SHARP PQO15EZOlZZ, PQO18EZOlZZ, PQO25EZOlZZ, PQO3OEZOlZZ, PQO33EzolZZ Technical data

查询PQ015EZ01供应商

SHARP

ELECTRONIC COMPONENTS GROUP SHARP CORPORATIO

SPECIFICATION

/

DEVICE SPECIFICATION FOR

Applied model name

OlT’O-ELECI’RONIC D

VOLTAGE REGIJIX-OR

MODEL No.

PQ***EZO 12

1. These spectication sheets include materials protected under copyright of Sharp Corporation Wharp”). Please do not reproduce or cause anyone to reproduce them without Sharp’s consent.

2. When using this product, please observe the absolute maximum ratings and the instructtons for use in these specitkation sheets, as well as the precautions mentioned below. Sharp assumes no responsibthty for any damage resulting from use of the product which does not comply with the absolute mardmum ratings and the instructions included in these speciflcatton sheets, and the precautions mentioned below.

(Precautions)

(1) This product is designed for use in the following application areas :

l

OA equipment

* TelecommuntcaUon equipment (Terminal)

l

Tooling machines l Computers

[

If the use of the product tn the above application areas is for equipment h&d in paragraphs (2) or [3). please be sure to observe the precautions given in those respective paragraphs.

. Audio visual equipment l Home appliances

l

Measuring equipment

1

outlined

(2) Appropriate measures, such as fail-safe design and redundant design considering

the safety design of the overall system and equipment, should be taken to ensure reliability and safety when this product is used for equipment whtch demands htgh relfabtltty and safety in functfon and precision, such as :

l

Transportation control and safety equipment (atrcraft, tram, automobile etc.)

l

l Traffic signals

l

Other safety equipment

[

13) Please do not use this product for equipment which require extremely high relfabthty and safety in function and precision. such as :

* Space equipment * Nuclear power control equipment

[

(4) Please contact and consult with a Sharp sales representative if there are any questions

regarding interpretation of the above three paragraphs.

3. Please contact and consult with a Sharp sales representative for any questions about this product.

CUSTOMER’S APPROVAL

DATE

BY

Gas leakage sensor breakers l Rescue and securlly equipment

.

1

i

,

l

TelecommunicaUon equipment (for trunk lines>

*

Medical

equipment

DATE PRESENTED

BY

K. Hachimura, Department Engineering Dept..11

Opto-Electronic Devices Div.

ELECOM Group

SHARP CORPORATION

General Manager of

1

1. AppIication This specification appkes to the outbne and characteristics of

tape packing type series regulator (linear type), Model No. PQ***EZOlZ.

AppIied Model name

PQO15EZOlZZ. PQO18EZOlZZ. PQO25EZOlZZ. PQO3OEZOlZZ. PQO33EzolZZ PQO15EZOlZP. PQO18EZOlZP, PQO25EZOlZP, PQO3OEZOlZP, PQO33EZOlZP

usage

PQ++*EZOlZ are the device for stabikzation of DC positive output voltage with built-in ON/OFF function, the over current protection function, the overheat protection function and low consumpUon current at OFF-state (stand-by).

These devices are possible to use in power supply circuit up to current capacity IA.

Block diagram

DC input 0 (

SHARP CORPORATION

. . . ..-..______....1.-.-...-

DC output (‘Vo) ,

ON/OFF control (‘Vcl

. . . ..~~~~.I

GND

2. Outline : Refer to the attached sheet, Page 3.

3. Ratings and characteristics :

Refer to the attached sheet, Page 4 to 7.

3.1 Absolute maximum ratings a

3.2 Electrical characteristics

3.3 Electrical characterisUcs measuring circuit

3.4 Pd-Ta rating (Typical valuel

(,

i

4. ReIiability : Refer to the attached sheet, Page 8.9.

5. Outgoing inspection : Refer to the attached sheet, Page 9.

SHRRP CORPORATION

6. Supplement :

Refer to the attached sheet, Page 10 to 15.

6.1 Example of application

6.2 Taping and reel packaging (PQ***EZOlZP)

6.3 Sleeve packaging (PQ***EZO 122)

6.4 ODS materials This product shall not contain the following materials.

Also, the following materials shall not be used in the production process for this product.

Materials for ODS : CFC,. Halon. Carbon tetrachloride,

1.1.1 -‘Mchloroethane (Methylchloroform

6.5 Brominated flame retardants Specitk brominated flame retardants such as the PBBOs and PBB, are not used

in this device at all.

6.6 This product is not designed as electromagnetic and ionized-particle radiation resistant.

7. Notes : Refer to the attached sheet,

Page 16 to 18.

7.1 External connection

7.2 Thermal protection design

7.3 Static electricity

7.4 Soldering

7.5 For cleaning

I

(.

SHARP CORPORATlON

2. Outline

6.6 i’4AX

;,!. _.”

.

I

52~0.5

I

/- I / -#I

Model No.%

I

/

Lot No.

/(DIN standard)

2.3to.s

.

(.

i

I

Applied

I model No.

1 Marked

I

I model No. I

V~

t W030EZOlZZ

1 030E:

t Pii015E20127

I Ol!

PQO15EZOlZZ

015EZO1

PQ018E20122

018EzOl

WO25EzO1ZZ

025EZO 1

zol

1 P6033EZOlZZ

1 033EZOl

SE20 1

PQ018EzOIzz

018EZ01

PQ025EZO 1 ZZ

025EZO I

PQO3OEzO 1ZZ 030EZO I

. PQC----- _--

x33E7fi

172 I 033EZOl

1

I --~~

I

0 DC input (Vinl @I ON/OFF control (Vc) 0 DC output (Vo) @I NC (3 GND

*( ) :TYP.

l

Unit : mm

-Scale: 5/l

l

Lead finish : Solder plating

l

Lead material : Cu

- Product mass : 0.3g

% (Example of the marking in case of the PQ***EZO 12)

SHARP CORPORflTION

3. Ratings and characteristics

3.1 Absolute maximum ratings Ta=25C

Parameter Symbol

R-x!

unit

Conditions

Input voltage (‘1) Vin

10 V

Output control voltage

VC

10

V

(‘1) Output current 10 1

A

Power dissipation (*2) Pd 8

W Refer to Fig. 1

Junction temperature (*3)

T1

150

c

Operating temperature Topr -40 to +85

c

Storage temperature

Tstg

-40 to +150

c

Soldering temperature Tsol 260

c For 10 s

(+l) All are open except GND and applicable terminals. (*2) Pd : With infinite heat sink (*3) There is case that over heat protection operates at the condition Tj= 125% to 15OC

Fig. I Pd - Ta rating

Power

dissipation

Pd WI

10

8

Ambient temperature Ta (C)

i

Pd : With infinite heat sink (Note) There is case that over heat protection function operates at

oblique

line

portion.

SHRRP CORPORATION

3.2 EIectrlcal characteristics Unless otherwise specified condition shall be Wn=Vo(TYP)+lV. Io=O.SmA. Vc=2.7V. Ta=25’c

Parameter

Input voltage Output voltage Load regulation

Line regulation

Temperature coefacient TcVo - fO.01 of output voltage

Ripple rejection RR 45 60 Dropout voltage vi-o - 0.2 0.5 v On-state voltage for Vc (on) 2.0 - -

control On-state current for

control

Symbol MIN. TYP. MAX. unit

ViIl 2.35 - 10 v

vo Refer to list 1

RegL - 0.2 2.0 % 10=5mA to 1A

RegI - 0.1 1.0.

Ic (on) - - 200 PA

ow-v

%/C Io=SmA

Conditions

V

vin=vo(TYP)+ 1v

to Vo(TYP)+6v

10=5mA

Tj=O to 125C

dl3 Refer to Fig.3

(‘5). 10=0.5A

V

Off-state voltage for control

Off-state current for

control Quiescent current Output off-state

consumption current

(*4) Applied to PQO30EZOlZ and PQO33EZOlZ. (‘5) Input voltage when output voltage falls 0.95Vo by input voltage falling down, (+6) In case that the control terminal (0 pin) is non-connection, output voltage should be

OFF state.

List 1 Output voltage

Vc (ofi) - - 0.8 V

Ic (off) - - 2

h -

Iqs - -

1

2 mA 5

a

PA

vc=o.4v

Io=OA Io=OA

vc=o,4v