Sharp LC12A2E User Manual

LC-12A2E
Batteries for Remote Control
Quick Start Guide
1 Open the battery
cover.
Slide the cover while pressing down.
If problems persist, contact the SHARP Help Line (office hours) on tel: 0990-274277 and/or WEB-SITE: www.sharp.co.uk/support
LC-12A2EGuide 00.8.5, 5:17 PM1
2 Insert batteries (two
Position the positive and negative ends of the batteries as indicated.
3 Close the cover.
Power Connection
Household
power outlet
AC cord AC adapter
To DC input terminal (DC 12 V)
Antenna Connection
1) If your outdoor antenna uses a 75-ohm coaxial cable, change this for a new standard DIN45325 (IEC169-2) plug.
2) If your outdoor antenna uses a 300-ohm twin-lead flat feeder, change this for a 300-ohm to 75-ohm impedance converter.
75-ohm coaxial cable
(round cable)
Via antenna cable
(not supplied)
300-ohm twin-lead flat feeder
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
To antenna input terminal
LC-12A2EGuide 00.8.5, 5:17 PM2
Loading...
+ 2 hidden pages