Sharp LC-32SB21U, LC-32SB220U, LC-32SB23U User Manual

LC-32SB23U
LC-32SB220U
LC-32SB21U

LIQUID CRYSTAL
TELEVISION

OPERATION MANUAL

ENGLISH

IMPORTANT : Please read this operation manual before starting operating the equipment.

Supplied Accessories

Make sure the following accessories are provided with the product.

Remote control unit

(g1)

Page 8

Always use the AC cord supplied with the TV.•

To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved
cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD­CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect.

“AA” size battery

(g2)

Page 9

AC cord

(g1)

Page 8

Cable clamp

Page 8

1

(g1)

Stand unit

(g1)

Page 7

Operation manual

(g3 languages)

IMPORTANT:
To aid reporting in case of loss or theft, please record
the TV's model and serial numbers in the space
provided. The numbers are located at the rear of the TV.

Model No.:

Serial No.:

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

The lightning flash with arrow-head
symbol, within an equilateral

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.

PERSONNEL.

triangle, is intended to alert the
user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.

The exclamation point within a
triangle is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
product.

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD,
BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS
PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY
WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY
THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND
USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER.
A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE.
QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user's authority
to operate this equipment.

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances such as radios and televisions, use shielded cables and connectors
for connections.

Printed in Mexico

2

TINS-D834WJZZ

08P08-MX-NM

IMPORTANT INFORMATION

DECLARATION OF CONFORMITY:

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32SB23U/LC-32SB220U/LC-32SB21U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the
National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building, as close to the point of cable entry as practical."

This product utilizes tin-lead solder, and fluorescent lamp
containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities, the Electronic Industries Alliance: www.eiae.org, the
lamp recycling organization: www.lamprecycle.org or
Sharp at 1-800-BE-SHARP (For U.S.A. only)

Trademarks

• Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of

Dolby Laboratories.

• "HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC."

• Products that have earned the ENERGY STAR are designed to protect the environment through superior

energy efficiency.

3

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:

a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualified technician

to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.

4

IMPORTANT SAFETY INSTRUCTIONS

• Outdoor Antenna Grounding — If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may
scratch the panel surface.

• Use a soft damp cloth to gently wipe the panel when it is really dirty.

(It may scratch the panel surface when wiped strongly.)

• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage
the panel surface.

• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifi ers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you fi ne picture details.

Occasionally, a few non-active pixels may appear on the screen as a fi xed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to
the equipment due to lightning and power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• To prevent fi re, never place any type of candle or fl ames on the top or near the TV set.

• To prevent fi re or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• To prevent fi re or shock hazard, do not expose this product to dripping or splashing.

No objects fi lled with liquids, such as vases, should be placed on the product.

• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may
result in fi re or electric shock. Exercise special caution when using the product around children.

Precautions when transporting the TV

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always
carry the TV by two people holding it with two hands — one hand on each side of the TV.

EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA
LEAD IN WIRE

ELECTRIC
SERVICE
EQUIPMENT

GROUND
CLAMP

NEC — NATIONAL ELECTRICAL CODE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING
CONDUCTORS

(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING

ELECTRODE SYSTEM
(NEC ART 250, PART H)

5

IMPORTANT SAFETY INSTRUCTIONS

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

The home theater entertainment experience is a growing trend and larger fl at panel

•
displays are popular purchases. However, fl at panel displays are not always supported
on the proper stands or installed according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves,

•
desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

•

The consumer electronics industry is committed to making home entertainment enjoyable
and safe.

TUNE INTO SAFETY

One size does NOT fi t all. Follow the manufacturer’s recommendations for the safe

•
installation and use of your fl at panel display.
Carefully read and understand all enclosed instructions for proper use of this product.

•
Don’t allow children to climb on or play with furniture and television sets.

•
Don’t place fl at panel displays on furniture that can easily be used as steps, such as

•
a chest of drawers.
Remember that children can become excited while watching a program, especially

•
on a “larger than life” fl at panel display. Care should be taken to place or install the
display where it cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the fl at panel

•
display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT
PANEL DISPLAY, ALWAYS:

Use a mount that has been recommended by the display manufacturer and/or listed

•
by an independent laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.

•
If you have any doubts about your ability to safely install your fl at panel display,

•
contact your retailer about professional installation.
Make sure that the wall where you are mounting the display is appropriate. Some

•
wall mounts are not designed to be mounted to walls with steel studs or old cinder
block construction. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be

•
heavy.

Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.

consumer electronics industry. More than 2,200 companies enjoy the benefi ts of CEA
membership, including legislative advocacy, market research, technical training and education,
industry promotion and the fostering of business and strategic relationships

.

6

QUICK REFERENCE

Attaching/Detaching the Stand

• Before attaching (or detaching) the stand, unplug the AC
cord from the AC INPUT terminal.

• Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being
damaged.

CAUTION

• Attach the stand in the correct direction.

• Do not remove the stand from the TV unless using an

optional wall mount bracket to mount it.

• Be sure to follow the instructions. Incorrect installation

of the stand may result in the TV falling over.

Confi rm that there are 9 screws and a hex key

1

supplied with the stand unit.

Attach the supporting post for the stand unit onto

2

the base using the box for the stand unit as shown
below.

3

Hex key

Screws

2

1

1 Insert the stand into the openings on the bottom

3

of the TV.

2

Insert and tighten the 4 screws into the 4 holes

on the rear of the TV.

2

Hex key

Screws

Setting the TV on the Wall

CAUTION

• This TV should be mounted on the wall only with the
AN-37AG5 (SHARP) wall mount bracket. The use of
other wall mount brackets may result in an unstable
installation and may cause serious injuries.

• Installing the TV requires special skill that should
only be performed by qualifi ed service personnel.
Customers should not attempt to do the work
themselves. SHARP bears no responsibility for
improper mounting or mounting that results in
accident or injury.

Using an optional bracket to mount the TV

You can ask a qualifi ed service professional about

•
using an optional AN-37AG5 bracket to mount the TV
to the wall.

• Carefully read the instructions that come with the
bracket before beginning work.

Hanging on the wall

AN-37AG5 wall mount bracket.
(See the bracket instructions for details.)

Vertical mounting Angular mounting

About setting the TV angle

0/5/10/15/20°

•

The center of the display:

11

/

inch (4.0 mm) under

64

the “A” position.

•

Refer to the operation
manual of AN-37AG5 for
details.

Soft cushion

1

• To detach the stand, perform the steps in reverse order.

• Detach the cable clamp on the rear of the TV when using
the optional mount bracket.

• Due to the terminal confi guration on this TV, when you
wall-mount this model, make sure there is enough space
between the wall and the TV for the cables.

• To use this TV mounted on a wall, fi rst remove the
adhesive tape at the 4 locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket
to secure the bracket to the rear of the TV.

7

QUICK REFERENCE

QUICK INSTALLATION TIPS

Attach your antenna to the back of the television.

1

(See page 9.)

Connect the AC plug for the television into the AC

2

outlet.

Bundle the cords properly with the cable clamp.

3

How to turn on the television for the fi rst time.

4

A) Press POWER on the television.

POWER

AC outlet

• Place the TV close to the AC outlet, and keep the power
plug within reach.

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.

B) The POWER indicator on the front of the

television lights GREEN.

• Speakers cannot be detached from the TV.

• TV angle cannot be adjusted.

POWER
indicator

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may prevent proper operation.

Remote Control sensor

17´ (5 m)

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the television.
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION
STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

30º

30º 30º

30º

Cautions regarding the remote control unit

■

• Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.

• Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.

• The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.

8

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type connector
that can easily be attached to a terminal without tools (Commercially
available).

2. A 300-ohm system is a fl at “twin-lead” cable that can be attached
to a 75-ohm terminal through a 300/75-ohm adapter (Commercially
available).

NOTICE

When connecting the RF cable to the TV set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your TV set. (The breaking
of internal circuit, etc.)

Connecting Antenna

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

Cable without a CATV

1

converter

VHF/UHF antenna

2

Combination VHF/

3

UHF antenna

Separate VHF/UHF

4

antenna

F-type connector should be fi nger-tightened only.

Cable

Cable TV lead-In

75-ohm coaxial cable (round)

75-ohm coaxial cable (round)

300-ohm
twin-lead cable

or

300-ohm twin-lead cable (flat)

UHF
ANTENNA

VHF
ANTENNA

300-ohm twin-lead cable

or

75-ohm coaxial cable

300-ohm twin-lead cable (fl at)

Home Antenna
terminal (75-ohm)

Coaxial cable
(commercially available)

Home Antenna
terminal (75-ohm)

Coaxial cable
(commercially available)

300/75-ohm adapter

(commercially available)

IN OUT

Combiner
(commercially available)

To TV antenna
terminal

F-type connector

75-ohm coaxial cable (round)

F-type connector

75-ohm coaxial cable

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage
in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a
rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

2 Insert two “AA” size batteries

(supplied with the product).

• Place the batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.

9

3 Close the battery cover.

Part Names

TV (Front)

*OPC: Optical Picture Control

TV (Top/Rear)

Remote control sensor
OPC sensor*

OPC indicator
SLEEP indicator
POWER indicator

(See page 18.)

(See page 18.)

(See page 13.)

(See page 12.)

*2

*1 See page 11 for external equipment connection.
*2 See page 17 for button operations.
*3 See page 8 for connecting the AC cord.

Channel buttons

Volume buttons
(VOLl/k)

(CHV/U)

MENU button

INPUT button

*3

AC INPUT terminal

AUDIO OUTPUT terminals

DIGITAL AUDIO OUTPUT terminal

INPUT 6 terminals (PC-IN)

INPUT 5 terminals (HDMI)

INPUT 4 terminal (HDMI)

INPUT 1 terminals

SERVICE terminal
INPUT 2 terminals

Antenna/Cable in
INPUT 3 terminals

POWER button

*1

• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.

• The examples used throughout this manual are based on the LC-32SB23U model.

10

Connecting to External Equipment

You can connect many types of external equipment to your TV like a Blu-ray disc player, DVD player, VCR, Digital
TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source
from INPUT on the remote control unit or on the TV. (See page 15.)

CAUTION

• To protect equipment, always turn off the TV before connecting any external equipment.

• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting a Blu-ray disc player, DVD player, Digital TV STB (Air or Cable), VCR, game console or camcorder

Terminal on the TV

INPUT 1 or 2

AV cable (commercially available)

Cable

Terminal on external

equipment

INPUT 1 or 3

INPUT 2

INPUT 4 or 5

DIGITAL AUDIO
OUTPUT

*1 • The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)
*2 • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.
*3 • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI

connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.

Component video cable (commercially available)

Audio cable (commercially available)

S-VIDEO cable (commercially available)

Audio cable (commercially available)

HDMI-certified cable (commercially available)

Optical fiber cable (commercially available)

Connecting a PC

Terminal on the TV

INPUT 6

INPUT 4 or 5

• The HDMI terminals only support digital signal.

• Refer to page 30 for a list of PC signals compatible with the TV.

RGB cable (commercially available)

Ø 3.5 mm stereo minijack cable (commercially available)

HDMI-certified cable (commercially available)

Cable

Terminal on PC

*1

*2

*3

11

Watching TV

Turning On/Off the Power

Press POWER on the TV or on the remote control unit to turn the
power on.

• POWER indicator (Green): The TV is on. (After a few seconds, a window
appears with sound.)

POWER

POWER

(On/Standby)

Initial Setup

When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.

1. Insert the batteries into the remote control unit. (See page 9.)

2. Connect the antenna cable to the TV. (See page 9.)

3. Plug in the AC cord to the AC outlet. (See page 8.)

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

Press a/b to select the desired language listed on the

1

screen, and then press ENTER.

Language

TV Location

Air/Cable

CH Search

TV Location

Select "Home" or "Store" for the location where you plan to
install the TV.

Press c/d to select "Home" or "Store".

2

Press ENTER to enter the setting.

Language

TV Location

Air/Cable

CH Search

• If you select "Home", AV MODE is set to "STANDARD".

• If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
If there is no operation for 30 minutes, AV MODE will return

to "DYNAMIC (Fixed)" automatically, regardless of previous
changes to the AV MODE settings.

• For changing the TV Location after the setting, see "EZ
Setup" on page 20.

English

Français

Español

Example

Home

• The initial setup starts when the TV powers on for the fi rst time. If the TV has
been turned on before, the initial setup will not be invoked. For changing the
settings of the initial setup, perform EZ setup on the Setup menu on page 20.

Press POWER on the TV or on the remote control unit again to turn the
power off.

• The TV enters standby and the image on the screen disappears.

• The POWER indicator on the TV turns off.

• If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.

• Weak electric power is still consumed even when the TV is turned off.

Store

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".

Press c/d to select "Air" or "Cable".

3

Press ENTER to enter the setting.

Language

TV Location

Air/Cable

CH Search

CH Search (Channel search)

Channel auto search makes the TV look for all channels
viewable in the set area.

When "Air" is selected in Antenna setting:

4

Press c/d to select "Start", and then press ENTER.

Language

TV Location

Air/Cable

CH Search

When "Cable" is selected in Antenna setting:
Press a/b to select "Analog & Digital Search Start" to

search both analog and digital broadcasts, or to select
“Analog Search Start” to search only analog broadcasts,
and then press ENTER.

Language

TV Location

Air/Cable

CH Search

• The Channel search will start automatically.

• To exit the Channel search screen, select "Cancel", and
then press ENTER.

• If no channel is found, confi rm the type of connection made

with your TV and try EZ Setup again.

(See page 20.)

Example

Air

Start

Analog & Digital Search Start

Analog Search Start

Cable

Cancel

Cancel

12

Direct Button Operation

ԝԥ

Ԙ
Ԧ

ԙ

Ԟ
ԧ

ԡ

POWER

You can turn on the TV or put it on standby by
pressing POWER on the TV or on the remote control
unit. (See page 12.)

Changing Channels

You can change channels by pressing CH

• (DOT).

Examples:

To select a 1 or 2-digit channel number (e. g., Channel 5):
Press 5 ENT.
To select a 3-digit channel number (e. g., Channel 115):
Press 1 1 5 ENT.
To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 2 • (DOT) 1 ENT.

•

When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.

•

When you enter 0–9 only, channel selection will be made if
there is no operation within a few seconds.

•

If you push "0" by itself, nothing will happen.

•

Complete the above steps within a few seconds.

•

When you enter 0–9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.

FAVORITE CH

You can select 4 preset favorite channels in 4 different
categories.
Press A, B, C or D.

While watching the TV, you can toggle the selected

•
channels by pressing A, B, C and D.

See page 25 for details of favorite channel settings.

•

ԟ
Ԝ
Ԡ
ԛ

Ԣ
ԣ

Ԥ

Ԛ

r/s

or 0–9,

Changing Volume

You can change the volume by pressing VOLk/l on
the TV or on the remote control unit.

•

To increase the volume, press VOLk.

•

To decrease the volume, press VOLl.

20

Audio status

Output device

Speaker Variable sound Mute

•

When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.

Output Select

Fixed Variable

60

See page 25 for details on the Output Select function.

•

MUTE

Mutes the current sound output.
Press MUTE.

" " will be displayed on the screen for 30 minutes, and

•
the sound is silenced.

Within 30 minutes of pressing MUTE, mute can be

•
canceled by pressing VOL
Mute will be canceled after 30 minutes have passed.

•
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.

k/l

or MUTE.

Sleep Timer

Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.

•

The remaining time displays when the sleep timer has been
set.

•

Each time you press SLEEP, the remaining time switches
as shown below.

Off 30 60 90 120

•

When set, the time automatically starts counting down.

•

If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.

•

When it is 5 minutes before the time expires, the remaining
time will start to keep appearing every minute.

•

Select "Off" by pressing SLEEP to cancel the sleep timer.

•

The TV will enter standby when the remaining time reaches

0.

•

When the sleep timer is set, its indicator on the TV lights
red.

FLASHBACK

Press FLASHBACK to switch to the previously tuned
channel.

•

Press FLASHBACK again to switch back to the currently
tuned channel.

•

FLASHBACK will not work if no channel has been changed

after the TV is turned on.

13

Direct Button Operation

AV MODE

AV MODE gives you several viewing options to choose
from to best match the surrounding environment of the
TV, which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.

Press AV MODE. Current AV MODE displays.

Press AV MODE again before the mode displayed on the

•
screen disappears. The mode changes as shown below:

Example:
When the input source is TV, INPUT 1, 2 or 3 terminals

STANDARD MOVIE GAME USER [TV]

DYNAMIC DYNAMIC (Fixed)

Example:
When the input source is INPUT 4, 5, 6, 7 or 8
terminals

STANDARD MOVIE GAME PC

DYNAMIC DYNAMIC (Fixed) USER[ ]

STANDARD: For a highly defi ned image in a normal

lighting.
[Enhanced Picture Contrast: on]
MOVIE: For a movie.
[Enhanced Picture Contrast: off]
GAME: Lowers image brightness for easier viewing.
[Enhanced Picture Contrast: off]
PC: For PC.
[Enhanced Picture Contrast: off]
USER: Allows the user to customize settings as desired.

You can set the mode for each input source.
[Enhanced Picture Contrast: off]
DYNAMIC (Fixed): Changes the image and sound

settings to the factory preset values. No adjustments

are allowed.
[Enhanced Picture Contrast: on]
DYNAMIC: For a clear-cut image emphasizing high

contrast, useful for sports viewing.

[Enhanced Picture Contrast: on]

You can select a different AV MODE item for each input

•
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
When you play games, "GAME" is recommended for AV

•
MODE.
"Enhanced Picture Contrast" technology detects the source

•
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.

AUDIO

MTS/SAP stereo mode

■

The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.

You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.

•

Stereo broadcasts: View programs like live sporting

events, shows and concerts in dynamic stereo sound.

•

SAP broadcasts: Receive TV broadcasts in either MAIN or

SAP sound. MAIN sound: The normal program soundtrack
(either in mono or stereo). SAP sound: Listen to a second
language, supplementary commentary or other information.
(SAP is mono sound.)

If stereo sound is diffi cult to hear.

•

Obtain a clearer sound by manually switching to fi xed
mono-sound mode.

You can change MTS as shown below to match the television
broadcast signal.

Press AUDIO to toggle between audio modes.

Examples: when receiving MTS and SAP

STEREO mode:
STEREO + SAP mode:

MAIN + SAP mode:
MONO mode: MONO

Digital broadcasting audio mode

■

The types of audio transmitted in a digital broadcast include
SURROUND as well as MONO and STEREO. In addition, it
is possible for multiple audio tracks to accompany a single
video track.

Press AUDIO to toggle between audio modes.

Example: when receiving Digital broadcasting

STEREO (Audio1) STEREO (Audio2)
SURROUND (Audio3)

•

MTS only operates while in TV mode.

STEREO MONO

ST(SAP) SAP(ST) MONO

MAIN SAP

FREEZE

Allows you to capture and freeze a moving image that
you are watching.
Press FREEZE.

•

A moving image is captured.

•

Press FREEZE again to cancel the function.

When this function is not available, "No displaying still

•
image available." will display.
The still image automatically goes out after 30 minutes.

•
If you are using the freeze function and a broadcast

•
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.

14

Direct Button Operation

f

INPUT

To view external source images, select the input
using INPUT on the remote control unit or on the TV.

Press INPUT.

1

A list of selectable sources appears.

•

Press INPUT again or press a/b to select the

2

input source.

•

An image from the selected source automatically
displays.

•

Each time INPUT is pressed, the input source toggles.

•

If the corresponding input is not plugged in, you cannot
change the input. Be sure to connect the equipment
beforehand.

See page 11 for external equipment connection.

•
Press PC to switch to an image from the PC.

•

source

PC

Allows you to gain quick access to PC mode.
Press PC.

Operating On-Screen Display Menu

You can operate the on-screen display menu by using
the following buttons.
MENU: Displays the menu screen.

a/b/c/d

screen.

RETURN: Returns to the previous menu screen.
EXIT: Turns off the menu screen.

•

, ENTER: Select a desired item on the

For operating the on-screen display menu, see “Menu
Operation Buttons” on page 17.

DISPLAY

Displays channel information being viewed.
Press DISPLAY.

Closed Captions and Digital Closed Captions

Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations, narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs and on
some VHS home video tapes at the discretion of the
program provider.

It is a more fl exible system than the original Closed
Caption system, because it allows for a variety
of caption sizes and font styles. When the Digital
Closed Caption service is in use, it will be indicated
by the appearance of a 3-letter abbreviation that also
indicates the language of the Digital Closed Captions:
ENG (English), SPA (Spanish), FRA (French) or other
language codes.

Not all programs and VHS videotapes offer closed
captions. Please look for the “N” symbol to ensure
that captions will be shown.

In the Closed Caption system, there can be more than
one caption service provided. Each is identifi ed by its
own number. The “CC1” and “CC2” services display
subtitles of TV programs superimposed over the
program's picture.

In the Closed Caption system, the “Text1” or “Text2”
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.

Press CC.

1

This will present the Closed Caption information display.

•

Press CC while the Closed Caption information is

2

still on the screen.

•

Press repeatedly until you select the desired closed
caption service.

Air ANALOG

2

Audio : MONO

CC : 1/2 CC1

Ratings : NONE

Example:

If a program has three services (Digital CC(ENG), CC1
and Text1), the closed caption display will toggle in this
sequence:

1/3 ENG Of

2/3 CC1 3/3 Text1

•

The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g. “1/3(CC1)”.
Closed Caption services that appear in parentheses will
not be stored in the CC button's memory as your last
selected service. Only services that you have selected
with the CC button are stored.

•

See page 25 for detailed closed caption settings.

•

When the program contains no closed caption, “--” displays
in the closed caption information.

•

If the language code, e.g. “ENG”, is not found on Digital TV
programs, “--” will be shown.

•

Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may contain
none or only some of these services at the discretion of the
program provider.

Closed Caption
information

15

Direct Button Operation

VIEW MODE

You can select the screen size.

Press VIEW MODE.

1

The View Mode menu displays.

•
The menu lists the View Mode options selectable for the type of video signal currently being received.

•

Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu.

2

•

You can sequentially select a View Mode that has its own aspect ratio.

For 4:3 programs

■

Example: Screen size images

Side Bar S.Stretch (Smart stretch) Zoom Stretch

Suitable for viewing
conventional 4:3 programs in
their normal format.

For HD programs

■

Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at

the top and bottom of the screen.

Full Screen: Displays an image faithful to the input signal in full screen.
S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to fi ll the screen.
Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.

•

When using Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please change view
mode to correct this.

For PC input mode

■

•

Connect the PC before making adjustments. (See page 11.)

•

Selectable screen size may vary with input signal type.

Example: Screen size images

Input signal Normal Zoom Stretch Dot by Dot

4:3

Input signal Stretch Dot by Dot

16:9 An image fully fi lls the

Suitable for stretching 4:3
programs to fi ll the screen.

Keeps the original
aspect ratio in a full
screen display.

screen.

Suitable for viewing wide­screen 2.35:1 anamorphic
DVDs in full screen.

For viewing
widescreen
programs. The top
and bottom of the
image is cropped.

Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.

This mode is useful for 1.78:1
DVDs. When viewing 1.85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.

An image fully fi lls the
screen.

Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.

16

On-Screen Display Menu

On-Screen Display Menu Operation

Example

Picture

OPC

Backlight [b12] a16

Contrast

Brightness

Color

Tint

Sharpness

Advanced

Reset

ENTER

: Select : Enter

The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.

Press c/d to select the desired item.

1

Press a/b to select the desired item.

2

Press c/d to adjust the item.

3

[b30]

[ 0]

[ 0]

[ 0]

[ b2]

RETURN

Off On

0

a30

a30

a30

a10

: Back

On : Display

b16

b40

b30

b30

b30

b10

MENU

: Exit

Example

Option

Audio Only

Output select [Fixed]

Caption Setup

Digital Caption Info.

Favorite CH

Item displayed in yellow

1

• This indicates the item currently selected.

• Press ENTER to go to the adjustment screen for this
item.

Item in brackets

2

• This indicates the current setting for the item.

Item displayed in white

3

• This indicates that the item can be selected.

Item displayed in gray

4

• This indicates that the item cannot be selected.

There are various reasons why the items cannot be

selected, but the main reasons are as follows:

—Nothing is connected to the selected input terminal.
—The function is not compatible with the current input

signal.

Menu options differ in the selected input modes, but the

•
operating procedures are the same.
The screens in the operation manual are for explanation

•
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.

[No]Program Title Display

[Off]Operation Lock Out

Menu Operation Buttons

Using the remote control

Use the following buttons on the remote control to
operate the menu.

MENU: Press to open or close the menu screen.

: Press to select a desired item on the screen or

a/b/c/d

ENTER: Press to go to the next step or complete the

RETURN: Press to return to the previous step.

adjust a selected item.

setting.

Using the control panel of the main unit

You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.

VOL

: Cursor c/d on the remote control.

l/k

CHs/r: Cursor b/a on the remote control.

INPUT: ENTER on the remote control.

MENU: MENU on the remote control.

17

On-Screen Display Menu

Picture Menu

Adjusts the picture to your preference with the
following picture settings.

Example

Press MENU to display the MENU screen, and then

1

Press a/b to select a specifi c adjustment item.

2

Press a/b(or c/d) to select the desired setting,

3

Press MENU to exit.

4

Selected item

Backlight The screen dims The screen

Contrast For less contrast For more contrast
Brightness For less

Color For less color

Tint Skin tones

Sharpness For less

For resetting all Picture adjustment items to the factory

•
preset values, press a/b to select "Reset", press ENTER,
press c/d to select "Yes", and then press ENTER.

Picture

OPC

Backlight [b12] a16

Contrast

Brightness

Color

Tint

Sharpness

Advanced

Reset

[b30]

[ 0]

[ 0]

[ 0]

[ b2]

Off On

0

a30

a30

a30

a10

On : Display

b16

b40

b30

b30

b30

b10

press c/d to select "Picture".

•

Select "Advanced" and then press ENTER to set
"C.M.S. -Hue", "C.M.S.-Saturation", "Color Temp.",
"Active Contrast", "Film Mode", "Digital Noise
Reduction", "3D-Y/C", "Monochrome" or "Range of
OPC".

and then press ENTER.

button

c

brightness

intensity

become reddish

sharpness

button

d

brightens

For more
brightness
For more color
intensity
Skin tones
become greenish
For more
sharpness

OPC Setting

Automatically adjusts the brightness of the screen.

Off: The brightness is fi xed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while

adjusting the brightness of the screen.

•

When set to "On", the Optical Picture Control (OPC) senses
the surrounding light and automatically adjusts the backlight
brightness. Make surenothing obstructs the OPC sensor,
which could affect its ability to sense surrounding light.

•

When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.

•

When set to "On" or "On: Display", the OPC indicator on
the TV lights green.

Advanced Picture Setting

This TV provides various advanced functions for
optimizing the picture quality.

C.M.S.
(Color Management System)

Color tone is managed using the six-color adjustment
setting.

C.M.S.-Hue: This is a standard to adjust the color either

more reddish or more bluish in tone.

C.M.S.-Saturation: Increases or decreases the

saturation of a selected color.

•

For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press

ENTER.

Color Temp.
(Color Temperature)

For a better white balance, use color temperature
correction.

High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone

Active Contrast

Automatically adjusts the image contrast according to
the scene.

On: Automatically adjusts the image contrast.
Off: No adjustment.



18

On-Screen Display Menu

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still fi lm frame for high-defi nition picture
quality.

On: Detects, analyzes, converts fi lm source.
Off: Normal viewing mode.

"Film Mode" does not function when you set the "AV Mode"

•
to "Game".
"Film Mode" is not selectable when channel display shows

•
an input resolution of 480p or 720p.

Digital Noise Reduction

Produces a clearer video image.

Off: No adjustment
High: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction

3D-Y/C

Provides high quality images with minimal dot crawl
and cross color noise.

Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off (2D): For Game Mode.

3D-Y/C is available for input signal from Composite Video

•
and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome.
Off: Normal color.

Range of OPC

The brightness level range of the OPC sensor's
automaticadjustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be set to
amaximum of +16 and a minimum of –16.

Max.: –15 through +16
Min.: –16 through +15

The range of OPC settings are active only when the OPC is

•
set to "On".
The maximum setting cannot be set to a smaller number

•
than the minimum setting.
The minimum setting cannot be set to a bigger number

•
than the maximum setting.
Depending on the brightness of the surrounding light, the

•
OPC sensor might not operate if the adjustment range is
small.

Audio Menu

You can adjust the sound quality to your preference
with thefollowing settings.

Example

Press MENU to display the MENU screen, and then

1

press c/d to select "Audio".

Press a/b to select a specifi c adjustment item.

2

•

Press a/b (or c/d) to select the desired setting,

3

and then press ENTER.

Press MENU to exit.

4

Selected item

Treble For weaker treble For stronger treble

Bass For weaker bass For stronger bass

Balance

•

Audio menu is grayed out when Output Select is set to
"Variable". (See page 25.)

•

For resetting all Audio adjustment items to the factory
preset values, press a/b to select "Reset", press ENTER,
press c/d to select "Yes", and then press ENTER.

Surround

Surround function allows you to enjoy realistic "live" sound.

•

Audio menu is grayed out when Output Select is set to
"Variable". (See page 25.)

•

For some discs, setup may be required on your DVD player.
In this case, please refer to the operation manual of your
DVD player.

Bass Enhancer

This function allows you to enjoy bass-enhanced sound.

Audio menu is grayed out when Output Select is set to

•
"Variable". (See page 25.)

Audio

Treble

[ 0]

a15

[ 0]

Bass

Balance

Surround

Bass Enhancer

Reset

Select "Surround" or "Bass Enhancer" and then press

ENTER to set each item.

On: Surround function is on.
Off: Normal sound.

On: Bass Enhancer function is on.
Off: Normal sound.

a15

[ 0]

L

button

c

Decrease audio from
the right speaker

b15

b15

R

[Off]

[On]

button

d

Decrease audio from
the left speaker

19

On-Screen Display Menu

Power Control Menu

Power control setting allows you to save energy.

Example

Press MENU to display the MENU screen, and then

1

press c/d to select "Power Control".

Press a/b to select a "No Signal Off" or "No

2

Operation Off", and then press ENTER.

Press c/d to select "Enable", and then press

3

ENTER.

Press MENU to exit.

4

Power Control

No Signal Off

No Operation Off

[Disable]

[Disable]

No Signal Off

When set to"Enable", the power will automatically shut
down if there is no signal for 15 minutes.

When it is 5 minutes before the power shuts down, the

•
remaining time will start to keep appearing every minute.
"Disable" is the factory preset value.

•
When a TV program fi nishes, this function may not operate.

•

No Operation Off

When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.

•

When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.

•

"Disable" is the factory preset value.

Setup Menu

Example

Press MENU to display the MENU screen, and then

1

press c/d to select "Setup".

Press a/b to select a specifi c adjustment item,

2

and then press ENTER.

•

Press a/b (or c/d) to select the desired setting,

3

and then press ENTER.

Press MENU to exit.

4

Setup

EZ Setup

CH Setup

Antenna Setup-DIGITAL

Input Skip

Parental CTRL

Position

Language

Reset

When you select "EZ Setup", "CH Setup", "Parental
CTRL" and "Reset", you can enter the 4-digit secret
number here. See page 22 for setting a secret number.

[English]

EZ Setup

You can run EZ Setup again, even after setting up the
preset channels.

Language: Select from among 3 languages (English,

French and Spanish).

TV Location: Select "Home" or "Store" for the location

where you plan to install the TV.

•

If you select "Home", AV MODE is set to "STANDARD".

•

If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
If there is no operation for 30 minutes, AV MODE will return
to "DYNAMIC (Fixed)" automatically, regardless of previous
changes to the AV MODE settings.

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

See "Initial Setup" on page 12 for setting each item.

•
If no channel is found, confi rm the type of connection made

•
with your TV and try EZ Setup again.
If you select "Analog Search Start" and initiate the channel

•
search, the CH Memory for Cable Digital will be deleted.

CH Setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

CH Memory: You can select the channels to skip in each

ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).

On: Skips channels. (Channel selection disabled using CH

.)

r/s

Off: Does not skip channels. (Channel selection enabled using

CHr/s.)

See "Initial Setup" on page 12 for setting each item.

•
If no channel is found, confi rm the type of connection made

•
with your TV and try channel search again.
If you select "Analog Search Start" and initiate the channel

•
search, the CH Memory for Cable Digital will be deleted.

Antenna Setup - DIGITAL

In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confi rm the
antenna confi guration through the "Antenna Setup ­DIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL channel

is displayed. The signal information is based on the
current channel.

Channel Strength: Input the 2-digit channel number

to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
channel.

This function is available for DIGITAL (Air) only.

•

20

On-Screen Display Menu

Input Skip

This setting allows you to skip the HDMI or PC-IN Input
("Input 4 (HDMI)", "Input 5 (HDMI)" and "Input 6 (RGB)")
on the Input Selection operation.

Yes: Skips the input.
No: Does not skip input.

Input Signal (for Analog PC Input Mode Only)

Some input signals may have to be registered manually
to display properly. The pair of input signals (resolutions)
in the list below is not distinguishable when received.
In such a case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.

1024 x 768 1360 x 768

You can only select the "Input Signal" on the Setup menu

•
when receiving one of the 2 input signals listed above.

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image."

displays.

No: This function does not work.

•

When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.

•

Auto Sync. may fail even if "Completed" displays.

•

Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.

•

Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.

Fine Sync.

Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.

H-Pos.: Centers the image by moving it to the left or

right.

V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image fl ickers with vertical

stripes.

Phase: Adjust when characters have low contrast or

when the image fl ickers.

For resetting all Fine Sync. adjustment items to the factory

•
preset values, press a/b to select "Reset", and then press
ENTER.
It is not necessary to adjust the "Clock" or "Phase" when a

•
digital signal is being input, so it cannot be selected.
The default cursor position may not be in the center,

•
because the screen position variable ranges may be
asymmetrical.
The screen position variable ranges depend on the View

•
Mode or the signal type. The ranges can be seen on the
position-setting screen.

Input Label

Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press

a/b/c/d

mode.

•

to select the new name for the input

You cannot change labels if the INPUT SOURCE is TV.

Position

For adjusting a picture's horizontal and vertical
position.

H-Pos.: Centers the image by moving it to the left or

right.

V-Pos.: Centers the image by moving it up or down.

•

For resetting adjustments to the factory preset values,
press a/b to select "Reset", and then press ENTER.

•

When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.

•

The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.

•

Adjustments are stored separately according to input
source.

Language

You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.

Reset

If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.

"Return to the factory preset values" displays on the

1

screen.

•

If you have already set the Secret No., input the 4-digit
secret number here. See page 22 for setting a secret
number.

Select "Yes".

2

•

"Now, TV will restart automatically. OK?" displays on
the screen.

Select "Yes".

3

•

"Now initializing..." displays on the screen and blinks.
After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings.

The Channel Setup settings will not be changed.

•
The Language settings will not be changed.

•
The Secret number settings will not be changed.

•
The TV Location Settings will not be changed.

•

21

On-Screen Display Menu

Parental CTRL (Parental Control Setting)

Secret No.

Allows you to use a secret number to protect certain
settings from being accidentally changed.

IMPORTANT:

Three conditions must be met to enable the V-Chip (see
pages 22 to 24):

1.

Secret No. is registered.

2.

V-Chip/V-Chip (DTV Only) settings have been made.

The “V-Chip (DTV Only)” will only be selectable when

•
a new rating system can be downloaded via digital
broadcasting in the U.S.

3. "

Status" is set to "On".

New Secret No.

■

You can set and change the secret number by using 0–9.

Input Secret No.: When you change the secret number,

enter the old 4-digit secret number here. The cursor
moves to "New Secret No.".

New Secret No.: When you set the new secret number,

enter the new 4-digit secret number here. The cursor
moves to "Reconfi rm".

Reconfi rm: Enter the same 4-digit number you set in

"New Secret No.".

Secret No. Clear

■

You can clear your secret number.

Yes: Your secret number is cleared.
No: Your secret number is not cleared.

As a precautionary measure, make a note of your secret

•
number and keep it in a familiar place.
If the secret number is cleared, the Status setting

•
automatically sets to "Off". "V-Chip" and "Status" will not be
selectable from the menu.

Status

Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not fi rst confi gure your secret number.

On: Enables Parental CTRL
Off: Disables Parental CTRL.

V-Chip

V-CHIP is an electronic fi ltering device built into your
TV. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It
does so automatically once you activate the V-CHIP
feature in your TV. "V-Chip" and "Status" will not be
selectable from the menu if you do not fi rst confi gure
your secret number.

The U.S. has two rating systems for viewing content: TV

•
Parental Guidelines and movie ratings.
The TV Parental Guidelines work in conjunction with the

•
V-CHIP to help parents screen out inappropriate television
shows from their children.
Movie ratings are used for original movies rated by the

•
Motion Picture Association of America (MPAA) as watched
on cable TV and not edited for television. The V-CHIP can
also be set to block MPAA-rated movies.

The setting automatically enters "Block" for any ratings

•
below your selection.
If Status is not set to "On", the confi guration settings will

•
not work.

MPAA (Voluntary movie rating system)

■

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

Press a/b to adjust the item to your desired position.
"

" indicates the item is blocked. Press MENU to exit.

G: General audiences. All ages admitted.
PG: Parental guidance suggested. Some material may not be

suitable for children.

PG-13: Parents strongly cautioned. Some material may be

inappropriate for children under 13.

R: Restricted. Under 17 requires accompanying parent or

adult guardian (age varies in some jurisdictions).

NC-17: No one 17 and under admitted.
X: X is an older rating that is unifi ed with NC-17 but may be

encoded in the data of older movies.

Voluntary movie rating system only uses an age-based

•

rating.

G

PG

PG-13

R

NC-17

X

NONE

22

On-Screen Display Menu

TV Parental Guidelines

■

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

Pressa/b to adjust the item to your desired position.
"

" indicates the item is blocked. Press MENU to exit.

Suggested age

TV-Y: All children.
TV-Y7: Directed to older children.
TV-G: General audience.
TV-PG: Parental Guidance suggested.
TV-14: Parents strongly cautioned.
TV-MA: Mature audience only.

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

When setting an individual content-based rating item:

Press d or ENTER to access blocked content

1

items from the currently selected age-based rating
item.

Pressa/b to select an individual item, and then

2

press ENTER to unblock it ("
the same steps for the other items.

Press c or RETURN to register after all individual

3

content rating items are set.

Content

FV: Fantasy violence.
V: Violence.
S: Sexual situation.
L: Adult language.
D: Sexually suggestive dialog.

Rating

TV-Y

D

TV-Y7

TV-G

L

TV-PG

S

TV-14

V

FV

TV-MA

NONE

TV-Y

D

TV-Y7

L

TV-G

S

TV-PG

V

TV-14

FV

TV-MA

NONE

" is removed). Repeat

Content

FV V S L

D

TV-Y

TV-Y7

Suggested
age

TV-G



TV-PG

TV-14

TV-MA

: The content rating can be set, but this rating is not

normally broadcast by TV stations.

: Content rating can be set.

23

Canadian Rating Systems (Canadian English ratings
and Canadian French ratings)

The TV rating systems in Canada are based on the

•

Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television
programming.
While violence is the most important content element to

•

be rated, the structure developed takes into consideration
other program content like language, nudity, sexuality and
mature themes.
When setting the V-CHIP on the Canadian system you can

•

choose either the Canadian English ratings or the Canadian
French ratings.

Canadian English Ratings

■

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

Press a/b to adjust the item to your desired position.

" indicates the item is blocked. Press MENU to exit.

"

E: Exempt: Includes news, sports, documentaries and other

information programming; talk shows, music videos, and
variety programming.

C: Children: Intended for younger children under the age of 8

years. Pays careful attention to themes that could threaten
their sense of security and well-being.

C8+: Children over 8 years old: Contains no portrayal

of violence as the preferred, acceptable, or only way
to resolve confl ict; nor encourage children to imitate
dangerous acts which they may see on the screen.

G: General: Considered acceptable for all age groups.

Appropriate viewing for the entire family, contains very little
violence, physical, verbal or emotional.

PG: Parental Guidance: Intended for a general audience, but

may not be suitable for younger children (under the age of 8)
because it could contain controversial themes or issues.

14+: Over 14 years: Could contain themes where violence

is one of the dominant elements of the storyline, but it
must be integral to the development of plot or character.
Language usage could be profane and nudity present
within the context of the theme.

18+: Adults: Intended for viewers 18 years and older and

might contain depictions of violence, which while related to
the development of plot, character or themes, are intended
for adult viewing. Could contain graphic language and
portrayals of sex and nudity.

Example

E

C

C8+

G

PG

14+

18+

NONE

On-Screen Display Menu

Canadian French Ratings

■

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

Press a/b to adjust the item to your desired position.
"

" indicates the item is blocked. Press MENU to exit.

E: Exempt programming.
G: General: All ages and children, contains minimal direct

violence, but may be integrated into the plot in a humorous
or unrealistic manner.

8ans+: General but inadvisable for young children: May

be viewed by a wide public audience, but could contain
scenes disturbing to children under 8 who cannot

distinguish between imaginary and real situations.
Recommended for viewing with parent.
13ans+: Over 13 years: Could contain scenes of frequent

violent scenes and therefore recommended for viewing with

parent.
16ans+: Over 16 years: Could contain frequent violent scenes

and intense violence.
18ans+: Over 18 years: Only for adult viewing. Could contain

frequent violent scenes and extreme violence.

How to temporarily release the V-CHIP BLOCK

■

When the V-CHIP BLOCK is working and censors a
broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.

Press ENTER while the V-CHIP is working, and

1

then the secret number setting menu displays.

Input the 4-digit secret number by using 0–9. At this

2

time V-CHIP BLOCK temporarily releases.

Reactivating the temporarily released V-CHIP

■

BLOCK

You can reactivate the temporarily released V-CHIP
BLOCK as shown below.

•

Select "Status" setting from the Parental CTRL menu to
reactivate BLOCK. (See page 22.)

•

Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 22 to 24.)
Switch off the TV power.

•

Performing any of the three above will activate the V-CHIP

•

BLOCK.

Example

E

G

8ans+

13ans+

16ans+

18ans+

NONE

Option Menu

Example

Press MENU to display the MENU screen, and then

1

press c/d to select "Option".

Press a/b to select a specifi c adjustment item and

2

then press ENTER.

Press a/b (or c/d) to select the desired setting,

3

and then press ENTER.

Press MENU to exit.

4

Skip this step for "Audio Only".

Audio Only

When listening to music from a music program, you
can turn the screen off and enjoy audio only.

On: Audio is output without screen image.
Off: Both screen images and audio are output.

•

The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,

AUDIO) is pressed.

Game Play Time

This function displays the elapsed game time so you
do not lose track of the time. To display the elapsed
time, select "GAME" for the AV MODE before starting
the game.

On: The elapsed time is displayed every 30 minutes when

Off: No adjustment.

Operation Lock Out

This function locks the operation buttons on the TV
and the remote control.

Off: No adjustment.
RC Control Lock: All buttons on the remote control are

Button Control Lock: All buttons on the TV, except

To unlock the buttons on the remote control, press MENU

•
on the TV, and then select "Off" on the MENU screen.
To unlock the buttons on the TV, press MENU on the

•
remote control, and then select "Off" on the MENU screen.

Option

Audio Only

Output Select

Caption Setup

Digital Caption Info.

Program Title Display

Favorite CH

Game Play Time

Operation Lock Out

you switch to GAME mode in external input mode.

locked.

POWER, are locked.

[Fixed]

[No]

[Off]

[Off]

24

On-Screen Display Menu

Input Select

If the image does not come in clearly from the external
equipment connected to INPUT 1, you may need to
change the input signal type setting from the list below:

Auto/COMPONENT/VIDEO

If the selected signal type is incorrect, images are not

•
displayed at all or are displayed without any color.
Refer to your external equipment operation manual for the

•
signal type.
If you set INPUT 1 to Auto, the TV will automatically select

•
the input signal.
Setting INPUT 1 signal selection to "Auto" when other

•
equipment is connected will result in the following
connection priority.

INPUT 1:

1 COMPONENT VIDEO
2 VIDEO

HDMI Setup

To watch an HDMI or PC-IN equipment image, select
"INPUT4" or "INPUT5" from "INPUT SOURCE" menu
using INPUT on the remote control unit or on the TV.

Auto View:

Enable: To use View Mode based on signal

recognition, including an HDMI signal.

Disable: No function.

Audio Select:

Digital: For an audio signal via the HDMI terminal.
Analog: For an audio signal via the R-AUDIO -L

terminal.

•

Refer to your external equipment operation manual for the
signal type.

•

"Audio Select" is only available for INPUT 5.

•

When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.

Output Select

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOL

the remote control unit or VOL

Sound via the AUDIO OUTPUT terminal is not

adjustable and outputs at a consistent level.

Variable: Sound via the AUDIO OUTPUT terminal is

adjusted with VOL

VOL

l/k

Sound via speaker is muted.

k/l

on the TV.

on the TV.

l/k

on the remote control unit or

k/l

on

Color System

Select the video signal system compatible with your
equipment from the list below:

Auto/NTSC/PAL-M/PAL-N

•

"Color System" can only be set for the INPUT 1 VIDEO and
INPUT 2.

•

If you have already set the Secret No., input the 4-digit
secret number here. See page 22 for setting a secret
number.

Caption Setup

This function allows you to adjust the closed
caption screen appearance to suit your preference.
You can adjust 7 items: "Caption Size", "Font
Style", "Foreground Color", "Foreground Opacity",
"Background Color", "Background Opacity" and
"Character Edge".

Example:

Selectable items available for "Font Style".

Default: The font specifi ed by broadcasting station or

default font.

Type 0: Proportional font used in the MENU screen.
Type 1: Monospaced with serifs.
Type 2: Proportionally spaced with serifs.
Type 3: Monospaced without serifs.
Type 4: Proportionally spaced without serifs.
Type 5: Casual font type.
Type 6: Cursive font type.
Type 7: Small capitals.

For resetting adjustments to the factory preset values,

•
press a/b to select "Reset", and then press ENTER.
The default value depends on the broadcasting station.

•

Digital Caption Info. (Digital Caption Information)

This function allows viewing of digital closed caption
information for the digital broadcast program being
viewed.

•

This list is not displayed for analog broadcasts or external
input audio/video.

•

This information is not included in CC1, CC2, Text1, or
Text2, and is not displayed in a list.

Program Title Display

Select the CH display when changing channels for
digital broadcasting.

Yes: "Program Info." displays.
No: "Program Info." does not display.

Favorite CH (Favorite Channel Setting)

This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.

To register your favorite channel:

Select "Register" and then press ENTER. Press a/b/c/

to select the position in the category, and then press

d

ENTER to register.

To delete your favorite channel:

Select "1 Data Clear" and then press ENTER. Press

to select the channel you want to delete, and

a/b/c/d

then press ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".

Before setting the channel, select the channel you want to

•
register as a favorite channel.

25

On-Screen Display Menu

Digital Setup

This setting allows you to optimize the settings of
Digital broadcasting.

Example

Press MENU to display the MENU screen, and then

1

press c/d to select "Digital Setup".

Press a/b to select a specifi c adjustment item,

2

and then press ENTER.

Press a/b (or c/d) to select the desired setting,

3

and then press ENTER.

Press MENU to exit.

4

Audio Setup

You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.

Identifi cation

The current version of the TV software is displayed.

Digital Setup

Audio Setup

Identification

Software Update

PCM: The optical output terminal outputs audio signal

in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".

Dolby Digital: The optical output terminal outputs audio

signal in Dolby Digital form. It reproduces sound from
surround program of digital.

[PCM]

Software Update

This function allows software updates by inserting
a USB memory device with the update fi le into the
SERVICE terminal on the TV.
To check for the availability of a software update, visit
www.sharpusa.com. If you have any questions, please
call 1-800-BE-SHARP (800-237-4277).

CAUTION

Do not remove the USB memory device or unplug the

•
AC cord while the software is being updated.
Be sure to properly follow the whole procedure

•
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail.

Insert the USB memory device with the update fi le

1

into the SERVICE terminal on the TV.

Press MENU to display the MENU screen, and then

2

press c/d to select “Digital Setup”.

Press a/b to select “Software Update”, and then

3

press ENTER.

If you have already set the Secret No., go to step 4.

•

Digital Setup

Audio Setup

Identification

Software Update

Input the 4-digit secret number by using 0–9.

4

Digital Setup

Secret No.

Press ENTER to start checking the data in the USB

5

memory device.

Insert the USB memory device containing

the software update file.

[PCM]

aaaa

OK

26

On-Screen Display Menu

During the data checking, “Checking” blinks.

6

Now checking the data in the USB memory device.

Checking

The current version of the TV software and the version

•
of the update fi le on the USB memory device are
displayed. To update the TV software with the update
fi le, select “Yes”, and then press ENTER.

Example

Software update file is detected

in the USB memory device.

Start update?

Current Version: UXXXXXX1
Update Version: UXXXXXX2

Yes

If the USB memory device is not properly installed or

•
the correct update fi le cannot be found on the USB
memory device, an error message is displayed.
Check the fi le on the USB memory device, and then

•
reinsert the USB memory device correctly.

Software update file is not detected

in the USB memory device.

Confirm that you have transferred the file

to the USB memory device and retry software update.

OK

There is more than one software file

in the USB memory device.

Confirm that only the software update file is

in the USB memory device.

OK

No

Press ENTER to start updating.

7

The screen becomes dark for a while until the update

•
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.

The picture will temporarily go dark until

the Software Update display appears.

Wait several minutes and do not unplug the AC cord.

OK

Example

Now updating

Do not unplug AC cord.

Update Version UXXXXXX2

30%

CAUTION

Do not remove the USB memory device or unplug the

•
AC cord while the software is being updated.

When the software is successfully updated, a

8

screen is displayed indicating that the update
process is completed.

After this screen is displayed, the TV automatically
turns off and then turns on again.

Example

Software update is complete.

Update Version UXXXXXX2

If the update has failed, check the fi le in the USB

•
memory device and try Software Update again.

Failed to complete update.
Retry Software Update.
If system Update fails again,
contact the customer service center.

After the screen shown below is displayed, press

9

ENTER.

System software was
successfully updated.

Remove the USB memory device.

OK

Remove the USB memory device.

10

27

Appendix

Troubleshooting

Problem

• No power

• Unit cannot be operated.

• Remote control unit does not
operate.

• Picture is cut off/with sidebar
screen.

• Strange color, light color, or color
misalignment

• Power is suddenly turned off.

• No picture

• No sound

• The TV sometimes makes a
cracking sound.

Possible Solution

• Check if you pressed POWER on the remote control unit. (See page 12.) If the
indicator on the TV does not light up, press POWER on the TV.

• Is the AC cord disconnected? (See page 8.)

• Has the power been turned on? (See page 12.)

• External infl uences such as lightning, static electricity, may cause improper operation.
In this case, operate the unit after fi rst turning off the power of the TV or unplugging
the AC cord and replugging it in after 1 or 2 minutes.

• Are batteries inserted with polarity (e, f) aligned? (See page 9.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fl uorescent lighting?

• Is a fl uorescent light illuminated near the remote control sensor?

• Is the image position correct? (See page 21.)

• Are screen mode adjustments such as picture size made correctly? (See page 16.)

• Adjust the picture tone. (See pages 18 and 19.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the input signal setting. (See page 21.)

• Is the sleep timer set? (See page 13.)

• Check the power control settings. (See page 20.)

• The unit's internal temperature has increased. Remove any objects blocking vent or
clean.

• Is connection to other components correct? (See page 11.)

• Is correct input signal source selected after connection? (See page 25.)

• Is the correct input selected? (See page 25.)

• Is picture adjustment correct? (See pages 18 and 19.)

• Is “On” selected in “Audio Only”? (See page 24.)

• Is a non-compatible signal being input? (See page 30.)

• Is the volume too low? (See page 13.)

• Is “Variable” selected in “Output Select”? (See page 25.)

• Have you pressed MUTE on the remote control unit? (See page 13.)

• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.

Troubleshooting-Digital Broadcasting

The error message about reception of broadcast

The example of an error message

displayed on a screen

• Failed to receive broadcast.

• No broadcast now.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: f4°F to e140°F (f20°C to e60°C)

Error code

E202

E203 • Check the broadcast time in the program guide.

• Check the antenna cable. Check that the antenna is correctly
setup.

Possible Solution

28

Appendix

Specifi cations

Item Model: LC-32SB23U/LC-32SB220U/LC-32SB21U

LCD panel

32o Class (31
Advanced Super View & BLACK TFT LCD

Resolution 1,049,088 pixels (1,366 g 768)

TV-standard (CCIR) American TV Standard ATSC/NTSC System

VHF/UHF VHF 2-13ch, UHF 14-69ch

CATV 1-135ch (non-scrambled channel only)

TV
Function

Receiving
Channel

Digital Terrestrial
Broadcast (8VSB)

Digital cable*1
(64/256 QAM)

2-69ch

1-135ch (non-scrambled channel only)

Audio multiplex BTSC System

Backlight 60,000 hours (at Backlight Standard position)

Audio out 10W g 2

INPUT 1 AV in, COMPONENT in

INPUT 2 AV in, S-VIDEO in

INPUT 3 COMPONENT in

INPUT 4 HDMI in with HDCP

Terminals Rear

INPUT 5 Audio in, HDMI in with HDCP

INPUT 6 15-pin mini D-sub female connector, Audio in (Ø 3.5 mm jack)

ANT/CABLE 75 q Unbalance, F Type g 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)

DIGITAL AUDIO OUTPUT

Optical Digital audio output g 1 (PCM/Dolby Digital)

OUTPUT Audio out

SERVICE Software update

OSD language English/French/Spanish

Power Requirement AC 120 V, 60 Hz

Power Consumption 135 W (0.3 W Standby with AC 120V)

Weight

Dimension
(W g H g D)

Operating temperature

TV + stand 29.8 lbs./13.5 kg

TV only 25.4 lbs./11.5 kg

*2

TV + stand 30

TV only 30

e

1

Diagonal)

/

o

2

9

/16 g 22 41/64 g 9 1/

9

/16 g 20 19/32 g 3 45/

inch

16

inch

64

32°F to e104°F (0°C to e40°C)

*1

Emergency alert messages via Cable are unreceivable.

*2

The dimensional drawings are shown on the Spanish operation manual.

• As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product
improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units.
There may be some deviations from these values in individual units.

Optional Accessory

The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest shop.

• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.

Part name

Wall mount bracket

Model number

AN-37AG5

29

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 21 to set PC input signals.

PC Horizontal Frequency VESA StandardResolution Vertical Frequency

VGA

PC

XGA 1024 x 768

*These 4 formats are not supported by the analog RGB terminal.

DDC is a registered trademark of Video Electronics Standards Association.
VGA and XGA are registered trademarks of International Business Machines Corp.

WXGA 1360 x 768

720 x 400

640 x 480

800 x 600SVGA

31.5 kHz

31.5 kHz

37.9 kHz

37.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

47.7 kHz

70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz

O
O
O
O
O
O
O
O
O
O
O

*

*

*

*

Information on the Software License for This Product

Software composition

■

The software included in this product is comprised of various software components whose individual copyrights
are held by SHARP or by third parties.

Software developed by SHARP and open source software

■

The copyrights for the software components and various relevant documents included with this product that were
developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties,
and other relevant laws. This product also makes use of freely distributed software and software components
whose copyrights are held by third parties. These include software components covered by a GNU General Public
License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.

Obtaining source code

■

Some of the open source software licensors require the distributor to provide the source code with the executable
software components. GPL and LGPL include similar requirements. For information on obtaining the source code
for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the
following website:

http://www.sharpusa.com/gpl

We are unable to answer any questions about the source code for the open source software. The source code for
the software components whose copyrights are held by SHARP is not distributed.

Acknowledgements

■

The following open source software components are included in this product:

• linux kernel/busybox/uClibc/zlib/libpng/libjpeg

CLEARING THE SECRET NUMBER

If you forget the secret number, clear the secret number using the following procedure.

Select an item from the list below to display the secret number input screen. (For operating the on-screen

1

display menu, see page 17.)

• “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset” on the Setup menu.

• “Color System” on the Option menu.

• “Software Update” on the Digital Setup menu.

Press and hold both CHr and VOLk on the TV simultaneously until the message appears on the screen.

2

The secret number is .

• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.

30

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or
customer assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the
purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may
vary. Please contact 1-888-GO-SHARP for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of
purchase to the servicer, which proof must include the date of purchase.

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Specific Section

Your Product Model Number & Description: LC-32SB23U/LC-32SB220U/LC-32SB21U LCD Color Television

Warranty Period for this Product: One (1) year parts, 90 days labor from the date of purchase.

Additional Exclusions from
Warranty Coverage (if any):

Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To find the

What to do to Obtain Service: Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP

(Be sure to have this information available when you need service for your
Product.)

Image Retention resulting from a fixed image being displayed for long
periods of time is not covered by this Limited Warranty (see Operation
Manual on how to prevent this).

location of the nearest Sharp Authorized Servicer, please call Sharp toll free
at 1-800-BE-SHARP.

to have proof of purchase available. If you ship the Product, be sure it is
insured and packaged securely. Please use two persons to carry the Product,
transport it in its original packaging, and ensure that the Product is covered
to avoid scratches and damage. Sharp shall not be responsible for lost,
stolen or misdirected mail or for damage to the product incurred during
shipping.

OR VISIT www.sharpusa.com

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

SHARP CORPORATION

31

32