Sharp XL-MP100H User Manual

If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or [phone]
if telephoning from Ireland).

0301

MODEL

AM loop aerial

Right speaker

FM aerial

Left speaker

Wall socket
(AC 230 - 240 V, 50 Hz)

Black

Red

Right speaker

Left speaker

XL-MP100H

MICRO COMPONENT SYSTEM

This Quick Start Guide will help you to correctly install and oper­ate your system.

2

Remote control battery installation

1

Accessories

AC power lead × 1

FM aerial × 1 Speaker wire × 2

3

System connections

Remote control × 1 AM loop aerial × 1

Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.

1 Remove the battery cover.

2 Insert the batteries as shown.

3 Replace the cover.

4

Turning on your system

Press the ON/STAND-BY button to turn the power
on.

XL-MP100HE_QG.pm 04.1.28, 5:27 PM1

TINSZA009SJZZ
04A N HK 1

Listening to a CD or MP3 disc

Listening to a cassette tape

1 Press the FUNCTION button until “CD” appears on the dis-

play.

2 Press the OPEN/CLOSE button to open the disc tray.
3 Place the disc on the disc tray, label side up.

12 cm (5") 8 cm (3")

4 Press the OPEN/CLOSE button to close the disc tray.
5 Press the button to start playback from track 1.

Listening to the radio

1 Press the FUNCTION button until “TAPE” appears on the

display.

2 Open the cassette compartment by pushing the area marked

“PUSH EJECT

”.

3 Load a cassette into the cassette com-

partment with the side to be played
facing toward you.

4 Close the cassette compartment by pushing the area marked

“PUSH EJECT ”.

5 Press the button to start playback.

■

If trouble occurs

When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.

If such a problem occurs, do the following:

1. Set the unit to the stand-by mode and turn the power on
again.

2. If the unit is not restored in the previous operation, un­plug and plug in the unit, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory
by resetting it.

1 Press the FUNCTION button until “FM” or “AM” appears on

the display.

2 Press the TUNING ( or ) button to tune in to the desired

station.
When the TUNING button is pressed for more than 0.5 sec­onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.

To receive an FM stereo transmission:

Press the FUNCTION button to display the “ST” indicator.

” will appear when an FM broadcast is in stereo.

● “

FM stereo mode indicator

FM stereo receiving indicator

XL-MP100HE_QG.pm 04.2.13, 11:48 AM2

■

Clearing all the memory (reset)

1. Press the ON/STAND-BY button to enter the power stand­by mode.

2. Whilst pressing down the MEMORY/SET button and the
TAPE
“CLEAR” appears.

Caution:

This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.

■

Maintenance

Routine maintenance is required for continued optimum perfor­mance, refer to the operation manual (page 34).

button, press the ON/STAND-BY button until

TINSZA009SJZZ