Sharp XG-PH50X, XG-PH50X-NL Setup Guide

MULTIMEDIA PROJECTOR

MODEL

XG-PH50X
XG-PH50X-NL

SETUP GUIDE

Setting up the Screen.......................................... 2

Screen Size and Projection Distance ................ 3

Connecting Pin Assignments .......................... 10

RS-232C Specifications and Commands ........ 12

Setting up the Projector Network Environment

1. Connecting the Projector to a Computer.......... 18

2. Setting an IP Address for the Computer .......... 19

3.

Setting up a Network Connection for the Projector

Controlling the Projector via LAN.................... 23

Controlling the Projector Using Internet Explorer

(Version 5.0 or later)................................... 23

Confirming the Projector Status (Status) ............. 24

Controlling the Projector (Control) ....................... 24

Setting and Adjusting the Projector

(Settings & Adjustments)............................ 25

Setting the Security (Network – Security) ............ 25

Making General Settings for the Network

(Network – General) ................................... 26

Setting for Sending E-mail when an Error Occurs

(Mail – Originator Settings) ........................ 26

Setting Error Items and Destination Addresses

to which E-mail is to be Sent when an

Error Occurs (Mail – Recipient Settings) ... 27

Setting the Projector Using RS-232C or Telnet

When Connecting Using RS-232C....................... 28

When Connecting Using Telnet ............................ 29

SETUP MENU (Main Menu) ................................. 30

ADVANCED SETUP MENU ................................. 30

Controlling the Projector Using RS-232C or Telnet

View Setting Detail List ([V]View All Setting) ....... 31

Set Items ............................................................... 31

Save Settings and Quit ([S]Save & Quit) ............. 32

Quit without Saving Settings ([Q]Quit Unchanged)

IP Address Setting ([1]IP Address) ...................... 33

Subnet Mask Setting ([2]Subnet Mask) ............... 33

Default Gateway Setting ([3]Default Gateway) .... 33

... 17

... 21

... 28

... 31

... 32

User Name Setting ([4]User Name) ..................... 34

Password Setting ([5]Password) .......................... 34

RS-232C Baud Rate Setting

([6]RS-232C Baud Rate) ............................ 34

Projector Name Setting ([7]Projector Name) ....... 34

Disconnecting All Connections

([D]Disconnect All) ..................................... 35

Entering ADVANCED SETUP MENU

([A]Advanced Setup) .................................. 35

Setting Auto Logout Time

(ADVANCED[1]Auto Logout Time) ............. 35

Data Port Setting (ADVANCED[2]Data Port) ....... 35

Carrying out Network Ping Test

(ADVANCED[5]Network Ping Test) ............ 36

Setting of Accept IP Address (ADVANCED[6]Accept

IP Addr(1) – [8]Accept IP Addr(3)) ............. 36

Accepting All IP Addresses

(ADVANCED[9]Accept All IP Addr) ............ 36

Setting of Search Port

(ADVANCED[0]Search Port) ...................... 37

Return to Default Settings

(ADVANCED[!]Restore Default Setting)..... 37

Return to Main Menu

(ADVANCED[Q]Return to Main Menu)....... 37

Stack Projection ................................................. 38

Setting up the Stack Projection ............................ 39

Video Wall Projection ........................................ 41

Setting up the Video Wall Projection Basic ......... 42

Adjusting the Position Horizontally and Vertically

Returning to the Default Video Wall Setup........... 44

Assigning the Projected Image on the

Video Wall Setup ........................................ 44

Notes on the Wide Video Wall Projection............. 45

Setting up the Video Wall Projection Application

Troubleshooting................................................. 50

Dimensions ........................................................ 53

... 44

.. 46

Setting up the Screen

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.

Note

• The projector lens should be centered in the middle of the screen. If the horizontal line passing through the
lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly
on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.

Standard Setup (Front Projection)

■ Place the projector at the required distance from

the screen according to the desired picture size.

Example of standard setup

Screen size : 100 inch (254 cm) STRETCH Mode : 16:9 (When the standard zoom lens attached)

Side View

Screen

"

64

/

33

(–62.3 cm)

H1 : –24

H2

11

8

/64" (20.8 cm)

Top View

Screen

"

16

/

5

(33.2 cm)

W : 13

Center of screen

Lens center

Lower lens shift
position
(High mount setup)

Lens center

Upper lens shift
position
(Desktop setup)

Lens center

Leftmost lens shift
position

Lens center

• The distance from the screen

to the projector may vary
depending on the size of the
screen.

•

The default setting can be used,
when placing the projector in front
of the screen. If the projected im­age is reversed, readjust the set­ting to “Front” in the “PRJ Mode”
menu. (See page

84 of the

projector’s operation manual.)

• Place the projector so that an

imaginary horizontal line that
passes through the center of the
lens is perpendicular to the
screen.

-2

Rightmost lens shift
position

Screen Size and Projection Distance

The projection screen size varies according to the distance from the lens of the projector to the screen.
The optional lenses from Sharp are also available for specialized application. Please see your nearest Sharp
Authorized Projector Dealer to details on all the lenses. (Refer to the lens operation manual when using a
lens.) Also, ensure to have service personnel install the optional lenses.
Install the projector so that projected images are projected onto the screen at the optimum size by referring
to the table. Use the values in the table as a reference when installing the projector.

Throw Distance

The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.

Screen

Fixed wide lens (AN-PH10EX)

5' 4" (1.6 m)

Throw distance ratio 1:0.8

Wide-zoom lens (AN-PH20EZ)

10' – 12' (3.0 m – 3.7 m)

Throw distance ratio 1:1.5–1.8

Standard zoom lens (AN-PH30EZ : Standard equipment with XG-PH50X)

12' – 14' 8" (3.7 m – 4.5 m)

Throw distance ratio 1:1.8–2.2

Tele-zoom lens (AN-PH40EZ)

15' – 20' (4.6 m – 6.1 m)

Throw distance ratio 1:2.25–3.00

Tele-zoom lens (AN-PH50EZ)

20' – 30' (6.1 m – 9.1 m)

Throw distance ratio 1:3.0–4.5

Tele-zoom lens (AN-PH60EZ)

30' – 46' 8" (9.1 m – 14.2 m)

Throw distance ratio 1:4.5–7.0

5101520253035 455040 (ft)

-3

Screen Size and Projection Distance

Standard Zoom Lens (AN-PH30EZ : Standard equipment with XG-PH50X)

F1.8-F2.0, f=25.6-31.3 mm

NORMAL Mode (4:3)

Picture (Screen) size Projection distance [L]

Distance from the lens center to

the bottom of the image [H]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
300" (762 cm) 610 cm (240”) 457 cm (180") 11.0 m (36' 0") 13.4 m (44' 0")
250" (635 cm) 508 cm (200") 381 cm (150") 9.1 m (30' 0") 11.2 m (36' 8")

200" (508 cm) 406 cm (160") 305 cm (120") 7.3 m (24' 0") 8.9 m (29' 4")
150" (381 cm) 305 cm (120") 229 cm (90") 5.5 m (18' 0") 6.7 m (22' 0")
100" (254 cm) 203 cm (80") 152 cm (60") 3.7 m (12' 0") 4.5 m (14' 8")

84" (213 cm) 171 cm (67") 128 cm (50") 3.1 m (10' 1") 3.8 m (12' 4")

80" (203 cm) 163 cm (64") 122 cm (48") 2.9 m (9' 7") 3.6 m (11' 9")
72" (183 cm) 146 cm (58") 110 cm (43") 2.6 m (8' 8") 3.2 m (10' 7")
70" (178 cm) 142 cm (56") 107 cm (42") 2.6 m (8' 5") 3.1 m (10' 3")
60" (152 cm) 122 cm (48") 91 cm (36") 2.2 m (7' 2") 2.7 m (8'10")

40" (102 cm) 81 cm (32") 61 cm (24") 1.5 m (4'10") 1.8 m (5' 10")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

–228.6 cm (–90") 0 cm (0") ±91.4 cm (36")
–190.5 cm (–75") 0 cm (0") ±76.2 cm (30")

–152.4 cm (–60") 0 cm (0") ±61.0 cm (24")
–114.3 cm (–45") 0 cm (0") ±45.7 cm (18")

–76.2 cm (–30") 0 cm (0") ±30.5 cm (12")
–64.0 cm (–2513/64") 0 cm (0") ±25.6 cm (105/64")

–61.0 cm (–24") 0 cm (0") ±24.4 cm (919/32")
–54.9 cm (–2119/32") 0 cm (0") ±21.9 cm (841/64")
–53.3 cm (–21") 0 cm (0") ±21.3 cm (813/32")
–45.7 cm (–18") 0 cm (0") ±18.3 cm (713/64")

–30.5 cm (–12") 0 cm (0") ±12.2 cm (451/64")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.03658
L2 (m) = 0.0447
H1 (cm) = –0.762
W (cm) = ±0.3048

[Feet/inches]

L1 (ft) = 0.03658
L2 (ft) = 0.0447
H1 (in) = –0.762
W (in) = ±0.3048

χ

χ

χ

χ

χ

/ 0.3048

χ

/ 0.3048

χ

/ 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

STRETCH Mode (16:9)

Picture (Screen) size Projection distance [L]

Distance from the lens center to

the bottom of the image [H]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
225" (572 cm) 498 cm (196") 280 cm (110") 9.0 m (29' 5") 11.0 m (35' 11")
200" (508 cm) 443 cm (174") 249 cm (98") 8.0 m (26' 2") 9.7 m (31' 11")

150" (381 cm) 332 cm (131") 187 cm (74") 6.0 m (19' 7") 7.3 m (24' 0")
133" (338 cm) 294 cm (116") 166 cm (65") 5.3 m (17' 5") 6.5 m (21' 3")
106" (269 cm) 235 cm (92") 132 cm (52") 4.2 m (13'10") 5.2 m (16' 11")
100" (254 cm) 221 cm (87") 125 cm (49") 4.0 m (13' 1") 4.9 m (16' 0")

92" (234 cm) 204 cm (80") 115 cm (45") 3.7 m (12' 0") 4.5 m (14' 8")
84" (213 cm) 186 cm (73") 105 cm (41") 3.3 m (11' 0") 4.1 m (13' 5")
72" (183 cm) 159 cm (63") 90 cm (35") 2.9 m (9' 5") 3.5 m (11' 6")
60" (152 cm) 133 cm (52") 75 cm (29") 2.4 m (7'10") 2.9 m (9' 7")

40" (102 cm) 89 cm (35") 50 cm (20") 1.6 m (5' 3") 1.9 m (6' 5")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

–140.1 cm (–555/32") 46.7 cm (1825/64") ±74.7 cm (2927/64")
–124.5 cm (–491/32") 41.5 cm (1611/32") ±66.4 cm (269/64")

–93.4 cm (–3649/64") 31.1 cm (121/4") ±49.8 cm (1939/64")
–82.8 cm (–3239/64") 27.6 cm (107/8") ±44.2 cm (1725/64")
–66.0 cm (–2563/64") 22.0 cm (821/32") ±35.2 cm (1355/64")
–62.3 cm (–2433/64") 20.8 cm (811/64") ±33.2 cm (135/64")

–57.3 cm (–2235/64") 19.1 cm (733/64") ±30.6 cm (121/32")
–52.3 cm (–2019/32") 17.4 cm (655/64") ±27.9 cm (1063/64")
–44.8 cm (–1721/32") 14.9 cm (557/64") ±23.9 cm (913/32")
–37.4 cm (–1445/64") 12.5 cm (429/32") ±19.9 cm (727/32")

–24.9 cm (–913/16") 8.3 cm (317/64") ±13.3 cm (515/64")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.03985
L2 (m) = 0.0487
H1 (cm) = –0.62263
H2 (cm) = 0.20754
W (cm) = ±0.33207

[Feet/inches]

L1 (ft) = 0.03985
L2 (ft) = 0.0487
H1 (in) = –0.62263
H2 (in) = 0.20754
W (in) = ±0.33207

χ

χ

χ

χ

χ

χ

/ 0.3048

χ

/ 0.3048

χ

/ 2.54

χ

/ 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

Note

• There may be an error of ± 3% in the above values.

• Values with a minus (–) sign indicate the distance from the lens center below the bottom of the image.

-4

Screen Size and Projection Distance

Fixed Wide Lens (AN-PH10EX)

F2.5, f=11.6 mm

NORMAL Mode (4:3)

Picture (Screen) size

Projection distance

Distance from the lens center to

the bottom of the image [H]

Diag. [χ] Width Height [L] Lower [H1] Upper [H2]
150'' (381 cm) 305 cm (120'') 229 cm (90'') 2.4 m (8' 0") –114.3 cm (–45") –73.2 cm (–2851/64") ±33.5 cm (1313/64")
100'' (254 cm) 203 cm (80'') 152 cm (60'') 1.6 m (5' 4") –76.2 cm (–30") –48.8 cm (–1913/64") ±22.4 cm (851/64")

84'' (213 cm) 171 cm (67'') 128 cm (50'') 1.4 m (4' 6") –64.0 cm (–2513/64") –41.0 cm (–161/8") ±18.8 cm (725/64")

80'' (203 cm) 163 cm (64'') 122 cm (48'') 1.3 m (4' 3") –61.0 cm (–24") –39.0 cm (–15

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

The formula for picture size and projection distance

[m/cm]

L (m) = 0.01626
H1 (cm) = –0.762
H2 (cm) = –0.48768
W (cm) = ±0.22352

[Feet/inches]

L (ft) = 0.01626
H1 (in) =
H2 (in) =
W (in) = ±0.22352

χ

χ

χ

χ

χ

/ 0.3048

–

0.762χ / 2.54

–

0.48768χ / 2.54

χ

/ 2.54

STRETCH Mode (16:9)

Picture (Screen) size

Projection distance

Diag. [χ] Width Height [L] Lower [H1] Upper [H2]
133'' (338 cm) 294 cm (116'') 166 cm (65'') 2.4 m (7' 9") –82.8 cm (–3239/64") –43.1 cm (–1661/64") ±32.4 cm (123/4")
106'' (269 cm) 235 cm (92'') 132 cm (52'') 1.9 m (6' 2") –66.0 cm (–2563/64") –34.3 cm (–1333/64") ±25.8 cm (105/32")

100'' (254 cm) 221 cm (87'') 125 cm (49'') 1.8 m (5'10") –62.3 cm (–2433/64") –32.4 cm (–123/4") ±24.4 cm (919/32")

92'' (234 cm) 204 cm (80'') 115 cm (45'') 1.6 m (5' 4") –57.3 cm (–2235/64") –29.8 cm (–1147/64") ±22.4 cm (853/64")
84'' (213 cm) 186 cm (73'') 105 cm (41'') 1.5 m (4'11") –52.3 cm (–2019/32") –27.2 cm (–1045/64") ±20.5 cm (83/64")
72'' (183 cm) 159 cm (63'') 90 cm (35'') 1.3 m (4' 2") –44.8 cm (–17

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

Distance from the lens center to

the bottom of the image [H]

21

/32") –23.3 cm (–911/64") ±17.5 cm (629/32")

The formula for picture size and projection distance

[m/cm]

L (m) = 0.01771
H1 (cm) = –0.62263
H2 (cm) = –0.32377
W (cm) = ±0.24352

[Feet/inches]

L (ft) = 0.01771
H1 (in) =
H2 (in) =
W (in) = ±0.24352

χ

χ
χ

χ

χ

/ 0.3048

–

0.62263χ / 2.54

–

0.32377χ / 2.54

χ

/ 2.54

Distance from the lens

center to the center of the

image [W]

23

/64") ±17.9 cm (73/64")

Distance from the lens

center to the center of the

image [W]

Note

• There may be an error of ± 3% in the above values.

• Values with a minus (–) sign indicate the distance from the lens center below the bottom of the image.

-5

Screen Size and Projection Distance

Wide-zoom Lens (AN-PH20EZ)

F2.5, f=21.2-25.8 mm

NORMAL Mode (4:3)

Picture (Screen) size Projection distance [L]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
250" (635 cm) 508 cm (200") 381 cm (150") 7.6 m (25' 0") 9.1 m (30' 0")
200" (508 cm) 406 cm (160") 305 cm (120") 6.1 m (20' 0") 7.3 m (24' 0")

150" (381 cm) 305 cm (120") 229 cm (90") 4.6 m (15' 0") 5.5 m (18' 0")
100" (254 cm) 203 cm (80") 152 cm (60") 3.0 m (10' 0") 3.7 m (12' 0")

84" (213 cm) 171 cm (67") 128 cm (50") 2.6 m (8' 5") 3.1 m (10' 1")
80" (203 cm) 163 cm (64") 122 cm (48") 2.4 m (8' 0") 2.9 m (9' 7")

72" (183 cm) 146 cm (58") 110 cm (43") 2.2 m (7' 2") 2.6 m (8' 8")
70" (178 cm) 142 cm (56") 107 cm (42") 2.1 m (7' 0") 2.6 m (8' 5")
60" (152 cm) 122 cm (48") 91 cm (36") 1.8 m (6' 0") 2.2 m (7' 2")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

Distance from the lens center to

the bottom of the image [H]

–190.5 cm (–75") 0 cm (0") ±76.2 cm (30")
–152.4 cm (–60") 0 cm (0") ±61.0 cm (24")

–114.3 cm (–45") 0 cm (0") ±45.7 cm (18")

–76.2 cm (–30") 0 cm (0") ±30.5 cm (12")
–64.0 cm (–2513/64") 0 cm (0") ±25.6 cm (105/64")
–61.0 cm (–24") 0 cm (0") ±24.4 cm (919/32")

–54.9 cm (–2119/32") 0 cm (0") ±21.9 cm (841/64")
–53.3 cm (–21") 0 cm (0") ±21.3 cm (813/32")
–45.7 cm (–18") 0 cm (0") ±18.3 cm (713/64")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.03048
L2 (m) = 0.03658
H1 (cm) = –0.762
W (cm) = ±0.3048

[Feet/inches]

L1 (ft) = 0.03048
L2 (ft) = 0.03658
H1 (in) =
W (in) = ±0.3048

χ
χ
χ

χ

χ

/ 0.3048

χ

/ 0.3048

–

0.762χ / 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

STRETCH Mode (16:9)

Picture (Screen) size Projection distance [L]

Distance from the lens center to

the bottom of the image [H]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]

225" (572 cm) 498 cm (196") 280 cm (110") 7.5 m (24' 6") 9.0 m (29' 5")
200" (508 cm) 443 cm (174") 249 cm (98") 6.6 m (21' 9") 8.0 m (26' 2")
150" (381 cm) 332 cm (131") 187 cm (74") 5.0 m (16' 4") 6.0 m (19' 7")
133" (338 cm) 294 cm (116") 166 cm (65") 4.4 m (14' 6") 5.3 m (17' 5")

106" (269 cm) 235 cm (92") 132 cm (52") 3.5 m (11' 7") 4.2 m (13'10")
100" (254 cm) 221 cm (87") 125 cm (49") 3.3 m (10' 11") 4.0 m (13' 1")

92" (234 cm) 204 cm (80") 115 cm (45") 3.1 m (10' 0") 3.7 m (12' 0")
84" (213 cm) 186 cm (73") 105 cm (41") 2.8 m (9' 2") 3.3 m (11' 0")

72" (183 cm) 159 cm (63") 90 cm (35") 2.4 m (7' 10") 2.9 m (9' 5")
60" (152 cm) 133 cm (52") 75 cm (29") 2.0 m (6' 6") 2.4 m (7'10")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

–140.1 cm (–555/32") 46.7 cm (1825/64") ±74.7 cm (2927/64")
–124.5 cm (–491/32") 41.5 cm (1611/32") ±66.4 cm (269/64")

–93.4 cm (–3649/64") 31.1 cm (121/4") ±49.8 cm (1939/64")
–82.8 cm (–3239/64") 27.6 cm (107/8") ±44.2 cm (1725/64")

–66.0 cm (–2563/64") 22.0 cm (821/32") ±35.2 cm (1355/64")
–62.3 cm (–2433/64") 20.8 cm (811/64") ±33.2 cm (135/64")
–57.3 cm (–2235/64") 19.1 cm (733/64") ±30.6 cm (121/32")
–52.3 cm (–2019/32") 17.4 cm (655/64") ±27.9 cm (1063/64")

–44.8 cm (–1721/32") 14.9 cm (557/64") ±23.9 cm (913/32")
–37.4 cm (–1445/64") 12.5 cm (429/32") ±19.9 cm (727/32")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.03321
L2 (m) = 0.03985
H1 (cm) = –0.62263
H2 (cm) = 0.20754
W (cm) = ±0.33207

[Feet/inches]

L1 (ft) = 0.03321
L2 (ft) = 0.03985
H1 (in) =
H2 (in) = 0.20754
W (in) = ±0.33207

χ
χ

χ

χ

χ

χ

/ 0.3048

χ

/ 0.3048

–

0.62263χ / 2.54

χ

/ 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

Note

• There may be an error of ± 3% in the above values.

• Values with a minus (–) sign indicate the distance from the lens center below the bottom of the image.

-6

Screen Size and Projection Distance

Tele-zoom Lens (AN-PH40EZ)

F2.4-F2.5, f=31.9-42.5 mm

NORMAL Mode (4:3)

Picture (Screen) size Projection distance [L]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
250" (635 cm) 508 cm (200") 381 cm (150") 11.4 m (37' 6") 15.2 m (50' 0")
200" (508 cm) 406 cm (160") 305 cm (120") 9.1 m (30' 0") 12.2 m (40' 0")

150" (381 cm) 305 cm (120") 229 cm (90") 6.9 m (22' 6") 9.1 m (30' 0")
100" (254 cm) 203 cm (80") 152 cm (60") 4.6 m (15' 0") 6.1 m (20' 0")

84" (213 cm) 171 cm (67") 128 cm (50") 3.8 m (12' 7") 5.1 m (16'10")
80" (203 cm) 163 cm (64") 122 cm (48") 3.7 m (12' 0") 4.9 m (16' 0")

72" (183 cm) 146 cm (58") 110 cm (43") 3.3 m (10' 10") 4.4 m (14' 5")
70" (178 cm) 142 cm (56") 107 cm (42") 3.2 m (10' 6") 4.3 m (14' 0")
60" (152 cm) 122 cm (48") 91 cm (36") 2.7 m (9' 0") 3.7 m (12' 0")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

Distance from the lens center to

the bottom of the image [H]

–190.5 cm (–75") 0 cm (0") ±76.2 cm (30")
–152.4 cm (–60") 0 cm (0") ±61.0 cm (24")

–114.3 cm (–45") 0 cm (0") ±45.7 cm (18")

–76.2 cm (–30") 0 cm (0") ±30.5 cm (12")
–64.0 cm (–2513/64") 0 cm (0") ±25.6 cm (105/64")
–61.0 cm (–24") 0 cm (0") ±24.4 cm (919/32")

–54.9 cm (–2119/32") 0 cm (0") ±21.9 cm (841/64")
–53.3 cm (–21") 0 cm (0") ±21.3 cm (813/32")
–45.7 cm (–18") 0 cm (0") ±18.3 cm (713/64")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.04572
L2 (m) = 0.06096
H1 (cm) = –0.762
W (cm) = ±0.3048

[Feet/inches]

L1 (ft) = 0.04572
L2 (ft) = 0.06096
H1 (in) = –0.762
W (in) = ±0.3048

χ
χ
χ

χ

χ

/ 0.3048

χ

/ 0.3048

χ

/ 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

STRETCH Mode (16:9)

Picture (Screen) size Projection distance [L]

Distance from the lens center to

the bottom of the image [H]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]

225" (572 cm) 498 cm (196") 280 cm (110") 11.2 m (36' 9") 14.9 m (49' 0")
200" (508 cm) 443 cm (174") 249 cm (98") 10.0 m (32' 8") 13.3 m (43' 7")
150" (381 cm) 332 cm (131") 187 cm (74") 7.5 m (24' 6") 10.0 m (32' 8")
133" (338 cm) 294 cm (116") 166 cm (65") 6.6 m (21' 9") 8.8 m (29' 0")

106" (269 cm) 235 cm (92") 132 cm (52") 5.3 m (17' 4") 7.0 m (23' 1")
100" (254 cm) 221 cm (87") 125 cm (49") 5.0 m (16' 4") 6.6 m (21' 9")

92" (234 cm) 204 cm (80") 115 cm (45") 4.6 m (15' 0") 6.1 m (20' 1")
84" (213 cm) 186 cm (73") 105 cm (41") 4.2 m (13' 9") 5.6 m (18' 4")

72" (183 cm) 159 cm (63") 90 cm (35") 3.6 m (11' 9") 4.8 m (15' 8")
60" (152 cm) 133 cm (52") 75 cm (29") 3.0 m (9' 10") 4.0 m (13' 1")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

–140.1 cm (–555/32") 46.7 cm (1825/64") ±74.7 cm (2927/64")
–124.5 cm (–491/32") 41.5 cm (1611/32") ±66.4 cm (269/64")

–93.4 cm (–3649/64") 31.1 cm (121/4") ±49.8 cm (1939/64")
–82.8 cm (–3239/64") 27.6 cm (107/8") ±44.2 cm (1725/64")

–66.0 cm (–2563/64") 22.0 cm (821/32") ±35.2 cm (1355/64")
–62.3 cm (–2433/64") 20.8 cm (811/64") ±33.2 cm (135/64")
–57.3 cm (–2235/64") 19.1 cm (733/64") ±30.6 cm (121/32")
–52.3 cm (–2019/32") 17.4 cm (655/64") ±27.9 cm (1063/64")

–44.8 cm (–1721/32") 14.9 cm (557/64") ±23.9 cm (913/32")
–37.4 cm (–1445/64") 12.5 cm (429/32") ±19.9 cm (727/32")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.04981
L2 (m) = 0.06641
H1 (cm) = –0.62263
H2 (cm) = 0.20754
W (cm) = ±0.33207

[Feet/inches]

L1 (ft) = 0.04981
L2 (ft) = 0.06641
H1 (in) = –0.62263
H2 (in) = 0.20754
W (in) = ±0.33207

χ
χ

χ

χ

χ

χ

/ 0.3048

χ

/ 0.3048

χ

/ 2.54

χ

/ 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

Note

• There may be an error of ± 3% in the above values.

• Values with a minus (–) sign indicate the distance from the lens center below the bottom of the image.

-7

Screen Size and Projection Distance

Tele-zoom Lens (AN-PH50EZ)

F2.5, f=40.8-62.8 mm

NORMAL Mode (4:3)

Picture (Screen) size Projection distance [L]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
250" (635 cm) 508 cm (200") 381 cm (150") 15.2 m (50' 0") 22.9 m (75' 0")
200" (508 cm) 406 cm (160") 305 cm (120") 12.2 m (40' 0") 18.3 m (60' 0")

150" (381 cm) 305 cm (120") 229 cm (90") 9.1 m (30' 0") 13.7 m (45' 0")
100" (254 cm) 203 cm (80") 152 cm (60") 6.1 m (20' 0") 9.1 m (30' 0")

84" (213 cm) 171 cm (67") 128 cm (50") 5.1 m (16' 10") 7.7 m (25' 2")
80" (203 cm) 163 cm (64") 122 cm (48") 4.9 m (16' 0") 7.3 m (24' 0")

72" (183 cm) 146 cm (58") 110 cm (43") 4.4 m (14' 5") 6.6 m (21' 7")
70" (178 cm) 142 cm (56") 107 cm (42") 4.3 m (14' 0") 6.4 m (21' 0")
60" (152 cm) 122 cm (48") 91 cm (36") 3.7 m (12' 0") 5.5 m (18' 0")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

Distance from the lens center to

the bottom of the image [H]

–190.5 cm (–75") 0 cm (0") ±76.2 cm (30")
–152.4 cm (–60") 0 cm (0") ±61.0 cm (24")

–114.3 cm (–45") 0 cm (0") ±45.7 cm (18")

–76.2 cm (–30") 0 cm (0") ±30.5 cm (12")
–64.0 cm (–2513/64") 0 cm (0") ±25.6 cm (105/64")
–61.0 cm (–24") 0 cm (0") ±24.4 cm (919/32")

–54.9 cm (–2119/32") 0 cm (0") ±21.9 cm (841/64")
–53.3 cm (–21") 0 cm (0") ±21.3 cm (813/32")
–45.7 cm (–18") 0 cm (0") ±18.3 cm (713/64")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.06096
L2 (m) = 0.09144
H1 (cm) = –0.762
W (cm) = ±0.3048

[Feet/inches]

L1 (ft) = 0.06096
L2 (ft) = 0.09144
H1 (in) =
W (in) = ±0.3048

χ
χ
χ

χ

χ

/ 0.3048

χ

/ 0.3048

–

0.762χ / 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

STRETCH Mode (16:9)

Picture (Screen) size Projection distance [L]

Distance from the lens center to

the bottom of the image [H]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]

225" (572 cm) 498 cm (196") 280 cm (110") 14.9 m (49' 0") 22.4 m (73' 6")
200" (508 cm) 443 cm (174") 249 cm (98") 13.3 m (43' 7") 19.9 m (65' 4")
150" (381 cm) 332 cm (131") 187 cm (74") 10.0 m (32' 8") 14.9 m (49' 0")
133" (338 cm) 294 cm (116") 166 cm (65") 8.8 m (29' 0") 13.2 m (43' 6")

106" (269 cm) 235 cm (92") 132 cm (52") 7.0 m (23' 1") 10.6 m (34' 8")
100" (254 cm) 221 cm (87") 125 cm (49") 6.6 m (21' 9") 10.0 m (32' 8")

92" (234 cm) 204 cm (80") 115 cm (45") 6.1 m (20' 1") 9.2 m (30' 1")
84" (213 cm) 186 cm (73") 105 cm (41") 5.6 m (18' 4") 8.4 m (27' 5")

72" (183 cm) 159 cm (63") 90 cm (35") 4.8 m (15' 8") 7.2 m (23' 6")
60" (152 cm) 133 cm (52") 75 cm (29") 4.0 m (13' 1") 6.0 m (19' 7")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

–140.1 cm (–555/32") 46.7 cm (1825/64") ±74.7 cm (2927/64")
–124.5 cm (–491/32") 41.5 cm (1611/32") ±66.4 cm (269/64")

–93.4 cm (–3649/64") 31.1 cm (121/4") ±49.8 cm (1939/64")
–82.8 cm (–3239/64") 27.6 cm (107/8") ±44.2 cm (1725/64")

–66.0 cm (–2563/64") 22.0 cm (821/32") ±35.2 cm (1355/64")
–62.3 cm (–2433/64") 20.8 cm (811/64") ±33.2 cm (135/64")
–57.3 cm (–2235/64") 19.1 cm (733/64") ±30.6 cm (121/32")
–52.3 cm (–2019/32") 17.4 cm (655/64") ±27.9 cm (1063/64")

–44.8 cm (–1721/32") 14.9 cm (557/64") ±23.9 cm (913/32")
–37.4 cm (–1445/64") 12.5 cm (429/32") ±19.9 cm (727/32")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.06641
L2 (m) = 0.09962
H1 (cm) = –0.62263
H2 (cm) = 0.20754
W (cm) = ±0.33207

[Feet/inches]

L1 (ft) = 0.06641
L2 (ft) = 0.09962
H1 (in) =
H2 (in) = 0.20754
W (in) = ±0.33207

χ
χ

χ

χ

χ

χ

/ 0.3048

χ

/ 0.3048

–

0.62263χ / 2.54

χ

/ 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

Note

• There may be an error of ± 3% in the above values.

• Values with a minus (–) sign indicate the distance from the lens center below the bottom of the image.

-8

Screen Size and Projection Distance

Tele-zoom Lens (AN-PH60EZ)

F2.4-F2.5, f=62.1-97.8 mm

NORMAL Mode (4:3)

Picture (Screen) size Projection distance [L]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
250" (635 cm) 508 cm (200") 381 cm (150") 22.9 m (75' 0") 35.6 m (116' 8")
200" (508 cm) 406 cm (160") 305 cm (120") 18.3 m (60' 0") 28.4 m (93' 4")

150" (381 cm) 305 cm (120") 229 cm (90") 13.7 m (45' 0") 21.3 m (70' 0")
100" (254 cm) 203 cm (80") 152 cm (60") 9.1 m (30' 0") 14.2 m (46' 8")

84" (213 cm) 171 cm (67") 128 cm (50") 7.7 m (25' 2") 11.9 m (39' 2")
80" (203 cm) 163 cm (64") 122 cm (48") 7.3 m (24' 0") 11.4 m (37' 4")

72" (183 cm) 146 cm (58") 110 cm (43") 6.6 m (21' 7") 10.2 m (33' 7")
70" (178 cm) 142 cm (56") 107 cm (42") 6.4 m (21' 0") 10.0 m (32' 8")
60" (152 cm) 122 cm (48") 91 cm (36") 5.5 m (18' 0") 8.5 m (28' 0")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

Distance from the lens center to

the bottom of the image [H]

–190.5 cm (–75") 0 cm (0") ±76.2 cm (30")
–152.4 cm (–60") 0 cm (0") ±61.0 cm (24")

–114.3 cm (–45") 0 cm (0") ±45.7 cm (18")

–76.2 cm (–30") 0 cm (0") ±30.5 cm (12")
–64.0 cm (–2513/64") 0 cm (0") ±25.6 cm (105/64")
–61.0 cm (–24") 0 cm (0") ±24.4 cm (919/32")

–54.9 cm (–2119/32") 0 cm (0") ±21.9 cm (841/64")
–53.3 cm (–21") 0 cm (0") ±21.3 cm (813/32")
–45.7 cm (–18") 0 cm (0") ±18.3 cm (713/64")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.09144
L2 (m) = 0.14224
H1 (cm) = –0.762
W (cm) = ±0.3048

[Feet/inches]

L1 (ft) = 0.09144
L2 (ft) = 0.14224
H1 (in) =
W (in) = ±0.3048

χ
χ
χ

χ

χ

/ 0.3048

χ

/ 0.3048

–

0.762χ / 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

STRETCH Mode (16:9)

Picture (Screen) size Projection distance [L]

Distance from the lens center to

the bottom of the image [H]

Diag. [χ] Width Height Minimum [L1] Maximum [L2] Lower [H1] Upper [H2]
225" (572 cm) 498 cm (196") 280 cm (110") 22.4 m (73' 6") 34.9 m (114' 5")
200" (508 cm) 443 cm (174") 249 cm (98") 19.9 m (65' 4") 31.0 m (101' 8")
150" (381 cm) 332 cm (131") 187 cm (74") 14.9 m (49' 0") 23.2 m (76' 3")

133" (338 cm) 294 cm (116") 166 cm (65") 13.2 m (43' 6") 20.6 m (67' 7")
106" (269 cm) 235 cm (92") 132 cm (52") 10.6 m (34' 8") 16.4 m (53' 11")
100" (254 cm) 221 cm (87") 125 cm (49") 10.0 m (32' 8") 15.5 m (50' 10")

92" (234 cm) 204 cm (80") 115 cm (45") 9.2 m (30' 1") 14.3 m (46' 9")

84" (213 cm) 186 cm (73") 105 cm (41") 8.4 m (27' 5") 13.0 m (42' 8")
72" (183 cm) 159 cm (63") 90 cm (35") 7.2 m (23' 6") 11.2 m (36' 7")
60" (152 cm) 133 cm (52") 75 cm (29") 6.0 m (19' 7") 9.3 m (30' 6")

χ

: Picture size (diag.) (in/cm)
L: Projection distance(m/ft)
L1: Minimum projection distance (m/ft)
L2: Maximum projection distance (m/ft)
H: Distance from the lens center to the bottom of the image (cm/in)
H1: Lower distance from the lens center to the bottom of the image (cm/in)
H2: Upper distance from the lens center to the bottom of the image (cm/in)
W: Distance from the lens center to the center of the image (cm/in)

–140.1 cm (–555/32") 46.7 cm (1825/64") ±74.7 cm (2927/64")
–124.5 cm (–491/32") 41.5 cm (1611/32") ±66.4 cm (269/64")

–93.4 cm (–3649/64") 31.1 cm (121/4") ±49.8 cm (1939/64")

–82.8 cm (–3239/64") 27.6 cm (107/8") ±44.2 cm (1725/64")
–66.0 cm (–2563/64") 22.0 cm (821/32") ±35.2 cm (1355/64")
–62.3 cm (–2433/64") 20.8 cm (811/64") ±33.2 cm (135/64")
–57.3 cm (–2235/64") 19.1 cm (733/64") ±30.6 cm (121/32")

–52.3 cm (–2019/32") 17.4 cm (655/64") ±27.9 cm (1063/64")
–44.8 cm (–1721/32") 14.9 cm (557/64") ±23.9 cm (913/32")
–37.4 cm (–1445/64") 12.5 cm (429/32") ±19.9 cm (727/32")

The formula for picture size and projection distance

[m/cm]

L1 (m) = 0.09962
L2 (m) = 0.15497
H1 (cm) = –0.62263
H2 (cm) = 0.20754
W (cm) = ±0.33207

[Feet/inches]

L1 (ft) = 0.09962
L2 (ft) = 0.15497
H1 (in) =
H2 (in) = 0.20754
W (in) = ±0.33207

χ
χ

χ

χ

χ

χ

/ 0.3048

χ

/ 0.3048

–

0.62263χ / 2.54

χ

/ 2.54

χ

/ 2.54

Distance from the lens
center to the center of

the image [W]

Note

• There may be an error of ± 3% in the above values.

• Values with a minus (–) sign indicate the distance from the lens center below the bottom of the image.

-9

Connecting Pin Assignments

RGB Signal Terminal (INPUT 1 and OUTPUT (FOR INPUT 1, 2)): 15-pin mini D-sub female connector

RGB Input

10

15

6

5

1

11

1. Video input (red)

2. Video input (green/sync on green)

3. Video input (blue)

4. Not connected

5. Not connected

6. Earth (red)

7. Earth (green/sync on green)

8. Earth (blue)

9. Not connected

10. GND

11. Not connected

12. Bi-directional data

13. Horizontal sync signal: TTL level

14. Vertical sync signal: TTL level

15. Data clock

RS-232C Terminal: 9-pin D-sub male connector

Pin No. Signal Name I/O Reference

51

96

1 Not connected
2RDReceive Data Input Connected to internal circuit
3SDSend Data Output Connected to internal circuit
4 Not connected
5SGSignal Ground Connected to internal circuit
6 Not connected
7RSRequest to Send Connected to CS in internal circuit
8CSClear to Send Connected to RS in internal circuit
9 Not connected

Component Input

R (CR)

1. P

2. Y

3. P

(CB)

B

4. Not connected

5. Not connected

6. Earth (P

7. Earth (Y)

8. Earth (P

9. Not connected

10. Not connected

11. Not connected

12. Not connected

13. Not connected

14. Not connected

15. Not connected

R

B)

)

RS-232C Cable Recommended Connection: 9-pin D-sub female connector

51

96

Pin No. Signal Pin No. Signal

1CD 1 CD
2RD 2 RD
3SD 3 SD
4ER 4 ER
5SG 5 SG
6DR 6 DR
7RS 7 RS
8CS 8 CS
9CI 9 CI

Note

• Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling
device (e.g. computer).

Projector

Pin No.

4
5
6

Computer

Pin No.

4
5
6

LAN Terminal: 8-pin RJ-45 modular connector

Pin No. Signal Pin No. Signal

1 TX+ 5
2 TX– 6 RX–
3 RX+ 7

8... 1

48

-10

DVI digital Terminal (INPUT 3)

Connecting Pin Assignments

16

Pin No. Signal

1724

8

1

9

1T.M.D.S. Data 2–
2T.M.D.S. Data 2+
3T.M.D.S. Data 2 Shield
4 Not connected
5 Not connected
6 DDC Clock
7 DDC Data
8 Not connected

9T.M.D.S. Data 1–
10 T.M.D.S. Data 1+
11 T.M.D.S. Data 1 Shield
12 Not connected
13 Not connected
14 +5 V Power
15 Ground
16 Hot Plug Detect

Pin No. Signal

17 T.M.D.S. Data 0–
18 T.M.D.S. Data 0+
19 T.M.D.S. Data 0 Shield
20 Not connected
21 Not connected
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock–

-11

RS-232C Specifications and Commands

Computer control

A computer can be used to control the projector by connecting an RS-232C serial control cable (cross type,
commercially available) to the projector. (See page 27 of the projector’s operation manual for connection.)

Communication conditions

Set the serial port settings of the computer to match that of the table.
Signal format: Conforms to RS-232C standard. Parity bit: None
Baud rate*: 9,600 bps / 38,400 bps / 115,200 bps Stop bit: 1 bit
Data length: 8 bits Flow control: None

*Set the projector’s baud rate to the same rate as used by the computer.

Basic format

Commands from the computer are sent in the following order: command, parameter, and return code. After
the projector processes the command from the computer, it sends a response code to the computer.

Command format

C1 C2 C3 C4 P1 P2 P3 P4

Response code format

Normal response

O K E R R

Command 4-digit Parameter 4-digit

Problem response (communication error or incorrect command)

Return code (0DH)

Return code (0DH)

Return code (

0DH)

Info

• When you have more than one command to give to the projector, send each of them only after the re­sponse code for the previous one is received.

• “POWR????” “TABN _ _ _ 1” “TLPS _ _ _ 1” “TLPS _ _ _ 2” “TPOW _ _ _ 1” “TLPN _ _ _ 1” “TLTT _ _ _ 1”
“TLTT _ _ _ 2” “TLTL _ _ _ 1” “TLTL _ _ _ 2” “TNAM _ _ _ 1” “MNRD _ _ _ 1” “SNRD _ _ _ 1” “PJN0 _ _ _ 1”
When the projector receives a command shown above :
* The on-screen display will not disappear.
* The “Auto Power Off” timer will not be reset.

Note

• When controlling the projector using the RS-232C commands, you cannot confirm the projector setting
values from the computer. To confirm each setting value, send the display command for each menu (e.g.
RARE _ _ _ 0), and then refer to the on-screen display. When using the setting/adjustment commands other
than the menu display commands, the settings/adjustments are executed without the on-screen display.

-12

RS-232C Specifications and Commands

Commands

Example: When turning on the projector, make the following setting.

ProjectorComputer

OK

Power on

POWR _ 1__

Control Contents

Power Off
Power On
Power Status
Projector Condition

Lamp 1 Status
Lamp 2 Status
Lamp Power Status
Lamp Quantity
Volume (0 - 60)
Mute Off
Mute On
Lens Focus (-255 - +255)
Lens Zoom (-255 - +255)
Ver tical Lens Shift (Compatible with old command)
Ver tical Lens Shift (-800 - +800)
Horizontal Lens Shift (-800 - +800)
Ver tical Keystone (Compatible with old command)
Ver tical Keystone (-60 - +60)
Horizontal Keystone (-60 - +60)
Image Resizing(-30 - +30)
Black Screen Off
Black Screen On
INPUT 1 (RGB1)
INPUT 2 (RGB2)
INPUT 3 (RGB3)
INPUT RGB Check
INPUT 4 (Video1)
INPUT 5 (Video2)
INPUT Video Check
INPUT Mode Check
INPUT Check
Freeze Off
Freeze On
Auto Sync Start
INPUT 1 Resize : Normal
INPUT 1 Resize : Stretch (Video only)
INPUT 1 Resize : Dot By Dot (Computer) / Border (Video)
INPUT 1 Resize : Smart Stretch (Video only)
INPUT 1 Resize : Full
INPUT 2 Resize : Normal
INPUT 2 Resize : Stretch (Video only)
INPUT 2 Resize : Dot By Dot (Computer) / Border (Video)
INPUT 2 Resize : Smart Stretch (Video only)
INPUT 2 Resize : Full
INPUT 3 Resize : Normal
INPUT 3 Resize : Stretch (Video only)
INPUT 3 Resize : Dot By Dot (Computer) / Border (Video)
INPUT 3 Resize : Smart Stretch (Video only)
INPUT 3 Resize : Full
INPUT 4 Resize : Normal
INPUT 4 Resize : Stretch
INPUT 4 Resize : Border
INPUT 4 Resize : Smart Stretch
INPUT 5 Resize : Normal
INPUT 5 Resize : Stretch
INPUT 5 Resize : Border
INPUT 5 Resize : Smart Stretch
INPUT 1 Picture Mode : Standard
INPUT 1 Picture Mode : Presentation
INPUT 1 Picture Mode : Cinema
INPUT 1 Picture Mode : Custom
INPUT 1 Contrast (-30 - +30)
INPUT 1 Bright (-30 - +30)
INPUT 1 Color (-30 - +30)
INPUT 1 Tint (-30 - +30)
INPUT 1 Red (-30 - +30)
INPUT 1 Green (-30 - +30)
INPUT 1 Blue (-30 - +30)
INPUT 1 Sharp (-30 - +30)
INPUT 1 CLR Temp *1
INPUT 1 Bright Boost (0 - 10)
INPUT 1 Progressive : 2D
INPUT 1 Progressive : 3D
INPUT 1 Progressive : Film Mode

Command

POWR
POWR
POWR

TABN

TLPS
TLPS
TPOW

TLPN
VOL A
MUT E
MUT E

LNFO

LNZO

L NSH

L NUD

LNLR
KEYS
KEYV
KEYH

IMRS
IMBK
IMBK
IRGB
IRGB
IRGB
IRGB
IVED
IVED
IVED
IMOD

ICHK
FREZ
FREZ

ADJ S
RASR
RASR
RASR
RASR
RASR
RBSR
RBSR
RBSR
RBSR
RBSR
R CSR
R CSR
R CSR
R CSR
R CSR
R ASV
R ASV
R ASV
R ASV
R BSV
R BSV
R BSV
R BSV
R APS
R APS
R APS
R APS
RAP I
RABR
RACO
RAT I
RARD
RAGN
R ABE
RASH
RACT
R AWE
R AIP
R AIP
R AIP

→
←

Parameter

OK or ERR

___0

OK

___1

1

????

0:Normal,

___1

1:Temp High,
8:Lamp Life 5% or less,
16:Lamp Burnt-out,
32:Lamp Ignition Failure

0:Off, 1:On, 2:Retry, 3:Waiting, 4:Lamp Error

___1

0:Off, 1:On, 2:Retry, 3:Waiting, 4:Lamp Error

___2

1:On, 2:Cooling

___1

2

___1

OK or ERR

__* *

OK or ERR

___0

OK or ERR

___1

OK

_** *

OK

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

___0

OK or ERR

___1

OK or ERR

___1

OK or ERR

___2

OK or ERR

___3

1:RGB1(INPUT1), 2:RGB2(INPUT2), 3:RGB3(INPUT3), ERR

????

OK or ERR

___1

OK or ERR

___2

1:Video1(INPUT4), 2:Video2(INPUT5), ERR

????

1:RGB, 2:Video

????

1:INPUT1, 2:INPUT2, 3:INPUT3, 4:INPUT4, 5:INPUT5

????

OK or ERR

___0

OK or ERR

___1

OK or ERR

___1

OK or ERR

___1

OK or ERR

___2

OK or ERR

___3

OK or ERR

___4

OK or ERR

___5

OK or ERR

___1

OK or ERR

___2

OK or ERR

___3

OK or ERR

___4

OK or ERR

___5

OK or ERR

___1

OK or ERR

___2

OK or ERR

___3

OK or ERR

___4

OK or ERR

___5

OK or ERR

___1

OK or ERR

___2

OK or ERR

___3

OK or ERR

___4

OK or ERR

___1

OK or ERR

___2

OK or ERR

___3

OK or ERR

___4

OK or ERR

__10

OK or ERR

__11

OK or ERR

__12

OK or ERR

__13

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

_** *

OK or ERR

__* *

OK or ERR

___0

OK or ERR

___1

OK or ERR

___2

Return

Standby mode

(or 40-second startup time)

OK
OK or ERR
0
0:Normal,
1:Temp High,
2:Fan Error,
4:Intake Vent Cover Open,
8:Lamp Life 5% or less,
16:Lamp Burnt-out,
32:Lamp Ignition Failure,
64:Temp Abnormally High
0:Off, 4:Lamp Error
0:Off, 4:Lamp Error
0:Standby

ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR

-13

RS-232C Specifications and Commands

Control Contents

INPUT 1 DNR : Off
INPUT 1 DNR : Level 1
INPUT 1 DNR : Level 2
INPUT 1 DNR : Level 3
INPUT 1 Adjustment Reset
INPUT 1 Signal Type : Auto
INPUT 1 Signal Type : RGB
INPUT 1 Signal Type : Component
INPUT 1 Display (Status display)
INPUT 2 Picture Mode : Standard
INPUT 2 Picture Mode : Presentation
INPUT 2 Picture Mode : Cinema
INPUT 2 Picture Mode : Custom
INPUT 2 Contrast (-30 - +30)
INPUT 2 Bright (-30 - +30)
INPUT 2 Color (-30 - +30)
INPUT 2 Tint (-30 - +30)
INPUT 2 Red (-30 - +30)
INPUT 2 Green (-30 - +30)
INPUT 2 Blue (-30 - +30)
INPUT 2 Sharp (-30 - +30)
INPUT 2 CLR Temp *1
INPUT 2 Bright Boost (0 - 10)
INPUT 2 Progressive : 2D
INPUT 2 Progressive : 3D
INPUT 2 Progressive : Film Mode
INPUT 2 DNR : Off
INPUT 2 DNR : Level 1
INPUT 2 DNR : Level 2
INPUT 2 DNR : Level 3
INPUT 2 Adjustment Reset
INPUT 2 Signal Type : Auto
INPUT 2 Signal Type : RGB
INPUT 2 Signal Type : Component
INPUT 2 Display (Status display)
INPUT 3 Picture Mode : Standard
INPUT 3 Picture Mode : Presentation
INPUT 3 Picture Mode : Cinema
INPUT 3 Picture Mode : Custom
INPUT 3 Contrast (-30 - +30)
INPUT 3 Bright (-30 - +30)
INPUT 3 Color (-30 - +30)
INPUT 3 Tint (-30 - +30)
INPUT 3 Red (-30 - +30)
INPUT 3 Green (-30 - +30)
INPUT 3 Blue (-30 - +30)
INPUT 3 Sharp (-30 - +30)
INPUT 3 CLR Temp *1
INPUT 3 Bright Boost (0 - 10)
INPUT 3 DNR : Off
INPUT 3 DNR : Level 1
INPUT 3 DNR : Level 2
INPUT 3 DNR : Level 3
INPUT 3 Adjustment Reset
INPUT 3 Signal Type : D. PC RGB
INPUT 3 Signal Type : D. PC Component
INPUT 3 Signal Type : D. Video RGB
INPUT 3 Signal Type : D. Video Component
INPUT 3 Display (Status display)
INPUT 4 Picture Mode : Standard
INPUT 4 Picture Mode : Presentation
INPUT 4 Picture Mode : Cinema
INPUT 4 Picture Mode : Custom
INPUT 4 Contrast (-30 - +30)
INPUT 4 Bright (-30 - +30)
INPUT 4 Color (-30 - +30)
INPUT 4 Tint (-30 - +30)
INPUT 4 Red (-30 - +30)
INPUT 4 Green (-30 - +30)
INPUT 4 Blue (-30 - +30)
INPUT 4 Sharp (-30 - +30)
INPUT 4 CLR Temp *1
INPUT 4 Bright Boost (0 - 10)
INPUT 4 Progressive : 2D
INPUT 4 Progressive : 3D
INPUT 4 Progressive : Film Mode
INPUT 4 DNR : Off
INPUT 4 DNR : Level 1
INPUT 4 DNR : Level 2
INPUT 4 DNR : Level 3
INPUT 4 Adjustment Reset
INPUT 4 Display (Status display)
INPUT 5 Picture Mode : Standard
INPUT 5 Picture Mode : Presentation
INPUT 5 Picture Mode : Cinema
INPUT 5 Picture Mode : Custom
INPUT 5 Contrast (-30 - +30)
INPUT 5 Bright (-30 - +30)

Command

RANR
RANR
RANR
RANR
RARE

IASI
IASI
IASI

RARE
R BPS
R BPS
R BPS
R BPS
RBP I
RBBR
RBCO
RBT I
RBRD
RBGN
R BBE
RBSH
RBCT
R BWE
R BIP
R BIP
R BIP
RBNR
RBNR
RBNR
RBNR
RBRE

IBSI
IBSI
IBSI

RBRE
RCPS
RCPS
RCPS
RCPS
RCP I
R CBR
RCCO
RCT I
RCRD
R CGN
RCBE
R CSH
RCCT
RCWE
R CNR
RCNR
RCNR
RCNR
RCRE

ICSI
ICSI
ICSI
ICSI

RCRE
VAPS
VAPS
VAPS
VAPS
VAP I
VABR
VACO
VAT I
VARD
VAGN
VABE
VASH
VACT
V AWE
V AIP
V AIP
V AIP
VANR
VANR
VANR
VANR
V ARE
V ARE
VBPS
VBPS
VBPS
VBPS
VBP I
VBBR

Parameter

___0
___1
___2
___3
___1
___0
___1
___2
___0
__10
__11
__12
__13
_** *
_** *
_** *
_** *
_** *
_** *
_** *
_** *
_** *
__* *
___0
___1
___2
___0
___1
___2
___3
___1
___0
___1
___2
___0
__10
__11
__12
__13
_** *
_** *
_** *
_** *
_** *
_** *
_** *
_** *
_** *
__* *
___0
___1
___2
___3
___1
___3
___4
___5
___6
___0
__10
__11
__12
__13
_** *
_** *
_** *
_** *
_** *
_** *
_** *
_** *
_** *
__* *
___0
___1
___2
___0
___1
___2
___3
___1
___0
__10
__11
__12
__13
_** *
_** *

OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR

Power on

Return

Standby mode

(or 40-second startup time)

ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR

-14

RS-232C Specifications and Commands

Control Contents

INPUT 5 Color (-30 - +30)
INPUT 5 Tint (-30 - +30)
INPUT 5 Red (-30 - +30)
INPUT 5 Green (-30 - +30)
INPUT 5 Blue (-30 - +30)
INPUT 5 Sharp (-30 - +30)
INPUT 5 CLR Temp *1
INPUT 5 Bright Boost (0 - 10)
INPUT 5 Progressive : 2D
INPUT 5 Progressive : 3D
INPUT 5 Progressive : Film Mode
INPUT 5 DNR : Off
INPUT 5 DNR : Level 1
INPUT 5 DNR : Level 2
INPUT 5 DNR : Level 3
INPUT 5 Adjustment Reset
INPUT 5 Display (Status display)
INPUT 1 C.M.S. Adjustment : Standard
INPUT 1 C.M.S. Adjustment : sRGB
INPUT 1 C.M.S. Adjustment : Custom1
INPUT 1 C.M.S. Adjustment : Custom2
INPUT 1 C.M.S. Adjustment : Custom3
INPUT 2 C.M.S. Adjustment : Standard
INPUT 2 C.M.S. Adjustment : sRGB
INPUT 2 C.M.S. Adjustment : Custom1
INPUT 2 C.M.S. Adjustment : Custom2
INPUT 2 C.M.S. Adjustment : Custom3
INPUT 3 C.M.S. Adjustment : Standard
INPUT 3 C.M.S. Adjustment : sRGB
INPUT 3 C.M.S. Adjustment : Custom1
INPUT 3 C.M.S. Adjustment : Custom2
INPUT 3 C.M.S. Adjustment : Custom3
INPUT 4 C.M.S. Adjustment : Standard
INPUT 4 C.M.S. Adjustment : Custom1
INPUT 4 C.M.S. Adjustment : Custom2
INPUT 4 C.M.S. Adjustment : Custom3
INPUT 5 C.M.S. Adjustment : Standard
INPUT 5 C.M.S. Adjustment : Custom1
INPUT 5 C.M.S. Adjustment : Custom2
INPUT 5 C.M.S. Adjustment : Custom3
Target : Red
Target : Yellow
Target : Green
Target : Cyan
Target : Blue
Target : Magenta
Lightness (-30 - +30)
Chroma (-30 - +30)
Hue (-30 - +30)
Reset (This Color)
Reset (All Colors)
Clock (-150 - +150)
Phase (-60 - +60)
H-Position (-150 - +150)
V-Position (-60 - +60)
Fine Sync Display (Status display)
Fine Sync Adjustment Reset
Save Setting (1 - 7)
Select Setting (1 - 7)
RGB Horizontal Frequency Check
RGB Vertical Frequency Check
Auto Sync : Off
Auto Sync : Normal
Auto Sync : High Speed
Auto Sync Display : Off
Auto Sync Display : On
Balance (-30 - +30)
Treble (-30 - +30)
Bass (-30 - +30)
Audio Display (Status display)
Audio Adjustment Reset
Audio Out : FAO
Audio Out : VAO
Speaker : Off
Speaker : On
Pict in Pict : Bottom Right
Pict in Pict : Bottom Left
Pict in Pict : Upper Right
Pict in Pict : Upper Left
Pict in Pict : Off
Digital Shift (-96 - +96)
OSD Display : Normal
OSD Display : Level A
OSD Display : Level B
Black Screen Display : Off
Black Screen Display : On
Video System Selection : AUTO
Video System Selection : PAL
Video System Selection : SECAM
Video System Selection : NTSC4.43
Video System Selection : NTSC3.58

Command

VBCO
VBT I
VBRD
VBGN
VBBE
VBSH
VBCT
V BWE
V BIP
V BIP
V BIP
VBNR
VBNR
VBNR
VBNR
V BRE
V BRE
CSRA
CSRA
CSRA
CSRA
CSRA
CSRB
CSRB
CSRB
CSRB
CSRB
CSRC
CSRC
CSRC
CSRC
CSRC
C SVA
C SVA
C SVA
C SVA
C SVB
C SVB
C SVB
C SVB
CMT G
CMT G
CMT G
CMT G
CMT G
CMT G
CMS L
CMSC
CMSH
CMRE
CMRE

INCL
I NPH
I AHP
I AVP
I ARE
I ARE

MEMS
MEML
TFRQ
TFRQ
AADJ
AADJ
AADJ

IMAS
IMAS

AABL
A ATE
AABA
A ARE
A ARE
AOUT
AOUT
ASPK
ASPK
PINP
PINP
PINP
PINP
PINP
LNDS

IMD I
IMD I
IMD I
IMBO
IMBO

M ESY
M ESY
M ESY
M ESY
M ESY

Parameter

_ ***
_ ***
_ ***
_ ***
_ ***
_ ***
_ ***
__* *
_ __0
_ __1
_ __2
_ __0
_ __1
_ __2
_ __3
_ __1
_ __0
_ _00
_ _01
_ _11
_ _12
_ _13
_ _00
_ _01
_ _11
_ _12
_ _13
_ _00
_ _01
_ _11
_ _12
_ _13
_ _00
_ _11
_ _12
_ _13
_ _00
_ _11
_ _12
_ _13
_ __1
_ __2
_ __3
_ __4
_ __5
_ __6
__* *
__* *
__* *
_ __1
_ __2
* ***
_ ***
* ***
_ ***
_ __0
_ __1
___*
___*
_ __1
_ __2
_ __0
_ __1
_ __2
_ __0
_ __1
_ ***
_ ***
_ ***
_ __0
_ __1
_ __1
_ __2
_ __0
_ __1
_ _11
_ _12
_ _13
_ _14
_ __0
_ ***
_ __1
_ __2
_ __0
_ __0
_ __1
_ __1
_ __2
_ __3
_ __4
_ __5

OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
kHz (***.* or _)
Hz (***.* or _)
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR

Power on

Return

Standby mode

(or 40-second startup time)

ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR

-15

RS-232C Specifications and Commands

Control Contents

Video System Selection : PAL-M
Video System Selection : PAL-N
Background Selection : Logo
Background Selection : Custom
Background Selection : Blue
Background Selection : None
Startup Image Selection : Logo
Startup Image Selection : Custom
Startup Image Selection : None
Eco Mode : Standard
Eco Mode : Eco
Auto Search : Off
Auto Search : On
Auto Power Off : Disable
Auto Power Off : Enable
Lamp 1 Usage Time (Hour)
Lamp 2 Usage Time (Hour)
Lamp 1 Life (Percentage)
Lamp 2 Life (Percentage)
Lamp Mode : Both Lamps
Lamp Mode : Lamp 1 Only
Lamp Mode : Lamp 2 Only
Lamp Mode : Equal Use
PRJ Mode : Reverse Off
PRJ Mode : Reverse On
PRJ Mode : Invert Off
PRJ Mode : Invert On
Stack Setting : Normal
Stack Setting : Master
Stack Setting : Slave
Keylock Level : Normal
Keylock Level : Level A
Keylock Level : Level B
Set Inputs : INPUT 1 No Use
Set Inputs : INPUT 1 Use
Set Inputs : INPUT 2 No Use
Set Inputs : INPUT 2 Use
Set Inputs : INPUT 3 No Use
Set Inputs : INPUT 3 Use
Set Inputs : INPUT 4 No Use
Set Inputs : INPUT 4 Use
Set Inputs : INPUT 5 No Use
Set Inputs : INPUT 5 Use
Monitor Out : Disable
Monitor Out : Enable
LAN/RS232C : Disable
LAN/RS232C : Enable
Language Selection : ENGLISH
Language Selection : DEUTSCH
Language Selection : ESPAÑOL
Language Selection : NEDERLANDS
Language Selection : FRANÇAIS
Language Selection : ITALIANO
Language Selection : SVENSKA
Language Selection :
Language Selection : PORTUGUÊS
Language Selection :
Language Selection :
Model Name Check
Model Name Check 2
Serial No. Check *3
Projector Name Setting 1 (First four characters) *4
Projector Name Setting 2 (Middle four characters) *4
Projector Name Setting 3 (Last four characters) *4
Projector Name Check

Command

M ESY
M ESY

IMBG
IMBG
IMBG
IMBG
IMSI
IMSI
IMSI

T HMD
T HMD

INSE
INSE

APOW
APOW
TLTT
TLTT
TLTL
TLTL
LPMD
LPMD
LPMD
LPMD

IMRE
IMRE
IMIN
IMIN

STAK
STAK
STAK
KEYL
KEYL
KEYL
RAS I
RAS I
RBS I
RBS I
RCS I
RCS I
VAS I
VAS I
VBS I
VBS I
MOU T
MOU T
LNRS
LNRS
M ELA
M ELA
M ELA
M ELA
M ELA
M ELA
M ELA
M ELA
M ELA
M ELA
M ELA
TNAM
M NRD
S NRD
PJN1
PJN2
PJN3
PJN0

Parameter

___6
___7
___1
___2
___3
___4
___1
___2
___3
___0
___1
___0
___1
___0
___1
___1
___2
___1
___2
___0
___1
___2
___3
___0
___1
___0
___1
___0
___1
___2
___0
___1
___2
___0
___1
___0
___1
___0
___1
___0
___1
___0
___1
___0
___1
___0
___1
___1
___2
___3
___4
___5
___6
___7
___8
___9
__10
__11
___1
___1
___1
****
****
****
___1

OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
0 - 9999 (Integer)
0 - 9999 (Integer)
0% - 100% (Integer)
0% - 100% (Integer)
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
XGPH50X
XG-PH50X
Serial No.
OK or ERR
OK or ERR
OK or ERR
Projector Name

Power on

Return

Standby mode

(or 40-second startup time)

ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR

ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR

*2

ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR

Note

• If an underbar (_) appears in the parameter column, enter a space.

• If an asterisk (*) appears in the parameter column, enter a value in the range indicated in brackets under

Control Contents.

*1 Parameters of CLR Temp settings are as follows.

CLR Temp CLR TempParameter

4500K
5500K
6500K
7500K

_

045

_

055

_

065

_

075

8500K
9300K

10500K

Parameter

_

085

_

093

_

105

*2 Because the RS-232C function stops, the projector send no response code.
*3 Serial No. Check command is used to read out the 12 digits of serial No..
*4 For setting the projector name, send the commands in order of PJN1, PJN2 and PJN3.

-16

Setting up the Projector Network Environment

This section describes the basic procedure for using the projector via the network.
If the network is already constructed, the projector’s network settings may need to be changed. Please
consult your network administrator for assistance with these settings.

1. Connecting the projector to a computer

Connect a commercially available LAN cable (UTP cable, Category 5,
puter and projector.

LAN cable

cross-over type) between the com-

2. Setting an IP address for the computer

Adjust the IP settings of the computer to enable one-to-one communications with the projector.

Temporarily change
the computer’s IP
address.

3. Setting up a network connection for the projector

Page 18

Pages 19, 20

Adjust the projector network settings to conform to your network.

Use Internet Explorer
(version 5.0 or later)
to make various
projector settings.

Page 21

• Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or
other countries.

• All other company or product names are trademarks or registered trademarks of their respective compa­nies.

-17