
ENGLISH
MODEL
HT-SL72 / HT-SL77
SOUND BAR HOME THEATER SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
● HT-SL72 SOUND BAR HOME THEATER SYSTEM consisting of TX-SL72 (Amplifier System),
CP-SW72 (Active Subwoofer System) and HT-SL72 (Sound Bar).
● HT-SL77 SOUND BAR HOME THEATER SYSTEM consisting of TX-SL77 (Amplifier System),
CP-SW77 (Active Subwoofer System) and HT-SL77 (Sound Bar).
HT-SL72 HT-SL77
● This product is recommended for flat panel TV (LED, LCD and plasma).
HT-SL77:
● For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
● This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV’s CEC must be enabled. For detail, refer to the operation manual of the TV.
● For TV without HDMI CEC, headphone or RCA analog connection is available.
● For TV without HDMI, headphone or RCA connection is required.
● This unit supports HDMI which enables Audio Return Channel (ARC).
HT-SL72:
● HDMI connection and input selector are not available.
Recommended Connection:
Model TV Type CEC FUNCTION CONNECTION (TV) CONNECTION METHOD
HT-SL77
HT-SL72
&
HT-SL77
HDMI
(with ARC)
with HDMI MUST BE ENABLED HDMI IN Page 11, Method 2
HDMI TV without
CEC & ARC or non
HDMI TV
MUST BE ENABLED
NONE
HDMI IN
(ARC)
HEADPHONE OUT Page 12, Method 1
RCA Page 12, Method 2
Page 11, Method 1
Printed in Malaysia
TINSZB271AWZZ
12C R KI 1

The following accessories are included. This product has no remote control.
Accessories
HT-SL77 only
RCA to Headphone
Cable (1pin - 2 pins) x 1
(QCNWGA081AWPZ)
Wall Mount
Angle x 2
(LANGKA225AW01)
Screw for Brackets
x 6
(XEBY830P08000)
Subwoofer Stand x 2
(GITAUA004AW01)
Pattern Paper (Sound Bar)
(TCAUHA030AWZZ)
Sound Bar Stand
Cushion x 2
(PCUSSA190AWZZ)
HT-SL77 only HT-SL77 only
2 - 5/
(
55 mm)
32"
S
O
U
S
O
U
N
D
BA
R
H
O
M
E
T
H
E
A
T
E
RS
Y
S
T
E
M
H
T
-
S
L
7
7
Sound Bar Cover Joint
for 46" TV x 1
(GCOVAA353AW01)
N
Sound Bar Cover Joint
for 52" TV x 1
(GCOVAA354AW01)
HT-SL72 only
7 - 13/32"
(188 mm)
D
B
A
R
H
O
M
E
T
H
EA
T
E
R
S
Y
S
T
E
M
H
T
-
S
L
7
7
Audio Cable x 1
(QCNWGA080AWPZ)
Speaker Wire
(QCNWHA046AW01)
HT-SL77 only
Sound Bar Cover Joint
(GCOVAA355AW01)
HDMI Cable x 1
(QCNWGA077AWPZ)
Sound Bar Stand
(GITAUA012AW01)
14 - 17/32"
(369 mm)
SO
U
N
D
B
A
R
H
O
M
E
T
H
E
A
T
E
R
S
Y
S
T
E
M
H
T
SL
7
7
for 60" TV x 1
(LHLDZA267AWSA)
Amplifier Stand x 2
x 2
(GITAUA021AW01)
HT-SL77 only
S
O
U
N
D
Sound Bar Cover Joint
for 70" TV x 1
(GCOVAA356AW01)
Wall Mount
Bracket x 2
23 - 3/8"
(594 mm)
B
A
R
H
O
M
ET
H
E
A
T
E
R
S
Y
ST
E
M
H
T
-
S
L
7
7
14 - 17/32"
(369 mm)
SO
U
N
D
B
A
R
H
O
M
E
T
H
EA
T
E
R
S
Y
S
T
E
M
H
T
SL
7
2
10 - 2/16" (257 mm)
Sound Bar Cover Joint
for 60" TV x 1
Stand Cover x 2
(GCOVAA330AW01)
(GCOVAA360AW01)
The illustrations printed in this operation manual are for the model HT-SL77.
E-1
13 - 7/32" (336 mm)
Stand Base x 2
(GDAI-A016AW01)

NOTE
Special Notes
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss
or theft, please record below the model number and
serial number which are located on the rear of the unit.
Please retain this information.
Model number ........................................................
Serial number ........................................................
Date of purchase ........................................................
Place of purchase ........................................................
ENERGY STAR
®
Prog
ram Information
Products that have earned
the ENERGY
STAR
®
are
desig
ned to protect the
environment throu
gh
s
uperior ener
g
y efficiency.
ENERGY
STAR
®
i
s a U.
S. registered mark.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV
technician for help.
WARNING
FCC Regulations state that any unauthorized changes or
modifications to this equipment not expressly approved by
the manufacturer could void the user’s authority to operate
this equipment.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
E-2

Electricity is used to perform many useful functions, but it
Important Safety Instructions
can also cause personal injuries and property damage if
improperly handled. This product has been engineered
and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or
fire. In order to prevent potential danger, please observe
the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong
the service life of this product, please read the following
precautions carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
Amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For product intended to operate
from battery power, or other sources, refer to the
operating instructions.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock.
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the apparatus.
18) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in
any way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
19) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
20) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
21) Wall or ceiling mounting - When mounting the product
on a wall or ceiling, be sure to install the product
according to the method recommended by the
manufacturer.
22) Power Lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
23) Protective Attachment Plug - The product is equipped
with an attachment plug having overload protection.
This is a safety feature. See Instruction Manual for
replacement or resetting of protective device. If
replacement of the plug is required, be sure the
service technician has used a replacement plug
specified by the manufacturer that has the same
overload protection as the original plug.
24) Stand - Do not place the product on an unstable cart,
stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting
in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the
E-3
product. When mounting the product on a wall, be
sure to follow the manufacturer
only the mounting hardware recommended by the
manufacturer.
’
s instructions. Use

For U.S customer only
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will,
at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent
at no charge to the purchaser for part
s or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warra
nty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty las
ts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive wa
rranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full sa
tisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way respon
sible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage
(if any):
Where to Obtain Service:
What to do to Obtain Service:
HT-SL72 / HT-
SL77 Sound Bar Home Theater System
(Be sure to have this information available when you need
service for your Product.)
One (1) year parts and labor from the date of purchase.
Non-functional accessories, supplies, and consumable
items.
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest S
harp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If
you ship the Product, be sure it is insured and packaged
securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
Precautions
General
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
● Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
4" (10 cm) of free space along the sides, top and
back of the equipment.
ACTIVE SUBWOOFER SYSTEM
HT-SL72
4"
(10 cm)
● Use the unit on a firm, level surface free from vibration.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers, fax
machines, etc.) which generate electrical noise.
● Do not place anything on top of the system.
E-4
4"
(10 cm)