Board Mount Pressure
Sensors Line Guide
The pressure is on. The answer is here. No matter the need,
Honeywell Sensing and Control (S&C) has the microstructure,
pressure sensor solution. Our sensing element design consists
of four piezoresistors galvanized with a thin, chemically etched
silicon diaphragm. A pressure change will fl ex the mechanism,
causing a strain in the diaphragm and the buried resistors.
The resistor values will change in proportion to the stress
FEATURES
ULTRA-LOW PRESSURE SENSORS
TruStability® HSC Series.
Features: Proprietary Honeywell
technology • Industry-leading long-term
stability, Total Error Band, and accuracy
• High burst pressures • High working
pressure ranges • Industry-leading
fl exibility • Excellent repeatability
• Onboard signal conditioning • Wide
variety of pressure ranges • Meets IPC/
JEDEC J-STD-020D.1 Moisture Sensitivity
Level 1 requirements • Insensitive to
mounting orientation • Custom calibration
• Insensitive to vibration • Internal
diagnostic functions • Energy effi cient
2
• I
C- or SPI-compatible digital output
or analog output • Small size • RoHS
compliant • Protected by multiple global
patents • Intended for use with noncorrosive, non-ionic working fl uids
Bene ts: Proprietary Honeywell
technology combines high sensitivity with
high overpressure and burst pressure
to give the customer more fl exibility
in sensor implementation and reduce
the customer design requirements for
protecting the sensor without sacrifi cing
the ability to sense very small changes
in pressure. Industry-leading long-term
stability minimizes system calibration
needs, maximizes system performance,
and helps support system uptime
by eliminating the need to service or
replace the sensor during its application
life. Industry-leading Total Error Band
provides the sensor’s true accuracy over
a compensated temperature range of 0
°C to 50 °C [32 °F to 122 °F], eliminating
individual sensor testing and calibration
(which can increase manufacturing time
and process) supporting system accuracy
and warranty requirements, helping
optimize system uptime, and providing
excellent sensor interchangeability.
Industry-leading accuracy reduces
software needed to correct system
inaccuracies, minimizing system design
time, supporting system accuracy and
warranty requirements, and helping
to optimize system uptime. High burst
pressures above 415 inH
allow the sensor to endure a wide range
of conditions while maintaining a high
level of sensitivity which measures
even the smallest change in pressure,
simplifying the design process. High
working pressure ranges above 135
inH
O (336 mbar) allow the sensors to
2
be used continuously well above the
calibrated pressure range. Modular,
fl exible design with many package styles
(with the same industry-leading stability),
pressure ports, and options simplify
integration into the device manufacturer’s
applied, which produces an electrical output. So you’ll fi nd
our components performing in potential applications including
dialysis equipment, blood analysis, centrofusion and oxygen and
nitrogen gas distribution, HVAC devices, data storage, process
controls, industrial machinery, pumps, and robotics. Honeywell
S&C is always working harder, no matter the situation. Or the
pressure.
application. Onboard signal conditioning
typically allows for the removal of signal
conditioning components from the
PCB, reducing costs and simplifying
production processes. Pressure ranges
O (1034 mbar)
2
from ±2.5 mbar to ±40 mbar [±1 inH
to ±30 inH
unique applications. Meets IPC/JEDEC
J-STD-020D.1 Moisture Sensitivity Level 1
requirements which allows the customer
to avoid the thermal and mechanical
damage during solder refl ow attachment
and/or repair that lesser rated products
would incur, and allows unlimited fl oor
life when stored as specifi ed (<30 ºC/85
%RH), simplifying storage and reducing
scrap. Customers may position the
sensor in the most optimal point in the
system, eliminating concern for positional
effects. Reduced susceptibility to
application-specifi c vibration that occurs
with changes in pressure minimizes
inaccurate pressure readings. Custom
calibration typically allows for the removal
of additional components associated
with signal conditioning from the PCB,
reducing PCB size as well as costs often
associated with those components.
Internal diagnostic functions increase
system reliability. Extremely low power
consumption (less than 10 mW, typ.),
provides extended battery life, and
O] provide support for many
2
www.honeywell.com/sensing 1
continued on page 9
O
2
Board Mount Pressure Sensors Line Guide
Working better under
pressure.
The human body is a
supremely sensitive
mechanism, requiring equally
perceptive observation.
Honeywell S&C offers a line
of pressure sensors equal
to every task — including
sensors that measure the
amount of pressure delivered
to the human body.
From medical applications
to industrial needs to any
industry, we’ve got the right
solution. Our categories of
pressure sensor measurement
include absolute, differential,
gage or vacuum gage —
with unamplifi ed or amplifi ed
sensors covering a pressure
range of 0 psi to 250 psi
(0 bar to 17.24 bar). You’ll
also fi nd a variety of mounting
and package styles, digital
output, small size, reduced
cost, enhanced reliability,
enhanced repeatability and
accuracy under extreme
conditions, enhanced
operating characteristics
between sensors, and
interchangeability without
recalibration.
Ultra-Low
Pressure Sensors
TruStability
Signal conditioning amplifi ed amplifi ed
Pressure range
Device type differential, gage differential, gage
Output analog (Vdc) or digital (I
Calibrated yes yes
Compensated yes yes
Operating temperature range
Total error band
Accuracy ±0.25 %FSS BFSL ±0.25 %FSS BFSL
Mounting options DIP, SIP, SMT DIP, SIP, SMT
±2.5 mbar to ±40 mbar
[±1 inH
2
0 °C to 50 °C [32 °F to 120 °F]
(compensated)
±1 %FFS to ±3 %FFS
depending on pressure range
®
HSC Series TruStability® SSC Series
O to ±30 inH2O]
2
C or SPI) analog (Vdc) or digital (I2C or SPI)
Ultra-Low
Pressure Sensors
CPCL Series CPXL Series
Signal conditioning unamplifi ed unamplifi ed
Pressure range 4 inH
Device type absolute, differential, gage absolute, differential, gage
Output mV mV
Calibrated yes no
Temperature compensated yes no
Operating temperature range
Total error band --
Accuracy linearity & hysteresis 0.5% typ. linearity & hysteresis 0.5% typ.
Mounting options SIP SIP
O to 10 inH2O 4 inH2O to 10 inH2O
2
0 °C to 70 °C [32 °F to 158 °F]
(compensated)
±2.5 mbar to ±40 mbar
[±1 inH2O to ±30 inH2O]
-20 °C to 85 °C [-4 °F to 185 °F]
(compensated)
±2 %FFS to ±5 %FFS
depending on pressure range
-25 °C to 85 °C [-13 °F to 185 °F]
2 www.honeywell.com/sensing
Ultra-Low
Pressure Sensors
ASDX Series DCXL-DS XCXL Series
Signal conditioning amplifi ed unamplifi ed unamplifi ed
Pressure range ±5 inH
Device type absolute, differential, bidirectional gage differential differential
Output analog (Vdc), digital (I
Calibrated yes yes yes
Temperature compensated yes yes yes
Operating temperature range
Total error band ±2.0 %FSS max. - -
Accuracy - linearity & hysteresis 0.2% typ. linearity & hysteresis 0.5% typ.
Mounting options DIP SIP SIP
O, ±10 inH2O ±1 inH2O to ±10 inH2O ±4 inH2O to ±10 inH2O
2
2
C or SPI) mV mV
0 °C to 85 °C [32 °F to 185 °F]
(compensated)
0 °C to 50 °C [32 °F to 122 °F]
(compensated)
0 °C to 70 °C [32 °F to 158 °F]
(compensated)
Ultra-Low
Pressure Sensors
XPCL Series XPXL Series
Signal conditioning unamplifi ed unamplifi ed
Pressure range 4 inH
Device type differential, gage differential, gage
Output mV mV
Calibrated yes no
Temperature compensated yes no
Operating temperature range 0 °C to 70 °C [32 °F to 158 °F] (compensated) -25 °C to 85 °C [-13 °F to 185 °F]
Total error band --
Accuracy linearity & hysteresis 0.5% typ. linearity & hysteresis 0.5% typ.
Mounting options SIP SIP
O to 10 inH2O 4 inH2O to 10 inH2O
2
www.honeywell.com/sensing 3
Board Mount Pressure Sensors Line Guide
Ultra-Low
Pressure Sensors
SCXL Series
Signal conditioning unamplifi ed unamplifi ed
Pressure range 4 inH
Device type differential, gage differential, gage
Output mV mV
Calibrated yes yes
Temperature compensated yes yes
Operating temperature range
Total error band --
Accuracy linearity & hysteresis 0.2% typ. linearity & hysteresis 0.2% typ.
Mounting options SIP DIP
O to 10 inH2O ±5 inH2O to ±10 inH2O
2
0 °C to 50 °C [32 °F to 122 °F]
(compensated)
SDX005IND4
SDX010IND4
0 °C to 50 °C [32 °F to 122 °F]
(compensated)
Ultra-Low
Pressure Sensors
SXL Series DUXL Series
Signal conditioning unamplifi ed unamplifi ed
Pressure range ±10 inH
Device type differential, gage differential, gage
Output mV mV
Calibrated no no
Temperature compensated no no
Operating temperature range
Total error band --
Accuracy linearity & hysteresis 0.2% typ. linearity & hysteresis 0.5% typ.
Mounting options SIP SIP
4 www.honeywell.com/sensing
O 1 inH2O to 30 inH2O
2
0 °C to 50 °C [32 °F to 122 °F] -25 °C to 85 °C [-13 °F to 185 °F]
(compensated)
Low Pressure
Sensors
TruStability
Signal conditioning amplifi ed amplifi ed unamplifi ed
Pressure range 60 mbar to 10 bar [1 psi to 150 psi] 60 mbar to 10 bar [1 psi to 150 psi] 60 mbar to 10 bar [1 psi to 150 psi]
Device type absolute, differential, gage absolute, differential, gage absolute, differential, gage
Output analog (Vdc) or digital (I
Calibrated yes yes no
Compensated yes yes no
Operating temperature range
Total error band ±1 %FSS ±2 %FSS -
Accuracy ±0.25 %FSS BFSL ±0.25 %FSS BFSL ±0.25 %FSS BFSL
Mounting options DIP, SIP, SMT DIP, SIP, SMT DIP, SIP, SMT
0 °C to 50 °C [32 °F to 122 °F]
(compensated)
®
HSC Series TruStability® SSC Series TruStability® NSC Series
2
C or SPI) analog (Vdc) or digital (I2C or SPI) mV
-20 °C to 85 °C [-4 °F to 185 °F]
(compensated)
-40 °C to 85 °C [-40 °F to 185 °F]
(uncompensated)
Low Pressure
Sensors
24PC Series 26PC Series
Signal conditioning unamplifi ed unamplifi ed
Pressure range
0.5 psi to 250 psi (SIP, DIP)
1 psi to 15 psi (SMT)
Device type absolute, differential, wet-wet differential, gage, vacuum gage differential, wet-wet differential, gage, vacuum gage
Output mV mV
Calibrated no yes
Compensated no yes
Operating temperature range -40 °C to 85 °C [-40 °F to 185 °F] 0 °C to 50 °C [32 °F to 122 °F] (compensated)
Total error band --
Accuracy linearity & hysteresis 0.5% typ. linearity & hysteresis 0.5% typ.
Mounting options DIP, SIP, SMT DIP, SIP, SMT
1 psi to 250 psi (SIP, DIP)
1 psi to 15 psi (SMT)
www.honeywell.com/sensing 5
Loading...