Page 1
Replacing a Saddle Valve with the
™
Add-A-Line
Full-Slip Valve Tee
Perfect for adding ice makers, humidifi ers,
•
hot water taps, or fi ltered water taps
Easy to install
•
Quality brass valve replaces cheap
•
saddle valve that leaks and clogs
See enclosed brochure for
•
additional valve options.
1
5
Hold
Tighten
Turn off house water.
With a permanent marker,
mark the tube at the outside
and inside of each brass
compression fi tting of the
Add-A-Line.
Slide a compression nut and a
brass ferrule over each section
of cut tube. Then, slip the
Add-A-Line over one section
of tube, then the other,
lining up the compression
threads with the outer marks.
Slide the top compression
nut and the brass ferrule (for
copper tube) or the plastic
ferrule (for poly tube) over the
line to the appliance. Tighten
the compression nut onto the
Add-A-Line.
2
43
Tighten
6
Cut
Turn off house water. Cut out a
one inch section of copper tube,
including the piercing valve. Cut
the fl exible line to the ice maker
or humidifi er. Be sure to leave
enough line to reach the new
Add-A-Line.
Hold
With two wrenches, tighten each
compression nut. Take care not
to over tighten.
Turn on house water. Check for
leaks.
Page 2
™
Add-A-Line
Clamshell Packaging
in Display Boxes
Item No. Trunk Ball Valve Tee
601-20CV ⅝” O.D. compression full-slip ¼” O.D. compression 6 6 27.29
601-30CV ⅞” O.D. compression full-slip ¼” O.D. compression 6 6 33.99
601-21CV ⅝” O.D. compression full-slip ⅜” O.D. compression 6 6 25.24
601-31CV ⅞” O.D. compression full-slip ⅜” O.D. compression 6 6 34.32
601-22CVM ⅝” O.D. compression full-slip ½” FSWT/MIP thread 6 6 26.10
601-32CVM ⅞” O.D. compression full-slip ½” FSWT/MIP thread 6 6 34.92
601-22CVX ⅝” O.D. compression full-slip ½” PEX barb 6 6 25.25
601-32CVX ⅞” O.D. compression full-slip ½” PEX barb 6 6 34.79
601-20V ½” female sweat full-slip ¼” O.D. compression 6 6 20.33
601-30V ¾” female sweat full-slip ¼” O.D. compression 6 6 21.04
601-21V ½” female sweat full-slip ⅜” O.D. compression 6 6 18.30
601-31V ¾” female sweat full-slip ⅜” O.D. compression 6 6 19.41
601-22VM ½” female sweat full-slip ½” FSWT/MIP thread 6 6 19.16
601-32VM ¾” female sweat full-slip ½” FSWT/MIP thread 6 6 20.18
601-22VX ½” female sweat full-slip ½” PEX barb 6 6 18.08
601-32VX ¾” female sweat full-slip ½” PEX barb 6 6 19.18
DISTRIBUTED BY
REPLACING A SADDLE VALVE - 9/06 © 2006 SIOUX CHIEF MFG.
BAR-CODED CLAMSHELLS IN A CUT CASE BOX
tel: 1-800-821-3944
fax: 1-800-758-5950
www.siouxchief.com
P.O. Box 397
24110 South Peculiar Drive
Peculiar, Missouri 64078 U.S.A.
Min.
Qty.
Case
Qty.
List
Price
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
Loading...