Page 1
Why the AR-5316…
Designed for small offices and workgroups, the
new Sharp AR-5316 Dig
ital IMAGER delivers the
perfo
rmance you need in a multifunction
document system—al
l in a cost-efficient, compact
design. With 11” x 17” copying capability,
standard 600 dpi host-based printing, a 250-sheet
paper capacity, and 100-sheet bypass tray, this
efficient perfo
rmer can easily keep up with the
pace of busy offices. With an optional network
print serve
r, the Sharp AR-5316 Digital IMAGER
can be easily shared by additional users in your
office or workg
roup. Combine all these features
with Sharp’s world-class reliability, and you’ve got
a small office document system that’s hard to
beat.
The AR-5316 Digital Multifunctional
IMAGER™
Features
9 16 PPM copy speed
9 600 dpi true laser quality output
9 25% - 400% zoom range with 8 preset ratios
9 X/Y Zoom
9 350-sheet paper capacity, including 100-sheet
Bypass Tray
9 Optional 40-sheet Single Pass Document
Feeder
9 Cost-effective Toner-Save mode
9 Scan-Once Print-Many Memory Management
9 600 dpi host-based PC printing system
9 Standard IEEE 1284 parallel and USB-1.1
ports for flexible PC connections
9 Easy to change, customer-replaceable supply
system
9 Network printing option
9 Compact wingless design
Advanced Network Printing
Growing businesses or small workgroups can
easily add network printing with the optional
PRICOM™ 3100 print server. With a built-in RJ-
45 Ethernet port, this compact print server
connects directly into the parallel port of the AR-
5316. With simple, plug-and-play operation and
an easy-to-use interface, the PRICOM 3100
server delivers advanced features that include
web-based management, IP filtering, and
intelligent device monitoring.
Quick Reference Guide: AR-5316
Efficient, High-Quality Copying
The AR-5316 IMAGER provides many flexible
copy features designed to grow with your
business. With a speedy, 16 page-per-minute
copy speed and the capability to output
documents at 11” x 17”, the AR-5316 IMAGER
delivers advanced flexibility for any small office or
workgroup. With customer-replaceable supplies
that are easy to install, you can rest assured that
your workflow will always keep moving.
Description: Features & Options
1
The user-friendly control panel makes it
easy to use the AR-5316 Imager’s
advanced copy features.
Shown with optional 40-sheet document feeder.
Page 2
Quick Reference Guide: AR-5316
Pre-Setup: Tools, Documentation, & Admonitions
Toolbox Basics
Mechanical
• Screwdriver, Phillips #2
• Screwdriver, Flat #1
• Wrench, 1.5mm Hex head
• Feeler gauges
Electrical
• Voltmeter
• ESD wrist or ankle strap
• Approved surge suppressor
• 30x lighted viewing device
Miscellaneous
• Clean, soft, lint-free cloths
• Alcohol
Special Tools & Service Documentation
Electrical/Electronic Component
Admonitions
!
WARNING: Electrical hazard.
Employ proper precautions when
working with high-voltage electrical
equipment.
CAUTION: Improper handling of
electronic components can damage
the equipment.
Properly ground and wear an
electro-static device (ESD) on your
wrist or ankle when working with
electronic modules. Similarly, use
anti-static bags to protect electronic
components during storage or
shipping.
E
S
D
Material Safety Data Sheets
(MSDSs)*
* Download MSDSs at http://www.sharp-service.com
Laser Admonition
For your protection, do
not remove protective
covers or bypass safety
interlocks.
* Optional equipment
Product
Code
Description MSDS No.
AR-016TD Toner developer
cartridge (Black)
F-31381
AR-016DR Drum cartridge F-01381
2
Description Part No.
AR-5316, Service Manual SM_AR-5316
Code: 00ZAR5316/A1E
AR-5316, Parts Guide PG_AR-5316
Code: 00ZAR5316/P1E
*AR-RP6 / AR-SP6 Service
Manual
SM_AR-RP6 / AR-SP6
Code: 00ZARSP6//A1E
Page 3
Quick Reference Guide: AR-5316
Basic System Configuration
3
External Views
1 Glass cleaner 2 Document feeder cover
(when the SPF is installed) /
document cover
3 Document glass
4 Handles 5 Power switch 6 Operation panel
7 Paper output tray 8 Front cover 9 Paper trays
10Side cover 11 Side cover handle 12 Bypass tray guides
13Bypass tray 14 Bypass tray extension 15 Charger cleaner
Page 4
4
Quick Reference Guide: AR-5316
Basic System Configuration (cont’d)
Internal Views
18 Document feeder tray (when
the SPF is installed)
19 Original guides (when the SPF
is installed)
20 Feeding roller cover (when the
SPF is installed)
21 Right side cover (when the SPF
is installed)
22 Exit area (when the SPF is
installed)
23 TD cartridge
24 TD cartridge strap 25 TD cartridge lock release lever 26 Roller rotating knob
27 Fusing unit release levers 28 Drum cartridge 29 Drum cartridge handle
30 Fusing unit paper guide
Page 5
Quick Reference Guide: AR-5316
Optional Equipment
Optional Equipment
5
No. Option Name Model
1 40-Sheet Single Pass Feeder AR-SP6N
2 Network Print Server AR-PS3100
Page 6
Quick Reference Guide: AR-5316
Adjustments
6
Section Adjustment Item Adjustment Procedure/SIM No.
A Process section (1) Developing doctor gap adjustment Developing doctor gap adjustment
(2) MG roller main pole position adjustment MG roller main pole position adjustment
(3) Developing bias voltage check
(4) Main charger voltage check
B Mechanism section (1) Image position adjustment SIM-50
No. 2/3 mirror base unit installing position adjustment(2) Main scanning direction (FR direction) distortion
balance adjustment
Copy lamp unit installing position adjustment
(3) Main scanning direction (FR direction) distortion
adjustment
Rail height adjustment
(4) Sub scanning direction (scanning direction) distortion
adjustment
Winding pulley position adjustment
(5) Main scanning direction (FR direction) magnification
ratio adjustment
SIM 48-1
OC mode in copying (SIM 48-1)(6) Sub scanning direction (scanning direction)
magnification ratio adjustment
SPF mode in copying (SIM 48-5)
OC mode (SIM 50-12)(7) Off center adjustment
SPF mode (SIM 50-12)
(8) SPF white correction pixel position adjustment
(required in an SPF model when replacing the lens
unit)
SIM 63-7
C Image density
adjustment
(1) Copy mode SIM 46-1
Adjustment Item List
Page 7
Quick Reference Guide: AR-5316
Simulation
7
Simulation
Entering the Simulation Mode
Perform the following procedure to enter the simulation mode.
“#” key → Interrupt key → “C” key → Interrupt key →
Main code → Start key → Sub code → Start key
SIM Codes
Please refer to the SIM Codes list (pages 1 through 4) that follows.
Canceling the Simulation Mode
When the clear all key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and
the screen returns to the sub code entering display.
Note 1: After canceling the simulation mode, be sure to turn the
OFF/ON power switch to the ON position.
Note 2: If the machine is terminated by a jam error or paper empty
during copying in the adjustment by the simulation, recopying
is required.
Page 8
8
Quick Reference Guide: AR-5316
Simulation (Pg. 1 of 4)
SIM Codes
Main
Code
Sub
Code
Contents
01 Mirror scanning operation
02 Mirror home position sensor (MHPS) status display
01
06 Mirror scanning operation aging
01 Single paper feeder (SPF) Aging
02 SPF sensor status display
03 SPF motor operation check
08 SPG paper feed solenoid operation check
02
11 SPF PS release solenoid operation check
01 Operation panel display check
02 Fusing lamp and cooling fan operation check
05
03 Copy lamp lighting check
01 Paper feed solenoid operation check
02 Resist roller solenoid operation check
06
10 Cassette semi-circular roller cleaning
01 Warm-up display and aging with jam
06 Intermittent aging
07
08 Shifting with warm-up display
01 Developing bias output
02 Main charger output (Grid = HIGH)
03 Main charger output (Grid = LOW)
08
06 Transfer charger output
Page 9
Quick Reference Guide: AR-5316
Simulation (Pg. 2 of 4)
SIM Codes
(cont’d)
9
Main
Code
Sub
Code
Contents
10 - Toner motor operation
14 - Trouble cancel (except for U2)
16 - U2 trouble cancel
20 01 Maintenance counter clear
21 01 Maintenance cycle setting
01 Maintenance counter display
02 Maintenance preset display
03 Jam memory display
04 Jam total counter display
05 Total counter display
08 SPF counter display
09 Paper feed counter display
12 Drum counter display
13 CRUM type display
14 P-ROM version display
15 Trouble memory display
17 Copy counter display
18 Printer counter display
21 Scanner counter display
22
22 SPF jam counter display
Page 10
Main
Code
Sub
Code
Contents
01 Jam total counter clear
02 Trouble memory clear
04 SPF counter clear
06 Paper feed counter clear
07 Drum counter clear
08 Copy counter clear
09 Printer counter clear
13 Scanner counter clear
24
14 SPF jam total counter clear
01 Main motor operation check 25
10 Polygon motor operation check
02 Size setting
03 Auditor setting
05 Count mode setting
06 Destination setting
07 Machine condition check (CPM)
18 Toner save mode setting
30 CE mark conformity control ON/OFF
31 Auditor mode exclusive setup
26
36 Cancel of stop at maintenance life over
38 Cancel of stop at drum life over
39 Memory capacity check
42 Transfer ON/OFF timing control setting
43 Side void amount setting
51 Copy temporary stop function setting
Quick Reference Guide: AR-5316
Simulation (Pg. 3 of 4)
SIM Codes
(cont’d)
10
Page 11
Quick Reference Guide: AR-5316
Simulation List (Pg. 4 of 4)
SIM Codes
(cont’d)
11
Main
Code
Sub
Code
Contents
30 01 Paper sensor status display
42 01 Developing counter clear
01 Fusing temperature setting
12 Standby mode fusing fan rotation setting
43
13 Fusing paper interval control allow/inhibit setting
34 Transfer current setting 44
40 Setting of rotation time before toner supply
01 Copy density adjustment (300 dpi)
02 Copy density adjustment (600 dpi)
46
09 Copy exposure level adjustment, individual setting (Text) 300 dpi
10 Copy exposure level adjustment, individual setting (Text) 600 dpi
11 Copy exposure level adjustment, individual setting (Photo) 600 dpi
18 Image contrast adjustment (300 dpi)
19 Exposure mode setting (Gamma table setting/AE operation mode setting/Photo image process
setting
20 SPF exposure correction
29 Image contrast adjustment (600 dpi)
30 AE limit setting
31 Image sharpness adjustment
48 01 Main scanning magnification ratio adjustment
05 SPF mode sub scanning magnification ratio adjustment in copying
49 01 Flash ROM program writing mode
12 Standby mode fusing fan RPM setting
50 01 Image lead edge adjustment
06 Copy lead edge position adjustment (SPF)
10 Paper off-center adjustment
12 Document off-center adjustment
51 02 Resist amount adjustment
53 08 SPF scanning position automatic adjustment
10 SPF scan position change-over setting
61 03 HSYNC output check
63 01 Shading check
07 SPF automatic correction
64 01 Self print
Page 12
Program
Name
Program
No.
Description Default Parameters
Auto clear time 1 “Auto clear time” automatically returns the copy settings to the
initial settings when a certain period of time elapses after
a copy is made. This program is used to select the period
of time. “Auto clear time” can also be disabled.
60 sec 1 (OFF)
2 (10 sec)
3 (20 sec)
4 (60 sec)
5 (90 sec)
6 (120 sec)
Preheat mode 2 This function automatically switches the machine to a low power
consumption state if the set duration of time elapses
without the machine being used when the power is on.
The POWER SAVE indicator lights up, however, the keys on the
operation panel can be used. Normal operation
automatically resumes when a key on the operation panel
is pressed, a print job is received, or an original is placed.
1 min 1 (1 min)
2 (5 min)
3 (30 min)
4 (60 min)
5 (120 min)
6 (240 min)
Auto power shut-off timer 3 This function automatically switches the machine to a state that
consumes even less power than preheat mode if the set
duration of time elapses without the machine being used
when the power is on.
All lights except the POWER SAVE indicator and ON LINE
indicator go off. To resume normal operation, press the
[START] key. Normal operation also resumes
automatically when a print job is received or scanning is
begun from a computer. While in auto power shut-off
mode, no keys (except the [START] key) can be used.
5 min 1 (5 min)
2 (30 min)
3 (60 min)
4 (120 min)
5 (240 min)
Stream feeding mode 4 When copying using the SPF, during the period of time that the
SPF indicator blinks after an original has been scanned
(about 5 seconds), a subsequent original can be placed
and automatically fed into the machine.
OFF 0 (OFF)
1 (ON)
Auto power shut-off setting 5 Use this setting to enable or disable auto power shut-off. ON 0 (OFF)
1 (ON)
Quick Reference Guide: AR-5316
User Programs (Pg. 1 of 2)
12
List of User Programs
Page 13
Quick Reference Guide: AR-5316
User Programs (Pg. 2 of 2)
List of User Programs (cont’d)
13
Program
Name
Program
No.
Description Default Parameters
Auditing mode 10 Use to enable or disable “Auditing mode”.
“Auditing mode” is initially disabled.
OFF 0 (OFF)
1 (ON)
Account number entry 11 Use to set up account numbers.
Up to 20 accounts can be established.
-- --
Account number change 12 Use to change an account number. -- --
Account number deletion 13 Use to delete an account number.
A single account number can be deleted, or all account numbers
at once.
Delete
Single
Account
0 (Delete single account)
1 (Delete all accounts)
Number of copies per account 14 This displays the number of copies made by each account. The
maximum count is 49,999. If this number is exceeded, the count
will start over from 0.
-- 0 (OFF)
1 (ON)
Resetting account 15 Use to reset the copy count of an account to 0. The copy count
of a single account or of all accounts can be reset.
Reset single
account
0 (Reset single account)
1 (Reset all accounts)
Resolution in Auto/Text mode 23 This setting is used to change the copy resolution in AUTO and
TEXT mode from 600 x 300 dpi to 600 x 600 dpi (high-quality
mode). Scanning is slower when high-quality mode is used.
300 dpi 1 (300 dpi)
2 (600 dpi)
Page 14
Quick Reference Guide: AR-5316
Maintenance Table
Maintenance Table
14
X Check (Clean, adjust, or replace when required.)
O Clean
Replace
Adjust∆
Lubricate
Legend
Unit Name
Part Name
When Calling
Reflector
○
Lamp unit
Mirror
○
Mirror
○
No. 2/3 mirror unit
Pulley X
CCD peripheral Lens
○
Table glass
○
Glass
White plate
○
Drive wire X
Rail X
Document cover
○
Optical section
Other
Document size sensor
○
LSU○
Dust-proof glass
○
Take-up roller
(manual/SPF)
○
Paper feed roller
○
Paper feed section Multi-paper feed section
Spring clutch
○
PS roller
○
Transport (paper exit)
rollers
○
Paper transport section
Spring clutch
○
Upper heat roller
○
Pressure roller
○
Pressure roller bearing X
Upper separation pawl X
Lower separation pawl X
Fusing section
Cleaning pad X
Gears X Drive section
Belts
X
Paper exit section Ozone filter
X
Loading...