Senix ToughSonic 14 Data sheet

ToughSonic® 14 Level Sensor (NPT)

PC or Button Setup, Waterproof, Two Selectable Outputs

Up to 14-ft. (4.3 m) maximum range

Non-Contact

Ultrasonic

Distance & Level

Measurement

(NPT thread)

sensors with

TSPC

ware put the power of ultrason­ics in your hands yet retain the
simplicity of push-button TEACH
setup. You can quickly adjust, opti­mize, save and clone your applica­tions without calibration!

ToughSonic sensors contain
a rugged transducer potted in a
stainless steel housing for long
life.

Outputs respond to measured
distance and non-contact technol­ogy means nothing touches your
materials.

Many applications exist in all
industries. Contact Senix today to
discuss your specific needs.

SenixVIEW soft-

Features PC Setup Power!

Distance Measurements

• Long range, short dead band

• Unaffected by optical factors
like color and transparency

• PC or button “teachable” setup

• Narrow beam with adjustments
to optimize performance

• Temperature compensated

Packaging & Performance

• Quick mounting

• Durable sealed housing for wet
or dirty applications

• Short & overload protected I/O

• Multi-sensor synchronization

• Adjustable sensitivity

• Rear status indicators (3)

Free Functionality using adjust-

able interface features like
switch hysteresis and time
delays to build complete solu­tions such as pump or material
flow controllers. Save cost by
eliminating PLCs, delay circuits
and time delay relays!

SenixVIEW PC
Software included!

Use SenixVIEW software (see

separate data sheet) to select
and adjust all interfaces, timing
parameters, filters and modes.
Then view, analyze or log data
to optimize your application.

Flexible configuration means

fewer parts to stock and quick
duplication! Higher volume
OEM options are available.

Push-button "teach" features

provide for several common
adjustments when a PC is not
available.

TSPC-N1S1 Series

in IP68 rated SS316 housing

1-in NPT thread

Output Selection

In addition to the model's RS-232
or RS-485 serial data interface
there are two SenixVIEW selected
outputs to suit your application.
All outputs have configurable end­points, setpoints, event responses
and time delays.

Voltage & Current Loop are both

provided simultaneously in
standard (0-10 VDC, 4-20 mA)
or custom ranges. They are fully
configurable and can either rise
or fall with increasing distance.

Switches can be selected in lieu of

one or both analogs, and set to
either "PNP" or "NPN" type
(sourcing or sinking). Each has
independently adjustable set
point, hysteresis, window, initial
conditions, ON delay, OFF delay
and loss of target response for
ultimate flexibility.

Level or Volume Distance-Proximity

800 677 3649 802 489 7300 10516 Route 116 Suite 300, Hinesburg, VT 05461 USA

Fax: [phone] e-mail: [e-mail] web: senix.com

Dimension

Object Detection

Specifications

Senix® Corporation, 10516 Route 116 Suite 300, Hinesburg, VT 05461 USA

Phone: [phone] or 802 489 7300 FAX: [phone]

Web: senix.com e-mail: [e-mail]

ToughSonic® 14 Level Sensor with NPT Threads

Optimum Range 10 ft. (3 m) Max Range 14 feet (4.3 m)
Deadband Typ. < 4 in. (100 mm) Adjustment Button "teach" or SenixVIEW
Case Material 316 stainless steel Configuration Stored in non-volatile memory
Temperature -40 to 158 F (-40 to 70 C) Outputs Two selectable, plus serial data
Humidity 0 to 100% operating Transducer Ruggedized piezoelectric
Compensation Temperature compensated Protection NEMA-4X, NEMA-6P, IP68
Resolution Serial data: 0.0034 in. (0.086 mm); Analog:4099 steps (0-10 VDC), 3279 steps (4-20 mA)
Repeatability Nominal 0.2% of range @ constant temp. Affected by target, distance, environment
Update Rate 20 Hz (50 ms), SenixVIEW adjustable; also affected by SenixVIEW filter selections
Output Selection Voltage & 4-20 mA current loop (defaults), switches, or a combination; see ConneCtions below
Voltage Output 0-10, 0-5 VDC or PC customized, 10 mA max; also push-button teachable endpoints
Current Loop 4-20 mA or PC customized, current sourcing, max. loop 450Ω, teachable endpoints
Sinking Switch 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication
Sourcing Switch 150 mA max. @ input voltage, teachable set point & polarity, fault indication
RS-232, RS-485 Modbus protocol, 9600 to 115200 baud, 8 data bits, 1 stop, no parity
SYNC feature Permits up to 32 sensors to operate in close proximity without interaction

Target Requirements

Objects Detects flat or curved objects. Surface must reflect ultrasound to sensor

Max. Distance

Orientation Flat surfaces should be oriented perpendicular to sensor output beam
Optical Unaffected by target color, light, transparency or other optical characteristics

Affected by size, shape, orientation of target (sound level reflected back to sensor), environment
Restrict use to Optimum Range when using over a wide range of environmental conditions

Connections

Part Numbers

Dimensions

Cable Connection Wire Description

Power Brown 10-30 VDC @ 60 mA maximum; Typical: 45 mA @ 24 VDC (**)
Ground Blue Power and interface common
Voltage Output White * 0-10 VDC, 0-5 VDC or custom end values between 0 and 10 VDC
Current Loop Output Black * 4-20 mA or user adjusted end values between 4 and 20 mA
Switch #1 Output Black * Sinking ("NPN") or Sourcing ("PNP"), user selected
Switch #2 Output White * Sinking ("NPN") or Sourcing ("PNP"), user selected
RS-232 out / RS-485- Gray Serial data connection (depends on model - see part numbers)
RS-232 in / RS-485+ Yellow Serial data connection (depends on model - see part numbers)

(*) Outputs on the black and white wires are SenixVIEW selected. The black wire options are 4-20 mA current loop or switch.
White wire options are 0-10 VDC or switch. Switches can be sourcing or sinking. Max current loop resistance is derated below 15
VDC input voltage.
(**) At default update rate. Output currents not included.

Model Number

TSPC-N1S1-485 Analog, switch and RS-485 serial interface (allows addressable multi-sensor networks)

TSPC-N1S1-485A * Same as above but with only RS-485 serial data interface *

TSPC-N1S1-232 Analog, switch and RS-232 serial data interface (PC COM port compatible)

TSPC-N1S1-232A * Same as above but with only RS-232 serial data interface *

These products are also available with a 30 mm threaded body. See ToughSonic 14 data sheet.

* Models with "A" suffix are data communications only; Analog & switch outputs, pushbutton and interface LEDs are removed.

Senix also offers interconnection, communications, mounting and display accessories.

Description

Mechanical

Dimensions are in inches (mm)

Standard Cable: 6.5ft (2m)

Ships with instructions

Total Weight: 14.2 oz (0.4 kg)

1 July 2019 Rev U2

Copyright Senix Corporation. All rights reserved. Specifications subject to change without notice. This Senix product is not recommended for
applications with hazardous or explosive materials, or as a primary device for personal safety.