ENGLISH
R
*Plasmacluster is a trademark of Sharp
Corporation.
AIR PURIFIER
OPERATION MANUAL
FU-Z35TA
Free standing type
FU-Z35TA.indd 1 10.4.26 1:14:01 PM
FU-Z35TA.indd 2 10.4.26 1:14:02 PM
ENGLISH
FU-Z35TA.indd 3 10.4.26 1:14:04 PM
FU-Z35TA.indd 4 10.4.26 1:14:06 PM
ENGLISH
FU-Z35TA.indd 5 10.4.26 1:14:09 PM
FU-Z35TA.indd 6 10.4.26 1:14:10 PM
ENGLISH
FU-Z35TA.indd 7 10.4.26 1:14:11 PM
FU-Z35TA.indd 8 10.4.26 1:14:12 PM
ENGLISH
FU-Z35TA.indd 9 10.4.26 1:14:13 PM
FU-Z35TA.indd 10 10.4.26 1:14:14 PM
ENGLISH
FU-Z35TA.indd 11 10.4.26 1:14:16 PM
FU-Z35TA.indd 12 10.4.26 1:14:18 PM
ENGLISH
FU-Z35TA.indd 13 10.4.26 1:14:20 PM
FU-Z35TA.indd 14 10.4.26 1:14:21 PM
ENGLISH
FU-Z35TA.indd 15 10.4.26 1:14:21 PM
MEMO
FU-Z35TA.indd 16 10.4.26 1:14:22 PM
ENGLISH
FU-Z35TA.indd 17 10.4.26 1:14:22 PM
Please read before operating your new Air Purier
Some odour ingredients absorbed by the lter may become separated and
may be discharged through the air outlet and result in additional odour. Depending on the usage environment, especially when the product is used in
a condition signicantly more severe than household use, this odour may
become strong in a shorter period than expected.
In this case we recommend purchasing the optional replacement lter.
NOTE
• The air purier is designed to remove air-suspended dust and odour, but not harmful gases (for
example, carbon monoxide contained in cigarette smoke). If the odour sources still exist, it cannot
completely remove the odour (for example, odours from construction materials and pet odours).
• It is suggested to open the window a bit when you are smoking in order to facilitate ventilation.
HEPA lter
Deodorizing lter
Elements removed by lter
Dust
pollen, dust, particles of cigarette smoke,
pet dander
Odor
cigarette smoke odor,household odor (toilet
/raw garbage / pet, etc.)
FU-Z35TA.indd 18 10.4.26 1:14:22 PM
ENGLISH
E-1
ENGLISH
Thank you for purchasing the SHARP Air Puri-
er. Please read this manual carefully for the
correct usage information. Before using this
product, be sure to read the section: “Important
Safety Instructions.”
After reading this manual, retain it in a convenient location for future reference.
IMPORTANT SAFETY INSTRUCTIONS
.....
E-2
• WARNING ....................................................
E-2
• CAUTIONS CONCERNING OPERATION ...
E-3
• INSTALLATION GUIDELINES ......................
E-3
• FILTER GUIDELINES ..................................
E-3
PART NAMES
...............................................
E-4
• MAIN UNIT DISPLAY ...................................
E-4
• ILLUSTRATIVE DIAGRAM ..........................
E-4
• INCLUDED ...................................................
E-5
• BACK ............................................................
E-5
PREPARATION
............................................
E-6
• FILTER INSTALLATION ...............................
E-6
OPERATION
.................................................
E-8
• MAIN UNIT OPERATION .............................
E-8
CARE AND MAINTENANCE
.....................
E-9
• BACK PANEL AND SENSOR .......................
E-9
• UNIT .............................................................
E-9
• FILTER REPLACEMENT GUIDELINES .....
E-10
TROUBLESHOOTING
..............................
E-11
SPECIFICATIONS
......................................
E-12
CONTENTS
FEATURES
Plasmacluster technology uses plasma discharge to produce and release
the same positive and negative ions
as those found in nature ("Plasmacluster ions").
This is a unique air cleaning technology of the SHARP CORPORATION for
breaking down and inactivating such
potential allergens as the fecal matter
or corpses of aerial mites*1, viruses *2
and mould and bacteria *3 suspended
in the air, and has been substantiated
by third-party organisations both in
Japan and overseas.
When there is a high density of Plasmacluster ions in the air, the smell of
cigarette smoke trapped in curtains
or sofas is removed in about 80 minutes*4, and when clothing is hung in
a place exposed to the direct air expelled from the unit generating Plasmacluster ions, the smell of sweat is
reduced to a virtually imperceptible
level in one night (about 6 hours).
"Plasmacluster" technology
*1 Gr aduate School o f Advanced Sci-
ences of Matter, Hiroshima University,
Japan
Measurement of action on the poten
-
tial allergens of aerial mites in (13m²)
*2 Retroscreen Virology, Ltd., London, UK
Measurement of ratio of viruses elimi
-
nated from the air in a 1m³ box
*3 Ishikawa Health Service Association,
Japan
Measurement of aerial mold and bac
-
teria with an air sampler (13m²)
*4 Japan Spinners Inspecting Foundation,
Japan
Evaluation of deodorizing effect on
odor-imbued fragments of cloth
FU-Z35TA.indd 19 10.4.26 1:14:22 PM
When using electrical appliances, basic safety precautions should be followed, including the
following:
WARNING
- To reduce the risk of electrical shock, re or injury to persons:
• Read all instructions before using the unit.
• Use only a 220 volt outlet.
• Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet
is loosened.
• Periodically remove dust from the power plug.
• Do not insert ngers or foreign objects into the intake or air outlet.
• When removing the power plug, always hold the plug and never pull the cord.
Electrical shock and/or re from short circuit may occur as a result.
• Do not remove the plug when your hands are wet.
• Do not use this unit near gas appliances or replaces.
• Remove the power plug from the wall outlet before cleaning the unit and when not using the
unit.
Electrical shock from bad insulation and/or re from short circuit may occur as a result.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent,
Sharp Approved Service Centre or similarly qualied person in order to avoid a hazard.
• Do not operate when using aerosol insecticides or in rooms where there is oily residue, incense,
sparks from lit cigarettes, chemical fumes in the air or in very high humidity conditions, such as a
bathroom.
• Be cautious when cleaning the unit. Corrosive cleansers may damage the exterior.
• Only Sharp Approved Service Centre should service this air purier. Contact the nearest Service
Centre for any problems, adjustments, or repairs.
• This appliance is not intended for use by persons (including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
NOTE
- Radio or TV Interference
If this air purier should cause interference to radio or television reception, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the unit and radio/TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
E-2
IMPORTANT SAFETY INSTRUCTIONS
FU-Z35TA.indd 20 10.4.26 1:14:22 PM
ENGLISH
E-3
CAUTIONS CONCERNING OPERATION
• Do not block the intake and/or air outlet.
• Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into
contact with steam.
• Do not lay the unit down when using.
• Always hold the handle on both sides of the unit when moving it.
Holding the back panel when carrying may cause it to detach, thus dropping the unit and resulting
in bodily injury.
• Do not operate the unit without the lter.
• Do not wash and reuse the lter .
Not only does it not improve lter performance, but also may cause electrical shock or malfunction.
• Clean the exterior with a soft cloth only.
The unit surface may be damaged or cracked.
In addition, the sensors may malfunction as a result.
INSTALLATION GUIDELINES
• During the operation of the product, please place the unit at least 2 m away from equipment
utilizing electrical waves such as televisions, radios or wave clocks.
• Avoid locations where curtains, etc., come into contact with the intake or air outlet.
Curtains, etc., may become dirty or a malfunction may occur.
• Avoid locations where the unit is exposed to condensation, due to rapid temperature
changes.
(If it is unavoidable please allow unit to stand for 1 hour before switching on.)
(Use under appropriate conditions between 0 and 35˚C in the room.)
• Place on a stable surface with sufcient air circulation.
When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly.
• Do not install when there is a possibility of soot, such as in a kitchen, etc.
The unit surface may crack as a result.
• Leave about 60cm of space from the wall.
The wall behind the air outlet may become dirty as time passes. When using the unit for extended
period of time in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty.
In addition, periodically clean the wall.
FILTER GUIDELINES
• Follow the instructions in this manual for correct care and maintenance of the lter.
Use only lter designed for this product.
FU-Z35TA.indd 21 10.4.26 1:14:22 PM
Handle
Main Unit
E-4
MAIN UNIT DISPLAY
ILLUSTRATIVE DIAGRAM
PART NAMES
POWER ON/OFF Button
Plasmacluster Ion ON/OFF Button
MODE Button
Fan Speed
Indicator Lights
Odour
Sensor
CLEAN SIGN
The odour sensor continuosly monitors
the air and changes colour depending
on air punity.
Green Orange Red
Clean Very Impure
Plasmacluster
Ion ON/OFF
Indicator Light
FU-Z35TA.indd 22 10.4.26 1:14:23 PM
ENGLISH
E-5
INCLUDED
• Operation manual
BACK
Air Outlet
Power Cord
Plug
Air Inlet
(Shape of plug depends on country.)
Tab
Handle
HEPA lter
Deodorizing lter
Date Label
Back Panel
FU-Z35TA.indd 23 10.4.26 1:14:23 PM
PREPARATION
E-6
Be sure to remove the power plug from the wall outlet.
To maintain the quality of the lter, they are installed in the main unit and packed in
plastic bag. Be sure to remove the lter from the plastic bag before using the unit.
Remove the lter
Remove the Back Panel.
Pull the tab at the top of the Back Panel.
Intall the lter
FILTER INSTALLATION
Remove the Deodorizing lter
and HEPA lter from the plas-
tic bags.
Do not install the HEPA lter backwards or the unit will not operate
properly.
Place the HEPA lter and Deodorizing ler within the
main unit.
1
2
2
1
1
Tab
Deodorizing lter
HEPA lter
FU-Z35TA.indd 24 10.4.26 1:14:24 PM
ENGLISH
Replace the Back Panel to the main unit.
E-7
2
3
Push until it clicks into place.
Fill in the usage start date on the Date Label.
Date Label
Use the date as a guide for the lter replacement schedule.
FU-Z35TA.indd 25 10.4.26 1:14:24 PM
Fan Speed Indicator Lights
Plasmacluster Ion Indicator Light
POWER ON/OFF
Button
MODE Button
Plasmacluster Ion
ON/OFF Button
OPERATION
MAIN UNIT OPERATION
E-8
Power ON/OFF Button
• Press to start operation (short beep) and stop operation
(long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator
Light turn on/off.
• Unless the power cord has been unplugged, the operations starts in the previous mode it was operated in.
LOW operation
The unit will operate quietly using
minimal air intake.
MEDIUM operation
The unit will operate at a fan speed
of MEDIUM.
MAX operation
The unit will operate at a fan speed
of MAX.
AUTO operation
The fan s p eed i s auto m atical l y swi t ched
(between HIGH and LOW) depending on the
amount of impurities in the air. The sensors
detect impurities for efcient air purcation.
MODE Button
• Press the MODE Button to select the desired fan speed.
Indicator Lights will show the fan speed currently selected.
• The operation mode can be switched as below.
Plasmacluster Ion ON/OFF Button
Press the Plasmacluster Ion ON/OFF Button to turn
Plasmacluster Ion Mode ON and OFF.
When Plasmacluster Ion is ON, the Plasmacluster Ion
Indicator Light will turn on.(blue)
<When the CLEAN-SIGH is too bright>
Press the Plasmacluster Ion ON/OFF Button for 3 seconds to switch the CLEAN-SIGN ON and OFF.
FU-Z35TA.indd 26 10.4.26 1:14:25 PM
ENGLISH
E-9
To maintain optimum performance of this air purier, please clean the unit including the lter
periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet
hands. Electrical shock and/or bodily injury may occur as a result.
CARE AND MAINTENANCE
UNIT
Care Cycle
Whenever dust accumulates on the unit or every 1 month
To prevent dirt or stains on the main unit, clean as often as necessary. If stains are
allowed to remain, they may become difcult to remove.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile uids
Benzine, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
Care Cycle
Whenever dust accumulates
on the unit or every 2 months
Gently remove dust from the sensor opening and the back panel, using a vacuum
cleaner attachment or similar tool.
Back Panel
<When the back panel has stubborn dirt>
1
In case of heavy dirt, soak the back panel in water with a small amount of kitchen
detergent.
(Approx. 10min.)
(Avoid scrubbing the back panel hard when washing.)
2
Rinse the back panel repeatedly with clean water to remove
the solution residue.
3
Drip dry lter to remove excess water.
BACK PANEL and SENSORS
FU-Z35TA.indd 27 10.4.26 1:14:26 PM
E-10
Date Label
Filter life vary depending on the room environment, usage, and location
of the unit.
If dust or odour persists, replace the lter.
(Refer to “Please read before operating your new Air Purier”)
Guide for lter replacement timing
• The following lter life and replacement period is based on the condition of smoking 5
cigarettes per day and the dust collection/deodorization power is reduced by half compared
with that of new lter.
We recommend to replace the lter more frequently if the product is used in a condition sig
-
nicantly severer than normal household use.
FILTER REPLACEMENT GUIDELINES
•HEPA lter About 2 years after opening
•Deodorizing lter About 2 years after opening
REPLACING THE FILTER
1
See page E-6,7 for directions on
how to install the filter when replacing.
2
Fill in the usage start date of the
lter on the Date La
bel.
Replacement Filters
Model : FZ-30SFTA
•HEPA lter : 1 unit
•Deodorizing lter : 1 unit
Please consult your dealer for purchase of replacement lter.
CARE AND MAINTENANCE
Disposal of Filter
Please dispose of the replaced lter according to the local disposal laws and regulations.
HEPA lter materials :
•Filter : Polypropylene
•Frame : Polyester
Deodorizing lter materials :
•Polypropylene, Polyester, Activated charcoal
HEPA lter
Deodorizing lter
FU-Z35TA.indd 28 10.4.26 1:14:26 PM
ENGLISH
TROUBLESHOOTING
Before calling for service, please review the Troubleshooting chart below, since the problem may not
be a unit malfunction.
SYMPTOM
REMEDY (not a malfunction)
Odours and smoke are not
removed.
• Replace the lters if they appear to be heavily soiled.
(See E-10)
The Clean Sign illuminates
green even when the air is
impure.
The Clean Sign illuminates
orange or red even when the
air is clean.
A clicking or ticking sound
is heard from the unit.
The discharged air has an
odour.
The unit does not operate
when cigarette smoke is in
the air.
The Clean Sign are turned
off.
• The air could be impure at the time the unit was plugged in.
Unplug the unit, wait one minute, and plug the unit in again.
• Sensor operation is affected if the odour sensor openings are
dirty or clogged. Gently clean the dust sensors.
(See E-9)
• Clicking or ticking sounds may be audible when the unit is gen
-
erating Plasumacluster ions.
• Check to see if the lter are heavily soiled.
• Clean or replace the lter.
• Plasmacluster Air Purifiers emit small traces of ozone which
may produce an odour.
• Is the unit installed in a location that is difcult for the sensor to
detect cigarette smoke?
• Are the dust sensor openings blocked or clogged?
(In this case, clean the openings.) (See E-9)
• Check to see if the Lights OFF Mode selected. If so, then press
the Lights Control Button to activate the indicator lights.
(See E-8)
E-11
The Clean Sign lights
change colour frequently.
• The Clean Sign lights automatically change colours as impurities are detected by the odour sensor.
Flashing of the Fan Speed
Indicator Light ' '.
• Abnormal fan motor •
Turn power OFF to cancel the error
display, wait one minute, and then
turn power ON.
FU-Z35TA.indd 29 10.4.26 1:14:26 PM
SPECIFICATIONS
Model
Power supply
Fan Speed Adjustment
Rated Power
Fan Speed
Recommended Room Size
Cord Length
Dimensions
Weight
Fan
Speed
Operation
~26m
2 *1
~20m
2 *2
2.0m
356mm(W)x180mm(D)x510mm(H)
5.0kg
MAX
28W
210m3/hour
MED
11W
132m3/hour
LOW
4.3W
60m3/hour
FU-Z35TA
220V 50Hz
High density Plasmacluster ion recommended room size
*1
*2
Size of a room which is appropriate for operating the unit at maximum fan speed.
•It ind icate s the spa ce wh ere a cer tain amoun t of dust parti cles can b e re moved in 3 0
minutes(JEM1467).
Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the oor) when the product is
placed next to a wall and run at the MAX operation position.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 0.7W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
The class of the HEPA lter by EN 1822 is H10.
E-12
FU-Z35TA.indd 30 10.4.26 1:14:26 PM
ENGLISH
FU-Z35TA.indd 31 10.4.26 1:14:26 PM
Printed in China
TINS-A421KKRZ 10D-
1
FU-Z35TA.indd 32 10.4.26 1:14:27 PM
Loading...