Page 1
OWNER’S MANUAL
RETAIN FOR FUTURE REFERENCE
TOLL FREE CUSTOMER SERVICE
1.888.800.1167
MODEL NUMBER: 52552
SERIAL NUMBER:
APPLICATION STANDARD
ASSEMBLY
OPERATING INSTRUCTIONS
CONDITIONING GUIDELINES
WARRANTY
SERVICE
EVO RIO GRANDE II Home Gym
Leg Press Attachment
Page 2
For future service or related
questions.
Please staple your receipt and/or
write in the name and phone number
of the retail store where you
preassembly
purchased your EVO home gym.
Name:
BEFORE BEGINNING
Phone Number:
Receipt:
Open the boxes
Y ou are now ready to open the boxes
of your new equipment. Make sure
to inventory all of the parts that are
included in the boxes. Check the
Parts List for a full count of the
number of parts included for this
product to be assembled properly.
If you are missing any parts or have
any assembly questions contact your
local Smooth Retailer.
Gather your tools
Before starting the assembly of
your unit, make sure that you have
gathered all the necessary tools you
may require to assemble the unit
properly. Having all of the necessary
equipment at hand will save time
and make the assembly quick and
hassle-free.
Clear your work area
Make sure that you have cleared
away a large enough space to
properly assemble the unit. Make
sure space is flat, level and free from
anything that may cause injury during
assembly. After the unit is fully
assembled, make sure there is a
comfortable amount of free area
around the unit for unobstructed
operation.
Invite a friend
Some of the assembly steps may
require heavy lifting. It is
recommended that you obtain the
assistance of another person when
assembling this product.
-2-
Page 3
NUMBER
DESCRIPTION
QUANTITY
part s list
ORDER NUMBER
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
LEG PRESS MAIN FRAME
FRONT STABILIZER
REAR CONNECT FRAME
FRONT CONNECT FRAME
ADJ BACK ARM
SEAT HANDLE BAR
FRONT LEG PRESS SUPPORT
REAR LEG PRESS SUPPORT
FOOT PLATE
FOOT PLATE CONNECTOR
BEARING HOUSING
LEG PRESS CABLE
BACK / SEAT PAD
1" X 5-1/2" HAND GRIP
3-1/2" PULLEY
2" SQ END CAP
2" SQ BUSHING
1" X 2" RECT END PLUG
1-3/4" X 3" RECT END PLUG
2" SQ END PLUG
CAP FOR 1/2" NUT
STOPPER
QUICK RELEASE
3/4" STEEL BUSHING
1
1
1
1
1
2
1
1
1
1
2
1
2
2
6
3
2
2
2
2
6
1
1
6
52552-201
52552-202
52552-203
52552-204
52552-205
52552-206
52552-207
52552-208
52552-209
52552-210
52552-211
52552-212
52552-213
52552-214
52552-215
52552-216
52552-217
52552-218
52552-219
52552-220
52552-221
52552-222
52552-223
52552-224
208
205
213
201
206
209
214
202
212
215
210
203
204
207
211
216
A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE
1/2
INCHES
217
221
3/41/4
1” 2” 3” 4”0
1/2
3/41/4
1/2
3/41/4
1/2
-3-
3/41/4
218
222
219
223
220
224
Page 4
NUMBER
DESCRIPTION
QUANTITY
ORDER NUMBER
part s list
225
226
227
228
229
230
231
232
233
234
235
236
237
AXLE
1/2" X 3" HEX HEAD BOLT
1/2" X 1-3/4" HEX HEAD BOLT
3/8" X 3" HEX HEAD BOLT
3/8" X 2-3/4" HEX HEAD BOLT
3/8" X 1-3/4" HEX HEAD BOLT
3/8" X 2-1/2" HEX HEAD BOLT
3/8" x 1-1/2" HEX HEAD BOLT
3/8" X 5/8" BUTTON HEAD SCREW
1/2" WASHER
3/8" WASHER
1/2" NYLON NUT
3/8" NYLON NUT
3
2
4
8
2
6
2
2
1
20
24
14
16
52552-225
52552-226
52552-227
52552-228
52552-229
52552-230
52552-231
52552-232
52552-233
52552-234
52552-235
52552-236
52552-237
234
225
227
231
229
235
232
236
226
228
230
233
237
A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE
3/41/4
0 1” 2” 3” 4”
1/2
INCHES
1/2
3/41/4
1/2
3/41/4
-4-
1/2
3/41/4
1/2
3/41/4
5”
1/2
3/41/4
6”
Page 5
part s diagram
219
234
224
234
236
228
201
210
234
224
236
235
228
236
224
234
236
220
221
236
236
221
216
225
207
234
225
221
236
234
234
236
234
222
233
224
202
237
236
221
211
225
208
227
234
234
221
234
236
214
227
MANY P ARTS SHOWN HAVE BEEN PRE-ASSEMBLED BY THE F ACT OR Y
236
226
234
216
215
230
234
221
206
237
213
231
209
235
235
215
215
219
213
218
214
235
230
223
217
206
237
237
204
218
235
235
232
235
237
216
237
220
205
203
235
237
230
215
237
235
235
229
235
228
-5-
Page 6
Step 1:
Only hand tighten fasteners for now.
You will be prompted to fully tighten all
fasteners later.
ASSEMBLY
Attach the Rear Connect Frame (203) to
the Base Frame (1) using two 3/8" x 2-3/4"
Hex Head Bolts (229), four 3/8" Washers
(235) and two 3/8" Nylon Nuts (237). Att ach
assembly instructions
the Front Connect Frame (204) to the Base
Frame (1) using two 3/8" x 3" Hex Head
Bolts (228), four 3/8" Washers (235) and
two 3/8" Nylon Nuts (237).
203
237
235
204
237
235
-6-
1
229
235
228
Page 7
Step 2:
Cap the Front Stabilizer (202) with two
50 Sq End Caps (216).
Attach the Front Stabilizer (202) to the
ASSEMBLY
Leg Press Main Frame (201) using two
1/2" x 3" Hex Head Bolts (226), four 1/2"
Washers (234) and two 1/2" Nylon Nuts
(236).
Cap the Leg Press Main Frame (201)
with one 50 Sq End Cap (216). Insert
the two 50 mm Sq Bushings (217) into
the Leg Press Main Frame (201). Insert
two 3/4" Steel Bushings (224) into the
sleeve on the Leg Press Main Frame
(201).
assembly instructions
Attach the Leg Press Main Frame (201)
to the Rear Connect Frame (203) and
to the Front Connect Frame (204) using
four 3/8" x 3" Hex Head Bolts (228),
eight 3/8" Washers (235) and four 3/8"
Nylon Nuts (237).
216
202
226
234
224
216
-7-
201
224
228
234
236
235
235
235
235
217
237
216
235
237
203
204
Page 8
Step 3:
Slide one 1" x 130 mm Hand Grip (214)
onto each Seat Handle Bar (206).
Should you find the Hand Grips (214)
difficult to slide on, try applying a small
ASSEMBLY
amount of soapy water to the Seat
Handle Bars (206) prior to sliding on the
Hand Grips (214).
Attach the Seat Handle Bars (206) to
assembly instructions
the Leg Press Main Frame (201) using
two 3/8" x 3" Hex Head Bolts (228), four
3/8" Washers (235) and two 3/8" Nylon
Nuts (237).
Attach the Back / Seat Pad (213) to the
Leg Press Main Frame (201) using two
3/8" x 2-1/2" Hex Head Bolts (231) and
two 3/8" Washers (235).
Cap the Adj Back Arm (205) with two
25 x 50 mm Rect End Plugs (218) and
one 50 Sq End Plug (220). Attach the
Back / Seat Pad (213) to the Adj Back
Arm (205) using two 3/8" x 1-1/2" Hex
Head Bolts (232) and two 3/8" Washers
(235).
Insert the Adj Back Arm (205) into the
Leg Press Main Frame (201) and lock
with the Quick Release (223).
214
228
201
235
235
206
213
231
213
218
218
220
205
232
235
223
206
235
237
214
-8-
Page 9
Step 4:
Slide one Bearing Housing (211) onto each
side of the axle on the Rear Leg Press Support
(208). Attach each Bearing Housing (211) to
the Leg Press Main Frame (201) using two 1/2"
ASSEMBLY
x 1-3/4" Hex Head Bolts (227), four 1/2"
Washers (234) and two 1/2" Nylon Nuts (236).
Attach the Front Leg Press Support (207) to
the sleeve on the Leg Press Main Frame (201)
using one Axle (225), two 1/2" Washers (234)
and two 1/2" Nylon Nuts (236).
207
236
234
225
234
211
236
assembly instructions
208
227
227
234
234
211
201
-9-
234
236
234
236
Page 10
Step 5:
Cap the Foot Plate Connector (210)
with one 50 Sq End Plug (220). Insert
the four 3/4" Steel Bushings (224) into
the holes in the Foot Plate Connector
ASSEMBLY
(210).
Attach the Foot Plate Connector (210)
to the Front Leg Press Support (207)
and the Rear Leg Press Support (208)
assembly instructions
using two Axles (225), four 1/2" W ashers
(234) and four 1/2" Nylon Nuts (236).
Cap the Foot Plate (209) with two 45 x
75 Rect End Plugs (219). Attach the
Foot Plate (209) to the Foot Plate
Connector (210) using two 1/2" Nylon
Nuts (236) and two 1/2" Washers (234).
Firmly tighten all bolts at this time.
Cap the 1/2" Nuts (236) on each side
of the three Axles (225) using six Caps
For 1/2" Nuts (221).
220
221
236
236
224
221
207
225
234
219
234
236
224
221
208
210
234
234
209
236
219
221
-10-
Page 11
19
T8
P4
P2
P1
P3
P5
P6
P8
P9
P11
P7
P12
P10
Page 12
Warranty Coverage: Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that each new product to be
free from defects in workmanship and material, under normal use and conditions.
Period of Coverage: The Warranty on this product runs for the period of the lifetime of the original purchaser. This is a Parts-
warranty
only Warranty, labor is not included. Smooth Fitness reserves the right to inspect damaged parts for misuse.
It is recommended that the Original Receipt be kept with the product manual.
WARRANTY
Remedy Provided by Smooth Fitness: Smooth Fitness will provide a replacement part free of charge if a defect is found during
the Warranty period. You must pay any charges for shipping and handling outside of the Continental United States and for labor.
To obtain service call your local Smooth Retailer.
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to
the original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth Fitness
products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the circumstances
but that the advice is used at your sole risk.
Procedure for Obtaining Your Remedy Under This Warranty: To obtain service call your local Smooth Retailer. To help us
assist you, please have the following information ready:
Serial number located on the frame of the unit; and
Limitations on Warranty: This Warranty will only apply to the original end user. This Warranty does not cover any problems,
damages or failures that are caused by accident, improper assembly, failure to observe cautionary labels on the product, failure
to operate the product correctly, abuse or freight damage. Smooth Fitness does not warrant against any damage or defect s that
may result from repair or alterations made to the product by an unauthorized repair facility.
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product shipped
or handled outside of the United States. This Warranty does not apply if the product is used for rental or commercial use.
Consequential and incidental damages are not recoverable under this Warranty. (Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.)
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS W ARRANTIES. ALL IMPLIED W ARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
ONE (1) YEAR FROM THE EFFECTIVE DA TE OF THIS W ARRANTY. SMOOTH FITNESS IS NOT LIABLE FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR ANY BREACH OF EXPRESS OR IMPLIED
WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE TERMS DESCRIBED
IN THIS FORM.
Model name or number from the cover of the manual;
The part description and the order number.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VAR Y FROM
STATE TO STATE.
For assistance with assembly or to order replacement parts, simply call your local Smooth Retailer. To help them assist you,
please have the following information ready:
Model name or number from the cover of the manual;
Serial number located on the frame of the unit; and
The part description and order number.
-12-
Page 13
Warning
Before using this product, please
consult your personal physician for
a complete physical examination.
Frequent and strenuous exercise
should be approved by your doctor.
If any discomfort should result from
your use of this product, stop
exercising and consult your doctor.
Proper usage of this product is
IMPORTANT STEPS
essential. Please read your manual
carefully before exercising.
Please keep all children away from
the equipment during use and when
equipment is unattended.
Always wear appropriate clothing,
including athletic shoes, when
exercising. Do not wear loose
clothing that could become caught
during exercising.
Make sure that all bolts and nuts are
tightened when equipment is in use.
Periodic maintenance is required on
all exercise equipment to keep it in
good condition.
Before beginning
How you begin your exercise
program depends on your physical
condition. If you have been inactive
for several years, or are severely
overweight, you must start slowly
and increase your time gradually, a
few minutes per week.
Initially you may be able to exercise
only for a few minutes in your target
zone. However, your aerobic fitness
will improve over the next six to eight
weeks. Don’t be discouraged if it
takes longer. It’s important to work
at your own pace. Ultimately, you’ll
be able to exercise continuously for
30 minutes. And the better your
aerobic fitness, the harder you will
have to work to stay in your target
zone. But remember these essentials:
>Contact your physician before
starting a workout or training
program. Have your doctor review
your training and diet programs to
advise you of a workout routine you
should adopt.
important step s
Monitor your pulse frequently. If you
do not have an electronic heart rate
monitor, have your physician show
you the proper way to manually check
your pulse by using your wrist or
neck. Establish your target heart rate
based on your age and
condition.
>Drink plenty of fluids during the
course of your routine. You must
replace the water content lost from
excessive exercising to avoid
dehydration. Avoid drinking large
amounts of cold liquids. Fluids should
be at room temperature when
consumed.
>Begin your training program slowly
with realistic goals that have been
set by you and your doctor.
>Supplement your program with
some type of aerobic exercise such
as walking, jogging, swimming,
dancing and/or bicycling.
-13-
Page 14
Finding your pulse
To make sure your heart is beating
in its target zone, you’ll need to know
how to monitor your heart rate. The
easiest way is to feel the pulse in
the carotid artery on either side of
target heart rate
your neck, between the windpipe
and the large neck muscles. Count
200
190
180
170
160
150
EXERCISING IN YOUR TARGET ZONE
140
130
120
110
100
PULSE IN BEATS PER MINUTE
90
80
70
the number of beats in ten seconds,
then multiply by six. This gives you
the number of beats per minute.
How fast should your heart beat
during aerobic exercise? Fast
enough to reach and stay in its
ADVANCED • Sports, athletic conditioning or
interval training
FITNESS • Optimal training, aerobic
HEALTH • Beginner, low intensity with long
duration produces fat burning
“target zone,” a range of beats per
minute that is largely determined by
your age and physical condition. To
determine your target zone, consult
the chart we have provided.
or cardiovascular
20 25 30 35 40 45 50 55 60 65 70
Aerobic exercise is any
sustained activity that sends oxygen
to your muscles via your heart and
lungs. It will improve the fitness of
your lungs and heart: your body’s
AGE IN YEARS
most important muscle. Aerobic
fitness is promoted by any activity
that uses your large muscle groups
- arms, legs or buttocks, for example.
Your heart beats quickly and you
-14-
breath deeply. An aerobic exercise
should be part of your entire exercise
routine.
Page 15
The exercise routine that is
performed on this product will
develop lower body muscle groups.
These muscle groups are shown
on the chart below.
MUSCLE CHART
Trapezius
Anterior Deltoid
Pectoralis Major
Serratus Anterior
Bicep
Abdominals
Sartorius
muscle chart
Posterior Deltoid
Triceps
Latissimus Dorsi
Gluteals
Quadriceps
Tibialis
Hamstrings
Gastrocnemius
(Calf)
-15-
Page 16
A successful exercise program
consists of a warm-up, aerobic
exercise, and a cool-down. Do the
entire program at least two and
preferably three times a week, resting
for a day between workouts. After
several months, you can increase
your workouts to four or five times
per week.
stretching routine
Warming up is an important part of
your workout, and should begin every
session. It prepares your body for
more strenuous exercise by heating
up and stretching out your muscles,
increasing your circulation and pulse
WARM UP AND COOL DOWN
rate, and delivering more oxygen to
your muscles. At the end of your
workout, repeat these exercises to
reduce sore muscle problems. We
suggest the following warm-up and
cool-down exercises:
Inner Thigh Stretch
Sit with the soles of your feet together
with your knees pointing outward. Pull
your feet as close into your groin as
possible. Gently push your knees
towards the floor. Hold for 15 counts.
Hamstring Stretch
Sit with your right leg extended. Rest the sole
of your left foot against your right inner thigh.
Stretch toward your toe as far as possible.
Hold for 15 counts. Relax and then repeat
with left leg extended.
Head Roll
Rotate your head to the right for one count,
feeling the stretch up the left side of your
neck. Next, rotate your head back for one
count, stretching your chin to the ceiling
and letting your mouth open. Rotate your
head to the left for one count, and finally,
drop your head to your chest for one count.
-16-
Page 17
Shoulder Lift
Lift your right shoulder up toward
your ear for one count. Then lift
your left shoulder up for one
count as you lower your right
shoulder.
stretching routine
Calf-Achilles Stretch
Lean against a wall with your left leg in
front of the right and your arms forward.
Keep your right leg straight and the left
foot on the floor; then bend the left leg
and lean forward by moving your hips
toward the wall. Hold, then repeat on
the other side for 15 counts.
Side Stretch
Open your arms to the side and continue
lifting them until they are over your head.
Reach your right arm as far upward
toward the ceiling as you can for one
count. Feel the stretch up your right side.
Repeat this action with your left arm.
-17-
Toe Touch
Slowly bend forward from
your waist, letting your back
and shoulders relax as you
stretch toward your toes.
Reach down as far as you can
and hold for 15 counts.
Page 18
notes
NOTES
-18-
Page 19
NOTES
notes
-19-
Page 20
Smooth Fitness
717 Fellowship Road
Suite C
Mt. Laurel, NJ 08054
Copyright © 2002
Loading...