SOMFY Elite Smart Shades Sonesse 30 RTS, Elite Smart Shades R28 WireFree RTS, Elite Smart Shades Sonesse 40 RTS, Elite Smart Shades Sonesse 50 RTS Quick Programming Manual

QUICK PROGRAMMING GUIDE FOR SOMFY® RTS MOTORS

(R28 WireFree & all Sonesse® 30 / 40 / 50 RTS Models)

Programming Mode

Before You Begin: Steps 1 to 7 must be completed to ensure proper shade programming & functionality. It is recommended to power only the

motor being programmed (disconnect power to all other motors). Motor will exit programming mode after 2 minutes of inactivity.

STEP 1: Connect Power: With the motor installed in the shade, connect power to the motor (120V, 12V or 24V Tranformer or battery wand).

Page 1©2018 Elite Window Fashions™

2018 v.1

Adding or Deleting a Remote or a Channel

Resetting R28 WireFree RTS 12V DC Battery Motors

To delete all previous settings and reset the motor to factory mode, use a paperclip to press and hold the
PROGRAM BUTTON located at the side of the motor. Hold for approximately 12 seconds, during which the
motor will jog 3 separate times. All remotes and limits will be erased (motor is now reset to factory mode).

Resetting Sonesse® 30 RTS Motors (24V DC & WireFree models)

To delete all previous settings and reset the motor to factory mode, use a paperclip to press and hold the
PROGRAM BUTTON located at the side of the motor. Hold for approximately 12 seconds, during which the
motor will jog 3 separate times. All remotes and limits will be erased (motor is now reset to factory mode).

Resetting Sonesse® 40 / 50 RTS 120V AC Motors

Perform a dual power cut to delete all previous settings.

Step 1 Step 2 Step 3 Step 4

2 Seconds 2 Seconds

10 Seconds

Motor jogs 1x

Step 5:

Press and hold the
PROGRAM BUTTON on
your handheld or wall
remote until the motor
jogs 2x. Release when
motor stops jogging.

Program

Button

Program
Button

Program
Button

ADJUST MOTOR SPEED (Sonesse® 30 and Sonesse® 50 DC models ONLY)

1) Press and hold until the motor jogs. Shade will begin to move up and down automatically.

2) To increase motor speed: while shade is in motion, press and hold until motor jogs. Increase speed as desired.
When satisfied, press and hold to accept new speed.

3) To decrease motor speed, while shade is in motion press and hold until motor jogs. Decrease speed as desired.
When satisfied, press and hold to accept new speed.

©2018 Elite Window Fashions™

Page 2

2018 v.1