SHARP FU-A80A installation Guide

0 (0)

AIR PURIFIER

OPERATION MANUAL

Free standing type

FU-A80A

Device of this mark is a trademark of Sharp Corporation.

Plasmacluster is a registered trademark or a trademark of Sharp Corporation.

5JCTR 2NCUOCENWUVGT 5JCTR

ENGLISH

OP_FU-A80A-EN+HK.indb 1

 

 

9/21/11 2:42:54 PM

 

 

 

 

 

 

Please read before operating your new Air Purifier

Some odor ingredients absorbed by the filters may become separated and may be discharged through the air outlet and result in additional odor. Depending on the usage environment, especially when the product is used in a condition significantly more severe than household use, this odor may become strong in a shorter period than expected.

The air purifier is designed to remove air-suspended dust and odor, but not harmful gases (for example, carbon monoxide contained in cigarette smoke). If the odor sources still exist, it cannot completely remove the odor (for example, odor from construction materials and pet odor).

It is suggested to open the window a bit when you are smoking in order to facilitate ventilation.

In this case we recommend purchasing the optional replacement filters.

HEPA Filter (white)

Dust Removal

pollen, dust, particles of cigarette

smoke, pet dander

Active Carbon

Deodorizing Filter (black)

Odor Removal

cigarette smoke odor, household odor

OP_FU-A80A-EN+HK.indb 2

 

 

9/21/11 2:42:57 PM

 

 

 

 

 

 

ENGLISH

FEATURES CONTENTS

EXCLUSIVE AIR PURIFYING TECHNOLOGY

Filtration System + Plasmacluster Ion

REMOVE ODOR

Active Carbon Deodorizing Filter absorbs many common household odors.

REMOVE DUST, POLLEN, DANDER & MOULD*

HEPA filter traps 99.97% of particles as small as 0.3 microns.*

REFRESH AIR

Plasmacluster refreshes the air similar to the way nature cleans the environment by emitting a balance of positive and negative ions.

*From that air is drawn through the filter system.

Applicable area : 62m2

Thank you for purchasing the SHARP Air Purifier. Please read this manual carefully. Before using this product, be sure to read the section: “Important Safety Instructions.” After reading this manual, keep it in a convenient location for future reference.

For your reference, we recommend to keep this manual in the place where you can read at any time.

IMPORTANT SAFETY INSTRUCTIONS

.....E-2

PART NAMES ...........................................

E-4

FILTER INSTALLATION ...........................

E-6

OPERATION .............................................

E-7

MAINTENANCE........................................

E-8

TROUBLESHOOTING............................

E-10

SPECIFICATIONS...................................

E-11

E-1

ENGLISH

OP_FU-A80A-EN+HK.indb 1

 

 

9/21/11 2:42:58 PM

 

 

 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using the unit.

When using electrical appliances, basic safety precautions should be followed, including the following:

WARNING - To reduce the risk of electric shock, fire or injury to persons:

Connect the power plug to a dedicated electrical outlet for 220V, 50Hz.

Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loosened.

Periodically remove dust from the power plug.

Do not use an extension cord.

Do not insert fingers or any objects into the air inlet or air outlet.

Do not unplug by pulling on cord. To unplug, grasp the plug.

Do not handle plug or unit with wet hands.

Unplug the electrical cord before performing any maintenance.

If the power cord is damaged, it must be replaced by the manufacturer, its service agent, a Sharp authorized Service Centre or qualified person in order to avoid a hazard.

Do not use near flammable gases and material such as insecticides, fragrances, and lit cigarettes.

Do not use in humid place such as bathrooms.

Contact the nearest Sharp Approved Service Centre for any problems, adjustments, or repairs.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.

NOTE - Radio or TV Interference

If this air purifier causes interference to radio or television reception, try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the unit and radio/TV receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contact the dealer or an experienced radio/TV technician for help.

E-2

OP_FU-A80A-EN+HK.indb 2

 

 

9/21/11 2:43:00 PM

 

 

 

 

 

 

CAUTIONS CONCERNING OPERATION

Do not block the air inlet and air outlet.

 

Do not use the unit near or on hot objects, such as stoves or heaters or radiators.

 

Do not lay the unit down when using.

 

Always hold the handle on both sides of the unit when moving it.

 

 

Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting

 

 

in bodily injury.

 

ENGLISH

Do not use without filters inside the unit.

 

Do not wash and reuse the filter.

 

 

Not only does it not improve filter performance, but also may cause electric shock or malfunction.

 

Clean the exterior with a soft cloth only.

 

 

 

Do not use corrosive cleansers, volatile fluids and/or detergents when cleaning the unit.

 

 

Otherwise, the unit surface may be damaged or cracked.

 

 

In addition, the sensor may malfunction as a result.

 

INSTALLATION GUIDELINES

Avoid locations where curtains, etc., come into contact with air inlet or air outlet. It may become dirty or a malfunction may occur.

Avoid locations where the unit is exposed to condensation, due to rapid temperature changes. (Use under appropriate conditions between 0 - 35˚C room temperature.)

Place on a stable surface with sufficient air circulation.

When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly.

Do not use in locations where greasy or oily smoke is generated (such as in a kitchen, etc.). The unit surface may crack or the sensor may malfunction as a result.

FILTER GUIDELINES

Follow the instructions to handle carefully and keep maintenance.

Do not install any other type of filters.

60cm or more

far away

 

as possible

far away

 

as possible

Distance from wall

E-3

OP_FU-A80A-EN+HK.indb 3

 

 

9/21/11 2:43:01 PM

 

 

 

 

 

 

PART NAMES

ILLUSTRATIVE DIAGRAM

1

3 2 4

5

 

6

7

BACK

8

9

10

1 Air Outlet

2Air Inlet

3Handle

4 Main Unit

5 HEPA Filter

6Active Carbon Deodorizing Filter

7Dust Sensor

8Date Label

9Power Cord

10 Plug

E-4

OP_FU-A80A-EN+HK.indb 4

 

 

9/21/11 2:43:03 PM

 

 

 

 

 

 

CONTROL PANEL

11

12

13

14

15

16

17

18

11SHOWER Button /

SHOWER Indicator Light (green)

12Plasmacluster ON / OFF Button / Plasmacluster ON / OFF Indicator Light (green)

13CHILD LOCK Button /

CHILD LOCK Indicator Light (green)

14CLEAN SIGN

The colour changes according to the air condition.

Green

 

 

Yellow

 

Red

 

 

 

Clean

 

 

 

 

Dirty

 

 

 

 

 

 

 

 

15Plasmacluster Indicator Light (blue)

16FAN SPEED Indicator Light (green)

17FAN SPEED Button

18POWER Button

E-5

ENGLISH

OP_FU-A80A-EN+HK.indb 5

 

 

9/21/11 2:43:05 PM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FILTER INSTALLATION

installation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unplug the electrical cord before

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To maintain the quality of the filters, they are packed in plastic bags and installed in the main unit. Be sure to remove the filters from the plastic bags before operating the unit.

1 Remove the front Panel.

Gently grip the bottom of the front panel and remove it by pulling the bottom gently towards you. Then move upward to remove the front panel.

2 Remove the plastic bags.

3 Place the filters accordingly.

Follow below picture, install the filters in order.

HEPA Filter (white)

Active Carbon Deodorizing Filter (black)

E-6

4

5

Fix the Front Panel.

Fix the Front Panel by hooking it into the top of the unit. Swing panel in by pushing gently until the panel snaps into place.

Record the date when you start or replace the filters.

OP_FU-A80A-EN+HK.indb 6

 

 

9/21/11 2:43:05 PM

 

 

 

 

 

 

SHARP FU-A80A installation Guide

OPERATION

 

 

 

 

3

Press

to start / stop.

1 Unless the power cord has been unplugged,

the operation starts in the previous mode it was operated in.

2 Press to select fan speed.

MAX

AUTO mode

*The air purifier operates the airflow speed automatically according to the indoor air

quality detected by the sensor.

3Press to turn Plasmacluster Ion Mode ON and OFF.

SHOWER Operation

Pressto start SHOWER Mode..

The unit will operate at HIGH fan speed for one hour, then will return to the prior operation.

"SHOWER" mode is effective when you would like to clean quickly.

E-7

 

 

 

 

2

1

CLEAN SIGN

 

ENGLISH

 

 

The Dust sensor automatically monitors indoor air quality.The CLEAN SIGN light will change accordingly.

Green

Yellow

Red

Clean

 

Dirty

Light Control

Press for 3 seconds to select ON/OFF of the Plusmacluster Indicator Light and the CLEAN SIGN.

ONOFF

CHILD LOCK

Press for 3 seconds to select CHILD LOCK.

Operation of the unit display will be locked.

To cancel the CHILD LOCK mode, press again for 3 seconds.

OP_FU-A80A-EN+HK.indb 7

 

 

9/21/11 2:43:09 PM

 

 

 

 

 

 

Loading...
+ 19 hidden pages