Sharp HT-CN400DVE, HT-CN500DVE User Manual

MODEL

HT-CN400DVE HT-CN500DVE

HOME CINEMA WITH DVD

Supplied aerial connection

FM aerial

AM loop aerial

This Quick Start Guide will help you to correctly install and operate your system.

If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland).

0101

Connections to TV

Setting VIDEO OUTPUT

When connecting to the SCART OUT socket or S-VIDEO socket, switch the VIDEO OUTPUT setting accordingly. See page 23 in the operation manual.

Caution:

Do not connect a TV or VCR to SCART OUT, S-VIDEO OUT and VIDEO OUT at the same time. The unit supports only a single connection.

Connecting the supplied speakers

Connecting speaker wires

Make sure to leave the AC power lead disconnected when connecting the speakers.

To prevent accidental short circuits between and terminals, connect the speaker wires to the speakers first and then to the unit.

Connect the wires to the speakers.

Black

Red

Connect the other end to the main unit.

Red

Black

Video cable (commercially available)

To video input socket

To S-video input socket

S-video cable (commercially available)

Video signal

Audio connections to TV, VCR, etc.

Video signal

SCART cable (supplied)

Video/Audio signal

To SCART input socket

Caution: Do not short-circuit the speaker wires.

If the power is turned on, malfunction may occur.

Black

Front speaker

(right)

Red

Centre speaker

Black

Green

Incorrect

Surround speaker

Black

(left)

Blue

92LCN500U0600 03F R AO 1

Audio signal

Audio cable (commercially available)

Audio signal

Audio cable (commercially available)

Audio signal

Audio cable (commercially available)

To audio input socket

To audio output sockets

MD recorder

VCR

Black

Front speaker

(left)

White

Black

Surround speaker

(right)

Grey

Black

Subwoofer

Wall socket (AC 230 V, 50 Hz)

Purple

Do it last!

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket.

START

DVD playback

Press the ON/STAND-BY

button to turn the power on

Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc. accordingly. Press the ON/STAND-BY button again to set the unit to the stand-by mode.

When the input is not set to the disc

mode, press the FUNCTION button repeatedly to display the startup screen

The startup screen appears.

NO DISC

Go to the step 3

DVD VideoCD CD

Audio Visual Entertainment

Installation image

Centre speaker

Front speaker (right)

Surround

speaker (right)

The best surround effect will

Surround

speaker (left)

Front speaker (left)

Subwoofer

be achieved by placing each speaker at the same distance from the listening position.

Refer to the operation manual

Enjoying various sounds

(pages 44 and 45).

Enjoy DTS or Dolby Digital sound in 5.1 or 2-channel.

Whilst a disc is playing, press the LISTENING button repeatedly to select the desired listening mode.

Press the OPEN/CLOSE button to

open the disc tray

Place the disc on the disc tray, label side up. Be sure to place 8 cm

Label side

(3") discs in the middle of the disc position.

Press the OPEN/CLOSE button to

close the disc tray

Disc tray

Discs supporting auto star t will start to play once you close the disc tray even if you do not press the PLAY button.

If playback does not start, press the PLAY button.

Go to the step 5

OPEN/ CLOSE

TITLE

MENU/PBC

PROG

SLOW/MEMORY

PRESET

LISTENING

DIRECT

ANGLE

SET UP

LANGUAGE

SUBTITLE

ENTER

MODE

0>10

REPEAT

RETURN

ZOOM AUDIO

MUTE

TUNING

ADJ/VOL

321

ON/

STAND-BY

DISPLAY

ST/MO

SLEEP

4 8765

STEP

A-B

NTSC/PAL

5.1ch surround sound:

Example:DTS

DIGITAL Pro Logic

RSLS

STEREO

CD MP3V

Enjoy 5.1-channel surround sound.

Centre speaker

Front speaker (left)

Subwoofer

Surround speaker (left)

PRESET

PCHPTRKTITLE

LISTENING

Front speaker (right)

Surround speaker (right)

2-ch stereo sound:

DIGITAL Pro Logic

RSLS

STEREO

Enjoy 2-channel stereo sound.

Front speaker (left)

Subwoofer

PRESET

CD MP3V

Front speaker (right)

PCHPTRKTITLE

Battery installation

Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. Do not mistake and .

Back of remote control

If trouble occurs

When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and tur n the power on again.

2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.

When the protection circuit is activated:

When short-circuiting the speaker leads or turning the volume too high, the protection circuit may be activated and the system may enter the stand-by mode. Unplug the unit and, after 15 minutes or more, plug it in again. Turn down the volume if set too high.