Siemens FS720, FC724 Series Manual

A6V10207176_h_en_-­2016-05-23

Building Technologies

Control Products and Systems

FC724

Cerberus™ PRO

Fire control panel

FS720 series, IP6

κ Compact, pre-assembled, microprocessor-controlled fire control panel with

integrated operating unit for up to 504 addresses

κ Fire control panel can be used as a standalone version or can be networked
κ Up to 64 stations – control panels and terminals – can be linked to form a

network

κ Integrated degraded mode function
κ Redundant network node, degraded mode operation according to EN 54
κ Fast Ethernet interface for a heterogeneous network
κ Integrated user-friendly operating unit
κ Can be extended by adding printer, key switches, LED indicators
κ Slots for RS232 and RS485 serial interfaces
κ Emergency power supply for emergency operating time of up to 72 hours
κ Detection and automatic reading in (auto-configuration) of all C-NET devices,

ready for operation immediately

κ Processes signals from Cerberus PRO FD720 detector series
κ Floor repeater displays, floor repeater operating units, and alarm devices on C-

NET detector line

κ Flexible configuration of complex applications and controls
κ Configuration data can be uploaded/downloaded via remote access
κ Firmware for all processor-controlled control pan el components can be

updated

2

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

System overview

FC10 or X C10

Fire detection or

Extinguishing

control unit

collective

4 (8) loops

max. 504 addresses

C-NET

stub li ne

FDCI222

4 inputs

4 outputs

24VDC ext.

possible

FDCL221

FDCIO222

FDM22x

FDM221

FDS221/

FDS229

DBS720

OH720

HI722

HI720

OP720

4 inputs

FDCIO221

1 input

1 output

1 input

FDCI221

OH720

24VDC ext.

2 in-/outputs

optionally

Detection line collective Siemens,

Synova SynoLINE300 or

SynoLINE600

TM

FDCIO223

C

onventional

horn line

via FCI2009-A1

Transmission of an

alarm signal
Transmission of a
fault signal

Fire control panel

Fire controls

FC724

Repeater

FN2002

Cluster

(C-WEB/SAFEDLINK)

Remote access

Engineerin g Tool,

Operating Tool

FC724

FT724

OP720

Mimic display

FT2001- A1

DBS721 / DBS729

FT2010/FT2011

Floor repeater terminal /
Floor repeater display

Explosion-

hazard area

FDOOT271

Radio detectors

FDM273

FDCW241

FDA221/

FDA241

FDM233-Ex

OOH740-A9-Ex

FDCI723

FDCL221-Ex

3

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Networking of several fire control panels

Up to 32 control panels and terminals can be linked to form a cluster (C­WEB/SAFEDLINK network). If the cluster is connected to a danger management
system via BACnet, up to 16 control panels and terminals can be networked.

Siemens Danger

Management System

DL3750+

Matrix printer

RS232

FC722

FT724/FC72x

Cluster

(C-WEB/SAFEDLINK)

16 stations

In-/

Outputs

Ethernet

FC724

Repeater

FN2002

4

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

An optical Ethernet network (C-WEB/LAN) allows up to 14 clusters with up to 16
stations to be operated on one network. A maximum of 64 stations is supported in total.

You will find details of system networking in product data sheet A6V10227649.

5

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Function features

κ The FC724 is a compact fire control panel with integrated operating unit for

processing signals from FD720 devices.

κ The control panel may be used as a standalone unit or networked.
κ The control panel and the fire detection system are custom-configured using

the Cerberus-Engineering-Tool software.

κ All detector lines are monitored for ground faults.
κ Customer texts can be adapted directly on the operating unit of the control

panel or with the Cerberus-Engineering-Tool software.

κ Up to 2000 events can be retrieved from the event memory based on various

criteria.

κ Automatic summer/winter time changeover
κ Siemens danger management system can be connected

Function elements

Operating unit

The following elements are available on the operating unit:

– CPU module and electronics
– Ethernet connection
– Slots for RS232 and RS485 modules and network modules (SAFEDLINK)
– Space for 'Kaba' or 'Nordic' key switch
– Space for event printer
– Peripheral data bus connection for optional LED modules

Periphery board

The following elements are available on the periphery board:

– Connection terminals for C-NET lines, remote transmission (alarm, fault), horn

output, configurable control inputs and outputs, monitored alarm and fault output,
emergency supply, power supply

– Two slots for loop extension (C-NET)

Power supply unit 150 W, emergency power supply

The power supply feeds the hardware and charges the batteries.
In the event of a power cut, the batteries provide emergency current.

Housing

A pivoting mounting plate can be fitted for the following elements above the periphery
board on the rear housing panel:

– 1x fire brigade periphery module (for Germany)
– 2x sounder modules (as an alternative to mounting on U-rail TS35)

Configuration

The FXS7212 Cerberus-Engineering-Tool allows the system to be customized.

6

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Application ranges

The FC724 is ideal for medium-sized applications, e.g. for use in industrial plants,
regional banks, or office complexes.
Thanks to the flexible networking options, the FC724 can also be used for large-scale
sites.

Operation

Each control unit has an integrated operating unit. The control panel can also be
operated via a separate FT724 fire terminal.
You will find details and more information in product data sheet A6V10207898.

7

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Overview of FC724 fire control panels

Housing (Comfort)

FC724-ZA FC724-ZE

Featuring 48 indicator

groups

with one red/green + one

yellow LED each

4 loops 4 loops

with power supply (150 W) with power supply (150 W)

Max. battery capacity 26AhMax. battery capacity 26

Ah

Extensions External printer

FH7202-Z3 FH7203-Z3 FTO2001-A1 DL3750+

Housing (Standard) Housing (Comfort) Event printer Matrix printer (external)

430 x 398 x 183 mm 430 x 796 x 183 mm RS232 interface

Empty housing for free use

For installation in all

control panels

RS232 module must RS232 module must

be ordered separately be ordered separately

Operating accessories

E.g., for extra batteries, FCM7213-Y3 FCM7214-Y3

Operating add-on, or 48 indicator groups with 96 indicator groups with

Event printer one red/green + one

yellow LED each

one red/green + one

yellow LED each

Space for batteries
2x FA2003-A1 (7 Ah) or
2x FA2004-A1 (12 Ah)

E.g., for extra batteries,

Operating add-on, or for retrofitting for retrofitting

Event printer

Space for batteries
2x FA2003-A1 (7 Ah) or
2x FA2004-A1 (12 Ah) or
2x FA2005-A1 (17 Ah) or
2x FA2006-A1 (26 Ah)

8

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Layout of FC724 inside housing (Comfort)

9

11245

9

3

10

16

141522

12

1

25

23

2

4

7

19

23

18

6

17

21

8

20

13

26

Basic equipment

Designation

Comment

1

Housing (Comfort) FH7203-Z3 Items 1-6: Basic equipment

2

Periphery board (2-loop) FCI2002-A1

3

Power supply (SV 24V-150 W) V24230-Z6-A5

4

Mains terminals on TS35 DIN rail – Space for socket, relay modules

5

Operating unit FCM72xx-xx Operating unit with CPU

6

Card cage (2 slots) FCA2008-A1 For two module bus cards

7

Space for batteries – 2x 12 V / 17…26 Ah

9

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Extensions

Designation

Comment

8

Relay module Z3B171 Relay for fire controls

9

Event printer FTO2001-A1 For logging events

10

Key switch (Kaba) FTO2005-C1 For operating access authorization
Key switch (Nordic) FTO2006-B1

11

Mounting plate FHA2007-A1 E.g., for fire brigade periphery module

12

Loop extension (C-NET) FCI2003-A1 For extending the number of loops from two to four,

the number of addresses remains the same

13

Module bus cards
Line card (FDnet/C-NET) FCL2001-A1 For four extra C-NET lines
Line card (SynoLOOP) FCL7201-Z3 For four extra SynoLOOP lines
I/O card (programmable) FCI2008-A1 For twelve configurable inputs/outputs
I/O card (horn/monitored) FCI2009-A1 For eight monitored horn outputs
I/O card (RT) FCI2007-A1 For extra alarm and fault outputs

14

RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485 interface

15

RS232 module (isolated) FCA2001-A1 For devices with an RS232 interface

16

Network module (SAFEDLINK) FN2001-A1 For networking several stations

17

Repeater (SAFEDLINK) FN2002-A1 For extending the C-WEB system bus, max. 1x

repeater (SAFEDLINK) between two stations
(mounted directly on a plane surface, on a TS35 U­rail, or in housing FDCH221)

18

Sounder module FCA2005-A1 For splitting one conventional sounder into four

19

Battery (12 V, 17 Ah, VDS) FA2005-A1 For the emergency power supply
Battery (12 V, 26 Ah, VDS) FA2006-A1

20

Fire brigade periphery module FCI2001-D1 for Germany (FBF, FSD, ÜE, FSE, ÖA, KL)

21

19" mounting kit FHA2016-A1 For installation in 19" third-party housing

22

License key Sx FCA20xx For special functions

23

Cable kit (communication) FCA2014-A1 For flexible connections running to the modules on

the operating unit

24

Power supply kit (150 W, B) FP2005-A1 For extra power supply

25

Relay module Z3B171 Space for U-rail TS35 L=70 mm for max. 4 relay

modules

26

FM blind 2HE FHA2015-A1 for recessed mounting of housings

10

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Technical data

Mains voltage AC 115/230 V +10/-15 %
Power supply 150 W
Operating voltage DC 21…28.4 V
Operating current Max. 5 A
Battery capacity 2x 12 V, 26 Ah
Battery monitoring Yes
Network monitoring Yes
Connectable detector series Cerberus PRO FD720 (C-NET)
Number of lines

– Loops (with loop extension) or
– Stubs

4 (8)

8 (16)
Number of addresses Max. 504
Integrated inputs/outputs

– Relay output

– RT alarm
– RT fault

– Monitored outputs

– Alarm
– Fault
– Horn

– Freely programmable inputs/outputs

1

1

1

1

2

12
Operating unit Integrated
Slots for RS232, RS485 serial ports 2
Slots for network modules 2
Slots for loop extension 2
Mounting spaces for cable kit (communication) 2
Sounder module Max. 2
Ethernet port RJ45 1
Operating temperature -8…+42 °C
Storage temperature -20…+60 °C
Air humidity (no condensation permitted) ≤95 % rel.
Dimensions (W x H x D)

– Without cover cap
– With cover cap

430 x 796 x 160 mm

430 x 796 x 183 mm
Color

– Housing
– Cover cap

~RAL 7035, light gray

~RAL 000 50 00
Protection category (IEC 60529) IP30
Approvals

– VdS
– LPCB
– FM
– DNV GL (Marine)

G209077

126bn/07

3051081

See document A6V10339425

11

Building Technologies
Fir e Safety

A6V10207176_h_en_--

2016-05-23

Details for ordering

Type Art. no. Designation Weight

Control panels FC724-ZA S54400-C30-A2 Fire control panel (4L) 18.280 kg

FC724-ZE S54400-C30-A3 Fire control panel (4L, 2LED) 19.200 kg

Extensions Z3B171 BPZ:4843830001 Relay module AC 250 V / 10 A (1 relay) 0.042 kg

FTO2001-A1 A5Q00010126 Event printer 0.250 kg
– A5Q00017619 Spare printer reels (10 reels) 0.090 kg
FTO2005-C1 A5Q00010113 Key switch (Kaba) 0.013 kg
FTO2006-B1 A5Q00010129 Key switch (nordic) 0.050 kg
FHA2007-A1 A5Q00010151 Mounting plate 0.800 kg
FCI2003-A1 A5Q00010136 Loop extension (FDnet/C-NET) 0.064 kg
FCA2002-A1 A5Q00009923 RS485 module (isolated) 0.067 kg
FCA2001-A1 A5Q00005327 RS232 module (isolated) 0.068 kg
FN2001-A1 A5Q00012851 Network module (SAFEDLINK) 0.077 kg
FN2002-A1 S24236-B2502-A1 Repeater (SAFEDLINK) 0.154 kg
FCA2005-A1 A5Q00014866 Sounder module 0.140 kg
FCA2014-A1 A5Q00023027 Cable kit (communication) 0.224 kg
FCI2001-D1 A5Q00013100 Fire brigade periphery module 0.482 kg
FH7202-Z3 S54400-B70-A101 Housing (Standard) 7.500 kg
FH7203-Z3 S54400-B71-A101 Housing (Comfort) 15.000 kg
FCM7213-Y3 S54400-B149-A1 Operating add-on (2xLED indicator) 2.600 kg
FCM7214-Y3 S54400-B150-A1 Operating add-on (4xLED indicator) 2.800 kg
FHA2016-A1 A5Q00020179 19" mounting kit 3.000 kg
FN2006-A1 S54400-A109-A1 Fiber network module (SM) 0.770 kg
FN2007-A1 S54400-A110-A2 Fiber network module (MM) 0.770 kg

Auxiliary power supply FP2003-A1 A5Q00016005 Power supply kit (70 W) 0.650 kg

FP2004-A1 A5Q00020825 Power supply kit (150 W, A) for installation

into empty housing

1.366 kg

FP2005-A1 A5Q00018779 Power supply kit (150 W, B) for parallel

connection

1.100 kg

Networks (backbone) FN2012-A1 S54400-B152-A Ethernet switch (modular) 0.560 kg

FCA2031 S54400-A153-A1 Connection module (MoNet) 0.020 kg

+ 0.050 kg

for cable
VN2002-A1 S54400-A43-A1 Ethernet module (MM) 0.030 kg
VN2003-A1 S54400-A44-A1 Ethernet module (SM) 0.030 kg
FHA2029-A1 S54400-B79-A1 Installation kit (switch, comf.) 1.240 kg

Batteries FA2003-A1 A5Q00019353 Battery (12 V, 7 Ah, VDS) 2.450 kg

FA2004-A1 A5Q00019354 Battery (12 V, 12 Ah, VDS) 3.930 kg
FA2005-A1 A5Q00019677 Battery (12 V, 17 Ah, VDS) 5.640 kg
FA2006-A1 A5Q00019356 Battery (12 V, 26 Ah, VDS) 7.572 kg

Software license FCA2033-A1 S54400-P154-A1 License key (S1) 0.010 kg

FCA2034-A1 S54400-P155-A1 License key (S2) 0.010 kg
FCA2035-A1 S54400-P156-A1 License key (S3) 0.010 kg

External printer DL3750+ A5Q00023962 Matrix printer (external) 7.300 kg

– A5Q00023963 Color ribbon for matrix printer DL3750+ 0.078 kg

Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies

© Siemens Switzerland Ltd, 2008

Technical specifications and availability subject to change without notice.

Docum ent no. A6V1020 7176 _h _en_-- FS720 manual
Edition 2016-05-23