Sega Tokio Selfie User Manual

In order to access the full features of Tokio Selfie, please install Camera 360 in your Smartphone through Google Play Store, and run Camera 360 to access the full features of Tokio Selfie.
Thank you for choosing Tokio selfie timer. This is a convenient wireless self camera monopod, you can take picture anytime, anywhere, share every moment. This product works with iPhone, Samsung Phone, Tokio smartphone and other smartphone with selfie timer function, please follow the user manual as below and keep it for your future reference.
1 What’s Include
The following components are included with your purchased product:
Tokio self timer USB Cable Mobile phone holder Instruction Manual Sling
2 Appearance and buttons
1. Mobile phone holder
2. Stainless flexible pipe
3. Camera botton
4. Zoom-in botton
5. Zoom-out botton
6. Power bottom
7. 1/4 screw
8. Micro USB port
9. Power indicator
1 2 3 4 5 6 7 8 9
9
3 Product Introduction
Main Specs. Bluetooth V2.0 Compatible with iOS and Android systems Operational distance: 10M. Color: black Working frequency: 2.4GHz Working current: 1mA Working temperature: -10 to 55 Working voltage: 3V-4.2V Working humidity: 10%-70% Battery type: 80mAh lithium battery. Charging time: About 1 hour
4 Operating Instructions
In order to access the full features of Tokio Selfie, please install Camera 360 in your Smartphone through Google Play Store, and run Camera 360 to access the full features of Tokio Selfie.
How to pair your phone with self timer?
2. Turn on the Bluetooth function on your smartphone and scan all available Bluetooth devices, then find the Bluetooth device named “TOKIO”.
3. Then pair your smartphone with TOKIO, wait for about 8 seconds until green LED light constantly flashed, this indicate the connection is successful.
4. Screw up your mobile phone on the phone holder.
5. Press CAMERA button to take photo.
7. In order to make your smartphone fully compatible with Tokio Selfie stick, it is suggested to download the Camera360 from Play Store or App Store, then run the Camera360 in your smartphone to perform the selfie functions.
5 Sleeping mode:
1. When the device is idle for 5 minutes, the device will enter into sleeping mode and disconnect Bluetooth automatically. Press the camera button shortly, the device will connect with the previously connected smartphone automatically.
6 Important Maintenances Precautions
In order to offer your Tokio self timer with good maintenances, please always follow the below basic precautions:
·Store the self timer in a cool, dry place to avoid damaging.
·Do not expose the self timer to above 60 or extremely humid environment to avoid
short circuit and battery damage.
·Keep it away from water.
·Prevent the device from failing or impact during usage, as this may cause damage to the
device.
·Do not clean your self timer using harsh chemicals, detergents and chemicals that can
dissolve the plastic.
·Do not attempt to dismantle the self timer by yourself to do any repair, this will damage
the self timer and void the warranty.
·If your self timer will not be used for an extended period of time, please charge it once a
year to ensure proper functioning.
7 Battery Management
The battery is not fully charged from factory, so it is recommended that you charge the battery for at least 1 hour before you start to use the device. The rechargeable battery is designed and manufactured to be used and recharged frequently. As same for all lithium batteries, the capacity of the battery reduces each time it is charged. However you can still try to prolong the battery’s lifetime by following the suggestions below:
·Use your solar charger at least once a week.
·Fully charge the battery regularly.
·Never leave the battery fully discharged for a long period of time
·Always keep the device and the battery away from heat and moisture.
Loading...