Siemens RF350R02, RF310R02, RF340R02 Users Manual
A
A.1
Certificates and approvals
Labeling
Description
Notes on CE marking
DIN ISO 9001 certificate
Country-specific approvals
Safety
Labeling
Description
Underwriters Laboratories (UL) according to Canadian standard C22.2
(IND.CONT.EQ)
142 or C22.2 NO. 61010-1-12 (IND.CONT.EQ)
All the latest RFID radio approvals are available on the Internet
(http://www.siemens.com/rfid-approvals
The following applies to the system described in this documentation:
The CE marking on a device indicates the corresponding approval.
).
Conformity acc. to the RED EU directive
The quality assurance system for the entire product process (development, production, and
marketing) at Siemens fulfills the requirements of ISO 9001 (corresponds to EN29001:
1987).
This has been certified by DQS (the German society for the certification of quality
management systems).
EQ-Net certificate no.: 1323-01
If the device has one of the following markings the corresponding approval has been
obtained:
Underwriters Laboratories (UL) to UL 60950 Standard (I.T.E), UL508
or UL61010-1/UL61010-2-201 (IND.CONT.EQ)
No. 60950 (I.T.E), C22.2 No. 142 or C22.2 NO. 61010-1-12
Underwriters Laboratories (UL) according to Standard UL 60950,
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
Report E11 5352 and Canadian standard C22.2 No. 60950 (I.T.E),
UL508 or UL61010-1/UL61010-2-201 (IND.CONT.EQ) and C22.2 No.
405
Appendix
Labeling
Description
63533)
IC: 267X-RF...
Mexico (COFETEL)
Mexico (COFETEL)
CMIIT ID: XXXXYYZZZZ
A.1 Certificates and approvals
Canada (IC) Canada (IC)
UL recognition mark
Canadian Standard Association (CSA) acc. to standard C22.2. No.
60950 (LR 81690), C22.2 No. 142 or C22.2 NO. 61010-1-12 (LR
Canadian Standard Association (CSA) acc. to American Standard UL
60950 (LR 81690), UL508 or UL61010-1/UL61010-2-201 (LR 63533)
This product meets the requirements of the AS/NZS 3548 Norm.
USA (FCC)
This device complies with Part 15 of the FCC Rules.
FCC ID: NXW-RF...
This device complies with Industry Canada licence-exempt RSS
standard(s).
Russia, Belarus and Kazakhstan
Brazil (ANATEL)
China (CMIIT) China (CMIIT)
ANATEL-ID: XXXX-YY-ZZZZ
South Africa (ICASA)
South Korea (KCC)
Japan (VCCI)
SIMATIC RF300
406 System Manual, 07/2016, C79000-G8976-C345-0x
Appendix
A.2
Accessories
A.2.1
Transponder holders
Product photo
Insertable transponders
Characteristics
Spacer for mounting on metal, in conjunction with the
A.2 Accessories
Table A- 1 Overview of the transponder holders and spacers
6GT2190-0AA00
6GT2190-0AB00
6GT2390-0AA00
• MDS D100
• MDS D200
• MDS D400
• MDS E600
• MDS E611
• RF360T
• MDS D100
• MDS D200
• MDS D400
• MDS E600
• MDS E611
• RF360T
• MDS D100
• MDS D200
• MDS D400
• MDS E600
• MDS E611
•
fixing pocket 6GT2190-0AB00
• Distance from transponder to metal: 25 mm
• Mounting: 4 x M4 screws
• Material: PA6
• Weight: 31 g
• Dimensions (L x W x H): 110 x 62 x 24 mm
• Fixing pocket in conjunction with spacer 6GT2190-
0AA00
• Mounting:
– Locks into spacer
– 2 x screws/nails
– Tacked
• Material: PA6
• Weight: 12 g
• Dimensions (L x W x H): 121 x 57 x 5 mm
• Fixing pocket not suitable for mounting directly on
metal
• Mounting: 2 x M4 countersunk screws
• Material: PA6
• Weight: 21 g
• Dimensions (L x W x H): 110 x 65 x 5 mm
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
407
Appendix
Product photo
Insertable transponders
Characteristics
A.2 Accessories
6GT2690-0AA00
6GT2690-0AH00
6GT2690-0AH10
• MDS D139
• MDS D339
• MDS D139
• MDS D339
• MDS D139
• MDS D339
• Spacer for mounting on metal
• Distance from transponder to metal: 30 mm
• Mounting: 1 x M5 stainless steel screw
• Tightening torque: 1.5 Nm
• Material: PPS
• Weight: 50 g
• Dimensions (Ø x H): 85 x 30 mm
• Quick change holder for mounting on metal
• Distance from transponder to metal: 30 mm
• Mounting: Screw-in
• Material: Stainless steel VA
• Weight: 80 g
• Dimensions (Ø x H): 22 x 60 mm
• Quick change holder for mounting on metal
• Distance from transponder to metal: 30 mm
• Mounting: Screw-in
• Material: Stainless steel VA
• Weight: 60 g
• Dimensions (Ø x H): 22 x 47 mm
• MDS D124
• MDS D324
• MDS D424
• MDS D524
6GT2690-0AK00
SIMATIC RF300
• Spacer for mounting on metal
• Distance from transponder to metal: 15 mm
• Mounting: 1 x M4 countersunk screw
• Tightening torque: ≤ 1 Nm
• Material: PPS
• Weight: Approx. 4 g
• Remounting cycles: min. 10
• Dimensions (Ø x H): 36 x 22 mm
408 System Manual, 07/2016, C79000-G8976-C345-0x
Appendix
Product photo
Insertable transponders
Characteristics
A.2 Accessories
6GT2690-0AL00
6GT2690-0AG00
• MDS D126
• MDS D426
• MDS D526
• MDS E624
• MDS D160
• MDS D460
• Spacer for mounting on metal
• Distance from transponder to metal: 25 mm
• Mounting: 1 x M4 countersunk screw
• Tightening torque: ≤ 1 Nm
• Material: PA6
• Weight: Approx. 12 g
• Remounting cycles: min. 10
• Dimensions (Ø x H): 59 x 30 mm
• Spacer for mounting on metal
• Distance from transponder to metal: 10 mm
• Mounting: 1 x M3 countersunk screw
• Material: PA6
• Weight: 2 g
• Dimensions (Ø x H): 20 x 14 mm
6GT2690-0EA00
• MDS D423
• RF330T
• Fixing hood
• Mounting: 2 x M4 or 2 x M5 screws with max. head
diameter of 9.5 mm
• Tightening torque ≤ 0.8 Nm (M4 only with flat wash-
er)
• Material: PPS
• Weight: 3 g
• Dimensions (L x W x H): 49.4 x 20 x 9.8 mm
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
409
Appendix
Dimensional drawings
A.2 Accessories
Figure A-1 Dimension drawing of spacer 6GT2190-0AA00 with fixing pocket 6GT2190-0AB00
Figure A-2 Dimension drawing of fixing pocket 6GT2390-0AA00
SIMATIC RF300
410 System Manual, 07/2016, C79000-G8976-C345-0x
Appendix
A.2 Accessories
Figure A-3 Dimension drawing of spacer 6GT2690-0AA00
Figure A-4 Dimension drawing of quick change holder 6GT2690-0AH00
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
411
Appendix
A.2 Accessories
Figure A-5 Dimension drawing of quick change holder 6GT2690-0AH10
Figure A-6 Dimension drawing of spacer 6GT2690-0AK00
Figure A-7 Dimension drawing of spacer 6GT2690-0AL00
SIMATIC RF300
412 System Manual, 07/2016, C79000-G8976-C345-0x
Appendix
A.2 Accessories
Figure A-8 Dimension drawing of spacer 6GT2690-0AG00
Figure A-9 Dimension drawing of fixing hood 6GT2690-0EA00
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
413
Appendix
A.2.2
MOBY I migration
NOTICE
Changed field geometry
A.2 Accessories
The RF300 readers of the new generation provide the option of simple migration of existing
MOBY I systems to SIMATIC RF300. The so-called MOBY I emulation processes frames of
the MOBY I protocol on its serial interface and communicates with the established RF300
transponders.
If the RF300 reader is connected to a communications module with MOBY I capability, the
reader automatically recognizes the serial protocol and sets the MOBY I protocol. As a
communications module with MOBY I capability, all the communications modules sold for
MOBY I count regardless of the mode in which the MOBY I communications modules are
operated. This property allows even projects with the ECC mode turned on or with file
handlers to be migrated.
Communication modules with MOBY I capability:
RF180C, RFID 181EIP, RF170C, ASM 456, ASM 475, ASM 470, ASM450, ASM 451, ASM
452, ASM 472, ASM 473, ASM 424, ASM 454, ASM 400, CM 422, CM 423, ASM 410, ASM
420, ASM 421, ASM 440, ES030
With the aid of the adapter cable (0.3 m; article number 6GT2091-4VE30) you can migrate
existing MOBY I projects without needing to re-cable the connected RFID devices.
The transfer is as usual with MOBY I with a transmission speed of 19.2 kBd. The
transmission speed in the application is identical (or slightly slower) than with the original
MOBY I hardware.
When replacing MOBY I components with RF300 components note that the field geometry
changes.
SIMATIC RF300
414 System Manual, 07/2016, C79000-G8976-C345-0x
Appendix
Design of the Y adapter
①
Power
Optional 24 VDC supply voltage, M12 plug, 4-pin
②
TxD
③
RF300
Connector for RF 300 reader; M12 socket, 8-pin
④
175201-804
l = 0.5 m
Command set
A.2 Accessories
With the aid of the Y adapter (article number 6GT2090-4VE00) a slow migration of a MOBY I
application to RF300 is possible. The Y adapter is mounted in the vicinity of a MOBY I SLG.
It forwards signals of a communications module both to the MOBY I SLG and to the RF300
readers to be newly installed. The transponder commands are handled either with a MOBY I
transponder or with an RF300 transponder. To do this, no change to the MOBY I application
is necessary.
ASM
MOBY l Connector for the MOBY I reader; SLG socket (angled), plug, 6-pin acc. to EN
Figure A-10 Connection graphic of the MOBY Y adapter for MOBY I
Connector for the communications module; SLG plug, 6-pin acc. to EN 175201-804
The command set of the MOBY I readers is supported by the RF300 readers. You will find a
list of the commands and a description of the commands in the manuals "FB 45" and "FC
56". These manuals can be found in the archive of the DVD "Ident Systems Software &
Documentation" (6GT2080-2AA20).
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
415
Loading...