Sloan EAF-225-P-ISM User Manual

Electronic Hand Washing Faucet

Description

6 VDC (nominal) Adapter Powered, Sensor Activated, Electronic Hand Washing Faucet for pre-tempered
or hot and cold water operation with illuminated Temperature Indication Ring.

6 VDC (nominal) Plug-in Adapter Powered Models with Adapter (-P)

 EAF-225-P-ISM With Integral Spout Temperature Mixer

 EAF-225-P-ISM-IC With Integral Spout Temperature Mixer and

(For Hot and Cold water supply connection)

i.q.-Click

Feature

 EAF-225-P-ISM-DPU-IC With Integral Spout Temperature Mixer, Drain Pop Up

and

i.q.-Click

Feature

Flow Rate

 1.5 gpm / 5.6 Lpm – Spray Head

Specifications

Sensor Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing Faucet with the following
features:

• Indicates the adjusted water temperature via illuminated LED color changing ring

• Standby mode (option) permits light ring to remain illuminated with dim white light

• Soft-off function of indicator light. Light is turned off softly after the water ow stops

• Hot adjustable water limit set point

• Modular One-piece Construction with all Concealed Components above deck

• Double Infrared Sensors with Automatic Setting Feature and Microprocessor

• Magnetic Solenoid Valve

• Water temperature revealed by Illuminated Temperature Indication Ring

• Water temperature can be user adjusted

• Standby Mode permanently illuminates ring with dimmed white light

• Security-off after 1 minute of continuous water ow (vandal-resistant construction)

• Water Supply Connection with Flexible High-pressure Hose and Strainer

• Appropriate Mounting Hardware included

Variations

 IC

i.q.-Click

feature

 DPU Drain Pop Up

Accessories

• Trim Plates

 ETF-312-A Trim Plate for 4” (102 mm) Centerset Sink

  ETF-510-A Trim Plate for 8” (204 mm) Centerset Sink
Trim Plates must be specied and ordered separately

• Spout End Devices
 EAF-102.2 gpm/8.3 Lpm Aerated Stream Spray Head
 EAF-13 2.2 gpm/8.3 Lpm Laminar Stream Spray Head
 EAF-53 1.5 gpm/5.7 Lpm Laminar Stream Spray Head
 EAF-54 1.0 gpm/3.8 Lpm Laminar Stream Spray Head
 EAF-51 0.35 gpm/1.3 Lpm Multi-Stream Laminar Spray Head

• Plug-in Adapter (one faucet per Adapter)

  EAF-41 European Plug-in Adapter

 EAF-39 United Kingdom Plug-in Adapter

• Extension Cables

  EAF-24-A 11-13/16” (300 mm) Extension Cable
  EAF-25-A 47-1/4” (1200 mm) Extension Cable
  EAF-17-A 126” (3200 mm) Extension Cable

• Faucet Extension Kits

 EAF-35-A Faucet Extension Kit
 EAF-30-A Faucet Extension Kit (International Version has 1/2G inlet connections)

Warranty

3 year (limited)

Compliant to: ASME A112.18.1-2005/CSA B125.1-05, ISO/IEC 17025

BLUE

Cold Water

Position

Tempered Water

Position

RED

Hot Water

position

Sloan’s Lumino — complementing intelligence and operation
within a restroom setting.

The Sloan Lumino Electronic Faucet visibly shines in it’s ability to regulate
water temperature. Sloan’s Lumino is part of the Sloan Designer Series of
ttings, designed to work in perfect unison with a restroom’s décor.

The

i.q.-Click

function modes, including “continuous run” and “temporary off” simply
by pressing a button on the spout. The use of the
recommended only in installations where users have a regular familiarity with
the faucet (i.e., executive and non-public rest rooms). Models furnished with
the

i.q.-Click

feature allows the user to place the faucet into optional

i.q.-Click

feature is

feature are also available with a Drain Pop Up.

Automatic

Sloan’s Lumino Deck-Mount Electronic Faucet operates by means of an
infrared sensor.

Hygienic

Touch-free, electronically controlled lavatory faucet. The ultimate in sanitary
protection — helps control the spread of bacteria.

Aesthetic

The Sloan Lumino Deck-Mount Electronic Faucet brings Sloan’s quality into a
one-of-a-kind electronic sensor faucet that works in unison with virtually any
restroom.

Economical

Automatic operation provides water usage savings up to 40% over manually
operated faucets. Sensor operation ensures reduced maintenance and
operation costs.

This space for Architect/Engineer approval

Job Name Date

Model Specied Quantity

Optima i.q. Lumino EAF-225 10-13

Variations Specied

Customer/Wholesaler

Contractor

Architect

The information contained in this document is subject to change without notice.

Description

6 VDC (nominal) Adapter Powered, Sensor Activated, Electronic Hand Washing Faucet for pre­tempered or hot and cold water operation with illuminated Temperature Indication Ring.

Flow Rate

 1.5 gpm / 5.6 Lpm – Spray Head

ELECTRICAL SPECIFICATIONS

Control Circuit

6 VDC — Includes Auto Set Range
Adjustment

Sensor Range

Nominal:
4”-5” (102 mm - 127 mm)
Faucet Adaptive Self-adjustment Range:
2”-14” (51 mm - 356 mm) nominal

Power Supply

120 VAC †/ 6.75 VDC Plug-in Adapter

† All EAF-series plug in adapters handle an input

voltage range of 90-264 VAC. One faucet per
Adapter. Do not gang.

Time Out Setting

2 minutes — Maximum time faucet will
run upon continuous detection (except for
i.q.-Click models that are otherwise set in
continuous run).

OPERATION

As the user’s hands enter the beam’s effective range, the beam
is reected back into the sensor receiver and activates the
solenoid valve allowing water to ow from the faucet. Water will
ow until the hands are removed or until the faucet reaches its
automatic time out limit setting.

-Click

FEATURE

The

i.q.-Click

is a button that extends from the underside of the faucet spout that
allows the user to place the faucet into the following function modes: Continuous
Run, Temporary Off, Permanent Off and Auto Set Range Adjustment.

Because the use of the

i.q.-Click

feature requires familiarity with the faucet, this
feature is not recommended for faucets intended for use by the general public.
The

i.q.-Click

is ideal for use in hospital rooms, executive restrooms and other

locations where the primary user has regular contact with the product.

-Click SETTINGS

Function Press Button LED Signal

Continuous Run — 2 minute

default setting (adjustable

from 1 - 20 minutes)

reset:

Temporary Off 2 times (double click)

reset:

Auto Set Range Adjustment

1 time for 2 seconds 5 short ashes

1 time or will reset

automatically after 2 minutes

5 short ashes followed by

periodic ashing

1 time or will reset

automatically after 2 minutes

2 times (double click) and then

1 time for 5 seconds

5 short ashes followed by 4

short ashes

EAF-225-ISM, EAF-225-ISM-IC AND

EAF-225-ISM-DPU-IC

Faucets with Hot and Cold Water Supply

O-RING

GASKET

RETAINER

NUT

HOT
SUPPLY

SPOUT

13” (330 mm)

LONG FLEX

HOSES

MIXING LEVER

1-3/16” (30 mm)

REQUIRED

MIN. DIA. HOLE

1-1/2” (38 mm)

MAX. DECK
THICKNESS

COLD
SUPPLY

When the EAF faucet is installed on a sink that has three (3) hole punchings, a Trim
Plate should be used. Trim Plates must be specied and ordered separately:

ETF-312-A

Trim Plate for 4” (102 mm) Centerset Sink

ETF-510-A

Trim Plate for 8” (204 mm) Centerset Sink

4-11/32”
(110 mm)

2-1/16”
(52 mm)

24º

5-11/32”
(136 mm)

2-1/16”
(52 mm)

2-9/16”
(65 mm)

Optional EAF-35-A Faucet

Extension Kit

6-11/16”
(170 mm)

SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131

Phone: [phone] or 1-847-671-4300 • Fax: [phone] or 1-847-671-4380 • www.sloanvalve.com

© 2013 Sloan Valve Company Optima i.q. Lumino EAF-225 10-13