises a break-in
attempt and outputs a loud signal tone.
The warning buzzer, on the other hand,
outputs an acoustic signal during the
closing process.
Motion # S10343-00001
Uses a passive infrared sensor to detect
the invisible thermal radiation of moving
bodies (humans/animals, etc.) and
reacts to them. The operator lighting
(additional lighting/relay) switches on
automatically for safe movement when
the garage is entered.
Accu # S10523-00001
Assumes the power supply of the
operator for > 5 door cycles in the
event of a power failure.
Parking position laser # 10378
Gives optical assistance for perfectly
positioning a vehicle in the garage.
The laser is active during the opening
process and the set light burning time.
2
+
control –
pro
flexible installation
in 3 versions:
at the rear (1),
3
on the ceiling (2),
at the front (3).