Sega Double Spin Owner's Manual

IMPORTANT

• Before using this product, read this manual carefully to understand the
contents herein stated.

• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.

OWNER'S MANUAL

420-0017UK

DOUBLE SPIN

Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [e-mail] Web: http://www.segaarcade.com

Play It! Amusements, inc.
252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales: +00 (1) 224 265 4287

© SEGA

1st PRINTING

BEFORE USING THE PRODUCT

,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the operation of the

product. After carefully reading and sufciently understanding the warning displays and cautions, handle the product

appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used. Be sure to
understand the contents of the displays before reading the text.

Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.

Indicates that mishandling the product by disregarding this warning will cause a
potentially hazardous situation which can result in death or serious injury.

Indicates that mishandling the product by disregarding this caution will cause a
slight hazardous situation which can
result in personal injury and/or material damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and equipment, this display is at­tached to places where the Owner's Manual, Serviceman Manual and/or Service Manual should be referred
to.

• Perform work in accordance with the instructions herein stated. Instructions for work are explained

by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions
can cause accidents. In the case where only those who have technical expertise should perform the work
to avoid hazardous situation, the instructions herein state that the site maintenance personnel should
perform such work.

• Be sure to turn off the power before working on the machine. To prevent an electric shock, be sure

to turn off the power before carrying out any work that requires direct contact with the interior of the
product. If the work is to be performed in the power-on status, the Instruction Manual herein always states
to that effect.

• Be sure to ground the Earth Terminal. (This is not required in the case where a power cord with earth is

used.)

• This product is equipped with the Earth Terminal. When installing the product, connect the Earth

Terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to an electric shock. After performing repair, etc. for the

control equipment, ensure that the Earth Wire is rmly connected to the control equipment.

• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does

not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth

Leakage Breaker can cause a re when earth leakage occurs.

•

Besuretousefuseswhichmeetthespeciedrating.

(Only for the machines which use fuses.)

Using fuses exceeding the specied rating can cause a re and an electric shock. (Only for the machines
which use fuses.)Using fuses exceeding the specied rating can cause a re and an electric shock.

• Specification changes (removal of equipment, conversion and addition) not designated by SEGA are
not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It

is very hazardous to operate the product by removing parts and/or modifying the circuits. Should doors, lids
and protective parts be damaged or lost, refrain from operating the product, and contact where the product was

purchased from or the ofce herein stated. SEGA shall not be held responsible for any accidents, compensation
for damage to a third party, resulting from the specications not designated by SEGA.

• Ensure that the product meets the requirements of appropriate electrical specications. Before installing the
product, check for electrical specications. SEGA products have a nameplate on which electrical specications

are described. Ensure that the product is compatible with the power supply voltage and frequency requirements

of the location. Using any electrical specications different from the designated specications can cause a re

and an electric shock.

• Install and operate the product in places where appropriate lighting is available, allowing warning labels to be
clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous
situations are applied to places where accidents can be caused. Ensure that where the product is operated has

sufcient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please
place an order with where the product was purchased from or the ofce herein stated.

• When handling the monitor, be very careful. (Applies only to products with monitors.) Some of the monitor

parts are subject to high tension voltage. Even after turning off the power, some portions are still subject to
high tension voltage sometimes. Monitor repair and replacement should be performed only by those technical
personnel who have knowledge of electricity and technical expertise.

• Be sure to adjust the monitor properly. (Applies only to products with monitors.) Do not operate the product
leaving on-screen ickering or blurring as it is. Using the product with the monitor not properly adjusted may

cause dizziness or a headache to an operator, a player, or the customers.

• When transporting or reselling this product, be sure to attach this manual to the product.

•

Inthe case wherecommercially available monitorsand printers are used inthis product, only the contents
relatingto thisproductareexplainedherein.Some commerciallyavailableequipmenthas functions and
reactionsnotstated in this manual. Read this manualtogether with the specicinstruction manual ofsuch
equipment.

• Descriptionshereincontainedmaybesubjecttoimprovementchangeswithoutnotice.

• Thecontentsdescribedhereinarefullypreparedwithduecare.However,shouldanyquestionariseorerrorsbe
found,pleasecontactSEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting
to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on the power,
check the following points to ensure that the product has been transported in a satisfactory status.

• Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

• Are casters and adjusters damaged?

• Do the power supply voltage and frequency requirements meet with those of the location?

• Are all wiring connectors correctly and securely connected? Unless connected in the correct way, connector

connections can not be made accurately. Do not insert connectors forcibly.

• Do power cables have cuts and dents?

• Are all accessories available?

• Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?

INTRODUCTION

iii

INTRODUCTION

This manual is intended to provide detailed descriptions together with all necessary information covering the general
operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,

"DOUBLE SPIN"

This manual is intended for the owners, personnel managers in charge of operation of this product.

Operate the product after carefully reading and sufciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the ofce listed below or the point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the word “IMPORTANT” and the symbol below.

Indicates important information that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.

Sega Amusements Europe Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [e-mail] Web: http://www.segaarcade.com.

Sega Total Solutions

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [e-mail] Web: http://www.segaarcade.com/spares

Play it! Amusements

252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales/Service +00(1) 224 265 4287

SPECIFICATIONS

Machine Dimensions:
Cabinet w/o Billboard 0,93m (36.6in.) [Width] x 0.83m (32.7in.) [Depth]

2.03m (79.9in.) [Height]

Cabinet with Billboard 1.19m (46.9in.) [Width] x 0.83m (3.27in.) [Depth]

2.33m (91.7in.) [Height]

Weight: 120Kg

Electrical Consumption

Operating Voltage AC240V (switchable to AC120V via PSU)

Current 0.4A @ AC230~240V

0.5A @ AC220V

0.8A @ AC120V

iv

INTRODUCTION

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialised knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super­vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by
carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable
parts.

Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.

Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-

nance of amusement equipment. The individual should have either graduated from technical school or hold similar

qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Denition of 'Site Maintenence Personnel or Other Qualied Individuals

Procedures not described in this manual or marked as ‘to be carried out by site

maintenance personnel or other qualied professionals’ should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

INTRODUCTION

v

Waste of Electrical and Electronic Equipment (WEEE) Statement.

The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based manufac­turers and importers of Electrical and Electronic Equipment to take back products at the end of their useful life. Sega

Amusements Europe Ltd accepts its responsibility to nance the cost of treatment and recovery of redundant WEEE
in the United Kingdom in accordance with the specied WEEE recycling requirements.

The symbol shown below will be on all products manufactured from 13th August 2005, which indicates this product
must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of their waste
equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical
and electronic equipment.

For more information about where you can send your waste equipment for recycling contact your local authority of-

ce.

For non-UK users contact your local authority ofce for information on the recycling of Waste Electrical and Elec-

tronic Equipment.

Battery Recycling Statement.

The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on the
environment and encourage the recovery of the materials they contain. To achieve increased collection and recycling
of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and importers of port­able, industrial and automotive batteries.

The symbol shown below will be on all equipment tted with batteries from 26th September 2008 and indicates they

must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used batteries
by arranging to return them to a designated collection point for the correct recycling.

For more information about where you can send your waste batteries for recycling contact your local authority of-

ce.

REGISTERED IN ENGLAND REGISTERED NO. 1711515

REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

vi

INTRODUCTION

RoHS Statement.

Sega amusements europe are to the best of our knowledge acting in accordance with the European Union RoHS2
Directive 2011/65/EU and hearby declare that RoHS2 restricted substances are not intentionally added to this
product over the permitted limits.

These limits are:
Lead (0.1%)
Mercury (0.1%)
Cadmium (0.1%)
Hexavalent chromium (0.1%)

Polybrominated biphenyls (0.1%)
Polybrominated diphenyl ethers (PBDE) (0.1%)

Products containing the substances listed above are in concentration levels of that below the maximum limits and are
understood to be in compliance with Directive 2011/65/EU of the European Parliment.

vii

420-0018UK

TABLE OF CONTENTS

INTRODUCTION iii
1 HANDLING PRECAUTIONS 1

2 PRECAUTIONS REGARDING INSTALLATION 4
3 PRECAUTIONS REGARDING OPERATION 7

4 PART DESCRIPTIONS 10
5 ACCESSORIES 11

6 ASSEMBLY AND INSTALLATION 13

6-1 INSTALLING THE CABINET 14
6-2 FIXATION TO SITE 24
6-3 POWER SUPPLY AND OTHER CONNECTIONS 26
6-4 TURNING ON THE POWER 27

7 PRECAUTIONS WHEN MOVING THE MACHINE 29

7-1 PRECAUTIONS WHEN MOVING FROM SITE 30

8 GAME DESCRIPTION 31
9 EXPLANATION OF TEST AND DATA DISPLAY 35

9-1 SWITCH UNIT AND COIN METER. 36
9-2 TEST MENU 36

10 CONTROLLER UNIT(S) 50

10-1 AJUSTING/CHANGING THE POT 51
10-2 GREASING 55

11 FEATURE WHEELS UPR & LWR 56
12 COIN HANDLING 58

12-1 CLEANING THE COIN SELECTOR 58
12-2 FAULT FINDING 61
12-3 ADJUSTING THE PRICE OF PLAY (EXCEL) 62

13 LAMPS AND LIGHTING 66

13-1 REPLACING THE COIN DOOR LAMP 66
13-2 REPLACING THE LED (WHT) UPPER/LOWER DISC 67
13-3 REPLACING THE LED (RGB) UPPER/LOWER DISC 71

14 PERIODIC INSPECTION 73
15 TROUBLESHOOTING 75

11-1

TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN) 75

16 GAME BOARD 78

viii

17 DESIGN-RELATED PARTS 97
18 PARTS LIST 98

19 WIRE COLOUR CODE TABLE 114

20 WIRING DIAGRAMS 115

HANDLING PRECAUTIONS

1

1

1 HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Noncompliance with the following points or inappropriate handling running counter to the cautionary matters herein
stated can cause personal injury or damage to the machine.

Before performing work, be sure to turn the power off. Performing the work
without turning the power off can cause an electric shock or short circuit.
In cases where work should be performed in the status of power on, this
manual always states to that effect.

To avoid an electric shock or short circuit, do not plug in or unplug quickly.
To avoid an electric shock, do not plug in or unplug with a wet hand.

Do not expose power cords or earth wires on the surface, (oor, passage,

etc.) If exposed, the power cords and earth wires are susceptible to
damage. Damaged cords and wires can cause an electric shock or short
circuit.

To avoid causing a fire or an electric shock, do not put things on or
damage the power cords.

When or after installing the product, do not unnecessarily pull the power

cord. If damaged, the power cord can cause a re or an electric shock.

In case the power cord is damaged, ask for a replacement through where

the product was purchased from or the ofce herein stated. Using the cord
as is damaged can cause re, an electric shock or leakage.

Be sure to perform grounding appropriately. Inappropriate grounding can
cause an electric shock.

Be sure to use fuses meeting the specied rating. Using fuses exceeding
the specied rating can cause a re or an electric shock.

Be sure that connections such as IC BD are made properly. Insufficient
insertion can cause an electric shock.

Specication changes, removal of equipment, conversion and/or addition,

not designated by SEGA are not permitted.
Failure to observe this may cause a fire or an electric shock. Non-

compliance with this instruction can have a bad inuence upon physical

conditions of the players or the onlookers, or result in injury during play.
SEGA shall not be held responsible for damage, compensation for damage

to a third party, caused by specication changes not designated by SEGA.

Do not perform any work or change parts not listed in this manual. Doing
so may lead to an accident.

If you need to perform any work not listed in this manual, request work

from the ofce indicated in this manual or the point of purchase, or inquires

for details.
Be sure to perform periodic maintenance inspections herein stated.

2

HANDLING PRECAUTIONS

1

For the IC board circuit inspections, only the use of a logic tester is

recommended. Using a Multi Tester or General Purpose Tester may result in

damage to IC Circuits.
Static electricity from your body may damage some electronics devices

on the IC board. Before handling the IC board, touch a grounded metallic
surface so that the static electricity can be discharged.

This video gaming cabinet utilises a motorised steering feedback system.
Do not attempt to service this part or any other part in close proximity to the
steering mechanism whilst power is applied.

Some parts are not designed and manufactured specifically for this game

machine. The manufacturers may discontinue, or change the specications of

such general-purpose parts. If this is the case, SEGA cannot repair or replace
a failed game machine whether or not a warranty period has expired.

CONCERNING THE STICKER DISPLAY

This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical Speci-

cations. It also has a Sticker describing where to contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.
The Serial Number indicates the product register. Identical machines could have different parts depending on the

date of production. Also, improvements and modications might have been made after the publication of this

manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places.

CONCERNING WARNING DISPLAYS

This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to or in­corporated in the places where a potentially hazardous situation could arise. The warning displays are intended for
accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing work.
Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing mainte­nance, be very careful of the warning displays. It is especially important that any complex repair and replacement
work not mentioned herein should be performed by those technical personnel who have knowledge of electricity and
technical expertise.
In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.

HANDLING PRECAUTIONS

3

1

4

PRECAUTIONS REGARDING INSTALLATION LOCATION

2

2 PRECAUTIONS REGARDING INSTALLATION

This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a fire, electric

shock, injury and/or malfunction.

Places subject to rain or water leakage, or places subject to high humidity in the

proximity of an indoor swimming pool and/or shower, etc.

Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.

Places filled with inflammable gas or vicinity of highly inflammable/volatile

chemicals or hazardous matter.
Dusty places.
Sloped surfaces.
Places subject to any type of violent impact.

Vicinity of anti-disaster facilities such as re exits and re extinguishers.

Areas where the temperature exceeds the applicable temperature (ambient
temperature) range of 5 to 30 degrees centigrade.

LIMITATIONS OF USAGE

Be sure to check the Electrical Specifications. Ensure that this product
is compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specifications is attached to the

product. Non-compliance with the Electrical Specications can cause a re and

electric shock.
This product requires a breaker and earth mechanism as part of the location

facilities. Using the product without these can cause a re and electric shock.

Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area). Non-

compliance with the Electrical Specications can cause a re and electric shock.

Be sure to use an independent power supply equipped with an earth leakage

breaker. Using a power supply without an earth leakage breaker can cause an
outbreak of re if a power surge occurs.

Putting many loads on one electrical outlet can cause generation of heat and a

re resulting from overload.

When using an extension cord, ensure that the cord is rated at 7A or higher (AC

100 V ~ 120 V area) and 3A or higher (AC 220 V ~ 240 V area). Using a cord rated
lower than the specied rating can cause a re and electric shock.

PRECAUTIONS REGARDING INSTALLATION LOCATION

5

2

Securing a safe area for operation as described in this manual will ensure
safe operation for players and observers.

SEGA shall not be held responsible for damage or compensation for damage
to a third party, resulting from the failure to observe this instruction.

For the operation of this machine, please secure a minimum area of 1.4m (D) and

1.48m (W)

Be sure to provide sufcient space specied in this manual. Do not allow objects
to block the ventilation ports. It can cause generation of heat and a re.

Sufcient space either side of the playing area must be allowed for the player to

enter or exit the game safely.

OPERATION AREA (SINGLE CABINET)

0.15m

1.4m

1.48m

0.15m

6

PRECAUTIONS REGARDING INSTALLATION LOCATION

2

To install this product, the entrance must be at least 0.84m in width and 2.03
m in height.

Do not attempt to push/pull the machines whilst holding onto the Controller

or Assy Billboard. This may result in part damage and or personal injury.

2.03m

0.84m

PRECAUTIONS REGARDING PRODUCT OPERATION

7

3

In order to avoid accidents, check the following before starting the operation:

• To ensure maximum safety for the players and the customers, ensure that
where the product is operated has sufcient lighting to allow any warnings to
be read. Operation under insufcient lighting can cause bodily contact with
each other, hitting accident, and/or trouble between customers.

• It is suggested to ensure a space allowing the players who feel sick while

playing the game to take a rest.

• Check if all of the adjusters are in contact with the surface. If they are not,

the Cabinet can move and cause an accident.

• Do not put any heavy item on this product. Items, if placed on this product
may fall and cause injury to the player / observer.

• Do not climb on the product. Climbing on the product can cause falling

down accidents. To check the top portion of the product, use a step ladder.

• To avoid electric shock, check that all doors and covers are inplace and in

good condition

• To avoid electric shock, short circuit and or parts damage, do not put the

following items on or in the periphery of the product. Flower vases,

owerpots, cups, water tanks, cosmetics, and receptacles/containers/

vessels containing chemicals or water.

3 PRECAUTIONS REGARDING OPERATION

To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.

ADJUSTER

Fasten the nuts in an
upward direction.

Keep Casters at floor level ­Adjust to come into contact with floor

ADJUSTER

CASTER

8

PRECAUTIONS REGARDING PRODUCT OPERATION

3

• It is recommended that wet towels (paper towels) be provided.

• To avoid electric shock, ensure that all covers and panels are undamaged
and tted. Do not operate with covers removed.

• To avoid electric shock, short circuit and/or parts damage, do not put the

following items on or in the periphery of the product.

• Flower vases, owerpots, cups, water tanks, cosmetics, and receptacles/
containers/vessels containing chemicals and water.

• To avoid injury, be sure to provide sufcient space by considering the
potentially crowded situation at the installation location. Insufcient installation

space can cause making bodily contact with each other, hitting accidents,

and/or trouble between customers.

• Everyday when cleaning the Controllers, inspect the controllers and make sure

that there are no cracks in the surface, and that the fastening screws are not
loose. If the game is played with cracks or loose screws, it can cause injuries
to the player.

PRECAUTIONS REGARDING PRODUCT OPERATION

9

3

To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors
and players.

• For safety reasons, do not allow any of the following people to play the game.

• Those who have high blood pressure or a heart problem.

• Those who have experienced muscle convulsion or loss of consciousness

when playing video games, etc.

• Those who have neck or spinal cord problems.

• Those who are intoxicated or under the inuence of drugs.

• Pregnant women.

• Those who are not in good health.

• Those who do not follow the attendant’s instructions.

• Those who cannot grasp the Control Unit securely because of immobility in
ngers, hands or arms.

• Persons who disregard the product's warning displays.

• This product is intended for a single player only. Having two or more

persons simultaneously playing this product can result to injury to the player
and possible damage to the product.

• Even players who have never been adversely affected by light stimulus might

experience dizziness or headache depending on their physical condition
when playing the game.

• Small children are especially likely to experience these symptoms.

Caution guardians of small children to keep watch on their children during
play.

• Instruct those who feel sick during play to have a medical examination.

• To avoid injury from falls and electric shocks due to spilled drinks, instruct the

player not to place heavy items or drinks on the product.

• To avoid electric shocks and short circuits, do not allow customers to put
hands and ngers or extraneous matter in the openings of the product or small

openings in or around the doors.

• To avoid falls and resulting injury, immediately stop the customer from leaning

against or climbing on the product, etc.

• To avoid electric shock and short circuit, do not allow customers to unplug the
power plug without a justiable reason.

• Instruct the guardians of small children to keep an eye on their children.

• Children cannot sense danger. Allowing small children to get near

a player who is playing the game could result in the children being bumped,
struck or knocked down.

DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)

10

PART DESCRIPTIONS

4

4 PART DESCRIPTIONS

Billboard

Upper Feature Wheel

Prize LED

Left Handle

Right Handle

Console Cabi

Ticket Vend L

Ticket Vend R

Cashbox Door

Inner Disc Lower

Inner Disc Upper

Cabinet Base

Console Lid

Please note: Cabinets may vary from that illustrated.

ACCESSORIES

11

5

5 ACCESSORIES

Conrm that the accessories listed in the table below are present when setting up the product.
Accessories marked “Spare” in the note column are consumable items but included as spares.

DESCRIPTION: OWNER’S MANUAL
Part No. (Qty.):

420-00XXUK(1)

Parts not labeled with part numbers are as yet

unregistered or cannot be registered. Be sure to handle
all parts with care, as some parts are not available for
purchase separately.

POWER CORD

LM1227 (1) <UK>

LM1226 (1) <EU>

or

LM1226 (1) <US>

For installation. See chapter 6.

440-CS0186UK

Sticker C Epilepsy Multi (1)

KEY

(2)

For the cashbox door

(Located inside the coin chute door at time

of shipment)

KEY MASTER

220-5575-01UK (4)

For operating/closing the doors

12

ACCESSORIES

5

DISC INNER UPPER LOWER OUTER SIDE FRONT TOP

DB-1023UK
For differnt prize values

ASSEMBL Y AND INST ALLATION

13

6

6 ASSEMBLY AND INSTALLATION

• Perform assembly work by following the procedure herein stated. Failure to

comply with the instructions can cause electric shock.

• Perform assembly as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specied performance.

• When assembling, more than one person is required. Depending on the

assembly work, there are some cases in which working by one person alone can
cause personal injury or parts damage.

• Ensure that connectors are properly connected. Improper connections can

cause electric shock.

• Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of re.

• Do not unnecessarily push the display screen.

• This work should be carried out by site maintenance personnel or other
qualied professionals. Work performed by non-technical personnel can cause a

severe accident such as electric shock. Failing to comply with this instruction can
cause a severe accident such as electric shock to the player during operation. If
no one with proper technological expertise is available, request service from the

ofce indicated in this document or the point of purchase so as to ensure safety.

• Provide sufcient space so that assembling can be performed. Performing work

in places with narrow space or low ceiling may cause an accident and assembly

work to be difcult.

• To perform work safely and avoid serious accident such as the cabinet falling

down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.

• This product does not use any connectors other than those connected to and

used by the game board when it leaves the factory. Do not needlessly connect
wires to unused connectors. This could lead to overheating, generation of smoke
and burn related injuries.

• Handle molded parts with care. Excessive weight or pressure may cause them

to break and the broken pieces may cause injury.

• To perform the operation safely and accurately you must use a safe, steady

footstool or stepladder. Working without this may lead to a fall and possible injury.

14

ASSEMBL Y AND INST ALLATION

6

Tools required for installation

• Billboard weighs approximately 10kg once assembled. Have at least 2 people

during this operation. Working alone could result in personal injuries, etc.

• To perform work safely and securely, be sure to prepare a step which is in a

safe and stable condition. Performing work without using a step may lead to injury
of damage to components.

Allen Key nos 4, 5 and 6 (M5) (M6) (M8)

- Attaching Billboard Panel to Assy Billboard.

Adjustable Spanner / Wrenck

- Adjust Leg Levellers

M8 Socket wrench or Spanner

- Attaching Billboard

Step or Step Ladder

6-1 INSTALLING THE CABINET

ASSEMBL Y AND INST ALLATION

15

6

Please note that some xings are placed within the cashbox of the product,

other xings may be attached to the cabinet at the points required.

DB-0504UK SPCER STANDOFF LONG (4)

280-6696UK 5.5-20X6.3 WSHR SPCL AL (4)

020-000510-0C M5X10 SKT CAP BZP (4)

020-000625-0C M6X25 SKT CAP CRM (6)

030-000525 M5X25 BLT PAS (4)

020-F00850-0Z - M8X50 SKT CSK 0Z (1)

020-F00820-0Z - M8X20 SKT CSK 0Z (2)

060-S00500 M5 WSHR SPR PAS (4)

060-S00800 M8 WSHR SPR PAS (3)

068-552016 M5 WSHR 20OD FLT PAS (4)

068-852216-0B M8 WSHR 22OD FLT BLK (4)

Fixings required for installation

16

ASSEMBL Y AND INST ALLATION

6

1

Locate the parts to assemble the ASSY BILLBOARD within the INST KIT BOX.

2

Fit the BILLBOARD COVER to the BILLBOARD SURROUND and x from the rear using (4) M5x25

HEX BLT PAS, (4) M5 SPRING WSHR (4) M5 FLT WSHR and (4) SPACER STAND OFF LONG.

6-1-1 ASSEMBLING THE BILLBOARD

DB-0501UK - BILLBOARD SURROUND (1)

DB-0502UK BILLBOARD COVER (1)

DB-0503UK BILLBOARD FRONT FACE (1)

M5x25 BLT, , M5 SPRING WSHR & M5 FLT WSHR

M5 SPACER STANDOFF LONG

3

Fit the BILLBOARD FRONT FACE to the M5 SPACER STANDOFF LONG. Place the (4) M5 WSHR

SPECL AL over the STANDOFF LONG and secure using the (4) M5x10 SKT CAP CRM.

M5X10 SKT CAP CRM

BILLBOARD FRONT FACE

M5 WSHR SPECL AL

Please note - Take not to overtighted xings as it may damage the acrylics.

ASSEMBL Y AND INST ALLATION

17

6

6-1-2 FITTING THE BILLBOARD

1

Remove the BACK PANEL by unscrewing the (8) M6x25 Socket Cap Screws.

• Billboard weighs approximately 10kg once assembled. Have at least 2 people

during this operation. Working alone could result in personal injuries, etc.

• To perform work safely and securely, be sure to prepare a step which is in a

safe and stable condition. Performing work without using a step may lead to injury
of damage to components.

M6X25 SKT CAP BLK (8)

18

ASSEMBL Y AND INST ALLATION

6

2

Using a step and 2 people, offer the ASSY BILLBOARD up to the cabinet. Connect the harness for the

BILLBOARD LEDS making sure that the harness is positioned behind the cabinet frame.

3

Once the ASSY BILLBOARD is located rmly into position secure it by tting (2) M8x20 SKT CAP with

M8 SPR WSH ans M8 FLT

4

Fit and secure (1) M8x50 SKT CAP, M8 SPR WSH, M8 FLT WSHR to the underside of the BILLBOARD.

Billboard Harness

020-F00820-0Z - M8X20 SKT CSK 0Z (2)

060-S00800 M8 WSHR SPR PAS (2)

068-852216-0B M8 WSHR 22OD FLT BLK (2)

020-F00850-0Z - M8X50 SKT CSK 0Z (1)

060-S00800 M8 WSHR SPR PAS (1)

068-852216-0B M8 WSHR 22OD FLT BLK (1)

ASSEMBL Y AND INST ALLATION

19

6

5

Ret the BACK PANEL.

M6X25 SKT CAP BLK (8)

20

ASSEMBL Y AND INST ALLATION

6

6-1-3 FITTING THE SEGMENT SIDES

1

Fit and secure the SEGMENT SIDES over the SPEAKER UNIT and secure using (3) per M6x25 SKT CAP

CRM.

020-000625-0C M6X25 SKT CAP CRM (6)

ASSEMBL Y AND INST ALLATION

21

6

6-1-4 INSTALLING TICKETS

1

Ensure the machine is powered off

2

Open the Console cabinet lid to access the ticket units and ticket holders.

3

Locate the ticket unit and remove the ticket guide.

4

Using your index nger, lift the roller bar and lock it into the upper position.

This game comes with (2) ticket units installed.. The purpose of these 2 units is so that the game can operate with
twice the amount of tickets as a game with only a single unit. The ticket operation is such that when one unit

despenses its nal ticket the remainder of that win will be paid to the player via the second ticket unit. The second

ticket unit will continue to operated and pay tickets to the customer until the rst unit is relled.

Console lid

Ticket guide

Roller bar