BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
To maintain the safety:
To ensure the safe usage of the product, be sure to read the following before using the product. The
following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufciently understanding the warning displays and
cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the
potentially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this warning
will cause a potentially hazardous
WARNING!
situation which can result in death
or serious injury.
CAUTION!
Indicates that mishandling the product
by disregarding this caution will cause
a slight hazardous situation which can
result in personal injury and or material
damage.
For the safe usage of the product, the following pictographs are used:
Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment,
this display is attached to places where the Owner’s Manual and or Service Manual should
be referred to.
Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to
perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the
serviceman should perform such work.
Be sure to turn off power before working on the machine.
To prevent electric shock, be sure to turn off power before starting the work in which the worker touches
the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual
herein always states to that effect.
Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord
with earth is used).
This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the
Control equipment, ensure that the Earth Wire is rmly connected to the Control equipment.
Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.
This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not
equipped with the Earth Leakage Breaker can cause a re when earth leakage occurs.
Be sure to use fuses which meet the specied rating. (only for the machines which use fuses).
Using fuses exceeding the specied rating can cause a re and electric shock.
Specication changes (removal of equipment, conversion and addition) not designated by SEGA
are not allowed.
The parts of the product include warning labels for safety, covers for personal protection, etc. It is
very hazardous to operate the product by removing parts and or modifying the circuits. Should doors,
lids and protective parts be damaged or lost, refrain from operating the product, and contact where the
product was purchased from or the ofce herein stated. SEGA shall not be held responsible for any
accidents, compensation for damage to a third party, resulting from the specications not designated by
SEGA.
Ensure that the product meets the requirements of appropriate Electrical Specications.
Before installing the product, check for Electrical Specications. SEGA products have a nameplate
on which Electrical Specications are described. Ensure that the product is compatible with the power
supply voltage and frequency requirements of the location. Using any Electrical Specications different
from the designated Specications can cause a re and electric shock.
Install and operate the product in places where appropriate lighting is available, allowing warning
labels to be clearly read.
To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated
has sufcient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the ofce herein stated.
When handling the Monitor, be very careful. (Applies only to the product w/monitor.)
Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some
portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be
performed only be those technical personnel who have knowledge of electricity and technical expertise.
Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.)
Do not operate the product leaving on-screen ickering or blurring as it is. Using the product with the
monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers.
When transporting or reselling this product, be sure to attach this manual to the product.
In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the specic Instruction
Manual of such equipment.
•
Descriptions herein contained may be subject to improvement changes without notice.
•
The contents described herein are fully prepared with due care. However, should any question arise or
errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after
transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before
turning on power, check the following points to ensure that the product has been transported in a satisfactory status.
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are Casters and Adjusters, damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct direction,
connector connections can not be made accurately. Do not insert connectors forcibly.
Do power cords have cuts and dents?
Do the fuses used meet specied rating? Is the Circuit Protector in an energized status?
Are all accessories available?
Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be rmly closed?
1 TOP ASSY DERBY OWNERS CLUB (D-1/2)
Recommeded Dimensions
1
www.seuservice.com
3
www.seuservice.com
1 TOP ASSY DERBY OWNERS CLUB (D-2/2)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1000 ASSY MAIN PROJECTION
2 DOC-1200 ASSY SATELLITE
7 421-7020 STICKER CAUTION FORK
11 440-WS0001XEG STICKER W NOT OPEN DOOR ENG
12 440-WS0002XEG STICKER W POWER OFF ENG
13 SGM-4516 POLY COVER 950×950×1100
19 SGM-4517 POLY COVER 1780×860×730
401 220-5576 KEY MASTER FOR 220-5575
402 SGM-4111 KEY BAG (SGB-1035X)
403 420-6679 OWNERS MANUAL DOC WE ENG
404 420-6680 SERVICE MANUAL DOC WE ENG
405 420-6681 PARTS CAT DOC WE ENG
406 601-6604-70 CARTON BOX 70
407 422-0887 PLAY INSTR DOC WE 1000S
408 DOC-0011-01 PLAY INSTR BOX DOC ENG
409 600-6664-02 WIRE HARN EARTH W/LUG M6 TAIWAN
410 600-6618 AC CABLE CONNECT TYPE FOR EXP AC 220~240V AREA
600-6619 AC CABLE CONNECT TYPE FOR UK HONG KONG
600-6695 AC CABLE CONNECT TYPE USA 15A USA
600-7217 AC CABLE CONNECT TYPE 13A 3P
600-7219 AC CABLE CONNECT TYPE 13A 3P 3M TAIWAN
600-7220 AC CABLE CONN TYPE 13A 3P W/SH
411 390-5761 LAMP 110V 15W
412 280-5009-01 CORD CLAMP 21
413 280-6609 REPEAT TIE RF140
414 600-6275-0500 ASSY FIBER CABLE 5 0500CM
415 600-6275-0700 ASSY FIBER CABLE 5 0700CM
416 600-6275-1000 ASSY FIBER CABLE 5 1000CM
417 211-5479-01 CONN OPT JOINT(TOCA150S)
418 601-10878-01 CLEANING KIT 8 SHEETS
419 601-10879-01 CARD PACKAGE DOC 500 ENG
420 420-6455-01 SERVICE MANUAL NAOMI ENG
421 540-5036-5000 FUSE 6.4×30 5000MA 125V
422 390-6677-038 LAMP WB 14V 3.8A
/ DOC-1303 POP PNL DOC BASE
/ DOC-1500 POP PNL DOC WE
/ 421-6690-06 STICKER 110V AC 110V AREA
/ 421-6690-01 STICKER 120V AC 120V AREA
/ 421-6690-03 STICKER 220V AC 220V AREA
/ 421-6120-92 STICKER SEGA USA USA
www.seuservice.com
2
2 ASSY MAIN PROJECTION (DOC-1000) (D-1/3)
3
www.seuservice.com
5
www.seuservice.com
2 ASSY MAIN PROJECTION (DOC-1000) (D-2/3)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1001 ASSY TV MASK LONG
2 DOC-1196 ASSY TV MASK UPPER
4 DOC-1004 FRONT COVER
9 DOC-1019 FRONT COVER BRKT SHORT
10 DOC-1016 WIRE COVER BACK SIDE R
11 DOC-1018 WIRE COVER TOP
12 DOC-1020 ASSY PROJECTION STAND R
13 DOC-1030 ASSY PROJECTION STAND L
14 DOC-1050 ASSY SIDE FRAME R
15 DOC-1080 ASSY SIDE FRAME L
16 DOC-1100 ASSY BILLBOARD CENTER
17 DOC-1141 BILLBOARD BASE R
18 DOC-1151 BILLBOARD BASE L
19 DOC-1160 BILLBOARD LAMP UNIT R
20 DOC-1170 BILLBOARD LAMP UNIT L
21 DOC-1181 JOINT L BRKT UNDER
22 DOC-1182 PROJECTION JOINT A
23 DOC-1183 PROJECTION JOINT B
24 DOC-1184 PROJECTION JOINT C
25 DOC-1185 PROJECTION JOINT PLATE
26 DOC-1186 PROJECTION JOINT D
27 DOC-1189 JOINT L BRKT TOP
28 DOC-1076 SIDE FRAME BRKT TOP
29 DOC-1130 ASSY TRUMPET R
30 DOC-1135 ASSY TRUMPET L
31 DOC-1187 PROJECTION JOINT TOP A
32 DOC-1188 PROJECTION JOINT TOP B
33 DOC-1155 ASSY MIRROR
101 200-5922-31R PJTN DSPL M 50TYPE 31K R
200-5952-31 PJTN DSPL T 50TYPE 31K (JOIN)
102 200-5922-31L PJTN DSPL M 50TYPE 31K L
200-5952-31 PJTN DSPL T 50TYPE 31K (JOIN)
103 280-5009-01 CORD CLAMP 21
301 DOC-60078 WIRE HARN LAMP M EXT 2
302 DOC-60079 WIRE HARN FL M EXT 2
/ DOC-1501 STICKER FRONT L DOC WE
/ DOC-1502 STICKER FRONT R DOC WE
5
www.seuservice.com
7
www.seuservice.com
3 ASSY TV MASK L ONG (DOC-1001)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1191 TV MASK LONG
2 DOC-1009 TV MASK SPONGE 508
3 DOC-1011 EDGE GUARD A WHITE
4 DOC-1012 EDGE GUARD B WHITE
201 010-F00410 AS-TITE SCR FH M4×10
www.seuservice.com
6
4 ASSY TV MASK UPPER (DOC-1196)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1197 TV MASK UPPER
2 DOC-1010 TV MASK SPONGE 637
3 DOC-1013 EDGE GUARD A BLACK
4 DOC-1014 EDGE GUARD B BLACK
201 010-F00410-B S-TITE SCR FH BLK M4×10
7
www.seuservice.com
9
www.seuservice.com
5 ASSY PROJECTION STAND R (DOC-1020)
SECTION A-A
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1021 SUBCABI PROJECTION STAND R
2 DOC-4000 ASSY ELEC BASE
4 DOC-1025 FIBER GUIDE PTV
201 000-P00430-W M SCR PH W/FS M4×30
202 000-P00420-W M SCR PH W/FS M4×20
203 068-441616 FLT WSHR 4.4-16×1.6
www.seuservice.com
8
6 SUBCABI PROJECTION STAND R (DOC-1021) (D-1/2)
Detals of PART B
B
C
D
Detals of PART D
Detals of PART C
9
www.seuservice.com
11
www.seuservice.com
6 SUBCABI PROJECTION STAND R (DOC-1021) (D-2/2)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1022X PROJECTION STAND R
2 DOC-1023 MAINTENANCE DOOR R
3 DOC-1024 BACK MAINTENANCE DOOR R
4 105-5340-01 FAN BRKT LONG
5 253-5460-01 AIR VENT BLACK
6 117-0062 PLATE LOCK RETAINER
7 117-0063 PLATE TONGUE RETAINER
8 DP-1148X LKG TNG
9 BJH-1209 LEG BRKT
10 DOC-1026 EDGE GUARD
11 DOC-1027 NUT PLATE FOR LEG BRKT 80
12 SCR-1008 NUT PLATE FOR CASTER
13 DOC-1090 AC UNIT
201 000-T00430-0B M SCR TH BLK M4×30
202 000-T00420-0B M SCR TH BLK M4×20
203 011-P00312 TAP SCR PH 3×12
204 030-000630-S HEX BLT W/S M6×30
205 060-F00600 FLT WSHR M6
206 000-P00416-WB M SCR PH W/FS BLK M4×16
207 079-000008 SCR NAIL THH STNLS 1.5×16
208 050-H01600 HEX NUT M16
209 000-P00416-W M SCR PH W/FS M4×16
210 011-F00310 TAP SCR FH 3×10
309 DOC-60093 WIRE HARN RGB R
310 DOC-6051 ASSY WIRE REAR
311 DOC-6052 ASSY WIRE SIDE R
/ DOC-4210 ASSY TRANS 200V LINES AC 220~240V AREA
/ DOC-4200 ASSY TRANS 100V LINES AC 110~120V AREA
/ 030-000630-S HEX BLT W/S M6×30
/ 068-652016 FLT WSHR 6.5-20×1.6
www.seuservice.com
10
7 ASSY PROJECTION STAND L (DOC-1030)
SECTION A-A
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1031 SUBCABI PROJECTION STAND L
3 DOC-4100 ASSY AMP UNIT
4 DOC-1025 FIBER GUIDE PTV
201 000-P00430-W M SCR PH W/FS M4×30
202 000-P00420-W M SCR PH W/FS M4×20
203 068-441616 FLT WSHR 4.4-16×1.6
11
www.seuservice.com
13
www.seuservice.com
8 SUBCABI PROJECTION STAND L (DOC-1031) (D-1/2)
Detals of PART D
Detals of PART C
D
E
C
B
www.seuservice.com
Detals of PART E
12
Detals of PART B
8 SUBCABI PROJECTION STAND L (DOC-1031) (D-2/2)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1032 PROJECTION STAND L
2 DOC-1033 MAINTENANCE DOOR L
3 DOC-1034 SERVICE DOOR
4 105-5340-01 FAN BRKT LONG
5 253-5460-01 AIR VENT BLACK
6 117-0062 PLATE LOCK RETAINER
7 117-0063 PLATE TONGUE RETAINER
8 DP-1148X LKG TNG
9 BJH-1209 LEG BRKT
10 105-5416 HINGE 15-38
11 DOC-1036 BACK MAINTENANCE DOOR L
12 DOC-1026 EDGE GUARD
13 DOC-1027 NUT PLATE FOR LEG BRKT 80
14 SCR-1008 NUT PLATE FOR CASTER
15 DOC-1040 SW UNIT
16 DOC-1035 SW UNIT BRKT
201 000-T00430-0B M SCR TH BLK M4×30
202 000-T00420-0B M SCR TH BLK M4×20
203 011-P00312 TAP SCR PH 3×12
204 030-000630-S HEX BLT W/S M6×30
205 060-F00600 FLT WSHR M6
207 079-000008 SCR NAIL THH STNLS 1.5×16
208 050-H01600 HEX NUT M16
209 000-P00312-W M SCR PH W/FS M3×12
210 011-F00310 TAP SCR FH 3×10
211 011-F03516 TAP SCR FH 3.5×16
212 050-F00400 FLG NUT M4
213 000-P00525-W M SCR PH W/FS M5×25
214 000-P00410-WB M SCR PH BLK W/FS M4×10
307 DOC-60092 WIRE HARN RGB L
308 DOC-6053 ASSY WIRE SIDE L
309 600-6972-2200 WIRE HARN EARTH ID5 2200MM
13
www.seuservice.com
15
www.seuservice.com
9 SW UNIT (DOC-1040)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1041 SW UNIT BOX
101 509-5028 SW PB 1M (MIYAMA DS-412R)
102 220-5179 VOL CONT B-5K OHM
103 601-0042 KNOB 22MM
104 310-5029-F20 SUMITUBE F F 20MM
105 601-0460 PLASTIC TIE BELT 100MM
301 DOC-60074 WIRE HARN TEST SERVICE SW M
302 DOC-60075 WIRE HARN SOUND VOL M
www.seuservice.com
14
10 ASSY SIDE FRAME R (DOC-1050) (D-1/2)
SECTION A-A
SECTION C1-C2-C3-C4-C5
SECTION B-B
15
www.seuservice.com
17
www.seuservice.com
10 ASSY SIDE FRAME R (DOC-1050) (D-2/2)
ITEM NO. PART NO. DESCRIPTION NOTE
1 DOC-1051X SIDE FRAME
3 DOC-1053 SIDE NUT PLATE UPPER
4 DOC-1054 SIDE NUT PLATE LOWER
5 DOC-1055 SIDE FRAME BRKT R
6 DOC-1056 SIDE FRAME WIRE COVER R
7 DOC-1058 SIDE FRAME BRKT LOWER
8 DOC-1059 SPEAKER COVER R
9 DOC-1060 WIRE COVER A
10 DOC-1061 WIRE COVER B
11 DOC-1062 ASSY ACRYLIC PLATE
13 DOC-1065X SPEAKER BRKT R
14 DOC-1066X SPEAKER BRKT L
15 DOC-1071 PICTURE BOARD BASE
16 DOC-1072 PICTURE BOARD FRONT
17 DOC-1073 PICTURE BOARD HOLDER
18 DOC-1074 RUBBER WASHER FRONT
19 DOC-1075 RUBBER WASHER BACK
20 DOC-1077 FL COVER
21 DOC-1194 PICTURE SHEET
22 DOC-1195 STICKER FL COVER
23 DOC-1057 SIDE FRAME WIRE COVER S
24 253-5457 FL HOLDER OTHERS
Locally supplied. USA
26 421-7501-12 STICKER FL 15W OTHERS
Locally supplied. USA
27 440-WS0141-EG STICKER W HIGH TEMP S ENG
28 DOC-1051X-D EDGE GUARD
101 390-6659-15EX ASSY FL15W EX W/CONN HIGH S CE OTHERS
Locally supplied. USA
102 130-5183-01 SPEAKER OE-637 L
103 130-5183-02 SPEAKER OE-637 R
105 280-5009-01 CORD CLAMP 21
106 280-5277 CORD CLAMP 18
1 DOC-1051X SIDE FRAME
3 DOC-1053 SIDE NUT PLATE UPPER
4 DOC-1054 SIDE NUT PLATE LOWER
5 DOC-1085 SIDE FRAME BRKT L
6 DOC-1086 SIDE FRAME WIRE COVER L
7 DOC-1058 SIDE FRAME BRKT LOWER
8 DOC-1089 SPEAKER COVER L
9 DOC-1060 WIRE COVER A
10 DOC-1061 WIRE COVER B
11 DOC-1062 ASSY ACRYLIC PLATE
13 DOC-1065X SPEAKER BRKT R
14 DOC-1066X SPEAKER BRKT L
15 DOC-1071 PICTURE BOARD BASE
16 DOC-1072 PICTURE BOARD FRONT
17 DOC-1073 PICTURE BOARD HOLDER
18 DOC-1074 RUBBER WASHER FRONT
19 DOC-1075 RUBBER WASHER BACK
20 DOC-1077 FL COVER
21 DOC-1194 PICTURE SHEET
22 DOC-1195 STICKER FL COVER
23 DOC-1057 SIDE FRAME WIRE COVER S
24 253-5457 FL HOLDER OTHERS
Locally supplied. USA
26 421-7501-12 STICKER FL 15W OTHERS
Locally supplied. USA
27 440-WS0141-EG STICKER W HIGH TEMP S ENG
28 DOC-1051X-D EDGE GUARD
101 390-6659-15EX ASSY FL15W EX W/CONN HIGH S CE OTHERS
Locally supplied. USA
102 130-5183-01 SPEAKER OE-637 L
103 130-5183-02 SPEAKER OE-637 R
105 280-5009-01 CORD CLAMP 21
106 280-5277 CORD CLAMP 18