Sharp XL-DAB151S, XL-DAB151PH, XL-DAB151BK User Manual
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries. iPad is a trademark
of Apple Inc.
CD/USB
RDS
DAB
HI FI COMPONENT SYSTEM
MODEL
XL-DAB151PH(S)
XL-DAB151PH(BK)
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
● XL-DAB151PH(S) Hi Fi Component System consisting of XL-DAB151PH(S) (main unit) and CP-HF151H (speaker
system).
● XL-DAB151PH(BK) Hi Fi Component System consisting of XL-DAB151PH(BK) (main unit) and CP-HF151H (speaker
system).
Special Notes
WARNINGS
● When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the
timer mode or remote control.
● This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
● To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the
apparatus.
● Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying
or broadcasting such material without permission of the
relevant licensees or owners of the copyright is prohibited
by law. SHARP is not in a position to authorise the copying
or broadcasting of copyright materials and nothing in this
OPERATION MANUAL should be implied as giving that
authority.
Laser Diode Properties
Material: AIGaAs
Wavelength: 790 nm
Emission Duration: continuous
Laser Output: max. 0.7 mW
For other countries:
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Please refer to the relevant laws in
your country.
NOTE
● Recording and playback of any material may require
consent, which SHARP is unable to give. Please refer
particularly to the provisions of the Copyright Act 1956,
the Dramatic and Musical Performers Protection Act
1958, the Performers Protection Acts 1963 and 1972
and to any subsequent statutory enactments and
orders.
CAUTION
● This product is classified as a CLASS 1 LASER product.
● Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
As the laser beam used in this compact disc player is
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personnel only.
“Made for iPod,” “Made for iPhone,” and “Made for iPad”
mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad,
respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not
responsible for the operation of this device or its
compliance with safety and regulatory standards. Please
note that the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
2
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
The following accessories are included.
Adaptors for iPhone x 3 Remote control x 1 “AA” size battery
DAB/FM aerial x 1 AC power lead x 1 Stand for iPad x 1
(UM/SUM-3, R6, HP-7 or similar) x 1
CONTENTS
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
USB
Listening to USB mass storage
device/MP3 player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . 16
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the clock (Remote control only) . . . . . . . . . . . 8 - 9
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . 16 - 17
Using the Radio Data System (RDS) . . . . . . . . . 17 - 19
Listening to the DAB+ . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing the information display . . . . . . . . . . . . . . . . 21
Advanced Features
iPod, iPhone and iPad
Listening to the iPod, iPhone or iPad. . . . . . . . . . . . 9 - 11
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 22 - 23
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 24
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . 11 - 12
Advanced CD or MP3/WMA disc playback . . . . . . 12 - 13
MP3/WMA folder mode (only for MP3/WMA files) . . . . . 14
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . 24 - 25
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Page
3
Precautions
10 cm (4") 10 cm (4")
10 cm (4")
10 cm (4")
■ General
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
● Use the unit on a firm, level surface free from vibration.
● Place the speakers at least 30 cm (12") away from any
CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for safety.
Controls and indicators
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental aspects
of battery disposal.
● This unit should only be used within the range of
5°C - 35°C (41°F - 95°F).
Warn ing:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
■ Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
1
2 3
6
7
9
8 10 11 12 13 14 15
■ Front panel
1. Remote sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2. Timer indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .22
3. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
4. Docking Station for iPod or iPhone . . . . . . . . . . .10
5. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6. On/Stand-by Button . . . . . . . . . . . . . . .8, 10, 11, 16
7. FUNCTION Button. . . . . . . . . . . . . .8, 10, 11, 15, 15
8. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
9. Audio In Socket. . . . . . . . . . . . . . . . . . . . . . . . . . .24
Page
5
4
Page
10. Headphone Socket. . . . . . . . . . . . . . . . . . . . . . . . 24
11. Tuner Preset Down, CD/USB Track Down,
iPod/iPhone Skip Down . . . . . . . . . . . . . . . . . 11, 12
12. Tuner Preset Up, CD/USB Track Up,
iPod/iPhone Skip Up . . . . . . . . . . . . . . . . . . . 11, 12
13. Disc/USB Stop Button . . . . . . . . . . . . . . . . . . . . . 12
14. Disc/USB/iPod/iPhone Play or
Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . 11
4
Controls and indicators (continued)
CD/USB
RDS
DAB
2
1
3
5
4
6
7
8
9
10
11
13
12
14
15
16
19
20
21
22
23
24
25
26
18
27
29
37
36
39
38
17
35
33
32
31
30
34
28
+
1 5 6 7 8 91011
12 14
13 15
28272624 2523221918 2120
16
17
2 43
■ Speaker system
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
■ Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragms when
you remove the speaker grilles.
1
2
■ Remote control
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . 7
2. On/Stand-by Button. . . . . . . . . . . . . . . . . . . 8, 10, 11, 22
3. Numeric Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. Tuning Down, Skip Down, Fast Reverse,
Time Down Button . . . . . . . . . . . . . . . . . 8, 11, 14, 16, 22
7. Tuner Preset Up Button,
iPod Cursor Up. . . . . . . . . . . . . . . . . . . . . . . . . 10, 15, 16
8. Volume Down Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
10. Tuner Preset Down Button,
iPod Cursor Down . . . . . . . . . . . . . . . . . . . . . . 10, 15, 16
11. CD Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12. USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13. iPod Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
14. iPod Display (TV OUT) Button . . . . . . . . . . . . . . . . . . 10
15. CD/USB Display Button. . . . . . . . . . . . . . . . . . . . . 14, 15
16. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
17. DAB SCAN Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
18. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 16
20. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
21. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 8, 22
22. Sleep Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
23. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
24. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
25. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
26. Tuning Up, Skip Up, Fast Forward,
Time Up Button . . . . . . . . . . . . . . . . . . . 8, 11, 14, 16, 22
27. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
28. Enter Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 15, 22
29. Demo/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . 6, 8
30. Audio/Line (INPUT) Button . . . . . . . . . . . . . . . . . . .7, 24
31. Tuner/DAB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
32. iPod Play/Pause Button. . . . . . . . . . . . . . . . . . . . . . . . 10
33. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
34. CD/USB Play/Pause Button. . . . . . . . . . . . . . .11, 12, 15
35. CD/USB Stop Button . . . . . . . . . . . . . . . . . . .11, 12, 15
36. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . 17
37. RDS PTY Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
38. DAB Display Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
39. DAB Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Page
■ Display
1. USB Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
2. iPod Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
4. DAB+ Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
5. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
7. RDM (Random) Indicator. . . . . . . . . . . . . . . . . . . . . . .13
8. MEM (Memory) Indicator. . . . . . . . . . . . . . . . . . . . . . . 13
9. Repeat Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
10. Play/Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3
4
11. Tuning FM Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12. FM Stereo Mode Indicator. . . . . . . . . . . . . . . . . . . . . . 16
13. Stereo Station Indicator . . . . . . . . . . . . . . . . . . . . . . . 16
14. RDS Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15. PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16. Muting Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
17. X-bass Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
18. Title Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19. Artist Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
20. Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
21. Album Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
22. File Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
23. Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
24. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 22
25. Once Timer Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . 22
26. Disc Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
27. Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
28. Sleep Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Page
5
System connections
Right
speaker
DAB/FM aerial
To video input socket
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Video cable
(not supplied)
RED
BLACK
Left
speaker
TV
Label is located at the
bottom of the unit.
Make sure to unplug the AC power lead before making any connections.
MODEL NO.
HI FI COMPONENT SYSTEM
AC 220 - 240V 50/60Hz 45W
FREQUENCY RANGE : FM 87.5 - 108 MHz
DAB 174.928 - 239.200 MHz
SERIAL NO.
XL-DAB151PH(S)
MADE IN CHINA
92Lxxxxxxxxxxx
■ Aerial connection
Supplied DAB/FM aerial:
Connect the DAB/FM aerial wire to the DAB/FM terminal
and position the DAB/FM aerial wire in the direction where
the strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
■ Speaker connection
● Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
● Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can damage
the unit.
● Do not mistake the right and the
left channels. The right speaker is
the one on the right side when you
face the unit.
● Do not let the bare speaker wires touch each other.
● Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
● Do not stand or sit on the speakers. You may be
injured.
Incorrect
■ Demonstration mode
● The first time the unit is plugged in, the unit will enter
the demonstration mode.
● To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power standby mode. The unit will enter the low power consumption
mode.
● If iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed. Demonstration mode
is invalid during charge mode.
● To return to the demonstration mode, press the DEMO/
DIMMER button again.
■ Connecting iPod or iPhone to TV
Photo and video files from iPod or iPhone can be viewed
by connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO
OUT socket at the back of the unit and set the TV Out on
the iPod or iPhone unit to “ON” position.
Note:
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple’s homepage for
further information.
6
System connections (continued)
Audio signal
TV
To audio
output sockets
Audio cable
(commercially
available)
Main unit
To L I N E
input
sockets
0.2 m - 6 m
(8" - 20' )
Remote sensor
Remote control
■ AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
■ Line input connection (TV, etc.)
Connect to the TV using an audio cable
To select Line In function:
●
On main unit: Press FUNCTION button repeatedly until
●
On remote control: Press AUDIO/LINE (INPUT) button
Line In is displayed.
repeatedly until Line In is displayed.
.
■ Battery installation
Open the battery cover.
1
Insert the supplied battery according to the direction
2
indicated in the battery compartment.
When inserting or removing the battery, push it towards the
(–) battery terminals.
Close the cover.
3
Caution:
●
Remove the battery if the unit will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
●
Do not use rechargeable battery (nickel-cadmium battery,
etc.).
●
Installing the battery incorrectly may cause the unit to
malfunction.
●
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Notes concerning use:
●
Replace the battery if the operating distance is reduced or
if the operation becomes erratic. Purchase a “AA” size
battery (UM/SUM-3, R6, HP-7 or similar).
●
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
●
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
●
Keep the remote control away from moisture, heat, shock,
and vibrations.
■ Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the
unit. The remote control can be used within the range shown
below:
CD/USB
RDS
DAB
7
General control
CD/USB
RDS
DAB
Dimmer 1
Dimmer 2
Dimmer off
(Display is dim).
(Display gets dimmer).
(Display is bright).
- 5 ↔ - 4
........
↔ + 4 ↔ + 5
- 5 ↔ - 4
........
↔ + 4 ↔ + 5
FM STEREO
FM MONO
USB
iPod
Audio In
Line In
CD
DAB
CD/USB
RDS
DAB
■ To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
■ Display brightness control
To dim the display brightness, press the DEMO/DIMMER button on
the remote control.
■ Bass control
1
Press the BASS/TREBLE button to select “Bass”.
2
Within 5 seconds, press the VOLUME (+ or –) button to adjust the
bass.
■ Treble control
1
Press the BASS/TREBLE button to select “Treble”.
2
Within 5 seconds, press the VOLUME (+ or –) button to adjust the
treble.
■ Function
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
■ Volume auto set-in
If you turn off and on the main unit with the volume set to 17 or higher,
the volume starts at 16.
■ Volume control
Turn the volume knob towards VOLUME +/– (on main unit) or press
VOL +/– (on remote control) to increase or decrease the volume.
■ Auto power on function
When you press any of the following buttons, the unit turns on.
●
iPod, CD, USB, AUDIO / LINE (INPUT), TUNER/DAB on the
remote control: Selected function is activated.
●
/ button on the main unit: The unit turns on and playback of
the last function will start (CD, TUNER/DAB, USB, iPod, AUDIO
IN, LINE IN)
■ Auto power off function
The main unit will enter the stand-by mode (when iPod or iPhone is
not docked) after 15 minutes of inactivity during:
iPod: No connection.
AUDIO IN / LINE IN: No detection of input signal or very low sound
CD / USB: In the stop mode.
audibility.
Note:
However, if iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed during standby mode.
■ Muting
The volume is muted temporarily when pressing the MUTE button on
the remote control. Press again to restore the volume.
■ X-Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and “X-BASS” will
appear. To cancel the extra bass mode, press the X-BASS button on
the remote control.
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
Setting the clock (
Remote
control only)
In this example, the clock is set for the 24-hour (00:00) display.
Press the ON/STAND-BY button to turn the power on.
1
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the ENTER button. To adjust the day,
press the or button and then press the ENTER
button.
4
Press the or button to select 24-hour or 12-hour
display and then press the ENTER button.
The 24-hour display will appear.
(00:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
8
Setting the clock (Remote control
iPad
Connector
iPad
Stand for
iPad
only) (continued)
5 To adjust the hour, press the
and then press the ENTER button. Press the
button once to advance the time by 1 hour. Hold
it down to advance continuously.
6 To adjust the minutes, press the
and then press the ENTER button. Press the
button once to advance the time by 1 minute.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in again
or after a power failure, reset the clock (pages 8 - 9).
To readjust the clock:
Perform “Setting the clock” from step 2.
To change the 24-hour or 12-hour display:
Perform “Setting the clock” from step 2 onwards.
or
or
Listening to the iPod, iPhone or iPad
Made for:
●
iPod touch (4th generation)
●
iPod touch (3rd generation)
●
iPod touch (2nd generation)
●
iPod touch (1st generation)
●
iPod classic
●
iPod nano (6th generation)
●
iPod nano (5th generation)
●
iPod nano (4th generation)
●
iPod nano (3rd generation)
●
iPod nano (2nd generation)
●
iPhone 4
●
iPhone 3GS
●
iPhone 3G
●
iPhone
●
iPad
Caution:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s
homepage to download the latest version for your iPod,
iPhone and iPad.
Notes:
●
Charging terminal for iPod, iPhone and iPad:
Condition DOCK USB
USB function NO YES
Other function YES NO
Stand-by YES NO
●
The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
●
This product is made for iPhone. To prevent random
interference when iPhone is docked, the headphone
output is disabled, and “HP INVALID” will be
displayed. You may also experience brief audio
interference during incoming calls.
button
or
button
or
■ iPod, iPhone and iPad connection (USB only)
Insert the connector to the iPod, iPhone or iPad.
1
2 Place the iPad to the stand for iPad.
3 Connect the iPod, iPhone or iPad to the unit via USB
connector.
USB
Note:
USB terminal do not support VIDEO out.
■ iPod, iPhone or iPad playback
1 Press the ON/STAND-BY button to turn the power on.
2
Press the USB button on the remote control or FUNCTION button
repeatedly on the main unit to select USB function.
3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” will
appear.
4 Press
the /
Note:
Stop button
(CD/USB
( ) is invalid during iPod, iPhone or iPad playback.
/ ) button to start playback.
■ iPod and iPhone connection (Dock only)
Note:
Docking station is not recommended for iPad connection.
Adaptor for iPod and iPhone connection
Notes:
●
Please use the adaptor supplied with your iPod or iPhone unit.
●
You can use an audio cable to connect your iPod to the AUDIO
IN socket if:
1. your iPod adaptor does not fit into the iPod dock on the
main unit.
2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
9
Loading...