Sharp MX-M350/M450 U Service Manual

Page 1

Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

This document has been published to be used for after sales service only. The contents are subject to change without notice.

SERVICE MANUAL

CONTENTS

ION

CODE: 00ZMXM450/S1E

LASER PRINTER

MX-M350/M450 U

MODEL

MX-M350/M450 N

[1] GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

[2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

[3] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

[4] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . . . . 5-1

[6] UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . 6-1

[7] MAINTENANCE AND DETAILS OF EACH SECTION . . . . . . . . . . 7-1

[8] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

[9] SIMULATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

[10] MACHINE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

[11] TROUBLE CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

[12] ROM VERSION-UP METHOD . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

[13] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1

fineline6

Page 2

[1] GENERAL

1. Different points of MX-M350N/350U series

from AR-M355/M455 . . . . . . . . . . . . . . . . . . . . . . . . .1-1

2. Note for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

A. Cautions for servicing . . . . . . . . . . . . . . . . . . . . . .1-1

[2] CONFIGURATION

1. System configuration . . . . . . . . . . . . . . . . . . . . . . . . .2-1

A. Basic system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1

B. Option lineup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

C. List of combination of peripheral devices . . . . . . .2-4

[3] SPECIFICATIONS

1. Basic Specification . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

A. Base Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

B. Document Feeding Equipment . . . . . . . . . . . . . . .3-2

C. Output Equipment . . . . . . . . . . . . . . . . . . . . . . . . .3-2

2. Specific Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

A. Printer Function . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

B. Image send function . . . . . . . . . . . . . . . . . . . . . . .3-5

C. Copy function . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7

3. B/W Scanner Module (DSPF) . . . . . . . . . . . . . . . . . . .3-8

4. Rack for Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

[4] CONSUMABLE PARTS

1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

A. USA/Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

B. European Subsidiary/East Europe/Russia/

Australia/New Zealand . . . . . . . . . . . . . . . . . . . . .4-1

C. Taiwan (Aurora). . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

D. Asia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

E. Middle East/Africa/Israel/Philippines . . . . . . . . . . .4-1

F. Hong Kong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

G. China. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

2. Maintenance parts list. . . . . . . . . . . . . . . . . . . . . . . . .4-2

A. USA/Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

B. Europe/Australia/New Zealand/Taiwan. . . . . . . . .4-2

C. Agency/Asia/Middle East/Africa/

Latin America . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

D. Hong Kong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

E. China . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

2. Production number identification . . . . . . . . . . . . . . . .4-5

A. Drum cartridge. . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

B. Toner cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

C. Developer cartridge . . . . . . . . . . . . . . . . . . . . . . . .4-5

3. Environmental conditions . . . . . . . . . . . . . . . . . . . . . .4-5

A. Operating conditions . . . . . . . . . . . . . . . . . . . . . . .4-5

B. Storage conditions. . . . . . . . . . . . . . . . . . . . . . . . .4-5

[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES

1. Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

2. Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

3. Operation panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

4. Job status screen

(common to print, scan, fax and Internet fax) . . . . . . 5-4

5. BASE SCREEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

A. Condition settings screen. . . . . . . . . . . . . . . . . . . 5-5

B. Address book screen . . . . . . . . . . . . . . . . . . . . . . 5-6

6. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

A. Scanner unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

B. Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

7. Switch, Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

A. Scanner unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

B. Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

8. PWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

A. Scanner unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

B. Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

9. Motor, Clutch, Solenoid . . . . . . . . . . . . . . . . . . . . . . 5-10

A. Scanner unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

B. Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

[6] UNPACKING AND INSTALLATION

1. Installing procedure flowchart . . . . . . . . . . . . . . . . . . 6-1

2. Note for installation place . . . . . . . . . . . . . . . . . . . . . 6-2

3. Unpacking procedure . . . . . . . . . . . . . . . . . . . . . . . . 6-2

4. Unpacking and installation of the desk unit . . . . . . . . 6-3

A. AR-D28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

B. AR-D27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

C. AR-MU2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

5. Unpacking and installation of the rack (AR-RK2) . . . 6-9

6. Machine installing procedure. . . . . . . . . . . . . . . . . . . 6-9

A. Setting related to process . . . . . . . . . . . . . . . . . . 6-9

B. Toner cartridge settings . . . . . . . . . . . . . . . . . . . 6-10

C. Setting related to fusing . . . . . . . . . . . . . . . . . . . 6-10

D. Paper setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

7. Unpacking and installation of the MX-EFX1 . . . . . . 6-11

8. Automatic developer adjustment . . . . . . . . . . . . . . . 6-12

9. Print test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

10. Distortion adjustment. . . . . . . . . . . . . . . . . . . . . . . . 6-12

11. Attach the document scanning label . . . . . . . . . . . . 6-13

12. Adjuster installation and adjustment . . . . . . . . . . . . 6-13

13. Using the transport handle . . . . . . . . . . . . . . . . . . . 6-13

fineline6

Page 3

[7] MAINTENANCE AND DETAILS OF EACH SECTION

[Maintenance System Table] . . . . . . . . . . . . . . . . . . . . . . .7-1

1. Engine section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1

2. Scanner / DSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2

3. Peripheral devices . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3

[DETAILS OF EACH SECTION] . . . . . . . . . . . . . . . . . . . .7-4

1. Process section . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-4

[OPC drum section] . . . . . . . . . . . . . . . . . . . . . . . . . .7-6

[Transfer section] . . . . . . . . . . . . . . . . . . . . . . . . . . .7-11

[Developing section] . . . . . . . . . . . . . . . . . . . . . . . . .7-16

2. Fusing section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-21

3. Paper feed section . . . . . . . . . . . . . . . . . . . . . . . . . .7-26

4. Transport section/Paper exit reverse section . . . . . .7-33

5. Laser scanner section. . . . . . . . . . . . . . . . . . . . . . . .7-43

6. Scanner section . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-46

7. DSPF section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-54

8. Operation panel section . . . . . . . . . . . . . . . . . . . . . .7-62

9. Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-67

10. Drive section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-68

11. Power section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-70

12. PWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-73

13. Fan motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-75

[8] ADJUSTMENTS

1. Process section . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1

A. Doctor gap adjustment . . . . . . . . . . . . . . . . . . . . .8-1

B. MG roller main pole position adjustment . . . . . . . .8-1

C. High voltage output adjustment. . . . . . . . . . . . . . .8-2

2. Image check, adjustment . . . . . . . . . . . . . . . . . . . . . .8-3

A. Adjustments on the engine side . . . . . . . . . . . . . .8-3

B. Adjustment on the scanner side . . . . . . . . . . . . . .8-6

3. Scanner section . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-10

A. OC scan distortion adjustment

(MB-B rail height adjustment) . . . . . . . . . . . . . . .8-10

B. Vertical image distortion balance adjustment

(Copy lamp unit installing position

adjustment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11

C. Vertical image distortion balance adjustment

(No. 2/3 mirror base unit installing and

position adjustment) . . . . . . . . . . . . . . . . . . . . . .8-11

D. Vertical (sub scanning direction) distortion

adjustment [Winding pulley position

adjustment] . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11

E. Height adjustment of original detection

light emitting unit . . . . . . . . . . . . . . . . . . . . . . . . .8-12

F. Original size detection photo sensor check. . . . .8-12

G. Original size detection photo sensor

adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-12

H. Image density adjustment . . . . . . . . . . . . . . . . . .8-13

I. DSPF width detection adjustment . . . . . . . . . . . .8-17

[9] SIMULATION

1. Outline and purpose . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

2. Code-type simulation. . . . . . . . . . . . . . . . . . . . . . . . . 9-1

A. Operating procedures and operations . . . . . . . . . 9-1

B. Simulation list. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

C. Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7

3. Other related items . . . . . . . . . . . . . . . . . . . . . . . . . 9-86

[10] MACHINE OPERATION

1. Acceptable originals . . . . . . . . . . . . . . . . . . . . . . . . 10-1

A. Size and weight of acceptable originals. . . . . . . 10-1

B. Total number of originals that can be set in the

document feeder tray . . . . . . . . . . . . . . . . . . . . . 10-1

2. Standard original placement orientations . . . . . . . . 10-1

3. Automatic copy image rotation -

rotation copying. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

4. Specifications of paper trays . . . . . . . . . . . . . . . . . . 10-2

A. Applicable plain paper . . . . . . . . . . . . . . . . . . . . 10-2

B. Applicable special paper . . . . . . . . . . . . . . . . . . 10-3

5. Printing onto envelopes. . . . . . . . . . . . . . . . . . . . . . 10-3

A. Fusing unit pressure adjusting levers . . . . . . . . 10-3

6. Printer setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4

A. System settings . . . . . . . . . . . . . . . . . . . . . . . . . 10-4

B. Printer software, firmware diagram . . . . . . . . . . 10-5

C. Configuration report (Test page) . . . . . . . . . . . . 10-6

[11] TROUBLE CODES

1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

2. Trouble codes list . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

3. Details of trouble codes. . . . . . . . . . . . . . . . . . . . . . 11-3

4. Other related items . . . . . . . . . . . . . . . . . . . . . . . . 11-13

[12] ROM VERSION-UP

1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

A. Version-up target ROM's . . . . . . . . . . . . . . . . . . 12-1

B. ROM version-up is required in the

following cases: . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

2. Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

A. Relationship between each ROM and

version-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

3. Necessary items for Flash ROM version-up . . . . . . 12-1

4. Flash ROM version-up method . . . . . . . . . . . . . . . . 12-1

A. Version-up procedure 1 . . . . . . . . . . . . . . . . . . . 12-1

B. Version-up procedure 2 . . . . . . . . . . . . . . . . . . . 12-2

C. Version-up procedure 3 . . . . . . . . . . . . . . . . . . . 12-3

D. Countermeasures against “Result: NG” . . . . . . . 12-4

5. Turning OFF the power during the version-up

procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-4

6. Version-up procedure flowchart . . . . . . . . . . . . . . . 12-4

[13] ELECTRICAL SECTION

1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1

A. System block diagram . . . . . . . . . . . . . . . . . . . . 13-1

2. Actual wiring chart. . . . . . . . . . . . . . . . . . . . . . . . . . 13-2

3. Signal name list . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13

fineline6

Page 4

Revised Edition

PARTS GUIDE

CODE:00ZMXM450N022

デジタル複合機

Digital Multifunctional System

1 外装部 (Exteriors) 2 左ﾄﾞｱﾕﾆｯﾄ (Left door unit) 3 PS ﾛｰﾗｰﾕﾆｯﾄ (PS roller unit) 4 ﾒｲﾝ駆動ﾕﾆｯﾄ (Main drive unit) 5 転写ﾕﾆｯﾄ (Transfer unit) 6 給紙ﾕﾆｯﾄ (Cassette paper feeder) 7 定着ﾕﾆｯﾄ (Fusing unit) 8 排紙反転ﾕﾆｯﾄ (Delivery turn over unit) 9 MC ﾕﾆｯﾄ (MC unit) F ﾌﾟﾛｾｽﾕﾆｯﾄ (Process unit) G DV ﾕﾆｯﾄ (DV unit) H ｺﾝﾄﾛｰﾗｰ BOX ﾕﾆｯﾄ (Controller BOX unit) I 電源ﾕﾆｯﾄ (Power supply unit) J 後ﾌﾚｰﾑ部 1 (Rear frame section 1) K 後ﾌﾚｰﾑ部 2 (Rear frame section 2) L ｶｾｯﾄﾕﾆｯﾄ (Cassette unit)

M 梱包＆付属品

(Packing material & Accessories)

N 外装 (Exteriors)[MX-EFX1/EFX2] O 原稿検知ﾕﾆｯﾄ (Original detect unit)

[MX-EFX1/EFX2]

MODEL

CONTENTS

MX-M350/MX-M350F MX-M350N MX-M350U

(Except Japan)

MX-M450/MX-M450F

(Japan)

MX-M450N MX-M450U

(Except Japan)

MX-EFX1 MX-EFX2 AR-RK2

P 操作部 (Operation panel unit)

[MX-EFX1/EFX2]

Q 光学ﾕﾆｯﾄ 1(Optical unit 1)[MX-EFX1/EFX2] R 光学ﾕﾆｯﾄ 2(Optical unit 2)[MX-EFX1/EFX2] S ﾗﾝﾌﾟﾕﾆｯﾄ (Lamp unit)[MX-EFX1/EFX2]

T DSPF,SPF 組み立て部

(DSPF,SPF Assembly section) [MX-EFX1/EFX2]

U DSPF,SPF 給紙ﾕﾆｯﾄ

(DSPF,SPF Paper feed unit) [MX-EFX1/EFX2])

V DSPF,SPF 上搬送ﾕﾆｯﾄ

(DSPF,SPF Upper transfer unit) [MX-EFX1/EFX2]

W DSPF CIS ﾕﾆｯﾄ (DSPF CIS unit)[MX-EFX1]

X 梱包 & 付属品

(Packing Material & Accessories) [MX-EFX1/EFX2]

Y 梱包 & 付属品

(Packing Material & Accessories)[AR-RK2]

■ 索引 (Index)

(Japan) (Except Japan)

∗ ファックス部に関しては、AR-FX12(00ZARFX12/P1/) を参照して下さい。

Refer to AR-FX12(00ZARFX12/P1/) about FAX section.

∗ 3 段給紙デスク部に関しては、AR-D27(00ZARD27//A1J) を参照して下さい。

本書はサービス活動用に作成した資料です｡一部内容が製品の改良・改善等により予告なしに変わることがあります。

SHARP CORPORAT ION

This document has been pub lished to be used for after sales service only . The contents are subject to change without notice.

Page 5

Update : 2008/06/30

補修部品のランク付

市場における補修部品の在庫管理が、適正に運営出来る手助けとなることを、目的とします。

Aランク : メンテナンスパーツ、メンテナンスパーツには入っていないがメンテナンスパーツに近い消耗パーツ。 Bランク : 性能・機能パーツ（センサー、クラッチ等の電気パーツ）、消耗パーツ。 Eランク : 基板含むユニットパーツ。 Dランク : 整備パーツ（外装、パッキング、同梱パーツ）。 Cランク : 上記ランク以外のパーツ（基板の子部品を除いたもの）。

DEFINITION

Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts Rank E : Unit parts including PWB Rank D : Preparation parts (External fitting, packing, parts packed together) Rank C : Parts other than the above (excluding sub components of PWB)

安全性・信頼性確保のため部品は、必ず正規のものをご使用下さい。 ! 印の商品は、安全上重要な部品です。交換をする時は、安全及び性能維持のため必ず指定の部品をご使用下さい。

Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification.

当モデルのサービス資料には、この資料以外にサービスマニュアル ( 回路図含む ) があります。合わせてご利用下さい。

F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model. F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

外装部 (Exteriors)

NO.

10 11 CCAB-1237FC01 AS EQ N D

13 GCAB-0934FCT2 AX FG D 14 GCAB-1238FCZZ AP EQ N D

15 16 GCAB-1080FCTZ AT EZ D

17 GCAB-0937FCTZ AN EQ D 18 19 PFTA-0139FCZZ AD DJ C

20 GCAB-0939FCT2 AL EB D 21 XHBS740P08000 AA DD C 22 LPLTM5937FCZZ AS EQ C 23 PCOVP1554FCTZ AG DX C 24 PCOVP1618FCZZ AG DX C 25 XHBS730P06000 AC DD C

27 JHNDP0158FCZZ AE DS C 29 TLABH5200FCZZ AB DJ D 30 TLABG5005FCZZ AC DJ D 32 TCAUA1069FCZZ AC DJ D 34 TLABZ5101FCZZ AC DJ D 36 LPLTM6372FCZZ AC DJ C 37 PMAGT0144FCPZ AH DX C 38 XEBS740P14000 AB DD C 39 XEBS730P06000 AA DD C 40 TLABZ5048FCZZ AB DJ D

41 TCAUH1067FCZZ AC DJ D

101 102 TLABS5393FCZZ -ACDJ D

PARTS CODE

1 GCAB-0938FCTZ AY FQ D

LX-BZ0909FCZZ AC DD C

LX-BZ1160FCPZ 1ACDJNC

4 TLABZ5059FCZZ AB DJ D

GCAB-0940FCN3 BA FX D

GCAB-0940FCT3 1BAGDN D HBDGD0051FCZZ AT EZ C HBDGD0058FCZZ 1ATEQNC

XEBS740P10000 AA DD C XEBS740P10000 -AADD C

GCAB-0941FCZ2 -AXFG D GCAB-0941FCZ3 -AXFG D

CBDGD0050FC22 AE DJ N C CBDGD0050FC24 AE DJ N C CBDGD0050FC23 AE DJ N C CBDGD0050FC25 AE DJ N C CBDGD0050FC27 AE DJ N C CBDGD0050FC29 AE DJ N C CBDGD0050FC28 AE DJ N C CBDGD0050FC30 AE DJ N C

XEBS740P08000 -AADD C

Inter-

change

PRICE RANK

Ex. Ja.

NEW

MARK

PART RANK

DESCRIPTION

Right cabinet 右ｷｬﾋﾞ Screw 段ﾋﾞｽ Screw 段ﾋﾞｽ BM Links label [Japan] BM ﾘﾝｸﾗﾍﾞﾙ Paper exit tray cabinet 排紙ﾄﾚｲｷｬﾋﾞ Paper exit tray cabinet 排紙ﾄﾚｲｷｬﾋﾞ Front cabinet bad ge 前ｷｬﾋﾞﾊﾞｯﾁ Front cabinet bad ge 前ｷｬﾋﾞﾊﾞｯﾁ Front cabinet upp er right J 2 前ｷｬﾋﾞ上右 J2 Front cabinet 前ｷｬﾋﾞ Front cabinet upp er JP2 前ｷｬﾋﾞ上 JP2 Screw(4×10) ﾋﾞｽ Screw(4×10) [to No.101] ﾋﾞｽ (4×10) Upper cabinet left 上ｷｬﾋﾞ左 Left cabinet rear 左ｷｬﾋﾞ後 Rear cabinet [J apan,Sou di Arab ia(127V) ] 後ｷｬﾋﾞ Rear cabinet [Except J apan,Sou di Arab ia(127V)] 後ｷｬﾋﾞ Delivery tray cabinet cover 排紙ﾄﾚｲｷｬﾋﾞ蓋 Right cabinet rear 右ｷｬﾋﾞ後 Screw(4×8) ﾋﾞｽ Rear cabinet suppor t plate 後ｷｬﾋﾞ補強板 Harness cover ﾊｰﾈｽｶﾊﾞｰ ROM cover ROM ｶﾊﾞｰ Screw(3×6) ﾋﾞｽ Badge [MX-M350] ﾊﾞｯｼﾞ Badge [MX-M350F] ﾊﾞｯｼﾞ Badge [MX-M350N] ﾊﾞｯｼﾞ Badge [MX-M350U] ﾊﾞｯｼﾞ Badge [MX-M450] ﾊﾞｯｼﾞ Badge [MX-M450F] ﾊﾞｯｼﾞ Badge [MX-M450N] ﾊﾞｯｼﾞ Badge [MX-M450U] ﾊﾞｯｼﾞ Handle R lower 取手 R 下 Plug caution label [Japan] ﾌﾟﾗｸﾞｺｰｼｮﾝﾗﾍﾞﾙ Class 1 label [Japan] ｸﾗｽ 1ﾗﾍﾞﾙ Service cautions label [Except Japan] ｻｰﾋﾞｽ注意ﾗﾍﾞﾙ Class 1 label EGI [Except U.S.A,CAMADA] ｸﾗｽ 1 ﾗﾍﾞﾙ EGI Front cabinet catch plate 前ｷｬﾋﾞｷｬｯﾁ板 Front cabinet mag net 前ｷｬﾋﾞﾏｸﾞﾈｯﾄ Screw(4×14) ﾋﾞｽ Screw(3×6) ﾋﾞｽ WEEE mark label [U.Kingdom,EUROPE] WEEE ﾏｰｸﾗﾍﾞﾙ Connect equipmen t caution label

Screw(4×8) [from No.15] ﾋﾞｽ (4×8) Mercurial component label [English(U.S.A)] 水銀含有ﾗﾍﾞﾙ

[U.Kingdom,EUROPE] 接続機器注意ﾗﾍﾞﾙ

TR No.

08/01 R/C

07/04 R/C

07/09

08/05 mid

1st lot 1st lot

08/05 mid 07/10

Effective

time

– 1 –

Page 6

外装部 (Exteriors)

Update : 2008/06/30

25 25

15(101)

FCP10311

– 2 –