Siemens Welder IPC227D User Manual

Product Data Sheet

SIMATIC IPC227D

SIMATIC IPC227D available for implementing simple control, data collector or communication tasks:

• Maximum compactness with approx. 1 liter enclosure volume or more with integrated industrial power supply for minimum space requirements in the control cabinet

• Maximum flexibility thanks four mounting options and interfaces on one side suitable for every installation situation

• Optimum variety of interfaces due to a large number of integrated interfaces such as a selectable serial port (RS232/RS485/CAN) and 2 x teaming-capable Gigabit LAN

• Maximum industrial functionality due to closed enclosure for optimum dust protection and non-volatile retentive memory

• Further device options for optimum adaptation to the application with additional PCIe slot or RS232 interfaces or digital I/O

Design

Basic design

• All-metal enclosure, resistant to vibrations and shocks, also with high electromagnetic compatibility

• Onboard graphics, DVI (digital)

- DVI-D resolution: Up to 1920 x 1200 pixels

• Optical drives can be connected externally via USB interface, not included in scope of supply

• Interfaces (accessible from one side):

- 2 x LAN 10/100/1000 Mbit/s Ethernet interface (RJ45)

- 4 x high-speed USB V2.0

- 1 x COM1 (RS232)

• Fieldbus

- PROFINET Realtime via Standard Ethernet interface

- Isolated power supply: 24 V DC (20.4 to 28.8 V)

Design versions

• Processor / main memory configuration:

- Intel Atom E660 1.3 GHz, 2 GB RAM

- Intel Atom E640 1.0 GHz, 1 GB RAM

- Intel Atom E620 600 MHz, 512 MB RAM

• Retentive memory

- 512 KB retentive memory (MRAM), 128 KB of which can be written to within the buffer time (optional)

• Hardware expansion as device versions:

-COM2-4

- 4 dig. inputs/outputs each, 24 V

- 1 PCIe slot (x1)

• Drives:

- CompactFlash drive (replaceable, accessible): 2 GB, 4 GB, 8 GB or 16 GB

- Solid-State Drive 50 GB (High Endurance), 2.5"

- Solid-State Drive 80 GB (Standard), 2.5"

- Hard disk 250 MB Serial ATA, 2.5"

• Preinstalled operating systems:

- Windows XP Embedded Standard 2009

- Windows XP Professional Multi-Language

- Windows Embedded Standard 7

- Windows 7 Multi-Language, 32-bit

SIMATIC IPC227D (bottom side), basic version:

SIMATIC IPC227D (bottom side), COM version:

1/7

SIMATIC IPC227D (bottom side), IO version:

SIMATIC IPC227D (bottom side), PCIe version:

Expansion components

SIMATIC IPC DiagMonitor

• PC diagnostics/alarm software for early detection and diagnostics of PC problems

• Comprehensive monitoring of temperature, watchdog

• Operating hours counter for preventive maintenance

• Integrated log functions, comprehensive text messages, online help (English/German)

• Network-wide monitoring via SNMP and OPC interface possible

SIMATIC IPC Image & Partition Creator

• Software tool for preventive data back-up of the contents of bulk storage (CF cards, hard disks, SSD)

• High-speed restoring of system and data partitions with bit accuracy; user software and special installations are also backed up

• Software tool for adaptation of mass storage partitioning

SIMATIC IPC Service USB FlashDrive

• Mobile memory medium for backing up/restoring mass memories

• Pre-installed Image & Partition Creator V3.1

• Ultra-compact and rugged

SIMATIC IPC227D bundles: HMI, RTX, RTX F and HMI/RTX

HMI, RTX, RTX F and HMI/RTX complete turnkey solutions (the software is already preinstalled and configured) for visualization and automation in combination with WinCC RT Advanced and WinAC RTX 2010 /F

• Quick start in automation solutions with Embedded Automation

• HMI: SIMATIC WinCC RT Advanced preinstalled and ready to run

• RTX: SIMATIC WinAC RTX 2010 preinstalled and ready to run

• RTX F: SIMATIC WinAC RTX 2010 F preinstalled and ready to run

• HMI/RTX (F): SIMATIC WinCC RT Advanced and SIMATIC WinAC RTX 2010(F) preinstalled and ready to run

• PROFINET (RT) pre-configured for use in a SIMATIC environment

• Configuration and programming with SIMATIC WinCC Engineering System and SIMATIC STEP 7 via Industrial Ethernet

• Flexibility of a PC-based automation environment

• Open for additional PC applications

• Connection option for USB devices

• Use of WinAC ODK with SIMATIC WinAC RTX

• Data retentivity for WinAC RTX without uninterruptible power supply (UPS)

2/7

Technical specifications SIMATIC IPC227D

SIMATIC Box PC

Design Rail, wall, portrait or side mount-

Processor • Intel Atom E620 600 MHz,

Chipset Intel Controller Hub EG20T

Buffered MRAM 512 KB, of which 128 KB can be

Free slots for expansions Optional PCIe expansion slot

Graphics • Integrated into Intel Atom

Operating system • without

Power supply •24VDC (20.4V ... 28.8V)

SIMATIC IPC227D

ing

512 MB RAM

• Intel Atom E640 1.0 GHz, 1 GB RAM

• Intel Atom E660 1.3 GHz, 2 GB RAM

written within the buffer time

CPU E6xx

• 8 to 256 MB (shared memory), 1920 x 1200, 60 Hz, 32-bit colors

• Windows Embedded Standard 2009 preinstalled, in combination with CF card or solid-state drive or hard drive (optional)

• Windows XP Professional MUI preinstalled (in combination with solid-state drive or hard drive; MUI: Multi Language User Interface) (optional)

• Windows Embedded Standard 7, 32-bit, preinstalled, in combination with CF card or solidstate drive or hard drive (optional)

• Windows 7 Ultimate MUI 32 bit preinstalled (in combination with solid-state drive or hard drive; MUI: Multi Language User Interface) (optional)

•Linux 1) (project-specific, on request)

• RMOS (project-specific on request)

• Others on request project-specifically

•Isolated

• With buffering of temporary power failures: max. 10 ms

• Line side switch

• With power failure indication by means of Power Fail signal

SIMATIC Box PC

Drives

Flash drive Optional; replaceable,

Solid State Drive (SSD)

Hard disk Optional 250 GB SATA

CD-ROM Via USB (not included in scope of

DVD-RW Via USB (not included in scope of

Floppy disk Via USB (not included in scope of

Interfaces

PROFINET PROFINET RT via Standard Ether-

PROFIBUS/MPI -

Ethernet • 2 x 10/100/1000 Mbit/s (RJ 45)

USB V2.0/High Speed: 4 x

Serial COM1 (V.24), optional COM2-4

DVI-I 1 x DVI-D

Keyboard Via USB (not included in scope of

Mouse Via USB (not included in scope of

Monitoring functions

Temperature • Processor temperature

SIMATIC IPC227D

accessible, diagnosable

•2GB

•4 GB

•8GB

•16 GB

Optional:

• 50 GB SATA, High Endurance,

2.5"

• 80 GB SATA, Standard, 2.5"

delivery)

net controller

• Two independent Intel Controllers: Intel 82574L / Intel Controller Hub EG20T

• With teaming function

delivery)

•Motherboard

Messages can be evaluated by the application program

3/7

+ 4 hidden pages