Readers
5.5 RF350R
ANT 30
The ANT 30 is designed for use in small assembly lines. In comparison to ANT 18, the maximum write/read distance is approximately 60 % larger. Due to its compact construction, the antenna can be easily positioned for any application using two plastic nuts (included in the package). The antenna cable can be connected at the reader end. With the RF320T, RF340T and RF350T tags, communication with the data storage unit is only possible in static mode.
5.5.10.2Ensuring reliable data exchange
The "center point" of the transponder must be situated within the transmission window.
SIMATIC RF300 |
111 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.5 RF350R
5.5.10.3Metal-free area
The antennas ANT1, ANT18 and ANT30 can be flush-mounted on metal. Please allow for a possible reduction in the field data values.
0HWDO IUHH DUHD IRU IOXVK PRXQWLQJ
a = 40 mm
0HWDO
a |
a |
a
a
h > 20 mm
h > 20 mm QRW D PHWDOOLF EDVH
Figure 5-11 Metal-free area for ANT 1
|
D |
PP |
|
E |
PP |
D 02%< ( |
0HWDO IUHH DUHD IRU |
|
|
IOXVK PRXQWLQJ |
|
$17 |
|
|
1RWH ,I WKH PHWDO IUHH DUHD LV QRW REVHUYHG WKH OLPLW DQG RSHUDWLQJ GLVWDQFHV DUH UHGXFHG
D
E
$17
Figure 5-12 Metal-free area for ANT 18
112 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.5 RF350R
D
E
D
02%< (
$17
D PP |
|
E PP |
6LGH YLHZ |
3ODQ YLHZ
Figure 5-13 Metal-free area for ANT 30
SIMATIC RF300 |
113 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.5 RF350R
5.5.10.4Minimum distance between antennas
'D
$17 |
$17 |
'E
'DB! PP 'EB! PP
$17
7KH UHDGHU HOHFWURQLFV FDQ EH PRXQWHG GLUHFWO\ DORQJVLGH HDFK RWKHU
Figure 5-14 Minimum distance for ANT 1
'D
'D
'D PP
Figure 5-15 Minimum distance for ANT 18
114 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.5 RF350R
'D
'D
'D! PP
Figure 5-16 Minimum distance for ANT 30
SIMATIC RF300 |
115 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.5 RF350R
5.5.10.5Technical data for antennas
Table 5-6 |
Technical data for antennas ANT1, ANT18 and ANT30 |
|
||
|
|
|
|
|
|
Antenna |
ANT1 |
ANT18 |
ANT30 |
Read/write distance |
100 mm |
15 mm |
24 mm |
|
antenna to transponder (Sg) max |
|
|
|
|
Enclosure dimensions in mm |
75 x 75 x 20 |
M18 x 1.0 x 55 |
M30 x 1.5 x 58 |
|
|
|
(L x W x H) |
(Ø x thread x L) |
(Ø x thread x L) |
Color |
|
Anthracite |
Pale turquoise |
|
Material |
|
Plastic PA 12 |
Plastic Crastin |
|
Plug connection |
4-pin (pins on antenna side) |
|
||
Antenna cable lengths |
3 m |
|
|
|
Degree of protection according to |
IP 67 |
IP 67 (at the front) |
|
|
EN 60529 |
|
|
|
|
Shock-resistant acc. to |
|
|
|
|
EN 60721-3-7, Class 7M2 |
50 g 1) |
|
|
|
Vibration-resistant to |
|
|
|
|
EN 60721-3-7, Class 7M2 |
20 g ( 3 to 500 Hz) 1) |
|
|
|
Attachment of the antenna |
2 x M5 screws |
2 plastic nuts M18 x |
2 plastic nuts M30 x |
|
|
|
|
1.0 |
1.5 |
Ambient temperature |
|
|
|
|
• During operation |
• -25 °C to +70 °C |
|
|
|
• During transport and storage |
• -40 °C to +85 °C |
|
|
|
MTBF (at +40 °C) |
2.5 x 105 hours |
|
|
|
Approx. weight |
80 g |
120 g |
150 g |
1) Warning: The values for shock and vibration are maximum values and must not be applied continuously.
5.5.10.6Ordering data for antennas
Product description |
Order No. |
MOBY E, ANT 1 |
6GT2398-1CB00 |
MOBY E, ANT 18 |
6GT2398-1CA00 |
MOBY E, ANT 30 |
6GT2398-1CD00 |
116 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.5 RF350R
5.5.10.7Dimension drawings for antennas
&DEOH OHQJWK P
0LQLPXP EHQGLQJ UDGLXV 20 mm
$17 FDQ EH FRQQHFWHG DW UHDGHU HQG
Figure 5-17 Dimension drawing for ANT 1
Dimensions in mm
&DEOH OHQJWK P
0LQLPXP EHQGLQJ
UDGLXV PP
$QWHQQD KHDG
$17 FDQ EH FRQQHFWHG DW UHDGHU HQG
$QWHQQD HQG
0 )LQHWKUHDGSLWFK |
02%< ( |
|
$17 |
6LGH YLHZ RI DQWHQQD KHDG
Figure 5-18 Dimension drawing for ANT 18
Dimensions in mm
$QWHQQD HQG
&DEOH OHQJWK P
0LQLPXP EHQGLQJ
UDGLXV PP
$QWHQQD KHDG
$17 FDQ EH FRQQHFWHG DW UHDGHU HQG
0 )LQHWKUHDGSLWFK
02%< (
$17
6LGH YLHZ RI DQWHQQD KHDG
Figure 5-19 Dimension drawing for ANT 30
Dimensions in mm
SIMATIC RF300 |
117 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.6 RF380R
5.6RF380R
5.6.1Features
RF380R reader |
Features |
|
|
Design |
RS232 or RS422 interface |
|
|
Status display |
|
Area of application |
Identification tasks on assembly lines in |
|
|
harsh industrial environments |
|
Read/write distance to |
Max. 125 mm |
|
transponder |
|
|
Data transmission rate |
• Read: approx. 3,100 byte/s |
|
|
• Write: approx. 3,100 byte/s |
5.6.2Pin assignment of RF380R RS232/RS422 interface
You can connect the RF380R reader to a higher-level system via the internal RS422 interface or via the RS232 interface. After connection, the interface module automatically detects which interface has been used.
Note correct assignment of the pins here:
|
Pin |
|
|
|
Pin |
|
Assignment |
|
|
|
|
|
|
Device end |
RS232 |
|
RS422 |
|
|
|
|
|
8-pin M12 |
|
|
|
|
|
|
|
|
1 |
+ 24 V |
|
+ 24 V |
|
|
|
|
|
||||
|
|
|
|
|
2 |
RXD |
|
- Transmit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
0 V |
|
0 V |
|
|
|
|
|
|
|||
|
|
|
|
|
4 |
TXD |
|
+ Transmit |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|||
|
|
|
|
|
5 |
NC |
|
+ Receive |
|
|
|
|
|
6 |
NC |
|
- Receive |
|
|
|
|
|
|
|||
|
|
|
|
|
7 |
not used |
|
not used |
|
|
|
|
|
|
|||
|
|
|
|
|
8 |
Earth (shield) |
|
Earth (shield) |
118 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.6 RF380R
5.6.3Display elements of the RF380R reader
Color |
|
Meaning |
Green |
Flashing |
Operating voltage present, reader not initialized or antenna switched off |
|
Permanently |
Operating voltage present, reader initialized and antenna switched on |
|
on |
|
Yellow1) |
|
Transponder present |
Flashing red |
|
Error has occurred, the type of flashing corresponds to the error code in |
|
|
the table in Section "Error codes". The optical error display is only reset |
|
|
if the corresponding reset parameter ("option_1", see FC45 / FB45 |
|
|
documentation, Section "Input parameters") is set. |
1)In the operating state "Without presence", the lighting duration may be very short.
5.6.4Ensuring reliable data exchange
The "center point" of the transponder must be situated within the transmission window.
5.6.5Metal-free area
The RF380R can be flush-mounted in metal. Please allow for a possible reduction in the field data values.
D
D
6,0$7,& 5) 5
D
D
Figure 5-20 Metal-free area for RF380R
To avoid any impact on the field data, the distance a should be ≥ 20 mm.
SIMATIC RF300 |
119 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.6 RF380R
5.6.6Minimum distance between RF380R readers
|
0LQLPXP GLVWDQFH EHWZHHQ 5) 5 DQG 5) 5 |
|
' PP |
' |
|
|
' |
Figure 5-21 Minimum distance between RF380R readers
120 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.6 RF380R
5.6.7Technical specifications of the RF380R reader
Table 5-7 |
Technical specifications of the RF380R reader |
|
|
|
|
Inductive interface to the transponder |
|
|
Transmission frequency for power/data |
13.56 MHz |
|
Antenna |
|
integrated |
Interface to communication module |
RS232 or RS422 (3964R protocol) |
|
Baud rate |
|
19200 baud, 57600 baud, 115200 baud |
Cable length between reader and communication |
RS422 data cable length: max. 1000 m |
|
module |
|
RS232 data cable length: Max. 30 m |
Read/write distances of reader |
See RF380R field data |
|
Minimum distance between two RF380R readers |
≥ 500 mm |
|
Maximum data transfer rate |
|
|
reader - transponder (tag) |
|
|
Reading |
|
Approx. 3100 byte/s |
Writing |
|
Approx. 3100 byte/s |
Functions |
|
Initialize/read/write transponder |
|
|
Scan status and diagnostics information |
|
|
Switch antenna on/off |
|
|
Repeat command |
|
|
Scan transponder serial numbers |
Power supply |
24 V DC |
|
Display elements |
2-color LED |
|
|
|
(operating voltage, presence, error) |
Plug connector |
M12 (8-pin) |
|
Enclosure |
|
|
Dimensions (in mm) |
160 x 80 x 40 (without M12 plug connector) |
|
Color |
|
Anthracite |
Material |
|
Plastic PA 12 |
Fixing |
|
4 x M5 screws |
Ambient temperature during operation |
-25 °C to +70 °C |
|
during transport and storage |
-40 °C to +85 °C |
|
Degree of protection to EN 60529 |
IP67 |
|
Shock to EN 60 721-3-7 Class 7 M2 |
50 g |
|
Vibration to EN 60 721-3-7 Class 7 M2 |
20 g |
|
Weight |
|
Approx. 600 g |
MTBF (Mean Time Between Failures) in years |
109 years |
|
Approvals |
|
Radio to R&TTE guidelines EN 300 330, |
|
|
EN 301489, CE, FCC, UL/CSA |
Current consumption |
Typ. 160 mA |
SIMATIC RF300 |
121 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.6 RF380R
5.6.8FCC information
Siemens SIMATIC RF380R
FCC ID: NXW-RF380R
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
5.6.9 |
RF380R ordering data |
|
|
|
|
|
|
|
|
Product description |
Order No. |
|
|
Reader RF380R |
6GT2801-3AA10 |
|
|
With RS422 interface (3964R) |
|
|
|
IP67; |
|
|
|
-25 °C to +70 °C, dimensions 160 x 96 x 40 (L x W x H in mm); |
|
|
|
with integrated antenna; |
|
|
|
max. limit distance 150 mm (depending on transponder) |
|
122 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.6 RF380R
5.6.10Dimension drawing
6,0$7,& 5) 5
Figure 5-22 Dimension drawing RF380R
Dimensions in mm
SIMATIC RF300 |
123 |
System Manual, 06/2008, A5E01642529-02 |
Readers
5.6 RF380R
124 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Transponders |
6 |
6.1Overview
Transponders consist predominantly of logic, FRAM and/or EEPROM.
If a transponder moves into the transmission window of the reader, the necessary power for all of the circuit components is generated and monitored by the power supply unit. The pulse-coded information is prepared in such a way that it can be processed further as pure digital signals. The handling of data, including check routines, is performed by the logic, which also manages the various memories.
SIMATIC RF300 |
125 |
System Manual, 06/2008, A5E01642529-02 |
Transponders
6.2 RF320T
6.2RF320T
6.2.1 |
Features |
|
|
|
|
|
|
|
|
|
|
Transponder RF320T |
Features |
|
|
|
|
Field of application |
Identification tasks on small assembly lines |
|
|
|
|
in harsh industrial environments |
|
|
|
Memory |
Read-only area (4 bytes UID) |
|
|
|
|
User data area (20 bytes) |
|
|
|
Read/write range |
See Section Field data for transponders, |
|
|
|
|
readers and antennas (Page 39) |
|
|
|
Mounting on metal |
Not possible Recommended distance from |
|
|
|
|
metal ≥ 20 mm |
126 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |
Transponders
6.2 RF320T
6.2.2Metal-free area
Mounting of RF320T on metal
Direct mounting of the RF320T on metal is not allowed.
The following figures show the minimum distance between the RF320T and metal:
'DWD PHPRU\
K ! PP
0HWDO
1RQ PHWDO
Figure 6-1 Mounting of an RF320T on metal with spacer
Flush-mounting of RF320T in metal
|
0HWDO |
'DWD PHPRU\ |
|
K ! PP
1RQ PHWDO
D ! PP
Figure 6-2 Flush-mounting of RF320T in metal with spacer
At lower values, the field data change significantly, resulting in a reduced range.
SIMATIC RF300 |
127 |
System Manual, 06/2008, A5E01642529-02 |
Transponders
6.2 RF320T
6.2.3Technical data
Table 6-1 |
Technical data for RF320T |
|
|
|
|
|
|
||
Memory size |
|
20 bytes EEPROM (r/w), 4 bytes UID (ro) |
||
Memory organization |
Byte-oriented access, write protection possible |
|||
|
|
|
in 4-byte blocks |
|
MTBF (Mean Time Between Failures) in years |
1871 |
|||
Read cycles |
|
Unlimited |
||
Write cycles, min. |
50 000 |
|||
at ≤ 40 °C, typical |
> 100 000 |
|||
Data retention time |
> 10 years (at < +40 °C) |
|||
Write/read distance |
dependent on the reader used |
|||
|
|
|
(see field data) |
|
Energy source |
Inductive power transmission |
|||
Shock/vibration-resistant to EN 60721-3-7, Class 7 |
100 g/20 g |
|||
M3 |
|
|
|
|
Torsion and bending load |
not permissible |
|||
Fixing |
|
Adhesive/M3 screws |
||
Recommended spacing from metal |
> 20 mm |
|||
Degree of protection to EN 60529 |
• |
IP67/IPX9K |
||
Housing |
|
Button |
||
• |
Dimensions |
• Ø 27 mm x 4 mm |
||
• |
Color/material |
• |
Black/epoxy resin |
|
Ambient temperature |
|
|
||
• |
Operation |
• -25 to +85 °C |
||
• |
Transport and storage |
• -40 to +125 °C |
||
Weight |
|
Approx. 5 g |
Note
All the technical data listed are typical data and are applicable for an ambient temperature of between 0 C and +50°C and a metal-free environment.
6.2.4 |
Ordering data |
|
|
|
|
|
|
|
|
Transponder RF320T |
Order No. |
|
|
Transponder RF320T, button, 20 byte EEPROM, |
6GT2800-1CA00 |
|
|
IP 67, -25 °C to +85 °C, d = 27 mm x 4 mm |
|
128 |
SIMATIC RF300 |
System Manual, 06/2008, A5E01642529-02 |