Page 1
TM
Push-Tite
Flange Extension
This application is perfect for situations where a closet flange
needs to be added, and the 4" drain pipe is well below the finished floor.
ITEMS NEEDED:
1. Pipe saw, tape measure, screws, screwdriver, primer, glue
2. Push-Tite Gasketed Closet Flange (887-GPM, 887-GAM)
3. 3" Sch. 40 ABS/PVC pipe
Step 1
Cut the hub of the Push-Tite, approximately 1¼"
up from the bottom lip of the hub.
Step 2
Measure the distance from the top of the drain pipe to the
top edge of the finished floor (this distance is X), then add
2" to this measurement.
Exclusive
Feature!
Step 3
Cut a piece of 3" Sch. 40 pipe (X+2" long). Glue this piece
of pipe between the top and bottom halves of the Push-Tite
closet flange.
Step 4
Lubricate the gasket (use bowl wax, silicone, stem grease,
liquid soap, etc.) and push the pipe/flange assembly down
into the 4" drain pipe.
Step 5
Secure the flange to the floor with screws and
proceed with standard closet installation.
SDv1-6/03 PUSH-TITE FLANGE EXTENSION © 2003 SIOUX CHIEF MFG.
Loading...