CAMCORDER QUICK OPERATION GUIDE
1 Attaching the Battery |
2 Charging the Battery |
Pack |
Pack |
1 Make sure that the Power switch is set to OFF.
2 Align the =mark on the side of the battery pack with the =mark on the camcorder (1), and slide the battery pack in the direction of the arrow completely until it locks into place (2).
1 Make sure that the POWER switch is set to OFF.
2 Connect the supplied power cord to the AC power socket on the AC adapter, and insert the AC plug into a power outlet.
AC power socket
To power outlet
3 Insert the DC plug into the DC input jack.
• The charge indicator lights up.
DC input jack
Charge indicator
•The charge indicator turns off when the battery is charged.
4 Remove the DC plug from the DC input jack, then remove the AC plug from the power outlet.
Please consult the supplied operation manual for further details on these and other
functions of your camcorder.
3 Inserting a Cassette |
4 Tips on Recording |
|
Position |
1 Attach the power source to the camcorder, then slide the cassette compartment door release and open the cassette compartment door.
Cassette compartment door release
2 Insert a commercially available cassette fully with the window facing outwards, and with the erasure protect tab facing upwards.
Erasure protect tab
EVAS
REC
3 Press the Wmark gently until the cassette holder clicks into place.
“W” mark
4 Wait for the cassette holder to fully retract. Close the compartment door by pressing the centre until it clicks into place.
To create images that are easy to watch during playback, try to record with an upright posture and steady hand to prevent a shaky image.
Holding the camcorder
Place your right thumb close to the REC START/STOP button and Power Zoom control. Place your left thumb on the thumb rest on the left side of the screen.
Basic posture
Take care not to |
|
cover the lens or |
Place your elbows |
microphone with |
|
your finger. |
against your sides. |
Balance your 
weight on both
legs.
Shooting from a high angle
Turn the LCD monitor so that the screen faces downward.
Shooting from a low angle
Turn the LCD monitor so that the screen faces upward.
Web-site: www.sharp.co.uk/support Help Line UK:08705 274277, Ireland:(01) 676 0648
TINSE
02P -JKG
VL-NZ50H-Quick |
1 |
02.2.15, 11:01 AM |
Loading...