Configuration and Mounting Guidelines |
3 |
MOBY I Configuration, Installation and Service Manual |
3-1 |
(4) J31069-D0033-U001-A8-7618 |
Configuration and Mounting Guidelines
3.1Basic Requirements
!
FCC Compliance
Statement
Warning
Do not make changes to the devices.
Violation will invalidate interference emission certification (BZT, FCC), CE and the manufacturer’s warranty.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received, including interference that may cause undesired operation.
To choose the correct MOBY I components, apply the following criteria to your particular application.
STransmission distance (i.e., read/write distance)
SThe amount of data to be transferred
SMetal-free spaces for MDS and SLG
SStatic or dynamic transmission of the data
SSpeed for dynamic transmission
STolerances of the tracking
SEnvironmental conditions (e.g., moisture, temperature, chemical influences and so on)
3-2 |
MOBY I Configuration, Installation and Service Manual |
(4) J31069-D0033-U001-A8-7618 |