Sharp Aquos Zeta, SH-04H Instruction Manual

SH-04H

INSTRUCTION MANUAL

’16.5

Introduction

SH-04H
(includes warranty)

Quick Start Guide
(in Japanese only)

Notes on usage
(in Japanese only)

Thank you for purchasing “SH-04H”.
Be sure to read this manual before and during use to ensure proper operation.

Checking operation method

Quick Start Guide (Basic package)
(in Japanese only)

This guide describes part names and functions.

User's Manual (App of the handset)
(in Japanese only)

This manual describes detailed guidance and
operations of functions.
In the home screen, [R]/[Instruction Manual]

User's Manual (in PDF format)

This manual describes detailed guidance and
operations of functions.
Download from the DOCOMO website

(https://www.nttdocomo.co.jp/english/support/

trouble/manual/download/index.html)

※ The URL and contents are subject to change without

prior notice.

The screens and illustrations in this manual are shown as

examples. The actual screens and illustrations may differ.

The explanations in this manual are based on the case when

the home app is docomo LIVE UX and the setting of kisekae is
[White]. If you change the home app, operation procedures
etc. may be different from the explanations of this manual.

Note that “SH-04H” is referred to as “handset” in this manual.
This manual refers to microSD Card, microSDHC Card or

microSDXC Card as “microSD Card” or “microSD”.

Reproduction of this manual in part or in whole without prior

permission is prohibited.

The contents of this manual are subject to change without

prior notice.

Basic package

TV antenna cable SH01

For optional parts (sold separately) compatible with the handset,

refer to the DOCOMO website.

(https://www.nttdocomo.co.jp/product/option/) (in Japanese only)

Contents

Using the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Precautions (ALWAYS FOLLOW THESE DIRECTIONS). . . .4

Handling precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Waterproof/Dustproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Before Using the Handset

Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . .14

docomo nano UIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Turning power on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Character entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Changing screen display to English . . . . . . . . . . . . . . . . . . .23

Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Incoming/Charging lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Screen display/Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Recent Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Home applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Confirmation screen at first activation of apps. . . . . . . . . . . .30

docomo LIVE UX

Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

App list screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Installing recommended apps . . . . . . . . . . . . . . . . . . . . . . . .34

Backing up/Restoring the home screen. . . . . . . . . . . . . . . . .35

Displaying all apps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

My magazine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Information on apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Call

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Operation during a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Outgoing/Incoming call history . . . . . . . . . . . . . . . . . . . . . . .39

Voice/Answering memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Call settings/Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Mail/Web Browser

docomo mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

SMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

™

Gmail

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Early Warning “Area Mail” . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Apps

dmenu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

dmarket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Play Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Osaifu-Keitai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

TV (Full-Seg/1Seg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

SHCamera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Album . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Media Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

GPS/Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

KARADA MATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

SH tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

docomo backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Handset Settings

Setting menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Sound & notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Wallpaper & display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Useful . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

EMOPA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Battery & energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Storage & USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Data usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

docomo service/cloud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Lock & security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Language & input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Backup & reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

™

Google

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Date & time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

About phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

File Management

Storage structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Contents Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Data Communication

Bluetooth® function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

NFC communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

1

Contents/Precautions

External Device Connection

PC connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Printing/Saving by print service . . . . . . . . . . . . . . . . . . . . . . .84

Home network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

USB host function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Wireless output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Cooperating with Blu-ray Disc recorder. . . . . . . . . . . . . . . . .85

VPN (Virtual Private Network) . . . . . . . . . . . . . . . . . . . . . . . .86

International Roaming

Outline of international roaming (WORLD WING). . . . . . . . .87

Available services overseas . . . . . . . . . . . . . . . . . . . . . . . . .87

Before use overseas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Settings for use overseas . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Making/Receiving a call in your country of stay . . . . . . 88

Setting international roaming . . . . . . . . . . . . . . . . . . . . 89

Checking after homecoming . . . . . . . . . . . . . . . . . . . . 89

Appendix/Index

Troubleshooting (FAQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Anshin Enkaku Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Warranty and After-Sales Service . . . . . . . . . . . . . . . . . . . . .93

Software update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

Main specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Specific Absorption Rate (SAR) of Mobile Phones . . . . . . . .96

Export Administration Regulations . . . . . . . . . . . . . . . . . . . .98

Intellectual Property Right . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Unlocking SIM lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

2

Contents/Precautions

Using the handset

The handset supports LTE, W-CDMA, GSM/GPRS and wireless

LAN systems.

Because the handset relies on radio signals, it cannot be used in

a place with no signal (such as tunnels, underground or in
buildings), in places with a weak signal or outside the LTE
service area or FOMA service area. You may not use the
handset in the upper floors of a building even with no
obstructions in sight. There may also be times when the signal is
strong and you are not moving but the call is interrupted.

Because the handset uses radio waves, it is possible for a third

party to listen in on a conversation. However, since the LTE,
W-CDMA and GSM/GPRS systems automatically apply a private
call feature to every call, a third party that tries to listen in only
hears noise.

The handset converts conversations into a digital signal and

sends it to the other party over the radio. If the signal cannot be
reconverted properly by such as moving to an area with a weak
signal, the voice may not be heard correctly.

Take notes of information (e.g. the phonebook, calendar, note,

voice memo, answering memo) stored on the handset or save
the information to external memory devices such as microSD
Cards and PCs periodically. DOCOMO shall not be liable for any
loss of content due to a failure, repair, model change or other
handling of the handset.

As with PCs, some user-installed apps etc. may disrupt the

stability of your handset performance or unexpectedly transmit
information via the Internet causing improper use of your location
information, personal information stored on the handset, etc.
Therefore, verify the supplier and operating conditions of the
apps etc. to be used before using them.

The handset supports the FOMA Plus-Area and the FOMA

HIGH-SPEED Area.

When the available space on the microSD Card or the handset is

insufficient, apps in use may not work properly. In this case,
delete saved data.

The handset does not support connection to i-mode website

(program), i-appli, etc.

The handset does not support providers other than sp-mode,

mopera U and Business mopera Internet.

In the home screen, [R]/[Settings]/[Profile] to check your

phone number (own number).

The handset does not support Public Mode (Drive Mode).
Setting the handset to the manner mode does not mute sounds

(camera shutter sound etc.) other than the ringtone, operation
sound, and various notification sounds.

The handset automatically performs communication for some

functions, for example, to synchronize data, check the latest
software version or maintain connection with the server. Also,
making a communication with large-volume data such as
downloading apps or watching videos will lead to higher packet
communication charges. Subscription to Packet Pack/flat-rate
packet communication services is highly recommended.

Even while the Wi-Fi connection is set, packet communication

charges may be incurred depending on the app and service you
use.

Software on the handset can be updated to up-to-date status

(nP. 94 “Software update”).

For details on software version of your handset nP. 78 “About

phone”

New functions may be added to the handset or the operation

method may change by upgrading the OS version. Check the
DOCOMO website for the latest information on these additions
and changes.

If the OS is upgraded, some apps used in the previous OS

version may not be available or some unintended bugs may
occur.

Secure the security of the handset by setting Screen lock in case

you lose it (nP. 73 “Lock & security”).

If your handset is lost, change your password for each account

using a PC to prevent other persons from using Google services
such as Gmail and Google Play

Apps and their service contents are subject to change without

prior notice.

Read the terms of service of Google Inc. for details on Google

services. Also, read each terms of service for details on other
web services.

If the terms of service etc. is displayed, follow the instructions on

the screen and operate.

Subscription to Packet Pack/flat-rate packet communication

services is highly recommended to use tethering.

For details on usage fees etc., refer to the DOCOMO website.
The display is manufactured using high-precision technology, but

it may contain dots that fail to light or that remain permanently lit
on some areas. This is a characteristic of display and not a
malfunction.

The battery is built into the handset and you cannot replace it by

yourself.

Note that DOCOMO shall not guarantee operation of

commercially available optional parts.

™

, and services such as SNS.

3

Contents/Precautions

Precautions (ALWAYS FOLLOW

Danger

Warning

THESE DIRECTIONS)

Before use, read these “Precautions” carefully and use your

handset properly.
Keep this manual in a safe place for future reference.

These precautions contain information intended to prevent bodily

injury to the user and to surrounding people, as well as damage
to property, and must be observed at all times.

The following symbols indicate the different degrees of injury
or damage that may occur if information provided is not
observed and the handset is used improperly.

This symbol indicates that

Danger

Warning

Caution

The following symbols indicate specific directions.

Indicates a
prohibited action.

Indicates not to
disassemble the
device.

Indicates not to use
the device near
water or get it wet.

“Precautions” is explained in the following six sections.

Handling the handset, adapters, docomo nano UIM card and TV

antenna cable (general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 4

Handling the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 5

Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 6

Handling docomo nano UIM card . . . . . . . . . . . . . . . . . . . . . P. 7

Handling near electronic medical equipment . . . . . . . . . . . . P. 7

Material list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 8

“death or serious bodily injury
may directly and immediately
result from improper use”.

This symbol indicates that
“death or serious bodily injury
may result from improper use”.

This symbol indicates that
“minor injury and/or property
damage may result from
improper use”.

Indicates not to
handle the device
with wet hands.

Indicates that
instructions
specified are
compulsory (must
be followed).

Indicates that the
power cord must be
unplugged from the
outlet.

Handling the handset, adapters, docomo
nano UIM card and TV antenna cable
(general)

Do not use, store or leave the equipment in
locations subject to high temperatures or
accumulation of heat (near a fire or heating unit, in
a kotatsu or bedding, under direct sunlight, inside a
vehicle on a hot day, etc.).

May cause fires, burns, bodily injury, electric shock, etc.

Do not place the equipment inside cooking
appliances such as microwave ovens and induction
cookers or high pressure vessels such as pressure
cookers, or near them.

May cause fires, burns, bodily injury, electric shock, etc.

Do not sprinkle sand, soil or dirt on the equipment
or put the equipment directly on it. Also, do not
touch the equipment when sand etc. is adhering to
your hand.

May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness/
dustproofness.
nP. 11 “Waterproof/Dustproof”

Do not charge the equipment while it is wet with
liquids such as water (drinking water, sweat,
seawater, pet urine, etc.).

May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
nP. 11 “Waterproof/Dustproof”

Do not attempt to disassemble or modify the
equipment.

May cause fires, burns, bodily injury, electric shock, etc.

Do not get the equipment wet with liquids such as
water (drinking water, sweat, seawater, pet urine,
etc.).

May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
nP. 11 “Waterproof/Dustproof”

Do not allow liquids such as water (drinking water,
sweat, seawater, pet urine, etc.) to get inside the
charger terminal or external connection jack.

May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
nP. 11 “Waterproof/Dustproof”

Use only optional parts specified by NTT DOCOMO.

May cause fires, burns, bodily injury, electric shock, etc.

Do not subject the equipment to strong force,
impacts or vibration such as letting it fall, stepping
on it or throwing it.

May cause fires, burns, bodily injury, electric shock, etc.

Do not allow conductive materials (such as metal
objects and pencil lead) to come into contact with
the charger terminal or external connection jack or
dust to get inside it.

May cause fires, burns, bodily injury, electric shock, etc.

4

Contents/Precautions

Do not cover or wrap the equipment with bedding

Caution

Danger

Warning

etc. when using or charging.

May cause fires, burns, etc.

If charging is not completed after the specified
charging time, stop charging.

May cause fires, burns, bodily injury, etc. because of
overcharging.

Be sure to turn off the handset and not to charge
the battery in locations where flammable gas may
be generated such as gas stations and where dust
is generated.

May cause explosions, fires etc. if using the equipment in
location where flammable gas etc. is generated.
To use Osaifu-Keitai in locations such as gas stations, be
sure to turn off the power in advance (If NFC/Osaifu-Keitai
lock is set, disable the lock before turning off the power).

If any trouble such as an unusual odor, unusual
noise, smoking, overheating, discoloration or
deformation is found during use, charge or storage,
follow the instructions below.
Unplug the power plug from the outlet or

cigarette lighter socket.

Turn off the handset.

May cause fires, burns, bodily injury, electric shock, etc. if
you do not follow the instructions above.

Do not use a damaged equipment.

May cause fires, burns, bodily injury, etc.

Do not leave the equipment on unstable surfaces,
such as on a wobbly table or sloped surface. Be
very careful while the vibrator is set.

May fall and cause injury etc.

Do not use or store the equipment in locations that
are subject to humidity, dust or high temperatures.

May cause fires, burns, electric shock, etc.
Refer to the following for details on waterproofness/
dustproofness.
nP. 11 “Waterproof/Dustpr oof”

If being used by a child, have a guardian teach him/
her the proper handling procedures and do not
have him/her use it improperly.

May cause bodily injury etc.

Do not place the equipment where the young
children can reach it.

A young child may swallow the equipment, or suffer bodily
injury, electric shock, etc.

Be careful when using the handset continuously for
a long time or charging because it may become
warm. Also, be careful not to touch it
unintentionally for a long time when you fall asleep
etc.

The handset or adapter may become warm when using an
app, a call, data communication, watching TV or video, etc.
for a long time or charging.
Directly touching a warmed part for a long time may cause
redness, itching, rashes, low-temperature burns, etc. on
your skin depending on your constitution or health condition.

Handling the handset

Do not throw the handset into a fire or heat it.

May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
battery.

Do not apply excessive force on the handset such
as puncturing it with a nail (sharp object), hitting it
with a hammer (hard object) or stepping on it.

May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
battery.

If the substance etc. inside the internal battery
comes into contact with your eyes, do not rub your
eyes but immediately rinse your eyes with clean
water. Then seek prompt medical treatment.

May result in loss of eyesight etc. because of the substance
etc. inside the internal battery.

If the substance etc. inside the display comes into
contact with your eyes or mouth, immediately rinse
the contacted area with clean water. Then seek
prompt medical treatment.

May result in loss of eyesight, sick, etc. because of the
substance etc. inside the display.

Do not point the illuminated light directly at
someone's eyes. Especially when you use it for
young children, keep sufficient distance from them.

Do not use Mobile light near people's faces. Eyesight may
be temporarily affected leading to accidents etc.

Do not illuminate or emit the mobile light at anyone
driving a car or other vehicles.

May prevent a driver from driving safely and cause a traffic
accident etc.

Do not watch the screen which is flashing
repeatedly for a long time.

May cause spasm or loss of consciousness.

Do not allow water or other liquids (drinking water,
sweat, seawater, pet urine, etc.), metal, flammable
material or other foreign object to enter the docomo
nano UIM card slot or microSD Card slot on the
handset.
Also, do not insert the docomo nano UIM card or
microSD Card in the wrong place or wrong side.

May cause fires, burns, bodily injury, electric shock, etc.

Do not expose the camera lens to direct sunlight
etc. for an extended period.

May cause fires, burns, bodily injury etc. because of the
light-collecting mechanism of the lens.

Turn off the handset or set it to Airplane mode
before going aboard an airplane.

Since using the handset on airplanes is restricted, follow the
instructions given by the respective airlines.
May interfere with the operation of electronic devices
installed on the airplane.
If you commit a prohibited act while using the handset on an
airplane, you may be punished by law.

5

Contents/Precautions

Follow the instructions given by the respective

Caution

Warning

medical facility regarding the use of the handset in
a hospital.

Turn off the handset in areas where the use of mobile
phones is prohibited.
May interfere with the operation of electronic devices and
electronic medical equipment.

Keep the handset away from the ears during a call
in which hands-free is set, while the ringtone is
ringing, during stand-by, etc.
When you attach the earphone/microphone etc. to
the handset to play games, video/music, etc., do
not make the volume too loud.

Excessively high volume or using the handset continuously
for a long time may damage your hearing etc.
Also, it may prevent you from hearing ambient sounds and
cause an accident.

If you have a weak heart, take extra precautions
when setting functions such as the vibrator and
ringtone volume for incoming calls.

May have harmful effects on your heart.

If you are using electronic medical equipment etc.,
contact the respective manufacturer or dealer to
check whether the operation of the equipment is
affected by signals.

May interfere with the operation of electronic medical
equipment etc.

Turn off the handset near high-precision electronic
devices or devices that use weak electronic
signals.

May interfere with the operation of electronic devices.

※ Take particular care with the following devices

Hearing aids, implanted cardiac pacemakers, implanted
cardioverter-defibrillators, other electronic medical
equipment, other equipment controlled by electronic signals,
etc. If you use an implanted cardiac pacemaker, implanted
cardioverter-defibrillator or other electronic medical
equipment, contact the respective manufacturer or dealer to
check whether the operation of the equipment is affected by
signals.

If the display part or camera lens is damaged, be
careful of broken glass and the exposed inside of
the handset.

May cause burns, bodily injury, electric shock, etc. if you
touch the broken or expose d parts.

If the internal battery leaks or emits an unusual
odor, immediately stop using the handset and
move it away from any naked flames or fire.

The battery fluid is flammable and could ignite, causing a
fire, explosion, etc.

Do not allow a pet etc. to bite the handset.

May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
internal battery.

If the display is broken and the internal substance
etc. then leaks, do not get it on your skin (face,
hands, etc.), clothes, etc.

May result in loss of eyesight or harm to your skin etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.

Do not dispose of the handset in ordinary garbage.

May cause fires, burns, bodily injury, etc. because of
catching fire. Also, may damage to the environment. Take
the unnecessary handset to a sales outlet such as a
docomo Shop or follow the instructions by a local institution
that handles used handsets.

If the substance etc. inside the internal battery
leaks, do not get the liquid on your skin (face,
hands, etc.).

May result in loss of eyesight, damage to your skin etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.

If you use the handset in a vehicle, contact the
vehicle manufacturer or dealer to check whether
the operation of the vehicle is affected by signals.

May interfere with the operation of electronic equipment in
some vehicle models. In this case, stop using the handset.

If any trouble on your skin is occurs due to using
the handset, immediately stop using it and seek
medical treatment. Use of the handset may cause
itching, rashes, eczema, etc. depending on your
constitution or health condition.

For details on materials of each part nP. 8 “Material list”

Make sure that there is no metal (a blade of cutter,
staple, etc.) on the handset because the earpiece
section, speaker section and back camera section
contain parts that generate magnetic waves.

May cause bodily injury etc. because of the adhered object.

Look at the display in a well-lit place, keeping a
certain distance.

Eyesight may be weakened etc. if you look at it in a dark
place or closely.

Handling adapters

Do not use if the cord of the adapter is damaged.

May cause fires, burns, electric shock, etc.

Do not swing the handset by its strap etc.

May hit you or others around you, resulting in an accident
such as bodily injury.

For using a motion sensor and geomagnetic
sensor, check the safety around, hold the handset
and do not swing it more than necessary.

May cause an accident such as bodily injury.

Never use the adapter in humid locations such as a
bathroom.

May cause fires, burns, electric shock, etc.

The DC adapter should only be used in negative
grounded vehicles. Never use it in positive
grounded vehicles.

May cause fires, burns, electric shock, etc.

Do not touch adapters if you hear thunder.

May cause electric shock etc.

6

Contents/Precautions

Do not short-circuit the charger terminal when

Caution

Caution

Warning

connected to an outlet or cigarette lighter socket.
Also, do not allow any part of your body (hands,
fingers, etc.) to come into contact with the charger
terminal.

May cause fires, burns, electric shock, etc.

Do not place heavy objects on the cord of the
adapter or apply excessive force on it such as
pulling it.

May cause fires, burns, electric shock, etc.

When plugging/unplugging an AC adapter into/from
the outlet, do not allow metallic straps or other
metallic objects to come into contact with the
prongs of the plug.

May cause fires, burns, electric shock, etc.

Do not connect the voltage converter for overseas
travel (travel converter) to the AC adapter.

May catch fire, or cause overheat, electric shock, etc.

Do not apply excessive force on the connection
part with the adapter connected to the handset.

May cause fires, burns, bodily injury, electric shock, etc.

Do not handle the cord, charger terminal or power
plug of the adapter with wet hands.

May cause fires, burns, electric shock, etc.

Always use the specified power supply and voltage.
When using overseas, use the AC adapter that is
available overseas.

Using the incorrect power supply and voltage may cause
fires, burns, electric shock, etc.
AC adapter: 100V AC (Connect only with a household AC
outlet)
AC adapter available overseas: 100 to 240V AC (Connect
only with a household AC outlet)
DC adapter: 12/24V DC (for negative grounded vehicles
only)

If you replace the fuse in the DC adapter, always
replace it with a specified fuse.

May cause fires, burns, electric shock, etc. if you use the
fuse other than specified one. Refer to the respective
manuals for information on specified fuses.

Wipe off any dust on the power plug.

May cause fires, burns, electric shock, etc. if you use the
power plug with dust adhering.

Fully plug the adapter into the outlet or cigarette
lighter socket.

May cause fires, burns, electric shock, etc. if you do not
insert it securely.

Always grasp the adapters when unplugging the
power plug from the outlet or cigarette lighter
socket. Do not apply excessive force on it such as
pulling the cord of the adapter.

May cause fires, burns, electric shock, etc. since the cord of
the adapter is damaged by pulling it.

When plugging/unplugging an adapter into/from
the handset, plug/unplug it straightly toward the
terminal to connect, not applying excessive force
on it such as pulling the cord.

May cause fires, burns, bodily injury, electric shock, etc. if
you do not plug/unplug it correctly.

If the charger terminal is deformed such as bending
it, immediately stop using. Also, do not use the
deformed one by returning it to the original shape.

May cause fires, burns, bodily injury, electric shock, etc.
because of short circuit of it.

Unplug the power plug of the adapter from the
outlet or cigarette lighter socket when not using.

May cause fires, burns, bodily injury, electric shock, etc. if
you leave the power plug with it plugged into the outlet or
cigarette lighter socket.

If water or other liquids (drinking water, sweat,
seawater, pet urine, etc.) enter the equipment,
immediately remove the power plug from the outlet
or cigarette lighter socket.

May cause fires, burns, electric shock, etc.

Always unplug the power plug from the outlet or
cigarette lighter socket before cleaning the
equipment.

May cause fires, burns, electric shock, etc. if you do not
unplug it.

Do not touch the adapter for a long time when
connected to an outlet or cigarette lighter socket.

May cause burns etc.

Handling docomo nano UIM card

Be careful with the cutting surface not to injure any
part of your body such as fingers when handling
the docomo nano UIM card.

May cause bodily injury etc.

Handling near electronic medical equipment

If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
handset at least 15 cm away from your implant.

Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.

Patients receiving medical treatment away from a
medical facility (e.g. home treatment) who are using
electronic medical equipment other than implanted
cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers etc. for information
regarding the effects of signals on the equipment.

Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.

If there is any chance that the distance between the
handset and a person closest to you may get
shorter than 15 cm such as when you cannot freely
move around, set the handset not to emit radio
wave in advance (by setting Airplane mode, turning
the power off, etc.).

Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.

7

Contents/Precautions

Follow the instructions given by the respective
medical facilities regarding the use of the handset
on their premises.

May have harmful effects on the operation of the electronic
medical equipment.

Material list

Handset

Part Material/Surface treatment

Display side

Back

Exterior (Metal section) Aluminum/Anodizing

Exterior (Resin section)

Grip sensor Acryl/Unglazed

Incoming/Charging lamp PC resin/Unglazed

Power key Aluminum/Anodizing

Volume up/down key Aluminum/Anodizing

Fingerprint sensor Epoxy resin/Hard coating

Camera panel Reinforced glass/AR coating

Decoration of camera Aluminum/Anodizing

Earpiece (Receiver) mesh
(Handset color White)

Earpiece (Receiver) mesh
(Handset color Black, Green)

Speaker mesh

Surrounding area of earphone/
microphone terminal

External connection jack (Metal
section)

External connection jack (Resin
section)

Surrounding area of external
connection jack

Docomo nano UIM Card and
microSD Card cover

Tab, Hinge section of docomo
nano UIM Card and microSD
Card cover

Gasket of docomo nano UIM
Card and microSD Card cover

docomo nano UIM card slot SUS

microSD Card slot SUS/Ni plating

Tray for inserting docomo nano
UIM card

IMEI plate PET resin

TV antenna cable SH01

Part Material/Surface treatment

Earphone/Microphone terminal
(Resin section)

Reinforced glass/Antifouling
coating

PC resin + Acrylic resin/Hard
coating

PA resin (With glass)/
Unglazed

Polyester resin/Aluminum
coating, Water repellent
coating

Polyester resin/Water
repellent coating

Polyester resin/Water
repellent coating

PA resin (With glass)/
Unglazed

Copper + SUS/Gold plating, Ni
plating

PA resin

PA resin (With glass)/
Unglazed

PC resin/Hot stamping, Hard
coating

Elastomer resin

Silicon rubber

POM resin

Elastomer resin

Earphone/Microphone terminal
(Metal section)

Cord Elastomer resin

Plug (Resin section)

Plug (Metal section) Ni base, Brass/Gold plating

Part Material/Surface treatment

Ni base, Brass/Gold plating

Elastomer resin, PP resin,
POM resin

Handling precautions

General notes

SH-04H is waterproof/dustproof, however, do not allow

liquid such as water (drinking water, sweat, seawater, pet
urine, etc.) and foreign object such as dust to get inside the
handset and do not allow them to adhere to accessories or
optional parts.

The adapter, docomo nano UIM card and TV antenna cable are not
waterproof/dustproof. Do not use in humid or steamy areas such as
bathrooms and avoid exposing to rain and other forms of moisture. If
they are carried close to the skin, perspiration may cause internal
components to corrode and result in malfunction. Note that if a
problem is found to be due to moisture, the handset and parts are not
covered by warranty and in some cases may be irreparable. Even
when repairs are possible, repair charges will be incurred, since the
damage is not covered by warranty.

Clean only with a soft and dry cloth (such as the type used

for eyeglasses).

･ Forceful rubbing of the display with a dry cloth etc. may scratch its

surface.

･ Water drops, dirt, etc. left on the display may cause stains to form

on its surface.

･ Never use chemicals such as alcohol, thinners, benzene or

detergents, as these agents may erase the printing or cause
discoloration.

Occasionally clean terminals with a dry cotton swab etc.

Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.

Do not place the equipment near an air conditioning vent.

Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.

Do not apply excessive force on the handset when using it.

Carrying the equipment in a tightly packed bag or sitting on it put in
your pocket may cause damage to the display, internal components,
internal battery, etc. or result in a malfunction.
Keeping an external connector device plugged into the external
connection jack may cause damage or a malfunction.

Do not rub or scratch the display with metal etc.

May scratch it and cause a malfunction or damage.

Read the respective user's guides supplied with supported

optional parts carefully.

Notes about the handset

Do not forcefully press the surface of the touch panel or

operate with a pointed object such as a fingernail, ballpoint
pen or pin.

May damage the touch panel.

Avoid using the handset in extremely high or low

temperatures.

Use the handset within the range of a temperature between 5°C and
35°C and a humidity between 45% and 85%.

Using the handset close to land-line phones, TVs, radios,

etc. may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.

8

Contents/Precautions

Back up to the external memory card, PC, cloud, etc. or

keep a separate memo noting information stored on the
handset.

DOCOMO shall not be liable for any loss of content.

Do not drop or otherwise subject the handset to severe

impact.

May cause a malfunction or damage.

When connecting an external connector device to the

external connection jack or earphone/microphone terminal,
do not put it in obliquely and do not pull it while it is
plugged in.

May cause a malfunction or damage.

The handset becomes warm during use or charging but this

is not a malfunction.

Do not leave the camera in direct sunlight.

May cause discoloration or burn-in of pi xels.

Use the handset with the docomo nano UIM Card and

microSD Card cover closed.

Liquid such as water (drinking water, sweat, seawater, pet urine, etc.)
or foreign object such as dust may get inside and cause a
malfunction.

Do not give a strong impact on the fingerprint sensor or

scratch the surface.

May cause not only malfunction of the fingerprint sensor but also
disabling authentication.

Clean the fingerprint sensor with a soft and dry cloth (such

as the type used for eyeglasses).

When the fingerprint sensor is dirty or gets wet on the surface, it
cannot read the fingerprint and may degrade the authentication
performance or cause an error.

While using a microSD Card, do not remove the card or turn

off the handset.

May cause data loss or a malfunction.

Never place a magnetic card near the handset.

The stored magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.

Never place magnetized items near the handset.

Putting highly magnetized items closer may cause an error.

The internal battery is a consumable product.

Though the battery life varies with use, change the battery if the
battery life is extremely short even after being fully charged. For
details on replacing the internal battery, contact the number listed in
“Repairs” (in Japanese only) on the last page or a repair counter that
DOCOMO specifies.

Charge battery in areas where ambient temperature is

between 5°C and 35°C.

The battery life depends on the usage and deterioration of

the battery.

Depending on usage, the internal battery may swell as it

approaches the end of its usable life.

Note that if a problem is found to be due to swelling of the internal
battery, the handset and parts are not covered by warranty and in
some cases may be irreparable. Even when repairs are possible,
repair charges will be incurred, since the damage is not covered by
warranty.

Avoid the following situations when the handset is stored.

 Storage with the internal battery fully charged (immediately after

charging is completed)
 Storage with no battery level (cannot turn the handset on)
May lower the performance or shorten the usable life of the internal
battery.
Approximately 40% is recommended as the proper battery level for
storage.

The following is the type of the internal battery built into the

handset.

Label Battery type

Li-ion00 Lithium-ion

The surface of the handset uses the aluminum material.

Note that dent and abrasion are easily remained as
aluminum is a soft material.

Notes about adapters

Charge the battery in areas where the ambient temperature

is between 5°C and 35°C.

Do not charge the internal battery in the following locations.

 Areas with high humidity or dust, or in areas exposed to frequent

vibrations

 Close to land-line phones, TVs, radios, etc.

Adapters may become warm during charging but this is not

a malfunction.

Do not use the DC adapter to charge the battery when the

car engine is not running.

May cause the car battery to run down.

When using an outlet with a feature to prevent the plug from

being removed accidentally, follow the instructions in the
outlet user's guide.

Do not subject to strong impacts. Also, do not deform the

charger terminals.

May cause a malfunction.

Notes about docomo nano UIM card

Do not apply unnecessary force when inserting/removing

the docomo nano UIM card.

Customer is responsible for malfunctions arising from

inserting docomo nano UIM card into a different IC card
reader/writer etc.

Always keep IC area clean.
Clean only with a soft and dry cloth (such as the type used

for eyeglasses).

Keep a separate memo and note information stored on the

docomo nano UIM card.

DOCOMO shall not be liable for any loss of content.

To protect the environment, please take any unneeded

docomo nano UIM cards to a sales outlet such as a docomo
Shop.

Do not damage, touch haphazardly or short-circuit the IC.

May cause data loss or a malfunction.

Do not drop or otherwise subject the docomo nano UIM

card to severe impact.

May cause a malfunction.

Never bend the docomo nano UIM card or place heavy

objects on it.

May cause a malfunction.

Do not insert the docomo nano UIM card to the handset with

a label, sticker, etc. attached on the card.

May cause a malfunction.

9

Contents/Precautions

Notes on using Bluetooth function

The handset supports the security function that meets the

Bluetooth specification for security during communication
using Bluetooth functions. However, the security may not
be sufficient depending on the configuration etc. Take care
of the security while making communication using
Bluetooth function.

Even if any leak of data or information occurs while making

communication using Bluetooth function, DOCOMO shall
not be liable for any loss of content.

Radio frequencies

In the home screen, [R]/[Settings]/[About phone]/
[Authentication] to confirm the radio frequencies the
Bluetooth function of the handset uses. The followings are
the descriptions:

① ② ③ ④ ⑤

⑥

① 2.4: This radio equipment uses the 2,400 MHz band.
② FH: The modulation system is the FH-SS system.
③ 1: The estimated coverage distance is 10 m or less.
④ XX: Another modulation system is used.
⑤ 4: The estimated coverage distance is 40 m or less.
⑥ : All radio frequencies between 2,400 MHz and

2,483.5 MHz are used and the frequencies for mobile object

identifiers cannot be avoided.

Cautions on using Bluetooth devices

Bluetooth operates at radio frequencies assigned to the
in-house radio stations for a mobile object identifier that
have to be licensed and are used in production lines of a
factory, specific unlicensed low power radio stations, and
amateur radio stations (hereafter, referred to as “another
radio station”) in addition to industrial, scientific and
medical devices or home electric appliances such as
microwave ovens.

1. Before using the handset, make sure that “another radio

station” is not operating nearby.

2. If radio interference between the handset and “another

radio station” occurs, avoid interference by moving

immediately to another place or “turning off the power”.

3. Contact the number listed in “General Inquiries” on the

last page for further details.

Notes about wireless LAN (WLAN)

Wireless LAN (WLAN) uses radio waves to communicate

information. Therefore, it has an advantage of freely
connecting to the LAN within the service area. On the other
hand, if security setting is not set, it is possible for a
malicious third party to intercept the communication
contents or hack. It is recommended to set security setting
at your own risk and judgement.

Wireless LAN

Do not use wireless LAN near magnetic devices such as electric
appliances or AV/OA devices or in radio waves.
･ Magnetism or radio waves may increase noises or disable

communications (especially when using a microwave oven).

･ When used near TV, radio, etc., reception interference may occur

or channels on the TV screen may be disturbed.

･ If there are multiple wireless LAN access points nearby and the

same channel is used, search may not work correctly.

Radio frequencies

In the home screen, [R]/[Settings]/[About phone]/
[Authentication] to confirm the radio frequencies the
WLAN-installed devices use. The followings are the
descriptions:

① ② ③ ④

⑤

① 2.4: This radio equipment uses the 2,400 MHz band.
② DS: The modulation system is the DS-SS system.
③ OF: The modulation system is the OFDM system.
④ 4: The estimated coverage distance is 40 m or less.
⑤ : All radio frequencies between 2,400 MHz

and 2,483.5 MHz are used and the frequencies for mobile object
identifiers can be avoided.

Available channels for the handset's wireless LAN are between 1 and

13. Note that other channel access points cannot be connected.
Available channels may vary depending on the country.
For use in an aircraft, contact the airline beforehand.

Cautions on using 2.4 GHz devices

WLAN-installed devices operate at radio frequencies
assigned to the in-house radio stations for a mobile object
identifier (radio stations requiring a license) used in
production lines of a factory, specific low power radio
stations (radio stations requiring no license), and amateur
radio stations (radio stations requiring a license) in addition
to industrial, scientific and medical devices or home electric
appliances such as microwave ovens.

1. Before using this device, make sure that the in-house
radio stations for a mobile object identifier, specific low
power radio stations and amateur radio stations are not
operating nearby.

2.

If the device causes harmful radio interference to the
in-house radio stations for a mobile object identifier,
immediately change the radio frequency or stop use, and
contact the number listed in “General Inquiries” on the last
page for crosstalk avoidance, etc. (e.g. partition setup).

3. If the device causes radio interference to specific low
power radio stations for a mobile object identifier or
amateur radio stations, contact the number listed in
“General Inquiries” on the last page for further details.

Cautions on using 5 GHz devices

In the 5 GHz frequency band, three bands of 5.2 GHz/5.3
GHz/5.6 GHz band (W52/W53/W56) are available.

･ W52 (5.2 GHz band/36, 40, 44, 48 ch)
･ W53 (5.3 GHz band/52, 56, 60, 64 ch)
･ W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128,

132, 136, 140 ch)
Using 5.2 GHz/5.3 GHz band wireless LAN (W52/W53)
outdoors is prohibited by the Radio Law.

Voluntary control for radio wave interference

This product satisfies technical requirements based on

VCCI Rules for Voluntary Control Measures and its satisfied
mark is displayed on the electronic nameplate of the
product.

You can see the electronic name plate by operating the product as
follows.
In the home screen, [R]/[Settings]/[About phone]/
[Authentication]

10

Contents/Precautions

FeliCa and NFC reader/writer

The FeliCa, NFC reader/writer and P2P function of the

handset use weak radio waves whose handling does not
require a license of radio station.

The frequency in use is the 13.56 MHz band. When another

reader/writer or P2P function is being used nearby, keep
enough distance from it. Make sure that there is no radio
station using the same frequency band in the nearby area.

For use in an aircraft, contact the airline beforehand. Use of

the function may be restricted in some countries.
Check conditions such as regulations of the country/region
to use the function.

Caution

Never use the handset that is modified. Using a modified

device violates the Radio Law and/or the
Telecommunications Business Law.

The handset follows the regulations regarding the certification of
conformity with technical regulations for specific radio stations etc.
based on the Radio Law and authentication of conformity with
technical regulations for devices etc. based on the
Telecommunications Business Law, and the “Technical Conformity
Mark ” can be displayed on the electronic nameplate of the
handset as a proof. You can see it by operating as follows.
In the home screen, [R]/[Settings]/[About phone]/
[Authentication]
If the screws of the handset are removed and a modification is given
to the inside, the certification of conformity with technical regulations
etc. will become invalid. Never use the handset without the valid
certification etc. Doing so violate s the Radio Law and/or the
Telecommunications Business Law.

Be careful when using the handset while driving a motor

vehicle.

Using the handset in hand while driving is regarded as a punishable
act.
However, the punishment has no application in some cases such as
when rescuing sick and injured people or maintaining public safety.

The FeliCa and NFC reader/writer function of the handset

conform to the domestic radio wave standards. When you
use it overseas, check conditions such as regulations of the
country/region in advance.

Never change the basic software improperly.

This may be regarded as a conversion of software and repairs may be
refused.

Waterproof/Dustproof

SH-04H is waterproof to IPX5*1 and IPX8*2 standards, and
dustproof to IP5X
microSD Card cover is securely closed.

*1 IPX5 means that phone keeps functioning after being subjected

to a jet flow (12.5 liters/min) discharged from a nozzle (inner
diameter: 6.3 mm), from all directions (approximately 3 m from
the handset) for 3 minutes or more.

*2 IPX8 means that SH-04H phone keeps functioning after it is

slowly submerged to depth of 1.5 m in static tap water at room
temperature, left there for approximately 30 minutes and then
taken out.

*3 IP5X means the level of dust protection. Phone keeps

functioning in safety after it is left in the device containing dust
(diameter: 75 μm or smaller) for 8 hours, agitated and then
taken out.

What you can do with waterproof/dustproof
of SH-04H

You can call without using an umbrella in the rain (for rainfall of

approximately 20 mm per hour).

*3

standard if the docomo nano UIM Card and

You can rinse dirt off from the handset. Wash the handset with

low-pressure water flow (6 liters/min or lower and tap water at
room temperature (between 5°C and 35°C)), holding it
approximately 10 cm below faucet or shower head. Wash by
using only your hands, not a brush or sponge, with the docomo
nano UIM Card and microSD Card cover held in position. Drain
the handset before use (nP. 12 “Draining water when the
handset gets wet”).

You can use the handset at a poolside. Do not throw water in a

swimming pool on the handset or soak the handset in the water
of a swimming pool.

Things to keep in mind

To maintain waterproof/dustproof performance, check the
followings.

Securely close the docomo nano UIM Card and microSD Card

cover. Be careful not to apply excessive force on the rubber
gasket when opening and closing.

Make sure that the docomo nano UIM Card and microSD Card

cover is completely closed without floating.

To maintain waterproof/dustproof performance, the handset has

the docomo nano UIM Card and microSD Card cover that allows
you to close securely. Note that opening it forcibly may cause
injuries to your nails, fingers, etc.

For details on how to open/close the docomo nano UIM Card and

microSD Card cover nP. 15 “Inserting docomo nano UIM card”

To maintain waterproof/dustproof performance, replacement of

parts is recommended every 2 years regardless of whether the
handset appears normal or abnormal. DOCOMO replaces the
parts as a chargeable service. Bring the handset to a repair
counter that DOCOMO specifies.

Precautions

When your hands are wet or water/foreign object adheres to the

handset, do not open/close the docomo nano UIM Card and
microSD Card cover.

Close the docomo nano UIM Card and microSD Card cover

securely. Even a fine obstacle (one hair, one grain of sand, tiny
fiber, etc.) put between contact surfaces may allow liquids or dust
to get inside.

If the handset gets wet with water or other liquids with the

docomo nano UIM Card and microSD Card cover opened, the
liquid may get inside causing electric shocks or malfunction. Stop
using the handset, turn off the power and contact a repair
counter that DOCOMO specifies.

The rubber gasket of the contact surface between the main body

and docomo nano UIM Card and microSD Card cover plays an
important role in maintaining waterproof/dustproof performance.
Do not remove or scratch it. Also, prevent dust from adhering to
it.
If the rubber gasket is damaged or deformed, contact a repair
counter that DOCOMO specifies.

Do not insert a pointed object through the docomo nano UIM

Card and microSD Card cover gaps. It may cause damage to the
rubber gasket and allow liquids or dust to get inside.

Do not use the handset underwater (including key operations).

May cause malfunction.

Do not directly apply water flow stronger than allowed (over 6

liters/min). May cause malfunction though SH-04H provides
waterproof performance of IPX5.

11

Contents/Precautions

Do not let the handset get wet with liquids other than water at

Soap/Detergent/
Bath powder

Seawater

Swimming pool

Hot spring Sand/Dirt

To drain water off the
speaker, shake the
handset with the
speaker turned down

To drain water off the
earpiece, shake the
handset with the
earpiece turned down

room temperature (between 5°C and 35°C) or do not soak the
handset in the liquids. If you let the handset get wet with liquids
other than water at room temperature or soak the handset in the
liquids, stop using the handset and wash it with water at room
temperature.

Do not wash the handset in a washing machine etc.
To prevent condensation, do not bring the handset from a cold

place to a warm place without letting the handset warmed to
room temperature.

Never soak the handset in hot spring water or water containing

soap, detergent or bath powder.

Do not soak the handset in hot water, use it in a sauna or apply

hot air (from a hair dryer etc.) to it.

Do not soak the handset in seawater.
Do not put the handset directly on sand/dirt.
If foreign object such as salt water, seawater, drink, seasoning,

food, dirt or soil adheres to the handset, rinse it off immediately.
If it becomes dry and hard, it is difficult to remove it and may
cause damage or malfunction.

Do not leave the handset wet. In cold places, water may freeze

and cause malfunction.

The handset does not float on water.
Do not let the handset fall. It may become scratched and cause

the waterproof/dustproof performance to degrade.

Do not leave water on the mouthpiece, earpiece, speaker,

microphone or earphone/microphone terminal. Such water may
interfere with talking.

Do not poke the mouthpiece, earpiece, speaker, microphone, air

vent, external connection jack, earphone/microphone terminal,
etc. with a pointed object.

Do not insert an earphone/microphone to the handset while the

handset is wet. May cause malfunction.

Accessories and optional parts are not waterproof/dustproof. Do

not use them in rooms where water is regularly in use such as
bathroom, shower room, kitchen or lavatory.

Shake the handset approximately 20 times,

2

securely holding it, until there is no more water
splattering

Softly press the handset against dry and clean

3

cloth etc. to wipe off water remaining in the
grooves of the mouthpiece, earpiece, speaker,
microphone, keys, air vent, external connection
jack, earphone/microphone terminal, strap hole,
etc.

: Pat the opening with cloth etc. to remove water because

there may be any water remaining in the grooves of each
part.

DOCOMO does not guarantee actual operations under all

states. Malfunctions deemed to be caused by inappropriate
operation by the customer are not covered by the warranty.

Draining water when the handset gets wet

When the handset is wet, water may flow out after wiping it off.
Drain the water by following the steps below.

Wipe off water on the handset surface with dry

1

and clean cloth etc.

: If a strap is attached, dry the strap as well.

Wipe off water oozing from the handset with dry

4

and clean cloth etc. and leave it for a while to
dry it

: Water, if any, remaining in the main body may ooze after

wiping off.

: Pat the opening with cloth etc. again to remove water

because you may not be able to hear sounds well if drainage
is insufficient.

12

Contents/Precautions

Charging

Accessories and optional parts are not waterproof/dustproof.
Check the followings before and after charging.

Make sure that there is no water or foreign object on the handset.

If foreign object adheres to the handset, immediately rinse it off.
Also, if the handset is wet or after the handset is wet, adequately
drain it and wipe off water with dry and clean cloth etc. then leave
it for a while to dry it before opening the docomo nano UIM Card
and microSD Card cover.

Warning

Never try to connect the microUSB plug when the handset is
wet or foreign object adheres to the handset.

The AC adapter (sold separately) does not provide waterproof/

dustproof performance though the handset provides them.
Inserting the microUSB plug while the equipment is wet or dirty
may cause short circuit when you charge the battery and lead
to abnormal overheat, malfunction, fires or burns due to water,
foreign object, etc. adhering to the handset or microUSB plug.

Do not touch an AC adapter with your hands wet. May cause

electric shock.

Do not use the AC adapter in a place subject to water. Do not

use it in rooms where water is regularly in use such as
bathroom, shower room, kitchen or lavatory. May cause fires or
electric shock.

13

Contents/Precautions

Before Using the Handset

Part names and functions

1 Docomo nano UIM Card and microSD Card cover
2 docomo nano UIM card slot

The tray for inserting the docomo nano UIM card is stowed.

3 microSD Card slot
4 Grip sensor
5 Incoming/Charging lamp
6 Front camera
7 Proximity sensor (upper part of the display)/Brightness

*1

sensor

The proximity sensor (upper part of the display) detects the

distance to the face and prevents inadvertent operation of
touch panel during a call.

The brightness sensor detects the brightness of the

surrounding area and adjusts the brightness of the backlight.

8 Earpiece
9 Display/Touch panel
a Proximity sensor for Grip Magic (lower part of the display/

*1

back)

Detects the distance to the object and prevents inadvertent

operation of Grip Magic.

b x/y: Volume up/down key

Adjusts the volume in each function.

c H: Power key

Use to turn the power on/off, etc.
Use to turn the display on/off.

d Fingerprint sensor

Use to unlock the touch panel etc. by fingerprint

authentication.

e Back camera
f Mobile light
g Microphone

Use when recording videos.
Use to measure ambient noises for communicating by making

your voices sound clear when using Clear talk.

Use as a mouthpiece during a hands-free call.

h Earphone/Microphone terminal
i a mark

IC card is contained (It cannot be removed).

j Strap hole/Air vent

There is a vent to remove excess air from the handset in the

rear of the strap hole.

k Mouthpiece/Microphone

Use as a microphone when recording videos or talking to

EMOPA.

l External connection jack
m Speaker

Ringtone, music, etc. can be heard from here.
The other party's voice can be heard from here during a

hands-free call.

n LTE/FOMA antenna
o Wi-Fi/Bluetooth antenna
p GPS/TV/Wi-Fi antenna

*1 Do not cover the sensor area with your hand or paste a sticker

etc. on the sensor area. The sensor may not work properly.

*2 If the handset is equipped with a commercially available

corresponding flip cover, you can turn the display on/off by
opening/closing the flip cover. If you close the equipped flip
cover obliquely, the display may not be turned off.

*3 The antenna of back is built into the main body. At sides of the

handset, the metal sections of surface are used as the antenna.
Covering the antenna area with your hand may influence the
quality.

*2

*3

*3

*3

Mobile light

The mobile light may be automatically turned off if you use the

handset for a long time or the handset becomes warm after the
mobile light is turned on. Also, you may not be able to use the
mobile light if the handset is warm.

Microphone

When using functions which support the microphone, do not

cover the hole of the microphone.

Earphone/Microphone

Depending on the type of the earphone/microphone, it may not

be available.

14

Before Using the Handset

docomo nano UIM card

docomo nano UIM card slot (right side)

Hinge section

A docomo nano UIM card is an IC card that records personal
information, such as your phone number.

You cannot use functions such as the phone or packet

communication without inserting a docomo nano UIM card.

In Japan, you cannot call to the emergency number (110, 119 or

118) without inserting a docomo nano UIM card.

A docomo nano UIM card has a security code called PIN code

(nP. 74 “PIN code”).

The handset supports only docomo nano UIM card. If you have a

docomo mini UIM card, UIM or FOMA card, bring it to a docomo
Shop to replace.

Before inserting or removing the docomo nano UIM card, turn off

the power. Hold the handset securely with your hand.

■ Inserting docomo nano UIM card

Open the docomo nano UIM Card and microSD

1

Card cover

: Hook the tip of a finger into the slot and pull out it forward

(1), and then rotate it in the direction of the arrow to open
(2).

Slot

: The docomo nano UIM card slot is at the right side of the

microSD Card slot. When you insert the tray, be careful not
to insert it to the microSD Card slot.

: Do not forcibly insert the tray at an angle or with the wrong

side up. The docomo nano UIM card slot or tray may be
damaged.

Close the docomo nano UIM Card and microSD

5

Card cover

: Stow the hinge section of the docomo nano UIM Card and

microSD Card cover (1) and push the cover in the direction
of the arrow to close it so that gaps are not left between the
handset and the cover (2). When closing it, push securely
like tracing it in the direction of the hinge section (3).

Remove the tray from the docomo nano UIM

2

card slot

: Hook the tip of a finger into the tray to remove it by slowly

pulling it straight out.

Hold the docomo nano UIM card with the IC

3

(gold) side turned up and set it on the tray

Notch

IC (gold)

Insert the tray slowly into the docomo nano UIM

4

card slot

■ Removing docomo nano UIM card

Open the docomo nano UIM Card and microSD

1

Card cover

Remove the tray from the docomo nano UIM

2

card slot

Remove the docomo nano UIM card from the

3

tray

Insert the tray slowly into the docomo nano UIM

4

card slot

Close the docomo nano UIM Card and microSD

5

Card cover

15

Before Using the Handset

Do not allow the docomo nano UIM card or tray to fall when

removing them.

Make sure not to touch or damage the IC (gold) of the docomo

nano UIM card when handling it. Also, note that inserting or
removing the docomo nano UIM card forcibly may damage it or
deform the tray.

Refer to the docomo nano UIM card user's guide for more

information on the docomo nano UIM card.

Do not misplace the docomo nano UIM card once it is removed.

IMEI plate

A plate on which the IMEI number (International Mobile

Equipment Identifier) is printed is stowed near the microSD
Card slot. The IMEI number is required when you contact a
repair counter that DOCOMO specifies, so do not pull it out.

Note that pulling out the IMEI plate forcibly or adding forces on

it may damage the plate.

If you accidentally pull out the IMEI plate, slowly return the IMEI

plate to the original position while taking care not to insert it too
deep.

Charging

The internal battery is not fully charged at the time of
purchase. Be sure to charge the battery before use.

■ Cautions while charging

For details on the estimated charge time nP. 95 “Main

specifications”

The battery can also be charged with the handset turned on

(While charging, the battery icon appears with [w]
superimposed).

Do not charge for a long time with the power left turned on. If the

handset is left turned on after charging is complete, the internal
battery charge level decreases.
In this case, an AC or DC adapter (sold separately) charges the
battery again. However, depending on the time when the
handset is disconnected from the AC or DC adapter, the battery
charge level may be low or the battery may only be usable for a
short time.

If the handset is left for a long time even after the charging is

completed, the battery level may decrease.

When the battery is empty and the handset is being charged, the

charging lamp may not illuminate immediately. However,
charging is in progress.

If the battery empty alert is displayed and the power cannot be

turned on, charge the battery for a while.

While charging, the handset may not be turned on even when the

charging lamp is illuminated in red. Charge longer and try turning
the power on again.

Frequently recharging the battery when its power is still

remaining enough may shorten the usable life of the internal
battery. It is recommended to use the battery to a certain level
(e.g. after the battery level decreases) before recharging.

When the battery becomes warm, charging may automatically

stop even if the battery has not been fully charged. Charging
automatically resumes after the temperature lowers to an
appropriate temperature.

■ Estimated battery life when fully charged

Continuous
talk time

Continuous
stand-by time

TV watching
time

For details on the battery life nP. 95 “Main specifications”

FOMA/3G

Approx. 1,060 min

GSM

Approx. 1,140 min

VoLTE (Voice call)

Approx. 1,520 min

FOMA/3G

At rest: Approx. 590 hr (Preferred network
type: LTE/3G/GSM(Auto))

GSM

At rest: Approx. 500 hr (Preferred network
type: LTE/3G/GSM(Auto))

LTE

At rest: Approx. 560 hr (Preferred network
type: LTE/3G/GSM(Auto))

Full-Seg: Approx. 490 min
1Seg: Approx. 760 min

■ Internal battery usable life

Internal battery is a consumable product. Battery life per charge

is gradually reduced every time the battery is charged.

When battery life per charge is reduced to approximately half of

the default time, this means that the internal battery is
approaching the end of its usable life. In this case, it is
recommended to replace the battery as soon as possible. For
details on replacing the internal battery, contact the number
listed in “Repairs” (in Japanese only) on the last page or a repair
counter that DOCOMO specifies.

If you watch TV etc. while charging for a long time, the usable life

of the internal battery may become shorter than estimated.

■ AC adapter and DC adapter

Refer to user's guide of AC Adapter 05 (sold separately) or DC

Adapter 04 (sold separately).

AC Adapter 05 covers from 100 to 240V AC.
The shape of the plug for the AC adapter is for 100V AC (for

domestic use). To use the AC adapter of 100 to 240V AC
overseas, a conversion plug adapter applicable to your country
of stay is required. Do not use a voltage converter for overseas
travel to charge the battery.

16

Before Using the Handset

Charging with AC adapter/DC adapter

Charging lamp

microUSB plug

Keep side marked
with “B” up

External connection jack

100V AC
outlet

Cigarette
lighter socket

AC adapter DC adapter

Power plug

Power plug

[Read the user's guides of AC Adapter 05 (sold
separately) and DC Adapter 04 (sold separately)]

Following operations describe how to charge with AC Adapter 05

or DC Adapter 04.

Insert the microUSB plug of the AC adapter/DC

1

adapter horizontally into the external
connection jack on the handset with the side
marked with “B” turned up

: Check the direction (front or rear) of the microUSB plug and

insert it horizontally.

When you erect the AC adapter power plug and

2

insert it into an outlet or insert the DC adapter
power plug into a car cigarette lighter socket,
the charging lamp illuminates and charging
starts

When charging is complete, the charging lamp

3

turns off

Remove the AC adapter power plug from the

4

outlet, or remove the DC adapter power plug
from the car cigarette lighter socket

Remove the microUSB plug of the AC adapter/

5

DC adapter horizontally from the external
connection jack

Note that inserting or removing the equipment forcibly may

cause damage to the external connection jack and the
microUSB plug or result in a malfunction.

When using a DC adapter

The DC adapter should only be used in negative grounded

vehicles (12 and 24V DC).

Do not use with the car engine shut off. May drain the car

battery.

The DC adapter fuse is a consumable product. For

replacement, purchase a new fuse at a nearest auto parts
retailer etc.

Refer to the user's guide of DC Adapter 04 for details.

Charging with Micro USB Cable 01

You can charge the handset by connecting the handset to a PC
with Micro USB Cable 01 (sold separately).

For details on connecting to a PC nP. 84 “PC connection”

Turning power on/off

■ Turning power on

H (for at least 2 seconds)

1

: When you turn the power on for the first time, make the initial

settings (nP. 23 “Initial settings”).

■ Turning power off

H (for at least 1 second)/[Power off]

1

■ Turning power off forcibly

You can forcibly turn the power off if the screen does not respond or
the power cannot be turned off.

H (for at least 8 seconds)

1

: Release your finger after the vibrator is activated to turn the

power off.

■ Turning display on/off

The display is turned off when H is pressed or the handset is not
in use for a set length of time.
Press H while the display is turned off to turn it on.

■ Touch panel lock

When the power or the display is turned on, the touch panel is
locked.
Touch [J] to unlock.

Operations in touch panel lock screen

To set/disable the manner mode: y (for at least 2 seconds)
To activate SHCamera: [K]
To activate しゃべってコンシェル (Shabette-Concier): [W]
To activate Clock: Touch the clock
To display the detailed information on notifications: Drag the

clock down

To display the status panel: Drag the status bar down

17

Before Using the Handset

The notifications are displayed in the lock screen of the touch

Menu

panel. You can make settings for displaying of notifications in
[When device is locked] (nP. 66 “Sound & notification”).

If you set [エモパー設定] (EMOPA settings) to ON, various

information delivered by EMOPA is displayed under the clock.
Depending on the information, you can check the related
information or details by touching it twice.
Also, when [エモパーメモ] (EMOPA memo) is ON, you can use

EMOPA memo in the lock screen of the touch panel.
･ When [エモパー設定] (EMOPA settings) is set to ON, Clock is

not activated even if you touch the clock.

･ For details on EMOPA nP. 69 “EMOPA”

■ Flick

Move your finger like sweeping the touch panel in the home screen
etc. to switch pages.

Basic operation

The followings describe basic operations of the handset such
as operations of the touch panel and navigation keys, and
operations for shooting screenshot.

Operation of touch panel

The followings describe the operations to use the display
(touch panel).

Operations may differ depending on the function and screen in

use.

Cautions when using the touch panel

The touch panel is designed to be lightly touched with your

finger. Do not forcefully press with your finger or a pointed
object (fingernail, ballpoint pen, pin, etc.).

In the following cases, the touch panel may not work even if

you touch it. May cause a malfunction.

Operation with a gloved finger
Operation with the tip of a fingernail
Operation with foreign object placed on the operation pad
Operation on the touch panel on which a protective sheet,

sticker, etc. is put

Operation while the touch panel is wet
Operation with fingers wet with sweat, water, etc.
Operation under water

* When [glove mode] is set to ON, you can operate the touch

panel with a glove on (nP. 67 “Wallpaper & display”).

Operations may be interrupted if you touch an area other than a

confirmation screen or the status bar while the confirmation
screen etc. is displayed.

■ Touch

Touch a key or an item displayed on the screen and then release
your finger from it to select or set it.

■ Touch and hold

When you keep your finger on the touch panel, a menu may appear
depending on the function and screen in use.

■ Slide (Swipe)/Drag

Move your finger while keeping it on the touch panel to scroll the
screen or move an icon, a widget, etc. to the desired position.
In addition, when you touch a menu or an item by mistake, move
your finger away from it to cancel the selection.

*

■ Pinch out/Pinch in

You may be able to zoom the screen in/out etc. by putting two
fingers on the touch panel and moving them with putting a distance
between two fingers apart (pinch out)/closer (pinch in) depending
on the function and screen in use.

Operation while using function

■ Navigation keys

Use the navigation keys displayed at the bottom of the screen to
perform the basic operations.

1 {/v: Back key/Close key

Return to the previous screen.
Close the keyboard.

2 |: Home key

Display the home screen.

3 }: Recent Apps key

Display Recent Apps (nP. 29 “Recent Apps”).

■ Using user-aid function

You can quickly activate an app supporting the user-aid function.

Touch and hold [}]

1

: To set an activating app: In the home screen, [R]/

[Settings]/[Apps]/[C]/[Default Apps]/[Assist & voice
input]/[Assist app]/select an app

■ Retrieving menu

When you touch [{]/[z]/[|] etc., slide the left edge of the screen to
the right or touch and hold the screen, functions (menus) available
in that screen appear.

Example: App list screen

18

Before Using the Handset

■ Switching the settings

When a check box etc. is displayed beside the setting item, you can
set it enabled/disabled or ON/OFF by touching it.

Example: Call settings screen, Cellular network settings

[0]: Enabled, [1]: Disabled

[t]: ON, [u]: OFF

screen

■ Vertical/Horizontal display

The screen display is switched when you tilt the handset.
Vertical/Horizontal display may not be switched even if the

handset is turned depending on the screen being displayed.

Vertical/Horizontal display is not switched if the handset is turned

while it is positioned parallel to the ground.

The screen display may not be switched properly when a sound

or a vibration is being activated.

Vertical/Horizontal display may not be switched properly right

after the display or power is turned on.

You can set the display not to automatically switch

(nP. 19 “Grip Magic”, P. 67 “Wallpaper & display”).

Screens may be displayed in the full screen depending on the

app when you switch from vertical display to horizontal display.

Shooting screenshot

Hold H + y down for at least 1 second to shoot the screen
being displayed as an image.

Shot images are saved on the handset memory and you can

check them by using Album etc.

Alternatively, you can shoot the screenshot by using Clip Now

(nP. 68 “Clip Now”).

Data cannot be saved while displaying TV, home network,

e-books, etc.

Data may not be saved completely or partially depending on the

app.

Grip Magic

You can turn the display on, minimize the ringtone volume and
activate the vibrator, etc. using function of Grip sensor or the
proximity sensor by holding the handset.

In the home screen, [R]/[Settings]/

1

[Useful]/[Grip magic]

Set to On

2

Select an item

3

Turn screen on by holding: Set whether to turn the display on

when you hold the handset while the display is turned off.

Volume down for incoming calls: Set whether to minimize the

ringtone volume and activate the vibrator by holding the
handset during an incoming call.

Deterrence rotate screen: Set whether to keep the screen

displayed vertically while holding the handset.

Simple secrecy for incoming calls: Set whether to hide the

other party's name and image until holding the handset when
receiving a call.

Let's Try!: Try functions or check how to use with a video

tutorial by using “Let's Try!”.

Adjustment of Gripsensor: Carry out sensitivity adjustment of

Grip sensor according to the usage condition.

Grip sensor (nP. 14 “Part names and functions”) responds

when you touch both the right and left sides. Hold the handset
with the both sides touched to use Grip sensor since Grip
sensor does not respond when you touch only one side. Also,
when you release your fingers, keep your fingers away from
both sides of the sensor. Letting your fingers remain touching
only one side keeps the sensor responding.

If you set [Grip magic] to On, [View with flip cover] is set to OFF.

[Turn screen on by holding]

If the proximity sensor (upper part of the display) is covered

with a hand, an object, etc., the display cannot be operated by
touching to prevent inadvertent operations although the display
is turned on. Also, the display may be turned off regardless of
the setting of the handset.

The display may not be turned on even when you hold the

handset immediately after the display is turned off by pressing
H.

If the proximity sensor for Grip Magic (lower part of the display/

back) is not covered, hold the handset with tilting it to turn the
display on even when you do not touch Grip sensor.
Depending on the angle or speed, the display may not be turned
on even when you hold the handset.

[Deterrence rotate screen]

This function may not follow the setting depending on the app in

use.

[Simple secrecy for incoming calls]

If you set Hide the name when receiving to [ON] in Suguden

setting, the handset operates according to Hide the name when
receiving.

19

Before Using the Handset

Cautions when using Grip Magic

In the following cases, Grip Magic may not work properly. May

cause a malfunction.

Operation while the handset is equipped with a cover etc.
Operation while the handset is wet
Operation while dirt etc. adheres to the sensor
Operation while strong light shines on the sensor
Adjustment of Gripsensor while touching the sensor
Adjustment of Gripsensor while strong light shines on the

sensor

* Depending on the cover, you may be able to use Grip Magic

with the handset equipped with it.

*

Twist magic

Twist your wrist holding the handset to switch to the previous
app that you have used.

In the home screen, [R]/[Settings]/

1

[Useful]/[Twist magic]

Select an item

2

Turn on/off Twist magic: Set whether to use Twist magic.
Setting to restrict operation: Set apps in which operations of

Twist magic are restricted. Twist magic is not operated while
using the set app.

Let's Try!: Try functions or check how to use with a video

tutorial by using “Let's Try!”.

This function may not work depending on the app in use. Also,

in the following cases, Twist magic is not available.

On horizontal display
In the lock screen
In the home screen
In the status panel
During an incoming call
While Childlock set
While [Screen pinning] function activated
While “Let's Try!” displayed

■ Using Twist magic

Twist your wrist, holding the handset (1)

1

Return your wrist to the original position (2)

2

: Switch to the previous app that you have used.

Switching Apps

Switch to the second app displayed in Recent Apps. Operate
repeatedly to switch between the top and the second app displayed
in it alternately. For details on Recent Apps nP. 29 “Recent Apps”

1 The second usage history item

This is the history item of previous app that you have used.

Carry out Twist magic to switch to this app.

2 The top usage history item

This is the history item of app that you are using. Carry out

Twist magic to move it to the second one in Recent Apps.

The history item may not be remained in Recent Apps

depending on the app. You cannot switch to the app whose
history item is not remained.

Emergency mode

You can save the internal battery by restricting settings and
functions on the handset.

H (for at least 1 second)/[Emergency

1

mode]/[OK]

: The handset restarts and it switches to Emergency mode.

■ Disabling Emergency mode

H (for at least 1 second)/[Emergency

1

mode]/[OK]

: Alternatively, in the Emergency mode screen, [Stop

saving]/[OK] to disable Emergency mode.

: The handset restarts and Emergency mode is disabled.

Searching information on the handset and
websites

In the home screen, select “Google” folder/

1

[Google]

: If the confirmation screen for Google Now™ is displayed,

check the content, follow the instructions on the screen and
operate.

: Quick search box appears.

Enter the keyword

2

1 Search box

Enter the keyword to search with.
When the keyword is entered, apps, data, etc. whose

names start with the entered characters are searched
and displayed as a list.

2 Switch to Voice Search

Alternatively, say “Ok Google” at the microphone to

switch to Voice Search.
･ When [Search, or say “Ok Google”] is displayed in the

search box etc., the operation is available.

20

Before Using the Handset

Select the search result

12 keyboard

3

: When a search result is an app, the corresponding app is

activated.

: If [IMAGES] etc. is displayed, you can search by selecting a

genre.

: When you cannot see search results hidden behind the

keyboard, touch [v] to close the keyboard.

When [s] is displayed in the search results screen etc., touch

[s] to set the search.

Character entry

You can enter characters using the QWERTY keyboard,
12 keyboard, voices and kuten codes.

When entering characters, touch [D] at the bottom of the

screen to set the input software to use. The explanations are
based on the case when [S-Shoin] is set here.

Keyboard layouts

You can use the following two types of the keyboards.

QWERTY
keyboard

12 keyboard Several characters are assigned to one

※Each key may change depending on the settings and the

condition.

1 Shift key

Touch to switch between upper/lower case characters etc.

･ When [*] is displayed, lower case characters are entered.

When [+] is displayed, the first character to be entered
becomes upper case one. When [,] is displayed, upper
case characters are entered.

･ Symbols that can be entered using the keyboard change

when you switch the upper/lower case characters.

2 Input mode switching key

Switch input modes.

･ Touch to switch input modes in the order of Half Numeric b

Hiragana/Kanji b Half Alphabet. Slide to the right to switch
input modes in the order of Hiragana/Kanji b Half Numeric
b Half Alphabet.

You can enter a displayed character by
touching the character entry key. Use
romaji for entry.

character entry key. Enter characters by
flicking a character entry key up/down or to
the left/right.
You can enter characters by touching a

character entry key until a character
which you want to enter is displayed.

QWERTY keyboard

･ Slide up to select an input mode other than Hiragana/Kanji,

Half Alphabet and Half Numeric as well.

･ The keyboard set in each input mode is displayed.

3 Delete key

Delete characters displayed in a direction set in Delete key

behavior.

4 Enter key

Insert a line feed.
Determine the entered characters.
Execute operations entered in an entry field such as the

search box.

Move to the next entry field.
Touch and hold to close the keyboard.

5 Symbol key

Display the pictogram/Deco-mail pictogram/symbol/emoticon

list.
･ You cannot enter these symbols in some apps.

Slide to the right to display Quote apps list.

6 Katakana and alphabet key

Display katakana of the entered characters or conversion

candidates (katakana and alphabet conversion candidates) of
alphabets or symbols assigned to a touched key.

Slide to the right to display Quote apps list.

7 Undo key

Undo the previous operation.

8 Setting key

Displa

9 Space key

a Conversion key

b Cursor key

c Move position

d Katakana and alphanumeric key

e Reverse toggle key

f Character switching key

y setting menu.

Enter a space.

Convert the input ch

Move the cursor or change the range of characters to be

converted.

Touch [1]/[2] to move the keyboard, conversion candidates

field, etc. to the left/right.

Display katakana of the entered characters or conversion

candidates (katakana and alphanumeric conversion
candidates) of alphanumerics or symbols assigned to a
touched key.

Slide to the right to display Quote apps list.

Display characters assigned to the same key in the inverse

order.

Touch to switch the upper/lower case characters.
Touch to add dakuten/handakuten.

aracters.

■ Switching keyboards

Example: In Hiragana/Kanji input mode on vertical display

In the character entry screen, [T]/[Input UI]/

1

[QWERTY keyboard]/[12 keyboard]

: Alternatively, slide [T] up to switch keyboards.

Setting character entry

■ Display/Layout

In the character entry screen, [T]/[Display /

1

Layout]

Select an item

2

Keyboard layout: Make settings for the keyboard size, the

number of lines of the conversion candidates field,
alignment, the key top guides and design.

Emoji/Symbol list rows: Set the number of columns of

pictograms list/symbols list.

21

Before Using the Handset

Key input guide: Set whether to zoom in the selected key and

to display the guide of flick input.

Software keyboard display setting: Set whether to display the

character entry screen when you connect a commercially
available keyboard using the Bluetooth function etc. and
enter characters.

■ Input assistance

In the character entry screen, [T]/[Input

1

assistance]

Select an item

2

Flick sensitivity: Set the sensitivity of the keyboard for when

selecting characters with flick input.

Guide display speed: Set how fast the guide is displayed

while entering characters with flick input.

Toggle input: Set whether to use the toggle input.
Sound on key press: Set whether or not to enable operation

sounds of entering characters.

Vibrate on key press: Set whether to activate the vibrator

when entering characters.

Vibration time on key press: Set how long Vibrate on key

press keeps the vibrator activated.

Voice input provider: Set where to connect when using the

voice input.

Delete key behavior: Set the operations of the delete key.
Romaji input assistance: Set to prevent unnecessary keys

from being touched when entering Japanese with romaji.

Auto cursor move: Set the speed for the cursor to

automatically move to the right side after entering characters.

Emoji/Symb/:) continuous input: Set whether to keep the

pictogram/symbol/emoticon list displayed after selecting a
candidate from it.

[Delete key behavior]

When the cursor is on a character, delete the character. When

[Left-delete (Backspace)] is set and the cursor is at the
beginning of a text, you can delete characters on the right side
of the cursor. When [Right-delete (Clear)] is set and the cursor
is at the end of a text, you can delete characters on the left side
of the cursor.

■ Conversion

In the character entry screen, [T]/[Other

1

settings]/[Conversion]

Select an item

2

Word prediction: Set whether to use the predictive

conversion.

Next word guess: Display relational predictive candidates

immediately after an entry is determined.

Wildcard prediction: Set whether to use the wildcard

prediction.

Typing error correction: Set Typing error correction.
Beginning prediction for mail: Display text candidates to use

at the beginning of a message when entering the message
for a mail.

Internet conversion engine: Display conversion candidates

by using a conversion engine on the Internet.

Auto capitalization: In half-width alphabet entry, enter an

initial character at the head of a text with upper case one.

Auto space input: In half-width alphabet entry, automatically

insert a half-width space after selecting an English word.

[Auto capitalization]

This function may not follow the setting depending on the app in

use.

■ Dictionary

In the character entry screen, [T]/[Other

1

settings]/[Dictionary]

Select an item

2

User dictionary: Edit words in the user dictionary.
Download dictionary: Register/Cancel/Delete downloaded

dictionaries.

Update conversion dictionary: Update or download

conversion dictionaries.

Contacts name collaboration: Add name data of the

phonebook to the dictionary or reset the name data in the
dictionary.

■ Slide operation

In the character entry screen, [T]/[Other

1

settings]/[Slide operation]

Select an item

2

Upward slide: Set the operations available when you slide

the keyboard from its bottom to top.

Downward slide: Set the operations available when you slide

the keyboard from its top to bottom.

Rightward slide: Set the operations available when you slide

the keyboard from its left edge to right edge.

Leftward slide: Set the operations available when you slide

the keyboard from its right edge to left edge.

■ Reset

In the character entry screen, [T]/[Other

1

settings]/[Reset]

Select an item

2

Set the default settings: Reset the settings of S-Shoin.
Clear learning dictionary: Reset the learning dictionary.
Reset facemark list: Reset the contents of the emoticon list.

Entering characters

Example: When entering “文字”

In the character entry screen, enter “もじ”

1

1 Enlarge/Reduce

Enlarge/Reduce the conversion candidates field.

2 Conversion candidates field

Displayed when [Word prediction] is enabled.
Touch one of conversion candidates to enter.
If you set an Internet conversion engine, [Net conv] is

displayed. Touch it to display conversion candidates
searched by the conversion engine on the Internet.

[Convert]

2

22

Before Using the Handset

In the conversion candidates field, select “文字”

3

1 Range reduction/Range enlargement

Reduce/Enlarge the range of characters to convert.
Displayed only when available.

2 Close

Close the conversion candidates field.

3 Conversion candidates field

Touch one of conversion candidates to enter.
If you set an Internet conversion engine, [Net conv] is

displayed. Touch it to display conversion candidates
searched by the conversion engine on the Internet.

4 Determine

Determine the conversion.

5 Predictive candidates

Predictive candidates are displayed.

6 Conversion candidates

Conversion candidates are displayed.

7 Katakana and alphanumeric

Katakana and alphanumeric conversion candidates are

displayed.

■ Wildcard prediction

Conversion candidates are predicted according to the number of
the entered characters and appear.

Enable [Wildcard prediction] in advance (nP. 22 “Conversion”).
This function is available in the Hiragana/Kanji input mode and

the Half Alphabet input mode.

Example: When entering “アナウンス”

In the character entry screen, enter “あな”

1

[S]/[S]/[S]

2

: Each time you touch [S], [*] is entered and the predictive

candidates appear according to the number of characters.

In the conversion candidates field, select “アナ

3

ウンス”

■ Inputting with kuten codes

You can use four-digit kuten codes assigned to each character for
entering kanji, hiragana, katakana, symbol, alphanumeric
characters, etc.

In the character entry screen, slide the input

1

mode switching key up/[Character Code]

Input a kuten code

2

: After the fourth digit is entered, the corresponding character

appears.

: After the fourth digit is entered, the input mode is switched to

the previous one.

■ Inputting with voices

You can enter characters with voices.

In the character entry screen, [T]/[Input UI]/

1

[Voice Input]

: Alternatively, slide [T] to the right while the QWERTY

keyboard is used or slide [T] down while the 12 keyboard is
used to switch to the voice input.

Speak at the microphone

2

In the following cases, the voice input may not work properly.

When the voice is too loud
When the surrounding noise is big
When the phonation is not clear
When the phonation is not natural
When the pronunciation is too fast
When any key is pressed or the microphone is touched

■ Editing characters

You can perform operations such as cutting, copying or pasting by
selecting the entered characters.

Touch and hold the entered characters

1

Edit the characters

2

: Drag [b]/[c] and specify the selection range to operate

such as cut, copy or paste of characters. Touch [SELECT
ALL] to select all the entered characters.

: Touch [CLIPBOARD] to display the history of cut and copied

characters. Select characters to paste them.
･ To display the list of cut or copied characters: [T]/[Quote

apps]/[Copy History SH]

: Touch [SHARE] to use selected characters in other apps.
: If there are menus which are not displayed, [{] is displayed.

Touch it to display the menus.

Up to 10 history items of cut and copied characters can be

saved.

If the number of history items of cut and copied characters

exceeds the maximum number to be saved, they are deleted
from the oldest one.

Displayed icons or operation methods may differ depending on

the apps to use.

Changing screen display to English

In the home screen, [R]/[設定] (Settings)/[言

1

語と入力] (Language & input)/[言語]
(Language)/[English]

Initial settings

When you turn the power on for the first time, the initial
settings screen is displayed. Follow the instructions on the
screen and set.

The following items can be set. However, items to be displayed

may differ depending on the Google account settings.

Language setting
Wi-Fi settings (nP. 24 “Wi-Fi settings”)
Copy your Google accounts etc. from your other device (Tap &

Go)

Google account settings (nP. 25 “Setting up Google account

etc.”)

Owner's name of the handset
Google services
Set up payment info

23

Before Using the Handset

Add a mail address other than Google account
Protect your phone
Get your apps & data
Google Now setting

The confirmation screens for sending device error information

and for software update are also displayed.

■ Initial settings for docomo service

When the initial settings screen for docomo

1

service is displayed, [Agree to all]/[Start
settings]

Make the initial settings

2

: The following items can be set.

d ACCOUNT
docomo cloud
docomo apps password
docomo location information
Remote Initialization Service
Install all apps

* This is not displayed when you have not set a docomo

apps password.

[Start using]

3

*

Setting an access point

An access point (sp-mode) for Internet connection is
registered by default. You can add other access points and
change them if necessary.
For details on sp-mode, refer to the DOCOMO website.
If you want to use mopera U or Business mopera Internet, add
an access point of either provider manually.
For details on mopera U, refer to the mopera U website.

■ Checking an access point in use

In the home screen, [R]/[Settings]/[More]/

1

[Cellular networks]/[Access Point Names]

■ Setting additional access points

Never set the MCC to a figure other than 440 or the MNC to a

figure other than 10. Otherwise the added access point
disappears from the screen.

In the home screen, [R]/[Settings]/[More]/

1

[Cellular networks]/[Access Point Names]/
[m]

[Name]/enter the name of the network profile

2

to create/[OK]
[APN]/enter the access point name/[OK]

3

Enter other items required by network

4

operators/[z]/[Save]

If the settings of MCC and MNC are changed and the added

access point disappears from the screen, reset the settings or
set the access point manually.

Resetting an access point

Reset an access point to default setting.

In the home screen, [R]/[Settings]/[More]/

1

[Cellular networks]/[Access Point Names]
[z]/[Reset to default]

2

When sp-mode is not subscribed or if you fail to make

automatic setting of an access point due to signal status such
as outside the service area, you are required to set the access
point again manually.

Wi-Fi settings

If you use Wi-Fi function of the handset, you can use mail or
Internet by connecting to access points of your home,
corporate network or public wireless LAN service.

Radio interference with Bluetooth devices

Wireless LANs (IEEE 802.11b/g/n) use the same frequency

band (2.4 GHz) as Bluetooth devices. Therefore, using the
wireless LAN device near a Bluetooth device may cause radio
interference, lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth device or
keep the handset and the wireless LAN device at least
approximately 10 m away from the Bluetooth device.

Packet communication is also available while [Wi-Fi] is set to On.

Wi-Fi connection is prioritized while Wi-Fi connection is set, but
the connection is automatically switched to that of LTE/3G/GPRS
network once Wi-Fi connection is terminated. Note that packet
communication charges may be incurred in this case.

Refer to the manual of your wireless LAN base unit when using

the access point at home etc.

Operate access point registration near the access point.
If you use the docomo service by using Wi-Fi function, set

d ACCOUNT in advance. In the home screen, [R]/[Settings]/
[docomo service/cloud]/[dアカウント設定] (Set d ACCOUNT)

to set it.

In the home screen, [R]/[Settings]/[Wi-Fi]

1

Set to On

2

Select an access point

3

: If you select an access point protected by security, enter the

password (security key) and select [CONNECT].

: To register access points manually: [z]/[Add network]/

enter the network name/set security/[SAVE]

: WPS compatible access points can be easily registered. In

the home screen, [R]/[Settings]/[Wi-Fi]/[z]/[Easy
Settings]/[WPS Push Button]/[WPS Pin Entry] to register an
access point.

When you select an access point and connect to it with a wrong

password (security key), [IP Configuration Failure], [WiFi
Connection Failure], [Authentication problem] or [Connected
(Limited)] is displayed. Confirm the password (security key).
When [IP Configuration Failure] or [Connected (Limited)] is
displayed after entering the correct password (security key),
you may not have acquired the correct IP address. Connect to
the access point again after confirming signal status.

The registration process using WPS takes a few minutes. After

completion of the registration of the access point, check that the
proper connection to the access point is acquired.

As for the manual registration of an access point, this function

supports WEP, WPA/WPA2 PSK and 802.1xEAP as the
security setting.

If you connect to an access point which is not connected to the

Internet, [5] is displayed and the communication may be made
by mobile networks, not Wi-Fi connection.
To make Wi-Fi communication by using such an access point,
enable [Using this AP without internet connection] of Advanced
options before connecting to the access point.

24

Before Using the Handset

■ Detailed settings

In the home screen, [R]/[Settings]/[Wi-Fi]

1

[z]/[Advanced]

2

Select an item

3

Network notification: Set whether to display a notification

icon when an open network is detected.
･ Set it after setting [Wi-Fi] to On.

Wi-Fi sleep policy: Set whether to disconnect Wi-Fi when the

display is turned off.

Avoid poor connections: Set whether to use the Wi-Fi

function only when stable Internet connections are available.

Wi-Fi frequency band: Set the frequency band to use.
Mobile/Wi-Fi simultaneous use: Make settings for

simultaneous use of mobile and Wi-Fi networks.

Install certificates: Install certificates.
Wi-Fi Direct: Make settings for Wi-Fi Direct.
Passpoint: Set whether to automatically connect to the

available Passpoint compatible access points when [Wi-Fi] is
set to On.

MAC address: Confirm the MAC address.
IP address: Confirm the IP address.

■ Mobile/Wi-Fi simultaneous use

You can make settings for the function to automatically switch to
mobile networks when communications with Wi-Fi access points
slow down (Smooth change mode) or the function to download
content at high speed using mobile and Wi-Fi networks at the same
time (Dual Speed mode).

Set [Wi-Fi] to On and connect to an access point in advance.
Since packet communication is also used when you use mobile

and Wi-Fi networks at the same time, packet communication
charges may be incurred.

In the home screen, [R]/[Settings]/[Wi-Fi]

1

[z]/[Advanced]

2

[Mobile/Wi-Fi simultaneous use]

3

Select an item

4

Simultaneous use mode setting: Set a mode to use.

･ It is necessary to register applicable access points and

apps in [Advanced] to use mobile and Wi-Fi networks at the
same time.

Advanced settings: Make settings for applicable access

points and apps, and inapplicable servers.

Notes: Check the precautions.

: Touch []] of an item to display its explanations.

■ Disconnecting

In the home screen, [R]/[Settings]/[Wi-Fi]

1

Select the connected access point/

2

[DISCONNECT]

: Disconnect with the password retained. The access point

may be automatically connected again such as when the
display is turned on.

Tethering

You can use the tethering function that connects Wi-Fi
compatible devices, or PCs etc. connected via Micro USB
Cable 01 (sold separately) or Bluetooth communication to the
Internet by using the handset as an access point.

You can connect up to 15 devices in total at the same time: a PC

connected via Micro USB Cable 01, 10 Wi-Fi compatible devices
and four Bluetooth devices.

The handset supports dial-up connections via DUN profile.
Before using Bluetooth tethering, register the other party's

Bluetooth device in advance (nP. 82 “Using Bluetooth
function”).
As for the settings on the Bluetooth device, refer to its manual.

In the home screen, [R]/[Settings]/[More]/

1

[Tethering]

Select an item

2

USB tethering: Set whether to use the USB tethering.
Wi-Fi tethering: Set whether to use the Wi-Fi tethering.
Set up Wi-Fi hotspot: Make settings for Wi-Fi tethering such

as network name and security.

Wi-Fi tethering Easy Connection: Set whether to use the

tethering by connecting to WPS compatible access points.

Bluetooth tethering: Set whether to use the Bluetooth

tethering.

[USB tethering]

The tethering function is available when OS of PCs is Windows

Vista, Windows 7, Windows 8.1, Windows 10 or Linux.

A microSD Card inserted in the handset cannot be mounted on

a PC during USB tethering.

For details on USB tethering, refer to the following website.

(http://www.android.com/tether#usb)

[Wi-Fi tethering]

While the handset is functioning as an access point, it cannot

access the Internet via Wi-Fi connection.

Make settings for Wi-Fi access points in [Set up Wi-Fi hotspot].

For details on Wi-Fi tethering, refer to the following website.

(http://www.android.com/tether#wifi)

[Set up Wi-Fi hotspot]

At the time of purchase, Network name is set to [SH-04H_AP]

and Security is set to [WPA2 PSK] while Password is set
randomly. Change the settings if necessary.

Setting up mail account

In the home screen, [R]/[Email]

1

: Only when an account is not set up, the account setup

screen appears.

Enter mail address/[a]

2

Enter password/[a]

3

: Provider information is preset for some mail accounts, and a

receiving mail server and a sending mail server are
automatically set.

: When you use an account whose provider information is not

preset, it is necessary to set a receiving mail server and a
sending mail server manually. For details on those settings,
contact the Internet service provider you use.

Set up an account/[a]

4

Enter an account name and your name/[a]

5

Setting up Google account etc.

In the home screen, [R]/[Settings]/

1

[Accounts]/[Add account]

Select an account type

2

Set up an account

3

: In the home screen, [R]/[Settings]/[Accounts] to find the

added account on the displayed menu.

25

Before Using the Handset

When activating the app that requires an account without

Status bar

Status iconNotification icon

setting one up, the account setup screen appears.

Keep a separate memo of the set account and password.

■ Deleting your account

In the home screen, [R]/[Settings]/

1

[Accounts]
Select an account/[z]/[Remove account]/

2

[REMOVE ACCOUNT]

: Operation methods may differ depending on the account.

■ Retrieving your Google account password

If you forget your Google account password, retrieve it.

In the home screen, [o]

1

Enter “(https://www.google.com/ncr) ” in the URL

2

entry field/[Go]/[Sign in]/[Need help?]/
follow the instructions on the screen and
operate

■ Synchronizing data

You can synchronize data between the handset and online
services. You can access the same personal information as those
stored in online services from the handset and PC, and you can use
and update data by synchronizing them.

When synchronizing automatically

Set whether to automatically synchronize items set in each
account.

In the home screen, [R]/[Settings]/

1

[Accounts]

: To set items to synchronize: Select an account type/select

an account/select an item

[z]/[Auto-sync data]/[OK]

2

Register a Google account in advance when you synchronize

the phonebook of the handset memory with contacts on the
online services even if you synchronize with an account other
than Google account.

When synchronizing manually

When Auto-sync data is disabled, you can synchronize selected

items manually.

In the home screen, [R]/[Settings]/

1

[Accounts]
Select an account type/select an account

2

Select items to be synchronized

3

■ Importing from/Exporting to microSD Card

In the home screen, select “ドコモクラウド”

1

(docomo cloud) folder/[docomo
phonebook]/[Contacts]

[}]/[SD card/SIM card/common]

2

[Activate docomo backup app]

3

: docomo backup is activated. For details on backing up/

restoring the phonebook by using docomo backup
nP. 65 “Backing up to/Restoring from a microSD Card”

Incoming/Charging lamp

The incoming/charging lamp notifies you that there is a
missed call, the handset is being charged, etc. by illuminating/
flashing.

State of lamp Color State of handset

Illuminating Ruby (Red) Charging in progress (Battery

Illuminating Emerald (Green) Charging in progress (Battery

Flashing Ruby (Red) Charging unavailable

Flashing Crystal (Light sky

Flashing Prism (White) New mail received

Flashing Sapphire (Blue) New docomo mail received

For details on the setting of when to make it flash or how to make

it flash nP. 67 “Illumination”

When the display is on, the incoming lamp which notifies you of

missed calls, new mails and new docomo mails does not flash.
Check them with notification icons. When notification icons do
not appear since you play videos with Media Player etc., check
them on a screen with the status bar appearing.

blue)

level is approx. 94% or less)

level is approx. 95% or more)

During an incoming call/Call
missed

Screen display/Icons

Icons displayed on the status bar at the top of the screen give
you various kinds of information, such as the status of the
handset or the presence of missed calls. You can check the
detailed information by displaying the status panel.

Viewing icons

Two kinds of icons are displayed.

Notification icon: Notifies you of missed calls, new mails, etc.
Status icon: Display the status of the handset such as the

battery level or the signal status.

Importing/Exporting phonebook

■ Importing from docomo nano UIM card

In the home screen, select “ドコモクラウド”

1

(docomo cloud) folder/[docomo
phonebook]/[Contacts]

[}]/[SD card/SIM card/common]

2

[Restore from SIM card]

3

: If there are multiple accounts, the screen for selecting to

which account to register is displayed.

Select the contact to import

4

: To import all contacts: [}]/[Import all]

■ Main notification icon list

Some notification icons appear with their number superimposed.

+: Missed call

?: New SMS
#: New mail
$: New Gmail
C: New message from Hangouts
k: New Area Mail

26

™

Before Using the Handset

!: Error

Displayed when an error has occurred.

x: Authentication of d ACCOUNT failed
=: Data communication disabled

Displayed when a data communication limit has been reached.

.: Alarm information

&: Schedule notification from Calendar

TV information

6 to 7: Watching/Receiving
): Recording
(: Recording reservation (appears 5 minutes before recording)

K: Playing music with Media Player
,: Making a call/Receiving a call/Talking on the handset/Putting

a call on hold

.: Answering memo
@: Voice mail message
2: microSD Card
1: Available space on the handset memory being run out

G: Omakase Lock set

Bluetooth
;: Receiving registration/connection request from Bluetooth
device

:: Data reception request
<: DUN connection request/DUN connecting

Data transmission and reception

8: Transmission
H: Reception

App

:: App update available
9: Finished installing app

Wi-Fi

E: Open network
G: Wi-Fi connection restriction

h: [USB tethering] enabled
J: [Wi-Fi tethering] enabled
g: [Bluetooth tethering] enabled
i: Multiple tethering enabled
\: Bright Keep set to [ON (Notify)]

Home network

/: Suspending
.: Running

-: Preparing

;: VPN connected
A: Software update available

I: Smart Lock
U: [glove mode] enabled
Z: [RelaxAuto setting] running

>: Notification icon (not appearing)

■ Main status icon list

.: Alarm set

The icon color becomes light while the manner mode is set to

[Total silence].

Battery level

8 to 7: Approx. 100 to 6%
>: Approx. 5% or less

While charging, the battery icon appears with [w]

superimposed.

Percentage of the remaining battery level appears on the left

side of the battery icon. Display/Hide the percentage with
[Display left percents of Battery] (nP. 67 “Wallpaper &
display”).

Signal strength

!: Level 4
#: Level 3
$: Level 2
%: Level 1
&: Level 0
(: Outside the service area

4: docomo nano UIM card not inserted

): Airplane mode

3G data communication status

0: 3G available
1: Receiving data via 3G
2: Sending data via 3G
3: Sending and receiving data via 3G

GSM data communication status

P: GSM available
Q: Receiving data via GSM
R: Sending data via GSM
S: Sending and receiving data via GSM

LTE data communication status

k: LTE available
m: Receiving data via LTE
n: Sending data via LTE
o: Sending and receiving data via LTE

HSPA data communication status

p: HSPA available
q: Receiving data via HSPA
r: Sending data via HSPA
s: Sending and receiving data via HSPA

U: International roaming

NFC/Osaifu-Keitai lock status

d: Handset or docomo nano UIM card locked
e: Handset and docomo nano UIM card locked

Omakase Lock status

f: Handset or docomo nano UIM card locked by remote control
g: Handset and docomo nano UIM card locked by remote control

S: [Reader/Writer, P2P] enabled

Character input mode

!: Hiragana/Kanji
%: Half Alphabet
(: Half Numeric
$: Full Alphabet
&: Full Numeric
): Character Code

Manner mode status

+: Standard manner

-: Total silence
*: Alarms only
,: Priority

A: Talking with a speaker
B: Mute set

only

27

Before Using the Handset

Wi-Fi signal strength

(: Level 4
): Level 3
*: Level 2
+: Level 1
,: Level 0

The Wi-Fi signal strength icon appears with [6] superimposed

like [5] while you connect to an access point which is not
connected to the Internet.

Simultaneous use of mobile and Wi-Fi networks

g: [Smooth change mode] enabled
h: [Dual Speed mode] enabled

Bluetooth

#: Connection stand-by
$: Connected

6: Measuring location information frequently

Answering memo

P: No answering memo when the answering memo is set
Q: One to nine answering memos when the answering memo is

set
R: 10 answering memos when the answering memo is set

Using the status panel

Drag the status bar down with your two fingers

1

at the same time

: Alternatively, touch and hold [}] to display the status panel.

Use the status panel

2

3 Detailed information on notifications

You can check the state of the handset or content of

notifications.

The following operations are available depending on the

type of detailed information.
･ To activate or operate a corresponding app: Touch the

detailed information or the function

･ To switch detailed display/simplified display: Slide the

detailed information up/down with your two fingers at
the same time or pinch out/in

･ To delete detailed information: Flick the detailed

information to the left/right

･ To set [App notifications]: Touch and hold the detailed

information/[z]

4 Network operator

Connected network operator is displayed.

5 Clear all

Delete the detailed information on notifications and

notification icons. Depending on the content of detailed
information on notification, it cannot be deleted.

6 Battery level

Check the battery usage etc. by touching it while function

buttons are being displayed.

7 Customize of function button

You can rearrange, add and delete the function buttons.

8 Settings

Activate the “Settings” app.

If the number of missed calls is one, [CALL] and [SEND SMS]

are displayed by switching the detailed information on
notification to detailed display. You can make a call or send an
SMS by touching them.

■ Manner mode

You can set to avoid disturbing others when in public.

Drag the status bar down with your two fingers

1

at the same time

[Manner mode]

2

: Manner mode settings screen is displayed. The items to be

displayed may differ depending on the manner mode to
select.

1 Brightness adjusting bar

Drag it to adjust the brightness of the screen.

2 Function button

Make settings for use of the manner mode, Wi-Fi

function, location information, etc.
･ If [/] is displayed under the icon like Wi-Fi and

Bluetooth, touch the display under the icon to carry out
detailed settings.

･ If you touch [Location], the confirmation screens for the

use of location information are displayed. The mode to
be set may differ depending on whether you select
[DISAGREE] or [AGREE] (nP. 72 “Location”). [N] is
displayed when Mode is set to [High accuracy]/[Device
only] while [M] is displayed when Mode is set to [Battery
saving].

Slide the screen up/down or touch the top of the screen to

display/hide function buttons.

1 Type of manner mode

Select a manner mode to set.

Standard manner: The ringtone and operation sound

Total silence: The ringtone and operation sound are

Alarms only: The ringtone and operation sound are

28

are silenced, and the vibrator is activated when
receiving a call or others. For ringing the alarm sound,
it rings according to the setting of “Clock” app. The
media sound is not silenced.

silenced, and even the vibrator is not activated when
receiving a call or others. Also, the alarm sound and
media sound are silenced.

silenced, and even the vibrator is not activated when
receiving a call or others. The alarm sound and media
sound are not silenced.

Before Using the Handset